19/2023-24(EDCR) Increasing load capacity of overloaded Transformer, replacement of VCB, Jarjar wire and construction of line under Nagar Nikay Works, EDD-II, Rampur.

Amount

Carriage of the following material from Store Centre, Rampur to work site including loading & unloading.

11 KV VCB/Outgoing CTR/200/100/5A 350 MVA

ACSR Weasal Conductor

ACSR Rabbit Conductor

ACSR Dog Conductor

LT XLPE Cable 3.5x150 Sqmm

11 KV X:LPE Cable 3x120 Sqmm

AB Cable 3x95+1x70+1x160

AB Cable 3x120+1x95+1x160

AB Cable 3.5x150

LT PVC Cable 305x150 sqmm

LT PVC Cable 3.5x150 sqmm

11/0.4 KV 100 KVA T/F

11/0.4 KV 250 KVA T/F

Scrap GI Wire and Scrap ACSR Weasal Conductor( Site to store) and other line material etc.

Scrap Rabbit Conductor( Site to store) and other line material etc.

MS Matable Scrap(Recived Back Site to Store)

AB Cable 3x50(Recived Back Site to Store)

11/0.4 KV 100 KVA T/F(Recived Back Site to Store)

Junction Box (Recived Back Site to Store)

Cartage of Healty Transformer from store to site, dismantling of HT & LT connection & replace of follwoing capacity T/F from substation double poles/plinth by Healthy transformer(including connection) and loading and unloading with associated work at both ends within 70 kms.

Increasing load capacity of overloaded by 100 KVA trasnformer

Increasing load capacity of overloaded by 250 KVA trasnformer

a) Single support Excavation of foundation Pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole), providing and laying of stone pad (300x300x75 mm) in the Bottom of the pit. Erection of support(pole) complete with fixing of 11 KV V-type cross-Arms and other accessories by providing clamps made of MS flat of size 65x65xc6 mm with Nuts & Bolts, as per RESPO Norms.

8.5 Mtr long PCC Pole

11 Mtr long ST Pole

b) Double pole structure Excavation of foundation pit in size of 75x45cm having depth of 1/6th of the full length of the support(pole)Erection of support(pole) complete with providing and fixing of all clamps made of MS flat of size 75x8 mm. an other accessories . The work includes fabrication work and fixing of cross bracing sets 3.5 Mtr from MS Angle 65x65x6 mm/50x50x6 mm. The work includes cutting holes and providing MS Bolts of 16x40 mm size in the middle of the cross bracing with 1 No. sparing washer of proper size.

8.5 Mtr long PCC Pole

Grouting of support in CC 1:4:8(cement, sand & 40 mm. brick ballast) Grouting will be done in the block of size 45x45cmx1/6th of full length of the support upto ground level, 30 cm plinth above the ground level with CC 1:3:6 (cement, course sand and stone grit) with muffing. The work includes back filling and proper ramming etc. a) Single support

8.5 Mtr long PCC Pole

11 Mtr long ST Pole

b) Double pole structure

8.5 Mtr long PCC Pole

Providing & Grouting of Stay Rods(20x1800)mm including all work of excavation, cement concrete in size of (0.60x0.60x0.30)M in the ratio of 1:4:8(cement, sand, 40mm brick ballast) including back filling of soil and proper ramming etc.

Providing Fixing, tightening and nozelling of stay wire with stay rod with the pole of required tension by providing stay clamps.

Earthing of support with MS Earth Rod of (20x2500)mm long including excavation of pit and driving MS Rod 3.0 M apart from support and 0.5 M below the ground level and connecting below the earth electrodes with the help of GI wire No. 8SWG and earthing lugs (Earting complete( Rod and wire) will be provide by the contractor)

Providing & fixing of 11 KV Pin Insulator with Pin as per RESPO Norms and as per direction of Supervising Engineer.

Providing & fixing of 11 KV Disc Insulator with Fitting as per RESPO Norms and as per direction of Supervising Engineer.

Providing & fixing of 33 KV Pin Insulator with Pinas per RESPO Norms and as per direction of Supervising Engineer.

Providing & fixing of 33 KV Disc Insulator with Fittingas per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ACSR Weasal Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ACSR Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of ACSR Dog Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding XLPE cable 3x120 Sqmm per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT XLPE Cable 3.5x150 Sqmm per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of Single XLPE Cable 1x16 Sqmm per RESPO Norms and as per direction of Supervising Engineer.(Single XLPE Cable provide by the Contractor)

Laying ,stringing and binding of AB Cable 3x95 per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of AB Cable 3x120 per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of Single XLPE Cable 1x35 Sqmm per RESPO Norms and as per direction of Supervising Engineer (Single XLPE Cable provide by the Contractor)

Laying ,stringing and binding of LT PVC Cable 305x150 sqmm per RESPO Norms and as per direction of Supervising Engineer.

Laying ,stringing and binding of LT PVC Cable 3.5x150 sqmm per RESPO Norms and as per direction of Supervising Engineer.

Providing and Fixing Gi Pipe 6" Dia & GI Pipe with Clamp with fitting on DP (Double Ckt) as per direction of Supervising Engineer.

Filling & Fixing Jointing Kit as per direction of Supervising Engineer

Providing & Installing of Junction Box 3 Phase with fitting by providing of Clamps & bolt and nuts as per RESPO Norms and as per direction of Supervising Engineer.

Installing of 11 KV VCB/Outgoing CTR/200/100/5A 350 MVA as per RESPO Norms and as per direction of Supervising Engineer.

Construction of plinth for 250 KVA Transformer 2x2x1.5 M with fencing as per RESPO Norms and as per direction of Supervising Engineer (Material for plint and fencing will be provide by the Contractor)

Digging of trench for underground cable double Ckt 3x120 Sqmm Cable as per direction of Supervising Engineer.

Laying of underground cable double Ckt 3x120 Sqmm Cable with the help of joint kit

Laying of over head cable double Ckt 3x120 Sqmm Cable with the help of joint kit

Dismantling of old AB cable as per RESPO Norms and as per direction of Supervising Engineer.

Proper Body & Neutral & Earthing of T/F as per RESPO Norms and as per direction of Supervising Engineer(Earthing complete will be provide by the contractor)

Dismantling of Weasal Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Dismantling of Rabbit Conductor as per RESPO Norms and as per direction of Supervising Engineer.

Providing of PCC Pole 8.5 Mtr. Long

Providing of ST Pole Mtr. Long

Providing and fixing of X-Arms with Clamps and Nuts & Bolts

Providing and fixing F Bracket with Nuts & Bolts

Providing and fixing Aluminium Binding Wire

Providing and fixing Aluminium Lug

Providing and fixing Stone pad

Providing and fixing suspension clamp with nuts

Providing and fixing Dead & Clamps with I-Hook

Providing and fixing T-Off with clamps.

Providing and fixing Danger Plate with Clamp

Providing and fixing D/P Clamps.

Providing and fixing Top Channel

Providing and fixing Dropper Channel

Providing and fixing MS Angel 75x75 for T/F Base.

Providing and fixingNut and bolt

M.A.ELECTRICALS

M/S R.S. ENGINEERING TRADERS