Loading
Loading…
Loading…
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
1 Sept 2026, 6:00 pm7d left
GE Dehradun
GE (MES) Dehradun, Garhi Cantt, Mall Road, Tele - 01352750580
SPL REPAIR TO BDY WALL OF OFFRS MESS (226X2.13 MTRS) , 5 GARH RIF UNDER GE DEHRADUN AND PROVN OF LIGHTNING ARRESTER IN CSD DEPOT DEHRADUN
2026_MES_782587_1
8274/A/E8
Open Tender
Civil Works
Item Rate
180 days
GE Dehradun
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Dehradun
₹93,000
Yes
1 Sept 2026
4 Aug 2026
4 Sept 2026
4 Aug 2026
1 Sept 2026
24 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.05 | DESCRIPTION OF ITEMS | - | - | - | - |
| 1 | Demolition of Concrete in ground floors or above and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. | 20 | Cubic Metre | - | - |
| 2 | Material and labour for brick work with sub class ‘B’ bricks(old size), straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. | 110 | Cubic Metre | - | - |
| 3 | Material and labour for brick work (except bricks) straight or curved on plan exc 6 metre mean radius built in CM 1:6 (old size brick) including demolition of brick work built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed. | 60 | Cubic Metre | - | - |
| 4 | Supply and fixing of TMT bars 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips.complete all as specified and directed. | 3,500 | Kilogram | - | - |
| 5 | Supply and fixing of TMT MS bar 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia complete all as specified and directed. | 1,750 | Kilogram | - | - |
| 6 | Material and labour for RCC Type B-1, M-25 Design mix (20 mm graded aggregate) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. | 20 | Cubic Metre | - | - |
| 7 | Material and labour for formwork flat fair finished surfaces to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed. | 150 | Square Metre | - | - |
| 8 | Demolition of reinforced brickwork in suspended slab beam , lintel etc in cement mortar or cement concrete (reinforcement cut are required to faciliate demolition) complete all as specified and directed. | 65 | Cubic Metre | - | - |
| 9 | Material and labour for RCC M-25 Design mix { using 20 mm graded stone aggregate) in Foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc and mass concrete complete all as specified and directed. | 25 | Cubic Metre | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.62 MB
BOQ_876786.xls
BOQ • 1.54 MB
Tenderdocuments.pdf
Tender Documents • 1.74 MB
8274.pdf
PDF • 0.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].