MW to Development and Upgradation of Tourist Fcilites at Buddhist Stupa at Kesariya, East Champaran(Job work)

Provision for clearance of wild vegetation and preparation of earth surface for pathway parallel to north side of boundary wall from east to west direction.

Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge.

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, including filling the joints with same mortar, with common burnt clay non modular bricks: 1:4 (1 cement : 4 coarse sand)

Pointing on brick work or brick flooring with cement mortar 1:3 (1 cement : 3 fine sand):Flush / Ruled/ Struck or weathered pointing

Provision for scientific clearance and removal of displaced, decayed ancient bricks structures all complete. (for stupa periphery pathway)

Provision for laying lime concrete with lime surkhi traditional mortar 1:1:1 mix with 25 mm brick aggregate and molasses in appropriate proportion with all complete.

Provision for 25cm dia pilling as foundation up to a depth of 3 m including with all completed. (For drinking water )

Provision for Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors roofs, landings, balconies and access platform

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.ild steel and Medium Tensile steel bars.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Provision for 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)with completed

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)

Provision for cladding of outer wall with earthern clay terra-cota facing brick tiles (avg. thickness of 12-15 mm) with labour and materials all completed.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered inner wall surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade:New work (two or more coats) over and including water thinnable priming coat with cement primer. with all complete.

Provision for Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Provision for providing and Fixing Plumbing Work with materials etc. all Completed in office. (a) Under Counter Basin [Jaguar/Essco/Cera] [EACH] including gst

(b)Pillar Cock [Jaguar/Essco/Cera] [EACH]

(c)West pipe & Basin West [EACH]

(d)Water Tank [1000 ltr.] [EACH]

(e) CPVC 40mm [EACH]

(f) Connection Pipe [RMT]

(g) Angle Cock [Jaguar/Essco/Cera] [EACH]

(h) Fitting & Labour Charges [EACH]

Provision for Procurement of R.O Plant 250 ltr/hour with water chiller etc completed

Provision for disposal of dumped garbage around back side of toilet unit, drinking water unit through tractor trolley including cost of loading and unloading with labour outside of premises all complete. (For toilet block)

Painting work on toilet block and office

Electricity work in toilet block and office (a) Wire 6mm Copper wire [EACH]

(b) Wire 2.5 mm Copper wire [EACH]

(c) MCB 16 A [EACH]

(d) LED light [EACH]

(e) Switch [EACH]

(f) Socket [EACH]

(g) Electric Board [EACH]

(h) Switch Fuse Unit In Three Pole [EACH]

(i) Exhaust fan [EACH]

(j) Air conditioner 1.5 ton [EACH]

(k) 200 watt halogen light [EACH]

General repairing and plumbing work in eastern side toilet unit (a) Pillar cock [EACH]

(b) waste pipe & basin [EACH]

(c) water tank [EACH]

(d) CPVC 40 mm pipe [EACH]

(e) Connection pipe [EACH]

(f) Angle cock (Jaguar) [EACH]

(g) Fitting and labour charges [EACH]

(h) Wash basin [EACH]

(i) western toilet seat [EACH]

(j) health faucet [EACH]

(k) Mirror [EACH]

(l) door mat [EACH]

(m) hand wash in wall fix [EACH]

(n) miscellaneous items [EACH]

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete

Provision for fixing windows with grill, frame, glass etc. labour and material all complete.

Provision for making pond for water logging problem.

Repairing/removing work of damaged door and window in office and in toilet block unit