Enquiry No I-12631/WEB/CONT/BT

Amount

PROVIDING AND LAYING FOUR COURSES WATER PROFFING TREATMENT WITH BITUMEN FELT OVER ROOFS CONSISTING OF FIRST AND THIRD COURSES OF BLOWN OR/AND RESIDUAL BITUMEN APPLIED HOT AT 1.45 KG PER SQUARE METRE OF AREA FOR EACH COURSE, SECOND COURSE OF

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

15 mm cement plaster on the rough side of single or half brick wall of mix :1:4 (1 cement: 4 fine sand)

6 mm cement plaster of mix :1:3 (1 cement: 3 fine sand)

REMENING GLASS PANES, WITH PUTTY AND NAILS WHEREVER NECESSARY: GLASS PANES WEIGHTING 7.5 KG/SQM

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar

DISMANTLING DOORS WINDOWS AND CLERSTORY WINDOWS (STEEL OR WOOD) SHRTTER INCLUDING CHOWKHATS, ARCHITRAVE, HOLDFASTS ETC. COMPLETE AND DEPOSITING THE SAME IN CENTRAL/SITE STORES. OF AREA 3 SQ.M AND BELOW

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)

Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering,shuttering, finish & reinforce - All work up to plinth level:1:1.5:3(1cem:1.5 cor sand:3 graded stone agg 20 mm nominal size)

Chipping & Removing plaster from old wall or floor surface at all heights and places, scraping and clean the surface and disposing off the debris within lead of 2 K.M.

Providing and fixing ISI marked steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitred and welded with 15x3mm lugs, 10cm long embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement: 3 coarse s

Excavation in foundation tranches in all kinds of soils including soil mixed gravel, slag, boulders etc. up to a depth of 2 M include watering wherever required back filling the trenches with good quality soil in 150mm layers, watering and

Dismantling brick, stone or lean concrete, masonry, floor etc. and disposing the debris within a lead of 2 KM including all loading and transporting. Item also include cutting openings etc. in existing structures in all size required.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved s

Distempering with 1st quality acrylic washable distemper (ready made) of approved manufacturer and of required shade and colour complete. as per manufacturer's specification.One or more coats on old work.

supply and fixing of the GI sheet coated with epoxy paint and sealed with sealant over the coorridor area for protection from rain water and provide shade.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)

PURNIMA ENGINEERING AND CONSTRUCTION COMPANY

GARG ENGINEERING AND CONSTRUCTION PRIVATE LIMITED

M/S. P.B ENTERPRISES

KEW CONSTRUCTION PVT LTD

M/S RITESH ENTERPRISES

JUGAL AND CO