Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.6 LAccepted-AOC | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹34.0 L+₹25,889.40 (0.77%)Rejected-AOC 34 RAJA ROAD DEHRADUN UTTARAKHAND 2480001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC R | |
| 3 | L3₹34.1 L+₹36,510 (1.08%)Rejected-AOC PLOT NO 4 NAYA GAON HARIPUR KANWALI P O SEEMADWAR DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-AOC R | |
| 4 | L4₹34.4 L+₹71,030 (2.11%)Rejected-AOC 00 JAI BHAWANI COMPLEX MAIN ROAD SADAR WARD JAGDALPUR BASTAR CHHATTISGARH 494001 UDYAM CG 01 0003803 | BASTAR | CHHATTISGARH | 494001 | L4 | Rejected-AOC R | |
| 5 | L5₹36.4 L+₹2.7 L (8.07%)Rejected-AOC INDEX NO E 72 HQ CWE HILLS VILL PO MEHUWALA MAPHI NEAR RAJKIYA INTER COLLEGE DEHRADUN UK | DEHRADUN | UTTARAKHAND | 248001 | L5 | Rejected-AOC R |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
REPAIR TO ROOF OF CERTAIN BUILDINGS UNDER AGE B R I AT IMA DEHRADUN
2022_MES_549820_1
GE/IMA/T-49 of 2022-23 9234/E8
Open Tender
Support/Maintenance Service
Item Rate
120 days
GE IMA Dehradun
as per NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹90,000
Yes
25 Nov 2022
3 Sept 2022
19 Oct 2022
4 Sept 2022
17 Oct 2022
3 Oct 2022
Amount
Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc complete as specified.
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 Cm thick (below or above ground level) complete all as directed.
Dismantling of brick masonary walls in roof parapets built in cement mortar of any description, complete all as directed.
M & L for roughening of old concrete surfaces of floor by picking, sweeping clean and washing down with water to remove dust etc and brushing neat cement slurry with 3.0 kg cement per square metre complete all as specified and directed.
M & L for cutting out cracks to V-section, 15mm X 15mm on existing roofs or terracing, cleaning out, wetting etc and filled solidly with crack seal paste of Sikka/CICO/Asian/Dr Fixit as per manufacturer's instructions, finished the roof suface properly, complete all as specified and directed.
M & L for PCC 1:2:4 , type B-0 ( using 12.5mm graded crushed stone aggregates) as in roof padding, laid in proper slope and finished fair and even, complete all as specified and directed.
M & L for Roof treatment by applying a coat of cold applied oil based bituminous primer over cleaned surface @ 0.50Kg/Sqm, and laid 3mm thick APP modified five layer polymeric membrane , minimum weight not less then 3.60 kg/Sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) with torch application method as per manufacturer's instrutions with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces with grooves & make good in cement mortar 1:3, finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm etc complete including taking down existing roof treatment of the RCC slab, cleaning off all foreign materials by wire brushing, cleaning roof surfaces with water and removal of spoil out side the defence premises, complete all as specified and directed. Make : STP / Sika/ Fosroc/Asian Paint Ltd, as recmmended by Engr-In-Charge and asapproved by GE. Note :- (a) Work shall be executed by authorised applicator of manufacturer as per manufacturer's instructions and upto roof height of triple storied building. (b) 10 years manufacturer's guarantee shall be given by the contractor. Work will be executed in smart assurance system complete all as specified and directed.
M&L in repairs water proofing treatment on roof slab including picking, sweeping cleaning and washing down with water to remove dust & providing water proofing treatment described as under:- (a) Surface preparation with polymer modified mortar ,GP grout mortar and treating of construction joints, filling of honey combs. (Cement: Sand (crasher stone dust): multipurpose polymer of Asian / Sikka/ Berger (b) Cleaning the surface and applying (Resin & Hardner) Epoxy Primer Sikka /Asian/Berger ) on the cleaned surface for bonding of rubberised polyurethane based coating with the existing concrete surface. (c) Supplying, providing and applying water proofing treatment to Terrace area with rubberised polyurethane based coating, single component highly elastomeric seamless cold applied modified PU coating or equivalent product of Sikka/ Berger/Asian) including all necessary surface preparation, coving using multipurpose polymer, water pond test, etc. complete as per manufacturer's specifications and application methodology. The same coating shall be applied in two coats achieving a total thickness of 1.00mm Thick. The coating shall have dual combination of 250% elongation, complete all as specified and directed. Make : Sika/Berger/Asian Paint Ltd, as recmmended by Engr-In-Charge and as approved by GE. Note :- (a) Work shall be executed by authorised applicator of manufacturer as per manufacturer's instructions and upto roof height of triple storied building. (b) 03 years manufacturer's guarantee shall be given by the contractor. Work will be executed in smart assurance system complete all as specified and directed.directed.
M & L for providing 20mm thick plaster in cement mortar 1:4 over concrete roof surfaces, mixed with Sika Latex SBR/STP Latex Water proofing compound (Liquid) as per manufacturers instructions including brushing neat cement slurry @ 3 Kg/Sqm over old RCC roof including taking down existing plaster on roof complete all as specified and as directed. Note : Sika Latex SBR Water proofing compound (liquid) shall be measured and paid seperately.
M & L for brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.
M & L for brick work with except bricks obtained from dismantling, straight or curved on plan exc 6.00m mean radius built in cement mortar (1:6) complete all as specified and directed.
M & L for rendering 15 mm thick in cement mortar (1:4), mixed with Sika Latex SBR/ Shali Latex of STP, compound (Liquid) @ 1 Lit per bag of cement or as per manufacturers instructions, on brick or concrete surface finished even and smooth, complete all as specified and directed. Note :- WPC Sika Latex SBR/ Shali Sbr Latex of STP, shall be measured and paid separately.
Supply only Sika Latex SBR/STP Latex , conform to EN 1542, complete all as specified & directed.
M & L for PCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in coping and benching, kneelers, bed plates, kerbs etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc , complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning etc, Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc 250 ltr n.exc 500 ltr capacity including washing with bleaching powder and hoisting if required reconnecting and refixing cleaned tank in position and writting date of cleaning with white paint after roof treatment , complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning etc, Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc 500 ltr but n.exc 1000 ltr capacity including washing with bleaching powder and hoisting if required reconnecting and refixing cleaned tank in position and writting date of cleaning with white paint after roof treatment , complete all as specified and directed.
Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning etc, Cleaning and removing all scale and dirt, etc from tanks and from mouths of circulating pipes, exc 1000 ltr but n.exc 2000 ltr capacity including washing with bleaching powder and hoisting if required reconnecting and refixing cleaned tank in position after roof treatment , complete all as specified and directed.
S&F Sand witched Polycabonate coloured roof sheet of 10mm thick, including aluminium strips and rubber packing including sealing of joints properly with epoxy sealing compound etc, and fixing with screws , rubber& steel washers in metal frames in circular domes of anterooms including dismantling of existing sheet etc complete all as directed. Note:- Wastage of sheets in circular domes deemed to be included in the quoted rate.
S & F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dismantling existing AC sheet, complete all as specified and directed.
S & F Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridges fixed with self tapping screws etc including dismantling existing sheet, complete all as specified and directed.
S & F Pre- painted colour galvalume aluminium Zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc including dismantling of existing AC sheet complete all as specified and directed.
S & F 4mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework size of main tee 38mm X 25mmX 1.4mm, cross tee 38 mm X 25 mm X 1.4mm, angle along walls 38 mm X 25mm X 2.0 mm and including taking down existing boards any thickness including cover fillets etc complete all as directed
Dismantling timber scantling 40 Sqcm and over in section ( framed work ) in any position,in purlins rafters etc complete all as specified and directed.
S & F of 2nd class hard wood in scantling, clean sawn in any position and any description as in framed work complete all as specified and directed.
M&L, Hollow mild steel work as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed including dismantling existing wooden frame work of ceiling grid complete all as specified and directed. Note :- The work shall be carried out upto 15m height.
S&F 4mm thick plain cement board work in ceiling upto 7.5m height, fixed to timber frame work with screws including all necessary arrangements like scaffolding, ladders etc including dismantling of old unserviceable ceiling boards, fillets all complete all as specified and directed.
S&F 2nd class hard wood plain fillets, section exc 3 & n. exc 6 Sqcm, rectangular or triangular in scetion, clean sawn, secured with nails complete all as specified and directed.
Preparation of surfaces of wood or wood based material new or old of any description and girth and treated with creosote oil complete all as specified and directed.
Preparation of new or previously untreated steel/iron surfaces of any description, over 10 cm in width or girth and applying two coat of synthetic enamel paint with approved shade over a coat of red oxide primer, complete all as specified and directed
Preparation of new plastered surfaces of wall and applying two coats of cement based paint all as directed
Preparation of new plastered/cement board/ unplastered surfaces of ceiling and applying two coats of white wash on ceiling complete all as specified and directed
Preparation of new wood or wood based surfaces of any descriptionn. exc 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coat of synthetic enamel paint over a coat of wood primer complete all as specified and directed
Preparation of surface cleaning, drying, making it sound & free from surface contaminants, removal of dust, laitance, grease, oil, curing compounds from release agents & other foreign particles, by wire brushing, grinding etc, incl removal of all old sealent and other treatments (if any) and Supply and apply of material for repairing the edges of the joints (in case of weak concrete at joint edge) and also configuring joint width ( in case of expension joints with irregular width more than the width of the chosen sikadur combiflex tape width) with appoxy repair mortar Sikadur 31 and Sikadur 41, as per manufacturers instructions, complete all as specified and directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of Sika. 2. The work shall be carried out upto 10m height.
Supply and applying epoxy based membrane Adhesive SikadurR -31C @ 3.0 kg per mtr as base coat having mixed density 1.75kg per litre, bond strength >1.5 N/ Sq mm on both sides of joints, as per manufacturers instructions, complete all as specified and directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of Sika. 2. The work shall be carried out upto 10m height.
Supply and apply 2mm thick and 300mm width flexible FPO based membrane sikafdur® - combiflex® SG system chemical based modified flexible polyolefin (FPO) with advanced adhesion. Fire rating Euro class E ( EN-ISO 11925-2, classification to EN 13501-1), service temperature -300C min to + 400C max in wet condition -300C degree C minimum, plus 600C maximum in dry condition. And the product should have Tensile strength > 12N/mm2 (EN 12311-2), Tear strength >40 N/mm (ISO 34-B), Elongation at break >600% (EN 12311-2)and should pass thermal aging : 7500h passed (SIA V280, 1996), as per manufacturers instructions, complete all as specified and directed. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of Sika. 2. The work shall be carried out upto 10m height.
Supply material and apply epoxy based membrane adhesive Sikadur -31® @ 3.0 kg/m as base coat having mixed density : 1.75kg/ltr; bond strength > 1.5N/mm2 on th sides of joint, as per manufacturers instructions, complete all as specified and directed.
S & F 1.00 mm thick Stainless steel sheet of gde 304 of required width or girth, bent to shape for protection of membrane, fixed in staggered counter holes with SS screws and rubber/ bitumen and steel double washers all as per manufacturer's specifications/ instructions, complete all as specified and directed.
Supply and apply solvent free, moisture insensitive epoxy resin-based patch repair putty on pipe penetration surfaces including cutting a minimum 40 to 50mm wide groove around the mouth of 150 to 200 mm bore rain water pipe and cleaning, washing with watwr,making dust free surface, filling the cavities in the Pipe section with suitable free flowing Grout Material - Sika Grout 214 and then applying Sikagard®-694 F (I) , Yield: 0.6 ltr/kg, putty to a thickness of minimum 20mm on pipe and concrete joint, as per manufacturer's specifications/ instructions, finishing smooth the pipe mouth for proper flow of rain water, all complete as specified and directed. Product requirements: suitable for submerged condition; compressive strength of 40 N/mm2 (1 day) according to IS 9162-1979. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of Sika. 2. The work shall be carried out upto 10m height.
M & L for preparation of old concrete surfaces, masonry wall and concrete joints, Chajja with facia, by taking down existing concrete, cleaning loose / friable materials, making dust free surfaces and applying Sika MonoTop-122 F, dual shrinkage compensated trowelable fibre reinforced, thyrotrophic high strength mortar for structural concrete repairs, with 40 mm average thickness of repair mortar , finished the surfaces even and smooth. The consumption of the repair mortar should be ideally ~2200 kg/m3 at water: powder ratio of 0.16. The manufacturer must be an ISO 9001 & 14001 certified and valid certificates must be produced as proof. Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of Sika. 2. The work shall be carried out upto 15m height.
M & L for providing and applying 1.00mm thick layer in two coats of SIKALASTIC®-562 IN (DAVCO K10 POLYURETHANE PLUS) of Sika or Shaliurethane Btd of STP, with embedded fiber mesh of 40 gsm over a thoroughly prepared clean and sound surface of the parapet wall . A single coat of water based epoxy primer Florprime WB shall be applied with a consumption of 0.2 kg/sqm prior to the application of SIKALASTIC®-562 IN (DAVCO K10 POLYURETHANE PLUS) with over the Plaster surface finishing level. The products shall be applied in strict accordance with the manufacturer's specifications. Technical Properties:Elongation at Break : 380%Tensile Strength: >3 N/mm2Crack Bridging: >2 mmAdhesion to Concrete: >1.03 MPA Shore Hardness: 85Coverage: 2.2 kg/m2 ( Two coats). Note :- 1. Work shall be carried out as per manufacturer's instructions by authorised applicator of Sika. 2. The work shall be carried out upto 10m height.
S & F Hollow mild steel framed work such as grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing framed work of water tanks, cable support tray as per site requirement and similar work including pintal hinges, stops hand made sliding bolts etc complete all as specified and directed
S&F PVC 75mm bore spout pipe 45Cm to 50Cm long for clearance of rain water in roof terrace & chajjas etc upto 15 mtr height including cutting and opening of hole for inserting spout in masonary or concrete wall surfaces, makig good the sides of pipe / disturbed surfaces in PCC 1:2:4 type B-0( using 12.5mm crussed stone aggregate) or in cement mortar 1:3, complete allas directed.
S&F PVC (SWR) 75mm bore plain bend of any radius all complete as directed.
S&F PVC (SWR) 110mm bore pipe single socketed in any length with rubber ring joints, fixed to wall with PVC clamps and SS screws, as rain water pipe, complete all as directed.
S&F PVC (SWR) 110mm bore plain bend of any radius all complete as directed.
S&F PVC (SWR) 200mm bore pipe single socketed in any length with rubber ring joints, fixed to wall with PVC clamps and SS screws, as rain water pipe, all complete as directed.
S&F PVC 200mm (SWR) bore plain bend of any radius complete all as directed.
Shree Durgai Construction Co.
sweety pest control
Sanjay Enterprises
M/s RK ENTERPRISES
Sharda Enterprises
Aron Water Proofing and Pest Control
M/S S P BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .