8593/E8

Amount

Dismantling plain corrugated steel sheeting of any gauge/thickness including Nainital and similar pattern all as specified and directed.

Dismantling wrought iron or mild steel of any description all as specified and directed.

Dismantling wall and ceiling board of any thickness including cover fillets all as specified and directed.

Demolition of cement concrete in ground floor and paving exc 15 cm thickness (below or above ground level) all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position all as specified and directed.

Dismantling 100 mm dia CI pipes jointed in cement mortar and taking out of trenches if required all as specified and directed.

M&L 100 mm dia CI pipe (sand cast) soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floors all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40 mm gradded crushed stone aggregate) for concrete bed to 100 mm dia drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) area exceeding 1.5 sqm but not exceeding 4 sqm each all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutters from the frame) area nexc 1.50 sqm each all as specified and directed.

Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete all as specified and directed.

M&L RCC M-25 grae design mix (using 20 mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete all as specified and directed.

M&L RCC M 25 grade , design mix (using 20mm graded crushed stone aggragate) for lintel beam, cantilevers, bressummers all as specified and directed.

M&L RCC M 25 grade design mix (using 20mm graded crushed stone aggragate) for chajjas all as specified and directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter flat fair finished surfaces all as specified and directed.

Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports over hangs all as specified and directed.

Use and waste formwork to chullah hoods, chajjas, troughs and similar items including edges in flat rough finished surfaces all as specified and directed.

M&L mild steel TMT steel bars in reinforcement 10mm dia and over cut to length bent to shape required including cranking binding spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

M&L mild steel TMT steel bars in reinforcement 5mm dia and over up to 10mm dia in stirrups cut to length bent to shape required including cranking binding spirally, hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

M&L precast cement concrete 1:3:6 type C1 using 20mm graded crushed stone aggregate as in solid building blocks, exc. 10cm in width and setting in CM (1:6) all as specified and directed.

M&L DPC 40mm thick in cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork all as specified and directed..

M&L plastering 15mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finished surfaces even and smooth withot using extra cement all as specified and directed.

M&L plastering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) finished surfaces even and smooth without using extra cement all as specified and directed.

M&L preparation of new surfaces of wall of any description and applying three coat of white wash all as specified and as directed.

M&L for preparing new plastered surfaces and applying two coat of distemper oil emulsion over a coat of wall putty as priming coat on internal walls all as specified and directed.

M&L preparing new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer on external walls surfaces all as specified and directed.

M&L preparing new plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer on external walls surfaces all as specified and directed.

S&F mild steel rolled sections as in roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc. ( Fe 410-W (Gde E-250) quality A) all as specified and directed.

S&F mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates ( Fe 410-W (Gde E-250) quality A) all as specified and directed.

S&F plates (plain or chequered) channels. square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410 -W (Gde- E- 250) quality- A, all as specified and directed.

S&F mild steel bolts, purpose made, dia of bolt exc 16 but nexc 20 mm with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 15 cm long but not exc. 22.5 cm long all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping scrws all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

S&F frame work for suspended false ceiling GI exposed ceiling suspension system of grid size 600mm/600mm with main runner 38mmx24mm, cross tee 29mmx24mm and wall angle 24mmx24mm including 6 mm dia GI/MS bar hanger fixing with steel dash fastner or iron purlins from the roof with adjustment clip providing position for light fixture all as specified and directed.

S&F ceiling board for false ceiling of Everest designer boards of size 595mm x 595mmx4mm thick fixed on GI snap grid all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including laid over a screed bed of 15 mm thick in CM 1:6 all as specified and directed.

All as per item No 41 above but on vertical surfaces such as skirting, dados and rises to steps, set , jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10 mm thick in CM 1:4 all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) 25 mm thick in flooring, finished surfaces even and smooth without using extra cement all as specifed and directed.

M&L PCC 1:3:6 type C-2 (using 20 mm graded crushed stone aggregates) as in plinth protection, 75 mm thick, finished surfaces even and smooth without using extra cement all as specified and directed.

M&L glazed ceramic tiles coloured 350 x 250mmx 7mm/450 x 350mm x 7 mm thick in wall/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over rendering 10 mm thick in CM 1:6 on stone masonry surfaces or surfaces other than fair face of brick work/concrete surfaces all as specified and directed.

M&L non skid ceramic coloured tiles 300x300x7 mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match including laid over screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes all as specifed and directed.

S&F solid PVC door frame of size 50 mm x 47 mm, made out or 5 mm, plain colour PVC sheet, reinforced with MS square tube all as specified and directed.

S&F Factory made solid panel PVC door shutter, 30 mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC 'C' chanel on both sides having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on both sides and as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site all as per specification & drawing all as specified and directed.

S&F powder coated aluminium frame & shutters for door, window, ventillators, partition wall, etc including style & rails with standard aluminium section with one or more rebates, including aluminium snap beading all as specified and directed.

S&F rubber beading for fixing glass panes in aluminium frame work all as specified and directed.

S&F prelaminated particle board, 12 mm thick, exterior grade, both side with decorative choice lamination, fixed with screws fixed to aluminium frame work all as specified and directed.

S&F steel ventilator with top hung shutter including hinges, steel peg stay all as specified and directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed.

S&F pin head type glass 4mm thick and glazing with oil putty in squares nexc 0.5 sqm in each all as specified and directed.

S&F 100 mm long stainless steel butt hinges medium weight all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised fixed all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed all as specified and directed.

S&F 100 mm extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-22 all as specified and directed.

Preparing new steel surfaces of any description, not otherwise described, over 10cm width or girth and applying synthetic enamel paint (ordinary tint) (Two coat) over a coat of red oxide primer all as specified and directed.

M&L prepolished chequered cement concrete tiles 25cm x 25cm/ 30cmx30cm x 25mm thick, with grey cement and no pigment, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed or bedding layer of morter in CM 1:6 all as specified and directed

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including provision of lime concrete bedding all as specified and directed.

S&F in repair flushing cistern low level, PVC 10 litres capacity syphonic action type valve, valve less with inlet ball valve, float and handle incluing bracket all as specified and directed.

S&F in repair flush pipe of polythene of low or high density or PVC, 32 mm dia for low level cistern all as specified and directed.

S&F in repair 15mm dia bib taps, cast copper alloy, chromium plated fancy type, screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for brass ferrules and all as specified and directed.

S&F in repair 15mm dia stop valves/angle valve cast copper alloy, chromium plated, fancy type screwed down high pressure, with crutch or butterfly handle screwed with both ends for iron pipe or for union all as specified and directed.

S&F in repair PVC connection 15 mm dia and 450 mm long all as specified and directed.

S&F in repair vitreous china wash hand basin 550x400 mm white flat back excluding taps, waste chain and plug and porcelain stopper but including brackets all as specified and directed.

S&F in repair pillar tap cast copper alloy with capstan head, fancy type chromium plated screwed down high pressure with or without lettered 'Hot or 'cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed all as specified and directed.

S&F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with mild steel chromium plated bracket guard and railing 60cm long all as specified and directed.

S&F 15 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor all as specified and directed

S&F 20 mm bore GI tubing medium grade with all fitting fixed to wall and ceiling or laid in floor all as specified and directed

S&F in repairs rotational moulded polyetylene water storage tanks ISI marked of 500 litres capacity (cylindrical vertical with closed top) with 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule hoisted and fixed in position all as specified in SSR Part-I all as specified and directed.

S&F in repair CP towel rail of 20mm dia with hook 600mm long all as specifed and directed.

S&F in repair door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed all as specified and directed

M&L 75mm PVC(SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipe single socketed of any length with rubber ring joints laid in trenches all as specified and directed.

S&F 75 mm dia PVC (SWR) pipes single socketed fixed in walls and floors or trenches etc. as in weep holes of retaining wall all as specified and directed.

S&F in repairs PVC (SWR) bends any radius 110 mm bore pipe all as specified and directed.

S&F in repair PVC (SWR) bends of any radius 75 mm bore pipe all as specified and directed.

S&F PVC (SWR) 'P' trap bore of 110 mm all as specified and directed.

S&F in repair for vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) all as specified and directed.

S&F in repair for CP urinal spreader for fixing with 15mm dia pipe all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, 150 mm with rubber shoe and fixed in floor all as specified and directed.

S&F in repair soap dish acrylic type all as specified and directed.

M&L precast cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) for manhole covers set in cm 1:6 all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, light fitting etc removing materials to store for keeping in safe custody for taking credit or reuse serviceable fittings/fixtures and making good the disturbed surfaces of wall/floors all as specified and directed.

Dismantelling and taking down old unserviceable existing XLPE cable of any size all as specified and directed.

M&L point wiring concealed type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked plastic laminated sheet cover for fixing switches/socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/fan/bell point controlled by one, one way switch 5/6 Amps all as specified & directed. Make of PVC condut: Kalinga/ Polycab/Plaza ISI Marked and Make of PVC Copper wire : Plaza/Havells/Finolex for the following :-

All as per item No 90 here in before but one socket outlet 5/6 Amps on independent board controlled by one switch.

All as per item No 90 here in before but one socket outlet 5/6 Amps controlled by one switch on same board with other switches

All as per item No 90 here in before but one socket out let 15/16 Amps controlled by one switch on independent board and wiring with 2.5sqmm cable.

M&L point wiring in casing & capping/PVC conduit or concealed at some places as per required at site of size conforming to IS-2079-1973 medium grade on surface with PVC insulated unsheathed multi stranded copper conductor cable type with 1.50sqmm PVC FRLS insulated, unsheathed, single core, multistranded copper conductor cable 1100 volts grade including 1.5sqmm FRLS PVC insulated unsheathed stranded copper conductor cable as earth continuity conductor drawn in and including rigid PVC conduit of suitable size but not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked plastic laminated sheet cover for fixing switches/socket/regulators etc including cutting chases in wall as per standard engineering practice & making good the disturbed surfaces to match with existing for the one light/fan/bell point controlled by one, one way switch 5/6 Amps all as specified & directed. Make of PVC condut: Kalinga/ Polycab/Plaza ISI Marked and Make of PVC Copper wire : Plaza/Havells/Finolex for the following :-

All as per item No 94 here in before but one socket outlet 5/6 Amps on independent board controlled by one switch.

All as per item No 94 here in before but one socket outlet 5/6 Amps controlled by one switch on same board with other switches

S&F switch piano flush type single pole, 5/6 Amps one way, 230 volts all as specified & directed. Make: Cona / SSK / Anchor ISI Marked.

S&F switch piano flush type single pole, 15/16 Amps one way, 230 volts all as specified & directed. Make: Cona / SSK / Anchor ISI Marked.

S&F socket outlet 5/6 Amps flush type piano 5 pin 230 volts all as specified & directed. Make: Cona / SSK / Anchor ISI Marked.

S&F socket outlet 15/16 Amps multipurpose 5 in 1, 230 V all as specified & directed. Make: Cona / SSK / Anchor ISI Marked.

S&F ceiling rose surface bakelite 62.5x25 mm size 3 terminals all as specified & directed. Make: Cona / SSK / Anchor ISI Marked.

S&F lamp holder, insulated body, with back plate suitable for batten fitting all as specified and directed. Make: Cona / SSK / Anchor ISI Marked.

S&F 9 watt LED bulb cool day light 230/240 volts AC supply, all as specified and directed. Make: Surya/Philips/CG/Havells/Syska

S&F lamp holder, insulated body, with back plate suitable for batten fitting all as specified and directed. Make: Cona / SSK / Anchor ISI Marked.

S&F in replacement sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket with one No MCB, SP, 20 Amps, 230 volts, 10KA 'C' series all as specified and directed. Make:-Legrand/Schneider/ Havells.

S&F replacementsurface and wall mounted LED tube light fitting with polycarbonate housing and integrated electronic driver with tube rod of 18 watt slim elegent design HSN code 9405 case lot No 25 and including connected with 3 core 23/0.0076 insulated copper wire frm ceiling rose to fitting connector all as specified and directed. Make: Havells/CG/Philips/Bajaj/Syska.

S&F in replacement surface/wall mounting LED batten 20 watt luminaire having aluminium housing and integrated electronic driver with mounting accessories,4000K color temprature with lamp holders fixed to wall/ ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire of size 0.75 sqmm from ceiling rose to fittings all as specified & directed. Make:Cat part No.LUMILINEPLUSBS20WLED865SPCWH of Havells make or equivalent in Crompton / Phillips.

S&F in replacement, surface mounting type bulkhead 10 watt LED luminaire with reflector cover electronic driver, connector block etc with internally prewired fixed to wall with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings complete all as specified & directed. Make: cat part No- Hexaft10wled857ssymbopc of Havells make or equivalent in Crompton / Phillips.

S&F in replacement, surface round mounting type 12/15 watt LED luminaire with reflector cover electronic driver, connector block etc with internally prewired fixed to ceiling with fixing accessories and connecting up with & including twin twisted copper flexible wire from ceiling rose to fittings all as specified & directed. Make: cat part No- EDGEPRORDDLR15WLED857S of Havells make or equivalent in Crompton / Phillips.

S&F in replacement building security light fitting complete with 15 watt LED type pressure die cast aluminium housing and heat resistant toughtened glass with frame protection and better opticd for uniform distribution fixed bracket made out of GI pipe light grade of suitable size and MS clamp and nut bolts washers complete and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified & directed. Make: Havells model No ENDURA PEARLSL 15 W LED 757SASYTOP/Philips/BAJAJ

S&F in replacement of unserviceable MCB DB sheet metal enclosure single pole and neutral 230 V with 200 Amps standard bus bar of suitable size and common neutral link and earth bar all enclosed on standard steel sheet flush mounting type double door factory fabricate complete without MCB and with encosure blank plates for unused way suitable for 8 way flush in wall all as specified & directed. Make:-Legrand/Schneider/ Havells.

S&F MCB SPN 40 Amps 240 Volts C, series all as specified and directed. Make:-Legrand/Schneider/ Havells.

S&F MCB 6 to 40 Amps SP, 240 Volt C, series all as specified and directed. Make:-Legrand/Schneider/ Havells.

M&L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm size, buried directly in ground (earth pit not less than 2.25 M deep below normal ground level) with top edge of the plate not less than 1.5 M below normal ground level connected to and including galvanised steel earth lead wire of 4 mm dia, including 15 mm bore GI light grade protection pipe upto 1 metre above the floor level of the buildings where main switch, DB etc, situated, earth lead wire connected to the earth plate by means of GI bolts, nuts, washers and earth plate surrounded by 150 mm thick alternate layers of charcoal or cock dust mixed with common salt 20 mm bore medium grade GI watering pipe PCC pit in PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) cover of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) duly reinforced with 8 mm dia TMT bars @ 100 mm c/c both ways, GI wire mesh, GI sheet funnel necessary excavation in soft/ loose soil and deposited the surplus soil to a distance not exceeding 50 metre away from starting point, all as per electrical plate no 3 of SSR part-1 .

M&L in replacement sub main wiring with two runs of single core FRLS PVC insulated, unsheathed, muti stranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC rigid conduit medium grade/PVC casing caping of suitable size but not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, stranded copper conductor cable of size 2.5 sqmm as earth continuity and cutting chases to wall as per standard engineering practice & making good the disturbed surfaces as per existing complete all as specified & directed. Notes:- For payment of sub main wiring, two runs of 4.0 sqmm cable & one run of 2.5 sqmm cable alongwith PVC conduit including its accessories shall be measured and paid as one unit length. Make of PVC condut :Kalinga/ Polycab/Plaza ISI Marked and Make of PVC Copper wire : Plaza/Havells/Finolex.

All as per item No 115 here in before but for socket outlet 15/16 amps on independent board with 4 sqmm size cable and 2.5 sqmm for contuinity earth wire connected to common earth dolly all as specified & directed.

Supply and fixing in replacement, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 16 sqmm 2 core all as specified & directed. Make of XLPE cable : Havells/Polycab/CCI/Universal.

Supply and fixing in replacement, laying & testing of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 10 sqmm 3 core all as specified & directed. Make of XLPE cable : Havells/Polycab/CCI/Universal.

Excavation in trenches nexc 1.5 metre wide and nexc 1.5 metre in depth for laying of underground cable and getting out in hard/dense soil all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick with excavated soil all as specified and directed

Removing excavated soil to a distance nexc 50 metre and deposited where directed at a level nexc 1.5 metre above the starting point all as specified and directed.

Supply and fix in replacement of light grade galvanised mild steel pipe 40mm bore with all fittings, laid under road crossings, drain, paths, fixed to poles/walls with suitable mild steel clamps, bolts, nuts and washers all as specified and directed as for cable proction all as specified and directed. Make :- Jindal/TATA/Prakash surya Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule.

Supply and fix in replacement of light grade galvanised mild steel pipe 25mm bore with all fittings, laid under road crossings, drain, paths, fixed to poles/walls with suitable mild steel clamps, bolts, nuts and washers all as specified and directed as for cable proction all as specified and directed. Make :- Jindal/TATA/Prakash surya Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule.

M&L local sand dry, filling in trenches around under ground cable all as specified and directed. Note :- For the purpose of payment only punned thickness will be measured.

M&L providing new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable all as specified and directed.