latter No 6659-66 dated 26.09.2026

Providing and applying tack coat with Bitumen emulsion (RS-1) of HPCL/BPCL using emulsion distributor at the rate of 0.275 kg (Zero Point two seven five killogram) per Square metre on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.complete including haulage/ carriage materials, labour and equipments to various location through all modes of transportation within all leads, lifts and as per direction of Engineer-in-charge. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST.

Providing and laying 30mm (Thirty millimetres) compacted thickness Bituminous concrete with bitumen of grade VG-10(Viscosity Grade-ten of M/S Indian Oil Corporation Ltd.M/S Total Oil India Pvt. Ltd @ 5.5% (five point five percent) (percentage by weight of total mix) and cement filler @ 3% (three percent) (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH producing on average output 75 tonne per hour using crushed stone aggregates of specified grading. premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required, grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete including entire carriage of material with in all leads lifts and technical specifications MORTH 2013 Clause 509 complete as per the direction by the Engineer-in-Charge and other incidentals. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST

Providing and laying of hot applied thermoplastic compound 2.5mm(Two point five millimetre ) thick including reflectorising glass beads @ 250 gms (Two hundred fifty grams ) per square metre area thickness of 2.5 mm(Two point five millimetre ) is exclusive of surface applied glass beads as per IRC:35. The finished surface to be leveled uniform and free from streaks and holes. with in all leads lifts and technical specifications MORTH 2013 Clause 509 complete as per the direction by the Engineer-in-Charge and other incidentals. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer roughvibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 80 mm Thick (Eighty Millimetre thick) cement concrete paver block of M-35 grade with approved colour with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications clause 802, 803,1202 and 1203 PCC 1:2:4 (one cement two sand and four stone aggregate 20mm nominal sizes) with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rate is including octroi, Royality, Malkana, Toll Tax, or any other Taxes imposed by the Government excluding GST