Upgradation of 3 School for School of Excellence at various Location in MAHISAGAR district.

Demolition and disposal of unserviceable materials with all lead and

lift. (i) unreinforced concrete.

Demolition of Brick work and stone masnoary including stacking of

2 sericeable materials and disposal of unsericeable materials with all 37.24 562.89 Cmt.

lead and lift. (ii) in cement mortar

Dismentalling tiled or stone floors laid in mortar including stacking

3 of serviceable materials and disposal of unserviceable materials with 490.23 49.12 Smt

all lead and lift.

Dismentling Doors / windows, ventilators etc. (wood or steel) shutters

4 including chowkhats architraves, holdfasts and other attachments and 14.00 192.09 No

staking all with all laead and lift. (A) Not exceeding 3.0 Sq.mt. area

Removing dry or oil bound distemper by a washing and scraping and

5 sand papering the wall and ceilling surface smooth including 7282.33 11.53 Smt

necessary repairs to scratches complete.

Scraping oil paint from steel and other metal surface and making the

surface even (with Hand Scraping)

Dismentling sanitary fittings like wash basin, Indian WC pan,

7 Europian WC pan, flushing tank etc. including stacking the materials 15.00 414.23 No

with all lead and lift

Dismentaling of sheet roofing including ridges, hips, valleys, gutters

etc. stacking of serviceable materials and disposal of unserviceable

materials with all lead and lift.

(ii) GI Sheet Roofing

Excavation for foundation upto 1.5 m depth including sorting

out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

Filling with the available excavated earth (excluding rock) in

trenches, plinth, sides of foundation etc. in layers not exceeding 20cm

in depth consolidating each deposited layer by ramming and

11 of 20 cm. thickness inculding watering, ramming and consolidation 490.12 295.15 Cmt.

etc. complete.

Brick work using common burnt clay building bricks having crushing

12 strength not less than 35 kg./Sq.Cm. in foundationand plinth in 59.37 4978.22 Cmt.

Cement Mortar 1:6. (1‐ Cement : 6 ‐finesand)(C) Fly Ash Bricks

Brick work using common burnt clay building conventional bricks

having crushing strength not less than 35 Kg/Sq. cm. in foundation

and plinth in cement mortar 1:4 (1 Cement :4 fine sand) (C) Fly Ash

Bricks(For Earth Quack Zone )

Brick work using common burnt clay building bricks having crushing

strength not less than 35Kg./Sq.Cm. for superstructure in cement

mortar 1:6(1 cement :6 fine sand) including curing etc. complete. (C)

Fly Ash Bricks For all heights and all floor

Half brick in common brunt clay building bricks having crushing

strength not less than 35 Kg/sq.cm in cement mortar 1:4 (1 cement :

coarse sand) (C) Fly Ash Bricks in super structure including curing

etc. complete.For all floors

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse

sand :8 hand brocken stone aggregates of 40mm nominal size) in

plinth and curing complete including cost of formwork. (A)

Foundation and Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse

sand : 10- hand broken stone aggregates 40 mm nominal size) and

curing complete including cost of formwork in (A) Foundation and

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse

Sand : 4 graded stone aggregate 20 mm nominal size) & curing

complete including cost of form work (A) Foundation and Plinth -

Below Tie beam, Plinth protection & surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in

one layer and finished with a floating coat of neat cement. (A) 40mm

Description Of Item Quantity Rate Unit Amount

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Coping Vertical

and horizontal for all floor (Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and Excluding the cost of

reinforcement for reinforced concrete work in (A) Foundations,

footings, Base of columns and Mass concrete.(Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Lintels all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajja all floor

(Cement Level 360 Kg)

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts all floor (Cement Level 380 Kg)

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab all floor

(Cement Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark)

26 Confirmed to IS-1786 for R.C.C.work including Cutting, bending, 25478.80 77.29 Kg.

binding and placing in position etc. complete.For all floors

Providing 10mm thick cement plaster in single coat on on

brick/concrete walls & Ceilling & Soffit of stair interior plastering in

cement mortar 1:4(1 cement 4 sand) watering, curing etc.

complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair

side of single or half brick wall for interior plastering in cement

mortar 1:4(1 cement 4 sand) watering, curing etc. complete.For all

20mm thick sand faced cement plaster on walls above ground level

consisting of 12mm thick backing coat of cement mortar 1:3(1

cement 3 sand) and 8mm thick finishing coat of cement mortar 1:1(1

cement 1 sand) watering, curing etc.complete for any Height.

Finishing walls with 100% Premium acrylic emulsion paint having

VOC less than 50 gm/litre and UV resistance as per IS 15489:2004,

Alkali & fungal resistance, dirt resistance exterior paint of required

shade (Company Depot Tinted) with silicon additives. New work

(Two or more coats applied @ 1.43 litre/ 10sqm. Over and including

priming coat of exterior primer applied @ 0.90 litre/10 sqm, Item

Includes two coat of primar and putty with scafolding at all level of

work. As per Approval of Engineer Incharge.

Distempeing (Two coats) with oil bound washable distemper having

VOC content les than 50 grm/liter of approved brand and

manufacture and of required shade on wall surfaces to give an even

shade, over and including a priming coat and putty with alkali

resistance primer of approved brand after thoroughly brushing the

surface and other foreign matter and also including preparing the

surface even and sand parpered smooth As per Approval of Engineer

Painting two coates (Including Priming coat)having Low VOC

content over new steel and other metal surfaces with enamel

paint,primar coat, brushing, interior to give an even shade including

32 cleaning the surface of all dirt,oil, grease,dirt, dust and other foreign 1271.72 127.34 Smt

matter with fine steel wood, scrapers and sand paper with ready

mixed priming paint brushing red lead etc. complete.(As directed by

Engineer in charge)

Description Of Item Quantity Rate Unit Amount

Providing and laying 25mm thick polished Kota stone

flooring/staircase treads (two pieces with three groves in front of

33 steps) over 20mm (average) thcik base of cement mortar 1:6 (1 151.34 1019.39 Smt

cement 6 coarse sand) laid over and jointed with grey cement slurry

including curing, rubbing, and polishing etc. complete.

Providing & fixing average 25mm thick Double polished Kota stones

34 for shelves in cup board, seating plat form, including curing, rubbing, 17.18 807.34 Smt

polishing etc. complete. (As directed by Engineer in charge)

Providing & Fixing 25mm thick double polished vertical Kotah stone

35 for (partion)urinal as par drawing including round edge moulding etc 8.68 1350.32 Smt

comp. (As directed by Engineer in charge)

Providing and laying 18 mm thick mirror polished black granite

stone machine cut in single piece (Max. available) in sill and jambs

laid over 10 mm thick cemen mortar 1 : 3 (1 cement : 3 coarse sand)

36 and jointed with grey cement slurry with matching pigment incl. 26.03 2061.06 Smt

rubbing and polishing half rounding edge both side etc. complete

colour and shed as approved by architect engineer in charge. (As

directed by Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain & curve

surface 12mm to 20mm of broken piece of ceramic tiles or Glazed

tiles ( one or more colour as directed by Engg. In charge ) to be laid

over cement mortar bedding of CM 1:3 to plain or and slopes and to

37 be tempered to bring mortar cream up to and colour pigment 357.35 779.70 Smt

including rounding of junctions and extending them pu to 15cms

along the wall and curing with bends any patterns of designs as per

deawing or directions including cleaning with water and oxilic acid

using 1 kg / 1 bag of water proofing materials.

Providing cement vata (10 cm X 10 cm size) quartar round in cement

mortar 1:1 including neat cement finishing, watering etc. complete

Respectely plaster acitivity shall be commenced only after completion

of vata work.

Providing & fixing in position mild steel door with ventilation frame

40x40x6 mm and shutter frame 35x35x5mm ,75x5 mm ms flate at

lock rail,10 mm square bar in vent at10 cm c/c coverd with

39 corrugated ms sheet 0.6 mm thick, including applying a priming coat 20.87 3718.05 Smt

of read lead paint including cleanicn the surface of all dirt, dust and

other foreign matter (As directed by Engineer in charge& approved

drawing and design etc.)

Providing & fixing in position mild steel window with ventilation

frame 35x35x5 mm and shutter frame 25x25x5mm ,10 mm square

bar grill at10 cm c/c coverd with corrugated ms sheet 0.6 mm

thick,including applying a priming coat of read lead paint including

cleanicn the surface of all dirt, dust and other foreign matter (As

directed by Engineer in charge& approved drawing and design etc.)

Providing and fixing FRP frame size 100x50 mm and

28mm thick FRP depress panel shutter having extra

reinforcement on sides & edges in Gel coat finish. The core

of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done

41 in situ alongwith embedded wooden pieces for 8.46 2377.76 Smt

stiffening & also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather proof,

termite proof & resistance to mild acid/alkali. Rates are

to be inclusive of S.S hinges with necessary screws &

alluminium fixtures & fastenings & fastener sleeve.

Steel work, M.S Grill, welded in built up sections framed work

including cutting, hoisting, fixing in position and applying a priming

coat of read lead paint. (A)In beams and joists, channels angles Tees,

flats, with connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to common rafters and

Providing & fixing G.I rain water Spout of 65mm dia and 60cm

Painting of logo on front side wall as directed by Engineer in charge

and as per approved drawing.

Description Of Item Quantity Rate Unit Amount

Providing and laying white glazed tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement.

Providing & Fixing Green board(2400mm x 1200mm) with soft

46 board(1200mm x 1200mm) on wall as per the drawing & design etc. 15.00 10352.50 NO

Providing upto floor two level precast cement concrete jali or grill

1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate

47 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire 6.20 855.66 Smt

including roughening,cleaning, fixing and finishing in cement mortar

1:3 and curing complete.(E) 100mm thick

Providing and fixing pre-cast Rubber Dye / steel Dye inter

locking concrete block 60mm thick with grade of concrete

M300 pnumatic compressed / vibrated mechanically and as

per approved design Confirming to IS 15658 : 2006 including

mm Sand layer for levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Re-fixing of existing paver Blocks:

Fixing of existing pre-cast Rubber Dye inter locking concrete block

as per approved design including 35mm Sand layer for levelling and

filling the joint with sand in proper line and level etc complete.

Providing and fixing pre-cast concrete kerb stone of gray cement

based concrete block 30 cm length, 30cm height and 15cm thick of

50 M250 grade concrete as per aprooved design and including 120.00 374.92 Rmt

excavation for fixing in proper line and level, filling the joint with

C:M 1:3 (1 Cement : 3 Fine sand) etc. complete (uptp 10 ton).

Providing and fixing 1.20 Metre high fencing with 2.0 Metre long

M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats

fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of

51 galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, 597.00 391.93 Rmt

strained and fixed to posts with G.I,staples including fixing the

postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc

Providing and fixing of highly durable precoated Roofing Sheets

having high quality color coating throughout the roof and having

minimum 0.6 mm thickness .The Color Coated sheet Roofing

52 fixed with galvanized iron /color powder coated J or L Hooks, Bolts 56.00 1098.53 Smt

and nuts 8mm diameter with bitumen and G.I. limpet washer or color

powder coated limpet washer. filled with white lead complete as per

approved sample and color as directed by engineer in charge

Provoding and supplying small dust bin (Green,Blue,Red,Black

53 yellow,) 7 Litres as directed by Engineer in charge, Approve Make- 32.00 290.38 NO

Cello, Aristo, Nayasa

Provoding and supplying big dust bin (Green,Blue,Red,Yellow)

54 Litres as directed by Engineer in charge Approve Make- Cello, 16.00 464.60 NO

Aristo, Nayasa

Provoding and supplying big dust bin ( Green,Blue,Red) 50 Litres as

directed by Engineer in charge Approve Make- Cello, Aristo, Nayasa

Providing and Fixing 5mm thick Acrylic Name Plate for dark zink

glare with braille lippi and fixing with double sided bonding tap and

screws as per direction of Engineer in charge of Size having 12'. X 4 '

etc. compl.

Providing and Fixing 5mm thick Acrylic Name Plate for dark zink

glare with braille lippi and fixing with double sided bonding tap and

screws as per direction of Engineer in charge of Size having 12" X

18" etc. compl.

Providing and laying tactile tile (for vision impaired persons as per

standards) of size 300x300x15 mm having with water absorption less

than 0.5% and conforming to IS:15622 of approved make in all

colours and shades in for outdoor floors such as footpath, court yard,

multi modals location etc., laid on 20mm thick base of cement mortar

1:4 (1 cement : 4 coarse sand) in all shapes & patterns including

grouting the joints with white cement mixed with matching pigments

etc. complete as per direction of Engineer-in-Charge.

Description Of Item Quantity Rate Unit Amount

Supplying submersible pump set for bore of 150 mm. dia. or more

having Single phase motor capacity not more than 1.5 H.P discharge

capacity having (a) (20 Stage) head 110 mtrs. suitable for 32 mm dia.

delivery pipe. Cat.II

Providing and fixing School of Excellence Logo Size ( 900mm x

900mm ),Aluminium Composite Panels (ACP) 3mm thickness,Coloe

Code - PS 33 Blue,High Glossy 3mm Orange Acrylic Embossing

60 Logo,Back Side Aluminium Section Framing ( 50mm x 25mm x 3.00 8208.61 NO

1mm )25mm is Side Of Frame and SS Hardware Finish on front side

of ACR wall as directed by Engineer in charge and as per approved

Providing and fixing Red Agra stone takti 0f size 600*600*12 to

mm having with approved SOE LOGO Letter and in ivory colour

with water based sealent coating finishing on wall in cement mortar

1:3 (1 cement : 3 coarse sand) in all shapes & patterns including

grouting the joints with white cement mixed with matching pigments

etc. complete as per direction of Engineer-in-Charge.

Painting two coats (including priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

Construction of a soak well of as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

63 5.50 5944.86 Per Cmt

incharge.( The internal In-to-in dimension shall be considered for

calculation)

Construction of a septic tank as per the approved drawing & design

etc.in all sort of soil complete as directed and approved by engineer

64 5.50 5553.92 Per Cmt

incharge. ( The internal In-to-in dimension shall be considered for

calculation)

RCC GSR ( description of item for turnkey tender)

Preparing structural design of RCC Under Ground / Partially under

ground / above high ground level Reservoir of required capacity as

per relevant I.S.s and constructing the same, including excavation in

all types of soil strata (including rock) including shoring strutting if

required, for loose soil / to protect from collapse due to near by traffic

load, casting 100 mm thick P.C.C. leveling course in M-10, Refilling

the pit with proper soil and disposing of the surplus stuff within a

lead of 50 meters. Including cement plaster in CM 1:2 with approved

water proofing compound to inside water touching surface to

container. Including all types of labour and material charges of

lowering, laying, erecting / hosting and jointing of pipe assembly to

inlet, outlet overflow, washout and bye pass arrangement as per

hydraulic design. Providing and fixing accessories like MS / GI

Ladder, CI Manhole frame and cover, water level indicator, adequate

cowl type ventilators or lantern type ventilator with stainless steel jail.

65 20000.00 6.32 liter

B.B. Masonry chambers for valves. Providing and applying three

coats of cement paint / snowcem to the out side face of structure. It

also includes satisfactory water tightness test as per relevant I.S. code

and painting name of scheme and capacity on the tank as per

direction of engineer in charge. List of Indian Standards for Design of

GSR / SUMP:-The structural design of GSR shall be in accordance

with provisions relevant I.Ss. (1) I.S. 3370 part I & II 2009 or latest

revised (1.1) I.S. 3370 part III & IV 1965 or latest revised (2) I.S.

– 2000 or latest revised. (3) I.S. 1893 – 2000 – 1984 or latest revised.

(4) I.S. 875, Part – 1 to 3, 1987 or latest revised. General

Specifications:-(1) Water depth in container shall be adopted as per

data of tender. If water depth is not specified the suitable water depth

/ acceptable to field engineer in accordance with hydraulic

requirement shall be adopted for capacity. (2) Shape of container (in

plan) specified by in data shall be adopted in absence circular shape

shall be adopted. (3) Size shall be fixed as per availability of space

Providing & fixing Stainless steel 316 Grab Bar 40mm dia.75Cm

long rail.as directed and approved by engineer incharge.

Construction of ICN Chamber as peras directed and approved by

engineer incharge.

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (i) 15mm dia.

Providing and fixing screw down bib taps of following size.(B) Brass

chromium plated screws down Bib Tap. (ii) 20mm dia.

Description Of Item Quantity Rate Unit Amount

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg.) (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455mmx 610mm

and 450mm deep for single pipe line.

Providing & fixing urinal of Approved quality including connecting

the urinal with waste pipe, trap etc. complete (A) White

71 earthenware flat back or corner type (including Angle cock,Waste 13.00 1836.03 NO

coupling,connection pipe & waste pipe) as approved by engineer

Providing and fixing wash down water closet (European

type W.C pan) with integral P or S trap including jointing the

trap with soil pipe in cement mortar 1:1 (1 cement : 1 fine sand) (seat

cover,Jet spray & Flush Tank to be measured Including) (A)

Vitreous China (I) Long pattern white as directed and approved by

engineer incharge.

Providing and fixing water closet squatting pan (Indian type W.C

pan) size 580 mm (earthwork, bed concrte, foot rests,Flush Cock

and trap to be measured and including paid) (A) Vitreous China (I)

Long pattern white as directed and approved by engineer incharge.

Providing erecting and fixing double coated ISI water tank of

74 required capacity each with all necessary fittings and connection etc. 3600.00 3.95 liter

complete on terrace

75 Providing & fixing UPVC ball valve(A) 25mm dia. 12.00 650.84 NO

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight C.I. cover with

frame of 300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 75 mm diameter with jali of the following

77 nominal diameter of self cleansing design with C.I scread 13.00 574.58 NO

down or hinged grating including the cost of cutting and

making good the walls.

78 Providing & fixing 110mm dia PVC cowl vent to pipes. 1.00 19.70 NO

79 Providing & fixing 75mm dia PVC cowl vent to pipes. 1.00 30.81 NO

Providing laying and jointing in true line and level

40mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

25mm dia.U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level

15mm dia.U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe

and joints and fixing the same with adhesive

solvent, including cost of all materials.

Description Of Item Quantity Rate Unit Amount

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 160 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

pressure PVC pipes of the following out side dia. Special density

complete with special flange compression type fitting,wall clips etc.

including making good the wall ceiling and floor.(G) 110 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working

PVC pipes of the following out side dia. Special density complete

with special flange compression type fitting,wall clips etc. including

making good the wall ceiling and floor.(F) 75 mm dia

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3

86 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed 36.00 1177.56 Smt.

with pigment to match the shade of slab including rubbing and

polishing etc. complete.

87 Providing compose pit as per design and drawing. 3.00 24138.21 Each

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

flooring treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush

pointing in white cement complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

complete for antiskit

Providing laying and boring recharge well with the outer dimention

of 2.46 X 2.46 Mt along with the Slit chamber having outer

dimension of 1.46 X 1.46 Mt. The Slit chamber shall be as per the

approved drawing with PCC & Masonary work. The recharge well

shall be drilled up to 30Mt in all sorts of strata along with minimum

90 12 mt Strainer pipe of suitabel size, graval / aggregate packing, PCC, 3.00 71879.59 No

BBCC , Midium size gravel, Course sand, nyloin mesh, and

neccesarry tools tackels and quipment for sucessfully functioning.

The item shall be as per the IS 15797:2008 , approved drawing and

Approved by Engineer incharge.

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

91 accessories and earth continuity of following type, erected on PVC / 7.00 350.47 Pt.

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.(e) in existing pipe erected flushed on

wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

92 PVC / Metallic/Wooden box covered with appropriate front plate 10.00 364.61 Pt.

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[I] For 6A Plug and 6 a switch with 2-

1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board(e) in

existing pipe erected flushed on wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected complete with Modular type switch & 5 pin Plug erected on

93 PVC / Metallic/Wooden box covered with appropriate front plate 4.00 499.95 Pt.

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.[II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board.(e) in existing pipe

erected flushed on wall/ceiling complete,Cat. III

Description Of Item Quantity Rate Unit Amount

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

94 mounting base frame covered with textured / metallic/white front 9.00 241.39 Pt.

plate modules erected on / in wall / ceiling with following type

accessoriesCat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires erected in

below type of pipe with 6A Modular type switches and following

95 type of accessories erected on PVC / Metallic/Wooden box, single 2.00 449.45 Pt.

mounting base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe erected. with

necessary batten/angle holder or ceiling rose or H.D.Connector as

directed.(e) in existing pipe erected flushed on wall/ceiling complete

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In

charge.(10) 6/16Amp. Universal socket

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In

charge.(7) Blank Plate Single,Cat.III

Providing following type of Modular Type Accessories mounted with

PVC / metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate , modules erected with

necessary connections as per site situation directed by Engineer In

charge.(8) Computer RJ-45 socket ,Cat.III

Providing and erecting ISI mark embossed Medium class RIGID

PVC PIPES (F.R.L.S.)of following size complete to be erected on/in

wall or ceiling erected with necessary PVC fittings & Junction boxes

fixed with adhesive solution & Clamps with following dia of pipes,

in approved manner as directed (a) 20 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size,(E) in existing

pipe,(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling, with

1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size,(E) in existing

pipe,(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green colour

for earth continuity of following size,(E) in existing pipe,(a) 2 wire

Providing & erecting Switch board for Computer or electric

apparatus consisting of following modular type accessories mounted

with PVC / Metallic concealed/open box with single mounting base

frame covered with textured/metallic /white front plate,modules

erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug ,For Modular Type Accessories ,Cat. III

Description Of Item Quantity Rate Unit Amount

Supplying and erecting LED indoor fittings with LEDs of wattage

0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing

used as a heat sink shall be made of thick sheet Steel conforming to

IS: 513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

104 Luminaire efficacy> 85 lumens/watt ,LED 5.00 295.93 No.

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

between the ranges shown.),(A) Tube Light with integral driver,(ii)

20 Watts, Surge - 2KV,IP-20, conventional 4 feet,Cat-lll

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 burning hours life, 500 V in

built-surge protection,Polycarbonate diffuser, mounting suitable for

105 E14 / E27 / B22 lamp holders, pf >= 0.5(A) LED Lamps integral 2.00 112.11 No.

type, with PC diffuser suitable LAMP holder,(ii) 8 watts ,Cat-III

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark , Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity ,(A)

6 to 32 Amp. Cat.III

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 &

without MCB to house appropriate nos. of MCBs.(The DBs should

be used of same company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing (b) sheet steel

double door,(ii)12 way (IP-43)

Providing , erecting , fabricating the M.S. structure as per requirement

on site incorporating proper size of M.S. angles,square,round, flats,

bars, channels, sections complete with cutting, welding, grinding &

109 finishing duly painted with one coat of red oxide with erection on 150.00 77.77 Kg.

site as per direction of engineer in charge with necessary grouting,

cementing, plastering & finishing complete.

Total Rs. :

I/We am/are willing to carry out the work at………………….% above/below percent

(Should be written in figures and words) of the estimated rate mentioned above.

Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct……………………… % below Deduct……………………… % Above

In words In words