Kgm Blk276/25 Kavalayil vanitha Facility Center in Kuruvattur GP

Amount

Building work

50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD490696/2024-2025:Providing and fixing precoated galvanized iron profile sheets (size shape pitch of corrugation as approved by engineer in charge 0.35mm(+0.05%) total coated thickness with zinc coating 120 gms per sqm as per IS -277 in 240 mpa steel grade 5-7 microns epoxy primer on both sides of the sheet and polyster top coat 15-18 microns .sheet should have protective gurard film of 25 microns miniumn to avoid sscratches during transportation and should be supplied in single length upto avoid scraches during transportation and should be supplied in single length upto 12 m or as desired by engineer in charge.the sheet shall be fixed using self drilling self tapping screws of size (5.50*55 mm) with EPDM seat complete upto any pitch inhorizontal/ verticalor curved surface excluding the cost of purlins rafters truss and including cutting to size and shape where ever requierd . Details of cost for 216.14 sqm area of roof = 20.20*10.70 m +216.14 sqm sheet used + 20 nos *10.70 m *1.06 mm +226.84 m2 add 3% wastage +6.81 Total +233.65 m2

OD494697/2024-2025:Supplaying and fixing half split PVC gutter 160mm size. with MS flats 25mmx5mm size @60cm c/c fixing on Roof members (purlins or rafter), bolts, nuts and washers etc..including making necessary connections with rain water pipes complete. (pvc gutter or pathi).

13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

RITHU M.V (BID ID -2172742)

Bidder Name

RITHU M.V

VINEESH E