Shetrunji Irrigation Scheme:-Repairing work of control room and inspection bunglow and other miscellaneous work at shetrunji dam site..

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Item Description of Item (with brief Quantity Unit Rate In Amount

No specification and reference to book of figures

specifications)

1.00 Dismantling of RCC work viz. slab, beam, 3.00 cum 1362.00

lintel, barrel, staircase, etc. including

Removing the steel from the dismantled

portion without damage to reinforcement

sorting and stacking of useful and

unuseful material from the dismantled

material as directed etc comp.

2.00 Excavation for foundation upto 1.5 m 1.89 cum 212.52

depth including sorting out and stacking

of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A)

Loose or soft soil

3.00 Removing plaster including racking out 1152.25 sqmt 71.00

joints 20mm deep etc complete.

a) Cement Plaster

4.00 Brick work using common burnt clay 8.39 cum 4310.73

building bricks having crushing strength

not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:5. (1-

Cement : 5 -fine sand)(B) Conventional

5.00 Cement plaster 20mm thick in single coat 1215.90 sqmt 261.00

to stone masonry in C.M. 1:3 incl

Finishing,curing,scaffolding etc complete.

a) UPTO 6.0 Mt HEIGHT

6.00 Applying two coats of putty & two coats 34.80 sqmt 40.59

of primer of approved brand and

manufacture on new wall surface to give

an even shade including thoroughly

brushing the surface free from mortar

dropping and other foreign matter and

sand papered smooth

7.00 Wall painting (two coats) with plastic 34.80 sqmt 84.82

emulsion paint of approved brand and

manufacture on undecorated wall surface

to give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and

sand papered smooth.

8.00 Painting one coats (excluding priming 0.81 sqmt 59.35

coat) on previously painted steel and

other metal surface with enamel paint,

brushing to give an even shade including

cleaning the surface of all dirt, dust and

other foreign matter.

9.00 Painting one coats (excluding priming 2.70 sqmt 60.88

coat) on previously painted wood and

wood based surface with enamel paint, to

give an even shade Including cleaning the

of all dirt, dust and other foreign matter.

10.00 Providing & Laying in position 'NOMINAL 5.40 CUM 4458.00

MIX' cement concrete using cement sand

and crushed aggregate by machine mix

incl. necessary formworks ,centering

compaction by mechanical vibrator

curing as directed with all lead & lift etcE)

Concrete grade 1:1.5:3 and MSA-

11.00 Providing,cutting,bending,binding and 0.28 MT 76574.00

fixing in position as per drawing .TMT

BAR , Reinforcement for R.C.C. works and

anchor bars incl cost of black annealed

to 18 BWG M.S.. Wire etc.complete with

all lead and lift.

12.00 Metal Beam Crash Barrier 200.00 METER 3434.00

Type - A, "W" : Metal Beam Crash Barrier

(Providing and erecting a "W" metal

beam crash barrier comprising of 3 mm

thick corrugated sheet metal beam rail,

70 cm above road/ground level, fixed on

ISMC series channel vertical post, 150 x

75 x 5 mm spaced 2 m centre to centre,

1.8 m high, 1.1 m below ground/road

level, all steel parts and fitments to be

galvanised by hot dip process, all fittings

to conform to IS:1367 and IS:1364, metal

beam rail to be fixed on the vertical post

with a spacer of channel section 150 x

x 5 mm, 330 mm long complete as per

13.00 Pro. And fixing single layer water proof 308.04 sqmt 606.95

gypsum board 12.5 mm thick sections

using water proof board of size 1220 mm

x 1830 mm x 8.0 mm suspended by GI

suspender channel of size 25 mm x 3 mm

with intermediate channel og size 18 mm

x 40 mm x 0.8 mm at 1220 mm center to

center ceiling section of size 40 mm x

mm x 0.55 mm at 457 mm c/c and

perimeter channel A of size 20 mm x

mm x 30 mm x 0.5 mm at edges & drops

incl.paper tap sand sofit cleat, anchor

fastener, scoch bolt connecting

leat,joining compound top coat on ceiling

incl.making necy.opening for light

fitting,diffuser etc. comp. as per detail

drawing as directed

14.00 Providing and fixing in position led 1.00 nos 77032.70

channel, fabrication with fitting and

transportaion, as per instruction of

engineer in charge. (size- 10' * 5' )

15.00 Providing and fixing prefabricated office 2.00 nos 232300.00

12ft*14ft*8.5ft with office table 5ft*2.5ft

and 2 nos of law back revolving chair

with transportation and as per

instruction of engineer in charge

16.00 Providing and fixing 200W flood light as 59.00 nos 2424.00

per instruction of engineer in charge

17.00 Providing & fixing wooden wall panelling 58.20 sqmt 1694.00

with using 50 mm x 25 mm size plain M.S.

pipe frame and support and 12 mm thick

BWP grade ply wood IS 710 with 4 mm

thick veneer of green deco wood or eq of

approved design & pattern with teak

wood/ white beach/ wenge wood batten

stripes as per architectural detail with

necessary fixtures & fastening including

minimum 3 coats of melamine polish

work with minimum 2 base coats of

sealer, surfacer etc as per manufacturers

instructions etc. complete in all size,

shape and at any height up to the

satisfaction of Architect/ Site Engineer. In

case of changes in sizes, design , GI

sections sizes and thickness, colours,

material, hardware the architect’s

decision shall be final and binding and all

the samples are to be approved before

starting the work and one full scale

sample to be made on site of full height

and approval to be obtained from

architect and changes and corrections are

to be made before starting the full scale

work at site with out any extra cost. The

entire work is to carried out as per the

best industry practices and in excellent

18.00 Steel work, welded in built up sections 37.70 quintel 9108.48

framed work including cutting, hoisting,

fixing in position and applying a priming

coat of read lead paint. (A)In beams and

joists, channels angles Tees, flats, with

connecting plates or angle cleats as in

main and cross beams. Hip and jack

rafters, purlins conneted to common

rafters and the like (upto 10 ton)

19.00 Providing and fixing designer wall-paper 164.91 sqmt 466.98

for wall with all material,labour and

fixing charge, as per instruction of

engineer in charge

20.00 Providing and fixing designer roller 28.59 sqmt 1521.46

blackout curtain for window with all

material,labour and fixing charge, as per

instruction of engineer in charge

21.00 Providing and fixing designer channel 25.20 sqmt 565.60

curtain for door with all material,labour

and fixing charge, as per instruction of

engineer in charge

22.00 Providing and Fixing Machine cut, free 28.85 sqmt 3683.47

edges, machine polished Granite stone

slab 18 mm thick for wall as per design

including full molded round front edge

and 1 cm nosing and laid on 10 mm thick

cement mortar 1:3 ( 1 cement:3 coarse

sand) jointed with grey cement slurry

including rubbing and polishing finishing

23.00 Providing and fixing steel latter(SS- 1.00 nos 52015.00

304,Golden) in position , fabrication with

fitting and transportaion, as per

instruction of engineer in charge.

(11inch-9, 9inch-24, 4inch-9, 5inch-5)

24.00 Providing and fixing in position lights (at

silling, wall)with fitting,wiring and

transportaion, as per instruction of

engineer in charge.

A) Modern celling light led (2 square 12.00 nos 2020.00

B) Surface ceiling light 20.00 nos 1919.00

c) Luxurious hanging light 5.00 nos 2525.00

D) Pillar mounted post light flower 40.00 nos 1100.90

25.00 Providing and erecting approved make 1.00 nos 36455.00

split air-conditioning unit consisting of

copper condensing unit with fan motor,

hermetically sealed rotary compressor

with accessories etc. duly connected

separately erected evaporating unit and

blower motor with its accessories by

means of extra supplied proper insulated

copper tubing,drain PVC pipes suitable

for ( cost includes powder coated Stand,

Eco Friendly green gas charging, 15A plug

top & Remote Control) with necessary

core cutting. (1)For ISEER Range

(KWH/KWH)(3.1 to 3.99) (b) for 1.5 ton

26.00 Finishing wall with weather proof 1890.77 sqmt 122.14

exterior emulsion paint on wall surface

(two coats) to give an required shape

even shade after thoroughly brushing the

surface to remove all dirt, and remains of

loose powdered materials.etc complete

27.00 Providing and erecting ISI marked ABC 12.00 nos 2979.50

type stored pressure fire extinguisher

(suitable for fire or solid,liquid,gas and

electricity) in 6KG.etc complete

28.00 Providingandfixing35mmthickshuttersfor 10.29 sqmt 4101.06

Doors,windows and clear storywindows

includinganodisedalluminiumbutt

hingeswithnecessaryscrews.(A)

IndianTeakWood(1)Fully Panelled

29.00 providing turfing to the D/S slope of 13500.00 sqmt 66.50

earthen dam with necessary selected soil

covering, bio-organic manure, watering

30.00 Providingand laying marble chips 63.00 sqmt 660.09

skirting(Terrazo)or dedo rubbed,and

polished to Granolithic finish to player

6mm thick with white,black or white and

black marble chips of size from smallest

to 4mm nominal size laid in cement

marble powder mix 3:1 (3-Cement :

marble powder by weight) in

proportionof 4:7 (4-cementmarble

powdermix : 7-marble chipsbyvolume)

20mm thick with under layer 14mmthick

cement plaster1:3(1-cement :3-coarse

sand) (A) Darkshade pigment with

ordinary cement (In top layer only)

31.00 providing safety life jacket and safety 10.00 nos 3500.00

ring as per instruction of engineer in

32.00 providing photography and videography 1.00 nos 5000.00

as per instruction of engineer in charge .

In word: fourty two lakh twenty sevel thousand three hunred seven point seventy three

I/We am/are willing to carry out the work at… ...................... % above/below percent(Should

be written in figures and words) of the estimated rate mentioned above. Amount of my /our

tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

(B) For Item Rate Tender (For above INR 50 Cr.):

Item Description of Item Quantity Unit Rate Amount

No (with brief specification

and reference to book of In In

specifications) figures Words

(A) Total Tendered Amount

(B) Rebate on above tendered amount (if any) % (in figure) ………………………………

(C)Net Tendered Amount (A-B) (in figure) ………………………………

1 The Contractor shall exhibit a board with detailed specification and details of work as

directed by the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per

Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in

S.O.R. therefore in R.C.C. items where there is a change as per actual mix design the cost

of difference of cement consumption have been deducted from the rate of original item

at the rate of input rate mentioned in all the tender.

5 Payment will be given only if the material testing result is satisfactory. Testing of

material shall be done as per statement attached with specification.

Signature of Contractor Deputy Executive Engineer Executive Engineer

Irrigation Sub-division no.1 Bhavnagar Irrigation Division

Palitana Bhavnagar