Water Suppy Scheme Chak Goran (Civil Works) under JJM ( Work No.01)

Amount

Construction of Boundary wall around the tube well station (Items Rate) Earth work in excavation by manual means in trenches for foundation , drains , pipes cables etc (not exceeding 1.5 mtr in width) and for shafts wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed in all kinds of soils.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering finishing and reinforcement with 1:2.4(1 cement: 2 Coarse sand : 4 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo -Mechanically Treated bars of grade Fe-500D or more

Centring and shuttering including strutting, propping etc and removal of form work for foundation, footings, base for columns .

Centring and shuttering including strutting, propping etc and removal of form for walls (any thickness) including attached pilasters buttresses, plinth and string course fillets, kerbs and steps etc.

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1:6 (1 cement: 6 coarse sand)

Extra for Brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Half brick masonry with common brunt clay ( non- modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 (1 cement 4 coarse sand) Parapit

Extra for Half Brick work masonry in superstructure above plinth level upto floor V level

15mm thick Cement plaster or rough side of single or half brick wall of mix : 1:4( 1 cement :4 coarse sand) wall with plinth

Finishing walls with water proofing cement paint of required shade on new work (two or more coats) applied @ 3.84 Kg/10 Sqm

Carriage of Sand by Mechanical Transport from source to site of work for an av. Distance of 15 km and 100 mtr by head load

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 15 km and 100 mtr by head load

Carriage of Bajri (above 40mm) by Mechanical Transport from source to site of work for an av. Distance of 15 km and 100 mtr head

Carriage of Brick from klin to site of work by Mechanical Transport from source to site of work for an av. Distance of 15 km and 100 mtr by head load

Carriage of cement by Mechanical Transpot for an avg. distance of 15 km ad 100 mtr by head load incl. cost of loading, unloading and stacking

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.(Angle Iron Gate)

Pipe Works: Laying and fitting of Rising main and Distribution system Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, including dressing of sides and ramming of bottoms lit upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kind of soil

Laying and fitting of GI pipes ( all classes) complete excluding the cost of pipes and earthwork

GI pipe 100mm dia ( trench size 0.75 x 0.75)

GI pipe 80mm dia (Medium) ( trench size 0.75 x 0.75)

GI pipe 80mm dia (Light) ( trench size 0.75 x 0.75)

GI pipe 65mm dia ( trench size 0.70 x 0.75)

GI pipe 50mm dia ( trench size 0.60 x 0.50)

GI pipe 40mm dia ( trench size 0.50 x 0.40)

GI pipe 32mm dia ( trench size 0.50 x 0.40)

GI pipe 25mm dia ( trench size 0.40 x 0.30)

GI pipe 20mm dia ( trench size 0.40 x 0.30)

GI pipe 15mm dia ( trench size 0.30 x 0.20)

Laying and fitting of HDPE pipe (all classes) with fittings complete

HDPE pipe 110 mm dia ( trench size 0.75 x 0.75)

HDPE pipe 90 mm dia ( trench size 0.70 x 0.75)

HDPE pipe 75 mm dia ( trench size 0.70 x 0.75)

HDPE pipe 63 mm dia ( trench size 0.60 x 0.60)

HDPE pipe 50 mm dia ( trench size 0.50 x 0.50)

Filling available excaved earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20cm in depth, lead upto 50 m and lift upto 1.5mtr.

Welding of joints by electric arc welding including testing and commissioning of joint incl. carriage of set and all other accessories including making arrangement for electric supply / arrangement for generator etc. complete

Providing and fixing 150 mm dia C. I. sluice valve/ Check valve as per specifications IS: 14846 for control purpose of different dias including joining material , bolts, nuts , washer, rubber insertions etc. ( heavy duty)

Providing and fixing 100 mm dia C. I. sluice valve/ Check valve as per specifications IS: 14846 for control purpose of different dias including joining material , bolts, nuts , washer, rubber insertions etc. ( heavy duty)

Providing and fixing 80 mm dia C. I. sluice valve/ Check valve as per specifications IS: 14846 for control purpose of different dias including joining material , bolts, nuts , washer, rubber insertions etc. ( heavy duty)

Providing and fixing 65 mm dia C. I. sluice valve/ Check valve as per specifications IS: 14846 for control purpose of different dias including joining material , bolts, nuts , washer, rubber insertions etc. ( heavy duty)

Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screw end) 50 mm dia ( heavy duty)

Providing and fixing gun metal gate valve with C.I wheel of approved quality (Screw end) 40 mm dia ( heavy duty)

Providing and fixing gun metal gate valve non-return valve of approved quality (Screw end) 80 mm dia ( heavy duty)

Demolishing cement concrete manually/ mechanically means including disposal of unserviceable material with in 50 mtr lead as per directions of Engineer-in- charhge 1:4:8 or leaner mix (i.e. equivalent design mix).

Taking out existing CC interlocking paver blocks from footpath/ central verge including removal of rubbish etc. staking of serviceable material within 50 mtr lead as per direction of Engineer-in-Charge.

Laying old cement concrete interlocking paver blocks of any design/ shape laid in required lane, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand , filling the joints with fine sand etc. alll complete as per the direction of Engineer-in- charge.

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 25mm to 40mm dia.

Making interconnection of Gi distribution branch with GI Main by providing and fixing tee, union incl. cutting and threading of pipe etc complete 50mm to 80mm dia.

Providing and fixing brass stop cock of approved quality 15 mm nominal bore

Providing and fixing brass ferrule with C.I. mouth cover including borring and tapping the main 15 mm nominal bore

Providing and laying non- pressure NP2 class ( light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 sand) including testing of joints etc. complete at crossing / spots wherever required DI pipe 300 mm

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 20mm nominal size)

Carriage of G.I. pipe from Procurement Store to stacking place avg. distance 60 km by Mechanical Transport

Carriage of G.I. pipe from stacking place to site of work at avg. distance 500 mtr. By head load

Carriage of HDPE pipe from Procurement Store to stacking place avg. distance 60 km by Mechanical Transport

Carriage of HDPE pipe from stacking place to site of work at avg. distance 500 mtr. By head load

Restoration of lanes damaged during execution of pipe works : Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level in 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Carriage of Sand from source to site of work for an av. Distance of 15 km by Mechanical Transport and 100 mtr by head load

Carriage of Bajri (below 40mm) by Mechanical Transport from source to site of work for an av. Distance of 15 km and 100 mtr by head load

Carriage of cement by Mechanical Transport 15 km and 100 mtr by head load incl. cost of loading, unloading and stacking

Providing, installation, operating and commissioning fully autommatic gravity feed chlorination plant based on microcontroller technology with automatic chemical infusion and proportionate dosing controller along with chemical detection system and variable pressure controller by incorporating the latest electronic digital technology including cost of providing chlorine dosing and other necessary materials for one year and operation , maintenance for a period of one year from the period of installation of inline chlorinator (Complete job) at tube well Chak Goran

Providing and installation of sign Boad with writing (8t x 10 ft) and writing and painting on walls with quotations, JJM logo , infrastructure details etc (150 sft)

ASHOK KUMAR SHARMA

SIDDHARTH MEHTA

JASVIR SINGH