Memo. No. 3273/NKDA /Engg-36/2010(XV)- Renovation of the kitchen adjacent to the 4th floor Conference Room to convert it into a Small Conference Room with allied furniture and electrical work

Amount

Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars (b) Extra rate for each addl floor over the rate of ground floor. at 4th Floor

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value > 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U1520).

Supplying, fitting & fixing of various colour and design Wall paper, pasting over the existing smooth wall / glass wall, approved design, colour and brand & as per direction of EIC, scraping the existing wall, removing of loose scales etc. including all necessary accessories, labour, scaffolding, loading & unloading and inclusive all other taxes complete.

Supply, Installation and placement of unitzed 10 seater Conference Table from ISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from IAF recognized accreditation body), BIFMA (membership), AIOTA, Green guard (by UL) , indoor air quality, GRIHA, SEDEX certified manufacturer.Overall dimension in mm (3000x1150x740) (WxDxH). Work Surface: Made of 36mm thick MDF one side prelaminate board conforming to IS14587: 1998 and having chamfered edge. Full length access panel is provided with soft closing hinges in line with worktop edge. Understructure: The understructure consists of mixture of 18mm and 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Aluminium alloy 63400 - WP profile is used for connecting panels together. Modesty: Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Wire Management: An array of panels made of 0.8mm and 1.2 mm CRCA MS IS:513, epoxy polyester powder coated (DFT 40-60 microns) is used for flow of wires and cables. Cutout for Standard Anchor Roma 4 module is provided for electrical fittings in Straight two seater and single seater modules below access flap per seat.As per direction of Engineer-In-Charge.

Supply, Installation and placement of Full Back Chair With Headrest fromISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from IAF recognized accreditation body), BIFMA (membership), AIOTA, Green guard (by UL) , indoor air quality, GRIHA, SEDEX certified manufacturer. SEAT ASSEMBLY: The seat should be made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam.SEAT SIZE: 51.8cm (W) x 49.7cm (D) ,BACK ASSEMBLY: The Back should be injection moulded in glass filled Polypropylene which should be 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm.BACK SIZE: 47.9 cm(W) x 66.9 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam should be moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per should be :7888 for 25% compression.ARMRESTS (ADJUSTABLE):The height adjustable armrest should be made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should be designed with the following features:360° revolving type Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort,Till tension adjustment can be operated in seating position,5 position Tilt limiter giving option of variable sit angle to the chair,Seat/back tilting ratio of 1:2 .The mechanism housing should be made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron).HEADREST The Headrest sub-assembly should be made up of injection moulded glass filed Polypropylene which should be upholstered with moulded HR polyurethane loam and fabric has an adjustment of 3.00.1cm & it should be assembled over GRETA 20F The complete headrest assembly should be retro fic to the main chair.PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm.PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors).TWIN WHEEL CASTORS: The twin wheel castors should be Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter. WIDTH (W) - 76.0cm,DEPTH (D) - 76.0cm,HEIGHT (H) - 114.0 cm- 123.5cm,SEAT HEIGHT - 43.5 - 54.0cm.

Supply, Installation and placement of Full Back Chair Without Headrest fromISO 9001:2015, ISO 50001:2018, ISO 45001:2018, ISO 14001:2015 (All ISO certificate must be from IAF recognized accreditation body), BIFMA (membership), AIOTA, Green guard (by UL) , indoor air quality, GRIHA, SEDEX certified manufacturer .SEAT ASSEMBLY: The seat should be made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam.SEAT SIZE: 51.8cm (W) x 49.7cm (D) ,BACK ASSEMBLY: The Back should be injection moulded in glass filled Polypropylene which should be 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm.BACK SIZE: 47.9 cm(W) x 66.9 cm (H).HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam should be moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per should be :7888 for 25% compression.ARMRESTS (ADJUSTABLE):The height adjustable armrest should be made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtop ACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism should be designed with the following features:360° revolving type Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort,Till tension adjustment can be operated in seating position,5 position Tilt limiter giving option of variable sit angle to the chair,Seat/back tilting ratio of 1:2 .The mechanism housing should be made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron).PEDESTAL ASSEMBLY: The pedestal should be injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia should be 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors).TWIN WHEEL CASTORS: The twin wheel castors should be Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter.WIDTH (W) - 76.0cm,DEPTH (D) - 76.0cm,HEIGHT (H) - 114.0 cm-123.5cm,SEAT HEIGHT - 43.5 - 54.0cm.As per direction of Engineer-In-Charge.

PART B-Electrucal Work

2 Ton 3 star Split type model your 2023/2024 Air Condition Machine

Additional duuble run Approx 15 mtr Cu pipe

AC Starter

36 watt LED Light

450 mm wall Fan

Distribution wiring

Light Fan point wiring

Plug point wiring

A. B. ENTERPRISE

MODERN ENTERPRISE

VINAYAK ENTERPRISE