SPECIAL REPAIRS TO BLDG NO NP-200 OF 611EME BN AT AHMEDABAD

Amount

Taking down chowkats or frame with shutters (without taking off shutters from the frame) n exc 1.5 sqm each

Taking down Shutters of any description n exc 1 sq. m each

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 Sqm each

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Demolition of Brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc., but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for Brick work with sub class 'B' bricks built in CM (1:6) straight or curved on plan & exc 6m mean radius with old size bricks

M&L for Non Skid ceramic coloured tiles 7mm to 8mm thick, (square or rectangular) area of tile exc 0.18 Sqm but n exc 0.38 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 20mm thick screed bed in CM (1:4)

All as per item above but on vertical surfaces including 10mm thick backing coat of tiles in CM (1:3)

S/F coloured plain/printed glazed tiles of size 300 x 450 x 7 mm, on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10 mm thick rendering in CM 1:4

S/F Non skid coloured plain/printed glazed tiles of size 300 x 300 x 7 mm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

Dismantling asbestos cement (corrugated or semi corrugate, etc.,) sheets in roof covering complete all as specified

S&F prepainted galvanized aluminium zinc coating GI base corrugated steel sheet 0.60mm thick of any colour as directed by GE having tensile strength of 550MPa as in roof covring/clading to wall, fixed with self tapping screws as specified. Complete all as spd and directed (Note: Corrugation shape of sheet shall be approved by GE)

S&F prepainted galvanized aluminium zinc coating GI base plain sheeting steel sheet 0.60mm thick of colour as directed by GE for ridge having tensile strength of 550MPa as as in roof covring/clading to wall, fixed with self tapping screws as specified. Complete all as spd and directed (Note: Corrugation shape of sheet shall be approved by GE)

S&F tinted glass, ordinary quality of 5.5mm thick exc 0.5 sq. m in each pane fixed with rubber gasket and glazing clips all as directed (rubber gasket and glazing clips shall be measured seprately).

S&F for Prelaminated particle board of 9mm thickness, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame work

S&F for mortice lock of braas (4 levers), vertical type,of size 100 mm.

S&F for Butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21

S&F for Butt hinges of size 75mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21

S&F 0.56mm thick plain aluminium sheeting, Alloy 31000H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed)

Taking down cement or lime plaster of any description from stone or brick walls etc., including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified and directed

M&L for 15mm thick rendering on fair faces of brick/concrete surfaces in CM (1:4) finished even and smooth without using extra cement mixed with water proofing compound (Note :- Supply only WPC will be measured & paid separately)

Supply only integral water proofing compound

M&L for 15mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.,) or insulation boards/slabs/blankets, any thickness, including cover fillets

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest) 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction. (Make : METROC or METACIL or any other equivalent as approved by GE)

Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal framework and reinforced with G.I. wire mesh (Fillets, metal frame work andG.I. wire mesh paid separately)

Dismantling timber scantling 40 Sqcm and over in section in any position in unframed work as in rafters, purlins etc,.

Supply & fix rolled mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250)quality A, all as directed.

Dismantling and Refixing of mild rolled steel straps in joist, angle ,channel as in purlins, rafters cleats , ceiling frame etc conforming to fe410 w all as directed by Engr-in-Charge.

S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) conforming to Fe-410-W(Gde-E-250)quality-B including distance pieces, cleats etc, all as directed.

M&L Preparation of old surfaces of wood or wood based materials of any description not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by Engineer-in-Charge.

S&F steel window with side hung shutters including box type hinges with steel handles and steel peg stay complete with glazing bars dove-tailed or welded complete including one coat of shop coat of primer.

S & F anodised Aluminium alloy sections sliding windows with frames Series-C (20mm) and , 3 track sliding shutters duly fitted with neoprene beading, glazing clips, shutters with tinted glass 5mm thick and aluminium wire cloth 0.35mm dia and average width of aperture 1.4mm , aluminium alloy handles etc. complete all as specified and directed.

M&L for brick work with sub class 'B' bricks built in CM (1:4) straight or curved on plan to any radius in half brick thick walls with old size bricks.

Supply & fix mild steel angle iron work as in doors frames, conforming to Fe- 410-W(Gde-E-250)quality A and complete all as specified.

S&F for butt hinges 100mm size medium weight cold rolled mild steel

S&F 2nd class hard wood factory made plain framed panelled door shutters 35mm thick (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both sides. The size of rail and stiles as per IS:1003 (Part I), Klin seasoned and chemically pressure treated.

S & F mild steel bars conforming to Fe 290 Gde E-165 as in guard bars or similar works including welding etc complete all as specified.

M&L for preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed

M&L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified

M&L for preparation of plasterd wall new surfaces and applying two coats of oil bound distemper over one coat of wall care putty all as specified

M&L for preparation of newly plastered wall surfaces and applying two coats of cement base paint over one coat of primer all as specified

M&L for complete removal of existing treatment and applying two coats of cement based paint over one coat of primer all as specified and as directed

M&L for complete removal of existing treatment and applying two coat of oil bound distemper over 2mm thick wall care putty all as specified

S&F solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening all as per specifications and drawing shown on sl page No 150 of SSR part II (for item-884)

S&F in repair vitreous china wash down water closet pan (Pedestal pattern) coloured including fixing bolt and plastic water closet seat black closed pattern with flat bottom cover with MS chromium plated hinges devices to matching colour

S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & both side prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of both side prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading & jointed together with solvent cement, supply & fixing in the frame at site as per SSR specifications & diagram/product drawing shown on sl page NO 146 of SSR Part II with the size of door shutter as required & directed by the Engr-in-Charge.

M&L for taking up or down steel tubing of 15mm bore and connections, including cleaning for re- fixing or removal to store

M&L for taking up or down steel tubing of 20mm bore and connections, including cleaning for re- fixing or removal to store

S&F for GI pipes of 15mm bore, 'medium grade' , with all fitting and fixed complete to walls and ceilings or laid in floors as all directed.

S&F for GI pipes of 20mm bore, 'medium grade' , with all fitting and fixed complete to walls and ceilings or laid in floors as all directed.

S&F in repairs 15mm dia Bib taps cast copper alloy, with Chromiun plated crutch or butterfly handle screwed down,for iron pipe or brass ferule complete all as specified and directed.

S&F in repairs 15mm dia pillar taps, cast copper alloy with capstan heads chromium plated screwed down, high pressure with long screwed shanks and fly nuts, screwed for iron complete all as specified and directed.

S & F in repairs 15mm dia stop valves, Chromium plated crutch or butterfly handle screwed down high pressure, screwed both ends for iron pipes or for unions.

M&L cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as directed.

S&F in repair 10 litre capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia

S&F in repair tubular towel rail 20mm dia D type and 60cm long between flanges including brackets fancy type brass chromium plated

S&F in repair soap dish of 1mm thick stainless steel box type fixed with screws of size 150mmx150mmx100mm

S&F in repair vitreous china wash basin, white, flat back, size 550x400mm including waste pipe, brackets and cutting for and pinning in ends of brackets or erecting stand but excluding taps, chain and plug

S&F 150mm long Aluminium anodised, barrel tower bolts of extruded section and fixed

S&F300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S&F Extruded aluminium alloy handles, fabricated type, anodised of size 150mm.

S&F for Harrison rails, of anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc

Figured glass, 3mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane

S&F neoprene rubber beading/ packing complete all as dirtected.

S&F in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete

M&L 50mm thick PCC of type B-1, 1:2:4 (20mm graded stone aggregate) for padding

S&F in repair powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specifie

M&L for Screed bed or bedding layer of mortar 20 mm thick for laying floor finishes

S&F for Rotational moulded polyethylene water storage tank of 700 liter capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

M & L for machine cut kota stone slab size as in flooring, stair case landing. treads of steps etc, 20-25mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified including 15mm thick screed bed or bedding in cement mortar 1:6. all as specified and directed

Demolition of cement concrete unreinforced of Concrete of any description and in any position not otherwise specifically provided for where directed.

M&L for machine cut kota stone slab size as in skirting, dado, vertical surfaces etc., 20-25mm thick, laid and jointed with grey cement sluirry mixed with pigment to match the shade of the slab including rubbing and polishing including backing coat of 15mm thick in CM (1:3) complete all as specified

M&L for cement concrete (1:3:6), type C2 (using 40mm graded stone aggregate) 50mm thick as in plinth protection inclujding necessary form work and finishing surface even and fair without using extra cement including bitumen joints complete all as specified

Taking down carefully surface aluminium/copper point wiring with PVC casing-capping (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc and making good disturbed surfaces complete.

M&L for point wiring with 1100 volts grade PVC insulated FR multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.20 mm and white modular mounting cover plates with frame for mounting modular switches, sockets, fan regulators etc. complete for the following :-

One light point controlled by one switch.

One fan / exhaust point controlled by one switch.

One socket outlet 6 amp controlled by one switch on independent board.

One socket outlet 6 amp controlled by one switch on same board with other switches.

M&L for point wiring with 1100 volts grade PVC insulated FR multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings/fixing accessories and sunken galvanized pressed steel terminal boxes of thickness not less than 1.2mm covered with 3mm thick phenolic laminated white shite cover for one 16 amp socket outlet controlled by one switch on independent board.

S&F modular switch one way 6 amp 1 module all as per Legrand Mylinc, cat ref no. 675501 or equivalent in Schneider Zencelo or MK Blenz as approved

S&F modular switch one way 16 amp, 1 module all as per Legrand Mylinc cat ref no 675511 or equivalent in Schneider Zencelo or MK Blenze as approved.

S&F modular socket 6/16 – 2/3 pin combined 2 module all as per Legrand Mylinc cat ref no 675555 or equivalent in Schneider Zeneclo or MK Blenz as approved.

All as per Legrand Mylinc cat ref no. 675552 or equivalent in Schneider Zenclo or MK Blenz as approved.

S&F modular hum free electronic step fan regulator, 100 watt 2 module all as per Legrand cat ref no. 6755320 or equivalent in Schneider Zencelo or MK Blenze as approved

S & F ventilating fan single phase, 230 volts, mm sweep plastic boday with mounting rings all as per Havells cat ref no. Ventil Air-DX or equivalent in Almonard/ CG/Bajaj as approved.

S&F MCB distribution boardETPN, 415 volts, 4 ways, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required.

S&F MCB distribution board SPN 12 ways powder coated, CRA steel sheet constructed as per IS: 8623, degree of protection IP 43 – IK 09 with metal door, recess mounted, having insulated 100 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required. Make- Legrand cat ref no 607712 or equivalent in Hager or Scheider as approved.

S&F ceiling rose 6 map, 3 plates polycarbonate body complete. Make – Havells Reo / Anchor Penta PC / SSk as approved.

S & F LED watt street light made upto pressure dia cast housing with prismatic polycarbonate diffuser and individual LED s with secondary optics and IP 65 protection complete as specified and directed. Bajaj Cat ref No BCLST 20W LED Code 169829 or equivalent in Philips or wipro as approved.

S &F energy efficient recessed mounted LED luminaries suitable got 2' x 2' grid ceiling with falt diffuser and lument output of 5700 having constant current electronic driver duly connencet with 0.5 sqmm white PVC insulated and sheathed three core multistranded copper conductor cable as required . Make -Wipro Elate LED CRCO 10 Cat No CRC010R038HP57GL or equivalent in Philips of GE lighting as approved

S&F LED batten (1.2m) made of CRCA sheet housing with a PC glossy difusser duly prewired connection having a nominal system lumen output of 2000 lumes at a minimum system efficacy of 105 lumens per watt and total power consumption not more than 19 watt incl driver. It has a rated system life time of 40000 burning hours at L70 and should have a color temperature of 6500K, CRI>80, THD < 10% and PF > 0.95 complete. Make- Philips cat ref no. ENDURALED BATTEN “BN 108C led 20s PSU CDL WH” or equivalent in wipro or GE lighting as approved.

F & F LED fixture 10 watt including connection as per Wipro Trim LED NEO cat ref No LL20-111-XXX-65 -NE 6500 or equivalent in Philips or Havells as approved

S&F LED bulkhead fitting 9 watt IP 66 & IK 09 with pressure diecast aluminium housing & polycarbonate diffuser duly prewired for connection with flexible multi stranded copper conductor cable as required all as per Philips cat ref no. WT202W LED6S CW PSU S1 PC or equivalent in Wipro or Havells as approved.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded coper conductor cable (Phase –Red, Neutral – Black, Earth-Green) drawing into and incl concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x4 sqmm + 1x2.5 sqmm earth wire complete

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FR multistranded coper conductor cable (Phase –Red, Neutral – Black, Earth-Green) drawing into and incl concealed rigid non metallic PVC conduit 20 mm dia, medium grade, ISI marked ivory colour along with accessories of following nominal sizes 2x6 sqmm + 1x4 sqmm earth wire complete

S&F Power unit for AC or geysers 3.5 KW 4 module incl sunken modular GI metal boxes not less than 1.2mm thick and white modular mounting plates with frame all as per Legrand Mylinc cat ref no. 675558, 689009, 675564 & 675584 or equivalent in Schneider Zencelo or MK Blenze as approved.

M&L for pipe in pipe chemical earthing with GI pipe electrode 3.0 m long having outer pipe nominal dia 80 mm & inner pipe nominal dia 50 mm duly filled with highly conductive and anti corrosive compound of required quantity having chemical composition Bentonite 40%, copper sulphate 20%, Gypsom 5%, Graphite 10%, Alum 5%, Zinc sulphate 10%, Aluminium sulphate 10% burried in ground by digging a bore of 150 mm dia surrounded by soil friendly backfill compound non soluble in water including connection with galvanized earth wire 4 mm dia from pit to main MCB DB protected in 15 mm GI pipe light grade, making PCC pit of size 0.3 m x 0.3 m x 0.3 m (inner size) in mix 1:3:6 type C1 with RCC 1:2:4 type B-1, 40 mm thick cover reinforced with 8 mm dia MS bars 3 Nos both ways with lifting hook made out of 8 mm dia bar and testing on completion to achieve value not more than 1.0 ohm complete.

S & F MCCB foru pole, 125 amps, 16 KA . Thermally adjustable between 70 to 80% including 4 spreader link set of same make as that of MCCB for connection required lugs etc complete. Make legrand cat ref No 420016 or equivalent in Schneider or Hager as approved.

S&F S&F MCBs as per load requirement ‘A’series of breaking capacity 10 KA, ISI marked incl required wiring connection with copper lugs of suitable size provided in MCB DBs of following ratings:

a) Single pole 6 to 16 amp.

(b) Double pole 32 amp.

(c) Four pole 63 amp.

Taking down carefully aluminium submain wiring with PVC surface conduit and making good disturbed surfaces complete.

Taking down MCB distribution boards with incoming and outgoing controls any make, any capacity after disconnecting complete.

nirman construction

Shreeganesh Construction

VIJAY CONSTRUCTION CO

partechengineers