UPGRADATION OF BUILDING OF DISTRICT INDUSTRIES CENTRE SAMBA INCLUDING CONSTRUCTION OF ADDITIONAL RECORD ROOM WITH PARKING SHED

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead to the disposal site, as directed by Engineer-in-Charge all kinds of soil

Dismantling Bituminous road manually/ mechanically including stacking of serviceable material and disposal of unserviceable material to the disposal site/dumping ground as per direction of Engineer-in-charge.

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground as per directions of Engineer-in-charge.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material to the disposal site as per direction of Engineer-in-charge in cement mortar.

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material to the disposal site/dumping ground as as per direction of Engineer-in-charge

Providing and laying in position cement concrete of specified grade including curing centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including all carriages complete job.

Providing and laying in position cement concrete of specified grade including curing centring and shuttering. All work upto plinth level with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including all carriages complete job.

Reinforced cement concrete work in arches, archribs, domes, vaults shells, folded plate and roofs having slope more than 15° upto floor five level, level including curing centering, shuttering finishing with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete job.

Providing and laying in position specified grade of reinforced cement concrete including curing centering, shuttering, finishing. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) including all carriages complete job.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate including all carriages complete job.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more Make (Jindal Panther/ Tata Tiscon/ SAIL) complete

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete job.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete job. Hot finished welded type tubes

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand including all carriages complete job.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) including all carriages complete job.

15 mm cement plaster on the rough side of single or half brick wall mix 1 : 4 ( 1 cement : 4 fine sand) including all carriages complete job.

6 mm cement plaster to ceiling of mix 1 : 3 ( 1 cement : 3 fine sand) including all carriages complete job.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm including all carriages complete job.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including all carriages complete job.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing, fixing and applying Plaster of Paris (POP) false ceiling consisting of frame work made with 50mm sq M.S. tubes of 18 G thickness as main runner at 600 mm c/c both ways, suspended/ supported with M.S. flats 25x4 mm from existing R.C.C. slab, finished smooth to line and level including necessary supports, scaffolding etc. as required and also including applying a coat of red oxide zinc chromate primer over the M.S. frame work and suspenders complete including providing and fixing expanded metal of size 5.25 mm x 1.25 mm thickness welded to main runners and applying POP (calcium sulphate semi hydrate variety) to the expanded metal of thickness not less than 10 mm complete.

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side including all accessories complete job.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Painting top of roofs with bitumen of approved quality at 17 kg per 10sqm impregnated with a cost of coarse sand at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of clothlightly soaked in kerosene oil complete with residual type petroleum bitumen of grade VG-10

10cm thick (average) mud phaska of damped brick earth on roofs laid to slope consolidated and plastered with 25 mm thick mud mortar mixed with bhusa at 35kg per cum of earth and gobri leaping with mix 1:1 (1 clay: 1 cow dung) and covered with specified tile bricks grouted with cement mortar 1:3 (1 cement: 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement and finishing neat With common burnt clay (non modular) brick tiles of class designation 10.0 Complete job.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase Compete job.

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge.

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion (i) Single socketed pipes 110 mm diametre

Providing and fixing on wall face un-plasticized - PVC moulded fittings /accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion 110 mm bend.

Providing and fixing un-plasticised -PVC pipe clips of approved design to un-plasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete 75 mm.

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall (15 mm dia. nominal bore).

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall (20 mm dia. nominal bore).

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodized (anodic coating not less than grade AC 10 as per IS : 1868) aluminum lever handles of approved quality with necessary screws etc. complete. Make (Link, Harrison, Godrej)

Providing and fixing PVC panelling on wall surface including fitting etc. complete job.

EngagingPlumber & Helper for dismantling of Sanitary items & G.I fitting stacking it 50 mtr lead.

Plumber

Helper

Engaged Sweeper for clearance of toilet blocks.

Clearance of Septic tank size (12' X 12' x 10')

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. (Make of Wire : Havells/Anchor/VGuard/KEI) (Make of Conduit : AKG/Anchor/Finolex/Polycab)

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (Make: Havells/Vguard/Finolex/Anchor)

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (Make: Havells/ Legrand/ Vguard/ Norisys/Anchor)

Supplying and fixing PVC batten/ angle holder including connections etc. as required.(Make: Anchor/Havells/Vguard)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Make: VGuard/ Havells/Crompton/Usha/Anchor / Bajaj)

Supply, Installation, testing and commissioning of exhaust fan with louvers of folowing size including connection etc as required.(300 mm sweep) (Make: VGuard/ Havells/ Crompton / Usha)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of T5 batten 15 watt complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: VGuard/ Havells /ABB/ Siemens/Schneider)

SINGLE POLE

SINGLE POLE AND NEUTRAL

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: VGuard/ Havells/ABB/Siemens/Schneider)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earthbar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make: Havells/ ABB/ Legrand/Siemens/Schneider)

8 way, Double door

12 way, Double door

Supply and fixing of PVC Type Switch Box/Gang (Modular type) (MAKE: Anchor/Havells/Equivalent)

1/2 Module

3 Module

4 Module

6 Module

8 Module

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Make: Havells/ ABB/ Legrand/ Norisys)

5/6 amps switch

3 pin 5/6 A socket

15/16 A switch

6 pin 15/16 A socket

Telephone socket outlet

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.(Make: Havells/ABB/Legrand/Norisys/Anchor)

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

Supply of pre-wired, fluorescent fitting / compact fluorescent fitting of T5 batten (20 watt) complete with all accessories. as required.(Make: Havells/ Wipro/ Crompton/ Philips)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB /RCCB /Isolator) (Make: Havells/ABB/Siemens/Schneider)

8 way (4 + 24), Double door

Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.(Make: Havells/ Scheneider/ legrand/ Simon)

Supply, Installation, Testing and commissiong of LED Street light (72 watts) including CI brackets, washers, nuts complete with all accessories as required and as desired by EIC (Make : Havells/Philips/Jaquar)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (Make: As approved by EIC/AKG/LPE)

63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3½ X 70 sq. mm (38mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required (Above 35 sqmm & upto 95 sqmm)

Supply and commissioning Of LT Power Cable 1.1 Kv Grade , XLPE Power cable ( Cable size: 3.5 C X 70 Sqmm)(Make: Havells/Polycab/RR cables/Finolex)

Aluminium Armoured Cable (Size: 3.5 C X 70 sqmm )

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.(MAKE: ISI)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.(Make: ISI)

Supply and erection of following size of G.I octogonal pole of dia 75-100 mm including base with required size of pole for mounting complete with all accessories as required for (5 mtr single arm )

Supply of 07 watt LED Bulb. ( Make: Panasonic/ Eveready/ Wipro/philips)

Cement bottoming 1:2:4 mix as per REC standards 0.5 cum/pole

Supplying, Installation, Testing and commissioning of Split Type Air conditioner ( Hot and cold) of rating 3 star and above including connection, fitting complete job including indoor and outdoor unit. The item is inclusive of outdoor unit wall bracket /stand for mounting of outdoor unit.( Make: Bluestar/Lloyd/LG/Voltas)

Supplying, Installation, Testing and commissioning of 5Kva Voltage Stabilizer with wide working range ( 90/100 v to 290v ) for air conditioning system.( Make: Vguard/Luminous/Microtek/Voltas)

Capacity: 5 Kva

Supplying, Installation, Testing and commissioning of recessed/ surface/ concealed LED Light of 18 watt.( Make: Panasonic/ Philips/ Crompton/ Wipro/ Havells)

Supplying, Installation, Testing and commissioning of prewired recessed mounted LED Ceiling 2'x2' Led panel fitting with drivers etc including connections with 1.5 sqmm FR PVC insulated copper conductor single core cable and earthing etc as required. (Make: Panasonic/ Philips/ Crompton/ Wipro/ Havells)

Supply, installation, testing & commissioning of 6 mtr long GI pipe/pole of C type with dia 62-75mm dia along with civil foundation 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 450 x 450 x 900 mm with base of GI pipe welded with iron rods to be fixed in concrete. the pole is inclusive of bracket for mounting of street light fixture on existing wall/pole including bending the pipe to required shape complete with GI clamps with nut bolts & washer with primer & finish paint, hardware fittings complete with all other accessories as required.( The length of the pipe comprising of bending plus straight pipe) Make:Suryaprakash/Jindal/Tata or equivalent

Supply , installation, testing and commissioning of 40 watt solar street light( all in one Integrated) of following specifications:(Make:Havells/ Philips/Jaquar/ bajaj) wattage =40 w Lumanaire efficiency: ≥120lm/watt Min. Warranty= 2 years Charge controller efficiency> 90% Ingress protrction = IP 65

Supply & fixing of GI pipe 32 mm dia, 2 mtrs long GI pipe (medium class) suitable to mount LED fixture of 62 mm/53 mm dia, bracket for mounting of street light fixture on existing wall/pole including bending the pipe to required shape complete with GI clamps with nut bolts & washer painting the flat iron with primer & finish paint, hardware fittings complete with all other accessories as required. Make:Suryaprakash/Jindal/Tata or equivalent

Sanjeev Singh

RAM PARSAD SHARMA