Construction of Ayurvedic Health Centre Building at Sarsowa Tehsil Palampur, Distt. Kangra (HP

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm ), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.with in all leads by any mode of trasportation and other incidental ,as per direction and entire satisfation of Engineer -in -charge The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal fifteen milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors all level and walls up to any width.Under 20 cm wide The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying cement concrete 1:6:12 (one cement : Six Sand : Twelve graded broken/crushed stone aggregate 40mm (forty millimeter) nominal size) mechanically mixed and curing complete, exluding cost of form work in foundation and plinth, as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Vertical and horizontal fins individually or forming box louvers band, facias and eaves boards including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying Mechanically mixed / vibrating Plain cement concrete work 1:1.5:3 (one cement : one and point five sand :three graded stone aggregate 20mm twenty millimeter nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in : Wall (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level upto floor two level :

Providing and laying Mechanically mixed / vibrating Plain cement concrete work in wallsin beams suspended floor roofs having slope 15 Degree landing ,balconies shelves chajas ,lintels ,bands ,plain window sills stair cases spiral stair cases above plinth level upto floor five level , excluding the cost of centring ,shuttreing finishing The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing for steel of sail Tisco Reinforcement for reinforced cement concrete work including , Strengthening ,cutting ,bending ,binding and placing in position complete and binding all complete above Plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying damp proof course 40 mm (forty milimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four aggregate) graded crushed stone aggregate 12.5mm (tewelve decimal five milimeter) nominal size mechanically mixed and curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Coursed rubble masonry ( First Sort) with hard stone in foundation and plinth with Cement mortar 1:5 ( One Cement : Five coarse sand). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and Applying coat of Residual petroleum bitumen of grade VG-10 of approved quality using 1.7 kg sqm on Damp proof course after cleannig the surface with brushes and finally with a piece of cloth ligtly soaked with kerosene oil The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Random rubble masonry/Polygonal rubble masonary ( uncoused / brought to courses ) with hard stone of approved quality in foundation and plinth including leveling up and cement 1:6:12 ( one cement :six sand :twelve grade stone agg 20 ( twenty millimeter )mm nominal size ) upto plinth level with C.M. 1:6 (one cement ; six sand ) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Coursed rubble masonry( first sort ) with hard stone of approved quality in foundation and plinth with cement mortor 1:6 ( one cement ; six sand ) upto plinth level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing M.S. Channels for doors, window, frame manufactured from M.S. Section 75x40x4mm (seventy five by fourty by four milimeter) with M.S. Flat 75x4mm (seventy five by four milimeter) in combination as per drawing and design including hinges jamb including iron butt hinges 2.5mm (two point five milimeter) thick with a provision of locking arrangement and sock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as per PWD specification, drawing and design. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing angle iron frames of doors ,windows and ventilators of mild steel angle sections of sixe 35 x35 x5 mm ,joints miterd and welded by angle iron 35x35x5 mm or 35x5 mm flat piecs to existing T iron frame or to wall dash fastener ,including fixing of neccessary butt hinges and screws and applying a priming coat of approved steel primer The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 three ply veneering with vertical grains or cross bands both faces of shutters:35 mm thick including ISI marked StainlessSteel butt hinges with necessary screws The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 35 mm thick shutters wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing factory made 30 mm thick door shutter made of Rajshiri solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrallyextruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mmx 1 mm, painted with primer , all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rail of size 100 mm x 30 mm with wall thickness 5 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge.Decorative finish (both side wood grained finish) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden/PVC plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including fixed steel window . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint Top hung window The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing Factory made double steel shutter side hungs (onle glazed and one wide glazed ) of standard rolled steel sections ,jointing mitered and welded with manufacture with relabte ISI standard specifications with steel plugs and screws or rowl plugs scerws or with fixing clips are with bolts and nuts as required iron fitting including providing and fixing glass panes with special putty glazed side of shutters or wire gauge of ISI desigantion 85 G with metal weding eithier side incuding priming coat of red lead paint The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required shade and colour with screws etcetra complete 250x10mm (Two hundred fifty into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required shade and colour with screws etcetra complete 100x10mm (Two hundred fifty into ten milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum handle anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required shade or colour with necessary screws etcetera complete.125mm (one hundred twenty five milimeter) size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing anodized aluminum handle anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required shade or colour with necessary screws etcetera complete.100mm (one hundred milimeter) nominal size. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete :150 mm( one fifty millimeter) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete 200 mm ( two hundred millimeter )weighing not less than 120 gms ( one twenty grams ) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 100mm (hundred milimeter) oxidized MS (mild steel )Handles confirming ISI :4992 with neccessary screws as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing & fixing complete box of cupborad shall be made of 25mm( twenty five millimeter ) thich of water proof termite resistance of commercial borad of Uniply/ Green ply/ Century ply/kit ply /duraply ( ISI Marked ) back side of cupborad shall have 6/8 mm ( six /eight millimeter ) thick water proof ply ( as per detail ) ,the shutter from all side also have 6mm thich hard wood liping all around we finished both side with 1mm thick laminated of Centuray ply /Green ply /action Tesa all cut portion of round shall have 6mm (six millimeter) thick hard wood edgeing includin liping cabnit rack /magnetic catcher ,handle and neccessary fitting complete in all respect The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing special quality bright finished brass cupboard or ward robe locks of ISI mark of Godraj /Link with four levers of approved quality including necessary screws etc. complete 65 mm (sixty five millimeter ) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 600 x 600 mm The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying Vitrified tiles of Kajaria /Johnson /bell/somany etc in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mm The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of Kajaria /Johnson /bell/somany etc of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing 1st quality ceramic glazed floor tiles of Kajaria /Johnson /bell/somany etc conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complet The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) 25mm thick. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Brick on edge flooring with bricks of class designation per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with :Makrana white/ Green second quality. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Stone filling / Brick aggregate under soak pit including entire carriage of materil. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of finolex /selience conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face unplasticised - PVC moulded fittings of finolex /vectus/prinece/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Bend 87.5° , 110mm bend. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing on wall face unplasticised - PVC moulded fittings of finolex /vectus/realince/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5° 110 mm Shoe. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

20 mm cement plaster (in coarse sand) of mix : 1:6 (one cement: sixcoarse sand) brick/stone masonry for interior plastering upto floor two level including ,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm ingirth and finished even and smooth. Cement Mortar (one Cement :six sand) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.C.M 1:6 (one cement: sixcoarse sand)

20 mm cement plaster (in Fine sand) of mix : 1:6 (one cement: sixcoarse sand) brick/stone masonry for interior plastering upto floor two level including ,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm ingirth and finished even and smooth. Cement Mortar (one Cement :six sand) The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.C.M 1:6 (one cement: sixcoarse sand)

6mm (six millimeter) cement plaster 1:3 (one cement isto three sand) in ceiling complete including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

15 mm cement plaster on rough side of single or half brick wall of mix 1:4 (1 cement: 4 coarse sand). The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture including carriage of material within all leads and lifts and other incidental as per approved specification, drawing, design and as directed by Engineer-in-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete as per PWD specification, drawing and design including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Finishing with Two or more coat on wall of Deluxe/Burger /Nerolac/ Multi surface paint system for interiors and exteriors using Primer @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm to give an even shade i/c cleanning surface of all dust and dirt and other foregin material The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Distempering with oil bound washable distemper of two or more coat of Deluxe/Burger /Nerolac/ and manufacture to give an even shade New work over and including water thinnable priming coat with cement primer and throughly brushing the surface free from matter drops dust lose mechanism and other foreign matter The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and Fixing Uni Stone cladding on Plastered surface side as on faces of Arch masonry walls etcetra on 12mm ( Twelve millimetre) thick cement plaster 1:3 ( One Cement : Three Sand ) and jointed with cement slurry including scaffolding etcetra complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing railing for stair case having blauster 40 x40 mmsquare hollow MS pipe SWG -16 Gauge with a clear height 85 cm @ 60 cm center to center jointed in cement concrete steps and jointing with electric / gas welding at top along with hand rail of hollow MS pipe of 50 mm dia ( SWG-18 ) Vertical blustar welded / jointed with each other with 2 no. MS flat of 50 x 5 mm complete with applying priming coat red lead paint as per specifications and dirction of enginner in charge

Providing plinth protection 60mm (Sixty millimetre) thick Interlocking paver / CC paver block with 23 cm dia half round stone ware pipe for drainage purpose fixed on 1:5 : 10 for bedding of pipe. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or / and residual bitumen applied hot at 1.45 Kg. per Sq. m of area for each course second course of roofing felt type 3 grade 1 ( hessian base self finished bitumen felt) and fourth and final course of stone grit 6mm and down size or pea sized gravel spread at 6 cum.dom or 0.006 cum. ) per Sqm. including preparation The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Excavation in Hilly Area in all heights and depths and in all kinds of soil by manual/ mechanical means including saturated soil comprising of ordinary soil, soft Rock,Hard rock, chisseling/wedging out of rock (where blasting is prohibited ) and their intermidiate classification of soil setting out true to the required line, grades cutting and trimming of side slopes to level as shown in the drawings and as directed by the Engineer in charge at site according to the MORD technical specification clause 302,1603.1 and 1603.2 The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and laying 1:5:10 (1 cement : 5 coarse sand) : 10 graded stone aggregate 40 mm nominal size) cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Back filling behind abutment, wing wall and return wall complete as per drawing & technical specificaion clause 1204.3.8. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing weel holes in brick masonry/ stone masonry, plain/ reinforced concrete abutment, wing wall, return wall with 100mm dia PVC pipe extending through the full width of the structures with slope of 1 (V): 20 (H) towards drawing face complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate inclusive royality malkana, toll texes, GST and other taxes imposed by the Govt.

Providing and fixing vitreous china water closet squatting pan (Indian Type W.C. Pan) of Cera /Jaguar / Hindware with 100mm (hundred millimeter ) sand cost iron P or S Trap ,10 litter Dual PVC flushing cisten of commander/hindware /cera i/c flush pipe with manually controller device ( handle lever ) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the wall and floor where ever required white viterous china orrisa pan of size 580 X 440 mm with intergul type foot rest The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing white vitreous china Pedistral type of hindware /cera /jaguar water closet (Europen type ) W C pan with seat and lead , 10 litter low level dual PVC flushing cistern of commander /hindware /cera /inncluding flush pipe with manually controlled device ( handle levers ) conforming to ISI 7231 with all filling and fixer camp including cutting and making good the wall floors where ever required W. C pan with solid plastic cover.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing viterous china wash basin of Hindware /cera /jaguar with C.I. brackets, 15 mm C.P. brass pillar taps,hindware /cera /jaguar/Ess/ Jal/ 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing white vitreous china pedestal for wash basin of Hindware /cera /jaguar /completely recessed at the back for the reception of pipes and fittings.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm dia The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 100 mm dia CP iron grating of ESS/jal /cera for nalhni trap The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 600x450 mm beveled edge mirror superior glass(of atul /modi gaurd /golden fish ) complete with 6 mm thick hard board ground fixed to wooden/ PVC cleats with C.P. brass screws and washers complete The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PTMT towel railof Pranmay complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providng and fixing Chromium plated brass soap dish of kingsten /jall /ess/ or contra with capstan head with CP brass bracket fixed to wooden cleats with CP brass screws The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing brass bib cock of approved quality :15 mm nominal boreThe rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing brass stop cock of approved quality :15 mm nominal bore The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing uplasticised PVC connection pipe with brass unions 450 mm length :15 mm nominal bore The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank,of sintex IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing Polyethelene-Aluminium?Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc 1216 (16 mm OD) pipe The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing G.I. pipes complete with G.I.pipe of tata /jindal / fittings including trenching and refilling etc 20 mm dia nominal bore The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing G.I. pipes of tata/ hinware /complete with G.I. fittings including trenching and refilling etc 15 mm dia nominal bore The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and laying cement concrete 1:4:8 ( one sand : 4 cement : eight crushed stone ) 40 mm nominal size in PVC pipes of the 150mm internal diameters i/c concrete of bedding necessary form work curing complete The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing high pressure PVC spigot and socket soil ,waste and ventilating pipes of finolex /selience/ supreme / ISI marked i/c fixing with approved adhesive etc complete 75 mm The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing high pressure PVC spigot and socket soil ,waste and ventilating pipes of finolex /selience/ supreme ISI marked i/c fixing with approved adhesive etc complete 110 mm The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing high pressure PVC spigot and socket soil ,waste and ventilating pipes ISI marked i/c of finolex /selience/ supreme/ fixing with approved adhesive etc complete 150 mm The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC single equal branch with oval asses ISI marked insertion rubber washer 3mm thick bolt and nuts complete i/c fixing with approved adhesive 75 mm The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC single equal branch with oval asses ISI marked insertion rubber washer 3mm thick bolt and nuts complete i/c fixing with approved adhesive 110 mm The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing PVC floor tarp of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor etc complete The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(nonmodular) bricks of class designation 7.5 The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Providing and fixing 455x610mm ( Four hundred fifty five into six hundred ten milimetre) light duty rectangular C.I. manhole with frame cover weight 38kg. ( Thirty eight kilograms) . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate also including octroi, royality, GST, toll tax, Sale Tax or other taxes imposed by the government.

Boby Singh