CONSTRUCTION OF PINK TOILET AT DIFFERENT LOCATIONS AND OPERATION & MAINTENANCE FOR 5 YEARS FOR AHMEDABAD MUNICIPAL CORPORATION IN SWZ(Re-invite)

Name of Work:- CONSTRUCTION OF PINK TOILET AT DIFFERENT LOCATIONS AND OPERATION & MAINTENANCE

FOR 5 YEARS FOR AHMEDABAD MUNICIPAL CORPORATION

Demolition & Dismantling work

Demolition of RCC work using Hydra Breacker including

stacking of servicable materials and disposal of unservicable

1 10.00 materials with all lead and lift.Removal Of Existing Building

Foundation and Super Structure If Any. (Item Code

Demolition of Brick work and stone masonry including

stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.(ii) In Cement

Mortar.Removal Of Existing Building Foundation and Super

Structure If Any.(Item Code 20003B R&B SOR 2023-24 Pg

Dismentaling of sheet roofing including ridges, Hips, Valleys,

Gutters etc. stacking of serviceable materials and disposal of

unserviceable materials with all lead and lift.(Item Code

20007A-B R&B SOR 2023-24 Pg No 140)

i 10 (i) G.I.sheet roofing. 47.25 Sq.mt

ii 3.00 (ii) A.C. sheet roofing. 53.55 sq.mt

Dismentling steel work including distempering and stacking

4 1500.00 the materials with all lead and lift.(Item Code 20003B R&B

Dismentling doors, windows, ventilators etc. (wood or steel)

shutters including chowkhats architraves, hold fasts and

other attachment etc. complete and stacking them with in all

lead and lift. (i)Notexceeding 3 Sq.M. in area. 165.9 Each

Removing & Scrapping of Old deteriorated Plaster of any

thickness from Masonary / R.C.C. member including stacking

6 200.00 of serviceable material & disposal of un serviceable from site

of work with all lead & lift.(Item Code 20003B R&B SOR 2023-

7 Excavation for foundation including sorting out stacking of

useful material & disposing of excavated stuff upto 50 mt.

lead. Loose & Soft soil.Executed With Manual Labour (Item

Code 04B001A/04B002A R&B SOR 2023-24 Pg No 50)

a 300 up to 1.5 mt. depth 201.81 Cu.M.

b 100 1.5 to 3.0 mt. depth. 222.72 Cu.M.

c 200.00 Add extra for Disposing off the excavated stuff of above

items for lead of (A) 50 m to 100 m(Item Code 04005A R&B

SOR 2023-24 Pg No 48) 17.28 Cu.M.

d 100.00 Add extra for Disposing off the excavated stuff of above

items for lead of (B) 100 m to 200 m (Item Code 04005B R&B

SOR 2023-24 Pg No 48) 34.56 Cu.M.

8 Provdg. & laying cement concrete 1:3:6 (1 cement : 3 coarse

sand : 6 hand broken stone aggregates 40 mm nominal size)

and curing complete excluding cost of form work in (Item

Code 20003B R&B SOR 2023-24 Pg No 52)

a 1 (A) Foundation and plinth (Item Code 05003A R&B SOR

9 28.00 Supplying of graded hand brocken stone size of 90 mm to

127 mm at site (Rubble or Spoul) AMC Approved Rate

10 120.00 Labour charges for spreading the spouls 90 mm to 127 mm

thick layer good earth filling in voids correcting the grade &

camber comp. with rolling, watering, incl. preparing

thesurface by brushing for removing all loose or dirts

ect.comp. (Approved Rate) 18 Sq.mt.

11 100.00 Provdg. & laying cement concrete 1:4:8 (1 cement : 4 coarse

sand : 8 hand broken stone aggregates 40 mm nominal size)

and curing complete excluding cost of form work in

foundation& plinth.(Item Code 05004A R&B SOR 2023-24 Pg

12 300 Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding

cm. in depth consolidation each deposited layer by ramming

and watering.(Item Code 4006 R&B SOR 2023-24 Pg No 48)

13 a 200.00 Conveyance charges of earth lime, murrum, building rubbish,

manure, garbage, sludge, excavated rock, fly ash, aggregate

of any kind etc. comp. upto 5 km lead.(Item Code 030201A1

R&B SOR 2023-24 Pg No 06)

b 200.00 Extra For Lead Above 5 km & upto 6 km 7.41 Cmt

c 200.00 Extra For Lead Above 6 km & upto 7 km 7.41 Cmt

d 200.00 Extra For Lead Above 7 km & upto 8 km 7.41 Cmt

e 200.00 Extra For Lead Above 8 km & upto 9 km 7.41 Cmt

f 200.00 Extra For Lead Above 9 km 7.41 Cmt

14 10 Filling in plinth with sand under floors including watering,

ramming, consolidating, compacting and dressing etc.

completed.(Item Code 04007A R&B SOR 2023-24 Pg No 48)

15 250.00 Filling in foundation and plinth with murrum or selected soil in

layers of 20 cm. thickness including watering, ramming and

consolidating etc. Complete. (Item Code 04008A R&B SOR

16 Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation

and plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional(Item Code 06002BA R&B SOR 2023-24 Pg No

a 200 (a) in foundation & Plinth(Item Code 20003B R&B SOR 2023-

b 100.00 Extra for brick work in superstructure above plinth level upto

floor two level (B) Conventional (Item Code 06006B R&B

17 (i) Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:4 (1Cement : 4 -coarse sand ) in foundation

and plinth (B) Conventional.(Item Code 06008A2A R&B SOR

a 100.00 in foundation and plinth(Item Code 06008A2A R&B SOR

b 100.00 Extra for half brick masonry in superstructure above plinth

level upto floor two level. (B) Conventional (Item Code

06008E2A R&B SOR 2023-24 Pg No 73) 40.09 Sq.M.

Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

concrete.(Item Code 05025AA R&B SOR 2023-24 Pg No 57)

18b Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (B) Walls, from

top of foundation level upto floor two level (Item Code

18c Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (.C)

Slabs,landing,shelves,Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level. (Item Code 05025CA R&B

18d Providing and laying controlled cement concrete M.250 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts, upto floor two Level(Item Code

Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base of columns and Mass

concrete (Item Code 05024AA R&B SOR 2023-24 Pg No 56)

19b 50.00 Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (.C)

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and

Cantilever upto floor two level. (Item Code 05024CA R&B

19c 1.00 Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (D) Columns,

Pillars posts and struts upto floor two level. (Item Code

05024DA R&B SOR 2023-24 Pg No 57) 4558.2 Cu.M.

19d Providing and laying controlled cement concrete M.200 and

curing complete excluding the cost of formwork and

reinforcement for reinforced concrete work in (E) Staircases

excluding landing upto floor two leve (Item Code 05024EA

20a 1.00 Providing and laying cement concrete work 1:2:4 (1- Cement

: 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete work in

(A) Foundations, footings, Base or columns and Mass

concrete (Item Code 05011AA R&B SOR 2023-24 Pg No 53)

20b 1 Providing and laying cement concrete work 1:2:4 (1- Cement

: 2- Coarse sand : 4- graded stone aggregates 20 mm

nominal size) and curing complete excluding cost of

formwork and reinforcement for reinforced concrete work in

(B) Slabs, landing, shelves, Balconis , Lintels, Beams,

Girders and Cantilever upto floor two level. (Item Code

05011BA R&B SOR 2023-24 Pg No 53)

10.00 Providing and laying C.C. pavement of mix M-25 with ready

mixed concrete from batching plant. The ready mixed

concrete shall be laid and finished with screed board vibrator

20c , vacuum dewatering process and finally finished by floating,

brooming with wire brush and including panel shuttering etc.

complete as per specifications and directions of Engineer-

incharge.(AMC Approved Rate) 8277.55 Sqmt

5.00 Providing and laying and fixing 25 mm thick expansion joint

by hydrocell semi rigid UV resistance with high performance

20d laminated closed cell polythene foam joint filler in sheet foam

as directed, etc. complete. (Item Code 5049 R&B SOR 2023-

24 Pg No 64) 738.13 Sqmt

21 Providing form work in ordinary timber planking so as to give

a rough finish including centering, shuttering, strutting and

propping etc. height of propping and centering below

supporting floor to celling not exceeding 4 M & removal of the

same for in situ reinforced or plain concrete work in(Item

Code 09001 CH. 9 R&B SOR 2023-24 Pg No 78)

a 130.00 (A) Foundation, footings, bases of columns etc. and mass

concrete. ( Item Code 09001AA PG. NO. 78) 171.68 Smt

b 250.00 (B) Flatsurfacessuchassoffitsof supspened floors slabs

Landings and the like. (1) Floors etc. upto 200 mm in

thickness. ( Item Code 09001B1A PG. NO. 78)

c 150.00 (C)Vertical surface such as walls (any thickness) partitions

and the like including attached buttresses & string course &

the like. ( Item Code 09001CA PG. NO. 78)

(D) Columns, pillars, posts & struts.

d 40.00 (1) Square, rectangular, polygonal in plan ( Item Code 297.68 Smt

e 15.00 (2) Circular or curved in plan. Item Code09001G2A, PG NO.

f 250.00 (H) (1) Sides and soffits of beam, haunchings cantilevers,

girders, bressumers, Coping and lintels not exceeding 1 M in

depth. ( Item Code 09001H1A PG. NO. 79)

g 80.00 (2) Sides and soffits of beam, haunchings cantilevers,

girders, bressumers and lintels exceeding 1 M in depth.

ITEM CODE 09001H2A, Pg. no. 79) 259.88 Smt

h 40.00 (L) chullah hoops, weather sheds, chhajas, carbels etc

including edges. ( Item Code 09001LA PG. NO. 80) 155.78 Smt

i 2.00 (M) Staircase with-sloping or stepped soffits incl. risers &

strings excluding landing. ( Item Code 09001MA PG. NO. 80)

22 Providing T.M.T Fe 500D bar reinforcement for R.C.C. work

including bending, binding and placing in position complete

up to floor two level.(Item Code 05014C R&B SOR 2023-24

a 15000.0 All Floor Level 75.46 Kg.

23 20.00 Providing and laying polished Kota stone slab (Polished /

River Finish, Green colour ) flooring over 20 mm. (average)

thick base of cement mortar 1:6 (1 cement : 6 coarse sand)

or lime mortar 1:1.5 laid over and joined with grey cement

slurry including rubbing and polishing complete.25 mm

th.(Item Code 14012AA R&B SOR 2023-24 Pg No 121) 982.83 Sq.M.

24 50.00 Providing and laying polished Kota stone slab 25 mm. thick in

Platform ,Riser of Stair , Skirting, Tread , dado and pillars laid

on 10 mm. thick cement mortar 1:3 (1 cement : 3 coarse

sand) jointed with grey cement slurry including rubbing and

polishing and MAking groove where it is Required etc. compl

(Item Code 14013A R&B SOR 2023-24 Pg No 121)

25 5.00 Providing and laying white/Colur glazed tiles 6 mm thick in

flooring treads of steps and landing laid on a bed of 12 mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) finished

with flush pointing in white cement. (Item Code14008AA

R&B SOR 2023-24 Pg No 120) 908.17 Sq. M.

25 100.00 Providing and layingWhite / Colour glazed tiles of size

mmx200mm x 8 mm / 300 mmx 450mm x 8 mm in skirting,

risers of steps, Floor and dedo on 10 mm. thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

cement slurry.etc. complete in all respects etc. complete as

direction by E.I.C.(Item Code 14036 R&B SOR 2023-24 Pg

27 1.00 Providing and laying marble stone slab flooring over 20 mm.

(Average) base of cement mortar 1:6 (1 cement: 6 coarse

sand) or L.M. 1:1.5 laid and jointed with grey cement slurry

including rubbing and polishing complete: (A) Marble slab

mm. thick. (Item Code 14011A R&B SOR 2023-24 Pg No

28 150.0 P&L24"x24"vitrified8mmthicktileflooringover 20mm(average)

baseof cementmortar 1:6 (

cement:6coarsesand)onnewsurfaceorfixingon existing

flooring by adhesive material including dismentalingof

existing flooringand jointedwith color cement slurry including

finisedwith flush pointing&cleaning thesurfaceetc. complete

for light shade (Item Code 14022 R&B SOR 2023-24 Pg No

29 200.0 ProvidingandlayingVitrifiedtiles 8to10mmthick , 24'' x24''

inskrtingrisersof stepsanddedoon 10mm thick cement plaster

1:3 (1-cement : 3coarse sand) and jointed with white cement

slurry (Item Code 14009CA R&B SOR 2023-24 Pg No 121)

30 300.0 Grouting the joints of flooring tiles having joints of 3 mm

width, using epoxy grout mix of 0.70 kg of organic coated

filler of desired shade (0.10 kg of hardener and 0.20 kg of

resin per kg), including filling / grouting and finishing

complete as per direction of Engineer-in-charge. Size of Tile

600x600 mm (Approved Rate) 258.65 Sq. M.

31 4.0 Providing and laying Ceramics tiles 6 to 8 mm thick in

flooring, treads of steps, landing and dedo on 12 mm. thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry etc. comple(Item Code 20003B R&B

SOR 2023-24 Pg No 140)te in all respects etc. complete as

direction by E.I.C. (Item Code 14008BA R&B SOR 2023-24

32 200.00 Providing & Laying 18 mm thick Mirror polish granite For

flooring , counter , stair -riser , tread , skirting , dedo , Jambs

etc. machine cut or chiselled on bed of cement mortar 1:1

pointing with neat cement slurry incl. moulding, Making

grooves where it is required etc. comp. as per instruction of

engineer in charge.(Approved Rate)

33 750.00 Provdg.15 to 20 mm. thick Finish / Mala cement plaster in

single coat on fair side of brick / concrete walls for interior

plastering upto floor four level and finished even and smooth

in C.M.1:4.(Approved Rate)

34 50.00 Providing and mixing water proofing materials in cement Per Bag

mortar in proportion recommended by the manufacturer. etc. of 50 Kg

comp. as per instruction of engineer in charge.(Approved of

Rate) 45.78 Cement

35 400.00 Providing 20 mm th. Double coat Sand face / Mala Cement

Plaster on Walls upto floor four level Above Ground level

consisting of 12 mm th. Backing coat of C.M. 1:3 ( 1 cement :

3 Ssand ) & 8 mm th. Finishing coat of C.M. 1:1 ( 1 cement :

1 sand ) ets. Complete. (Item Code 17017 R&B SOR 2023-

36 30.00 White / Color washing with lime on undecorated wall

surfaces (two coats) to give an even shade including

thoroughly brooming the surface to remove all dirt, dust

mortar drops and other foreign matter. (Item Code

37 150.00 Finishing walls with Acrylic Smooth exterior paint of required

shade :New work (Two or more coat applied @ 1.67 ltr/10

sqm over and including priming coat of exterior primer

applied @ 2.20 kg/10 sqm) (Approved Rate)

38 450.00 P./L. METALIC HERITAGE SURFACE TEXTURE

Providing and fixing of HERITAGE textured homogeneous

wall finishing system from BAKELITE HYLAM LTD or

equivalent make consisting of a two component system of

(25 kgs per Pack) made of 92% silica particles coated with

fade resistant pigments, 100% acrylic polymer bonding agent

(5kgs per pack) with the applied thickness of the coating

being between 0.8mm-1.2mm to be applied on acured,

smooth level plaster without keying, as per the

shades/combinations approved, as per the manufacturer

directions, for usages, tobe applied by an approved

applicator of the manufacturer, as per the directions /

supervision of the engineers in charge, all complete. Approve

Rate) 815.90 Sq.M.

39 200.00 Wall Painting (two coats) with plastic emulsion / Oil paint of

approved brand and manufacture and of shade required on

undecorated wall surfaces to give an even shade, over and

including a priming coat with alkali resistance primer of

approved brand and manufacture after thoroughly brushing

the surface free from mortar droppings, and other foreign

matter and also including preparing the surface even and

sand -papered smooth(Item Code 18031 R&B SOR 2023-24

40 350.00 Extra over above item for every subsequent coat of of wall

painting with plastic emulsion / Oil paint of approved brand

(Item Code 18032 R&B SOR 2023-24 Pg No 135) 33.39 Sq.mt.

41 350.00 Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from

mortar dropping and other foreign matter and sand papered

smooth.(Item Code 19032 R&B SOR 2023-24 Pg No 139)

42 Providing & Laying & Jointing glazed stoneware pipes incl.

excavation up to 2.0 mt.,refilling, trasporting the pipe to work

site, unloading, lowering in trenches, laying and jointing the

pipes in c.m. 1:1 incl. all jointing materials such as cement,

sand, hemp, bitumen as dire. testing the pipe line to a head

of 1.5 mt. and hydraulic test as dire incl. watering trenches,

spreading , and carting away of surplus earth within

mt.lead as dire. etc. comp.(Aproved rate)

a 100.00 23 cm dia. 386 Rmt

b 50.00 15 cm dia 183 Rmt

c 20.00 10 cm dia. 134 Rmt

43 10.00 Constructing brick masonry chamber for under ground C.I.

Inspection chamber and bends with bricks having croshing

strength not less than 35 Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Lightduty) 455mm x 610 mm intenal dimensions total

weight of cover with frame to be not less than 38 Kg. (Wt. of

cover 23Kg.) and Wt. of frame 15Kg.) (R.C.C.top slab with

1:2:4 mix (1-cement:2-coarse sand:4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside

plaster 15 mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions 455 mm x 610 mm and up

to 850 mm deep (Item Code 24016AA & 24017A R&B SOR

44 4.00 Constructing Manhole with R.C.C. top slab in 1:2:4mix (1-

cement: 2-coarse sand:4-graded stone aggregate 20 mm

nominal size) foundation concrete 1:3:6 mix (1-cement:3-

coarse sand:6-Brick bats 40+50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement:5-coarse

sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement:2 -Coarse

sand:4-stone aggregate 20 mm nominal size) finished

smooth complete including curing and festing (i) Inside size

900mm x 1200mm and up to 1.5M. deep including C.I. cover

with frame size 560 mm diameter total weight of cover and

frame to be not less than 128kgs. (Wt. of cover 64Kg. and

Wt. of frame 64Kg.) (A) With 230 mm thick walls of brick

masonry using brick having crushing strength not less than

35Kg./Sq.cm. in Cement Mortar 1:5 (1-Cement: 5-Coarse

sand) (2)B type depth up to 1.50 Metre (Item Code 24008B

R&B SOR 2023-24 Pg No 175)

45a 20.00 Providing and fixing C.P. brass bib cock of approved quality

conforming to IS:8931 of Approved make as approved by

engg. in charge all complete. 15 mm Nominal Bore Dia

(Approved Rate) 434.2 No.

45b 60.00 Providing and fixing C.P. brass angle valve of approved

quality conforming to IS:8931 of Approved make as approved

by engg. in charge all complete. 15 mm Nominal Bore Dia

(Approved Rate) 500.35 No.

45c 1.00 Providing and fixing C.P. brass shower rose with 15mm or

20mm inlet Shower Arm.(A) 100mm dia. Each (Item Code

46 15.00 Provdg. & laying S.W. Gully trap with C.I. garting brick

masonry chamber & water tight C.I. cover with frame of

mm x 300 mm size ( inside) with standard weight. sqare

mouth trap size 150 x100 mm P trap (Approved Rate)

47 10000.00 Providing erecting and fixing double coated ISI water tank of

required capacity each with all necessary fittings and

connection etc. complete on terrace(Item Code 22014 R&B

SOR 2023-24 Pg No 158) 3.91 Litre

48 60.00 Extra rate over item of excavation of earth for excavation of

asphalt pavement/RCC of thickness up to 0.20 meter

including demolishing the asphalt carpet, metal, soiling /

cutting Reinforcement etc.comp. with stacking the material as

directed.-up to 0.20 meter thickness(Item Code 20003B R&B

SOR 2023-24 Pg No 140) 80 Sq.M.

49 20.00 P/F PVC / C.I. (span) nahni trap and all of the following

nominal dia of self cleanising design with C.I.Screw down or

hinged greeting inclusive cost of cutting and making good the

walls and floors for drain 75 mm dia. etc. comp. (Aproved

rate) 368.55 No.

50 a 50.00 Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. (Item Code

50b 60.00 Providing laying and jointing in true line and level 25mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. (Item Code

50c Providing laying and jointing in true line and level 32mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.(Item Code

50d Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials(Item Code

50e Providing laying and jointing in true line and level 50mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials (Item Code

51 Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good

the wall, ceiling and floor etc. complete(Item Code 23055 TO

52 Provdg. And fixing to wall ,ceiling and floor 10.00 kg.

F/Sq.Cm2 working pressure polythelene pipes of the

following outside diameter, low, density, complete with

special flange compression type fittings, wall clips etc.

making good wall ceiling and floor.(Item Code 23004F/G

R&B SOR 2023-24 Pg No 164)

a 75.00 (A) 75mm dia 274.68 Rmt

53 6.00 Providing and fixing water closet squatting Pan (Indian type

W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste

and trap to be measured and paid for separately) (A) Vitreous

China.(I) Long pattern = White colour (Item Code 23009 R&B

54 6.00 Providing and fixing 100mm size P or S trap for water closet

squatting pan including jointing the trap with the pan and soil

pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A)

Vitreous China.(Item Code 23011 R&B SOR 2023-24 Pg No

55 6.00 Providing and fixing in Cement Mortar 1:3 (1Cement: 3-

coarse sand)a, pair of white vitreous China 250mm x 130mm

x 30mm footrest to long pattern squatting pan water

closet.(Item Code 23012 R&B SOR 2023-24 Pg No 165)

56 6.00 Providing and fixing white vitreous china extended wall

mounting water closet of size 780x370x690 mm of approved

shape including providing & fixing white vitreous china cistern

with dual flush fitting, of flushing capacity 3 litre/ 6 litre

(adjustable to 4 litre/ 8 litres), including seat cover, and

cistern fittings, nuts, bolts and gasket etc complete. (Aproved

rate) 13036.55 No.

57 Providing and fixing chromium plated brass half trun flush

cock of approved quality including fixing in pipe line etc.

complete. (Aproved rate)

58 24.00 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible

tube upto 1 metre long with S.S. triangular plate to

Eureopean type W.C. of quality and make as approved by

Engineer - in - charge.,(Aproved rate) 299.35 No.

59 1.00 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen

sink as per IS:13983 with C.I. brackets and stainless steel

plug 40 mm, including painting of fittings and brackets,

cutting and making good the walls wherever required

:Kitchen sink without drain board 610x460 mm bowl depth

200 mm (Aproved rate) 3337.85 No.

60 30.00 Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

pattern, including painting of fittings and brackets, cutting and

making good the walls wherever require:White Vitreous

China Wash basin size 550x400 mm with a pair of 15 mm

C.P. brass pillar taps (Aproved rate)

61 24.00 Provdg. & fixing 600mm x 450 mm Bevelled edge mirror of

superior glass mounted of .6 mm th. A.C. sheet or plywood

sheet and fixed to wooden pluge with C.P. brass screws and

washers(Item Code 23024 R&B SOR 2023-24 Pg No 166)

62 10.00 Providing and fixing mirror of superior glass (of approved

quality) and of required shape and size with plastic moulded

frame of approved make and shade with 6 mm thick hard

board backing : Rectangular shape 1500x450 mm (Aproved

rate) 1817.2 No.

63 10.00 Providing and fixing PTMT liquid soap container 109 mm

wide, 125 mm high and 112 mm distance from wall of

standard shape with bracket of the same materials with snap

fittings of approved quality and colour, weighing not less than

105 gms.(Aproved rate) 146.3 No.

64 10.00 Providing and fixing toilet paper holder.(A) C.P. Brass (Item

Code 23026/8 R&B SOR 2023-24 Pg No 167) 414.53 No.

65 10.00 Provdg. & fixing C.P..Brass towal rail complete with C.P.

brass brackets fixed to wooden plugs with C.P. Brass

screws.(600 mmx 20 mm size) (Item Code 23025 R&B SOR

66 Providing and fixing ball valve (brass) of approved quality,

High or low pressure, with plastic floats complete :(Item Code

23030A/B/C R&B SOR 2023-24 Pg No 167)

67 Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end) : (Item Code 23031 R&B

SOR 2023-24 Pg No 167)

68 30.00 Provdg. & fixing C.P.brass pillar tap capstan head, screw

down high pressure with screws shanks and back nuts. (A)

15 mm dia (Item Code 23029A R&B SOR 2023-24 Pg No

69 200.00 Providing and laying broken chine mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be

laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending

them upto 15 cm along the wall,clearing with water and oxalic

acid etc. as directed.(Item Code 14035 R&B SOR 2023-24

70 200.00 Providing and applying fibre reinforced elastomeric liquid

water proofing membrane with resilient acrylic polymers

having Sun Reflectivity Index (SRI) of 105 on top of concrete

roof in three coats @10.76 litre/ 10 sqm. One coat of self-

priming of elastomeric waterproofing liquid (dilution with

water in the ratio of 3:1) and two coats of undiluted

elastomeric waterproofing liquid (dry film thickness of

complete application/system not less than 500 microns). The

operation shall be carried out after scrapping and properly

cleaning the surface to remove loose particles with wire

brushes, complete in all respect as per the direction of

Engineer-in-Charge.( Aproved rate) 474.15 Sq. M.

71 200.00 Providing and laying Cement concrete flooring for I.P.S. 1:2:4

(for Indian Patent Stones) (1 cement: 2 coarse sand:

graded stone aggregate 20 mm. nominal size) lain in layer

finished with a floating coat of net cement- 50 mm th by

addition of waterproof chemical etc. complete.( Aproved rate)

72 1500.00 Providing and fixing M.S.grill, gate,stair / balcony railing

elevation element of required pattern in frames of windows

etc. with M.S. flats, square or round bars etc. including

priming coat with approved steel primer all complete. (

73 50.00 Applying priming coat over new steel and other metel surface

after and including preparing the surface by throughly

cleaning, oil, grease, dirt and other foreign matter and

scoured with brushes fine steel wood, scrapers and sand

paper with ready mixed priming paint brushing red lead.(Item

Code 19001 R&B SOR 2023-24 Pg No 136)

74 200.00 Painting two coats (excluding priming coat) on new steel and

other metal surface with enamel paint, brushing, interior to

give an even shade including cleaning the surface an even

shade including cleaning the surface of all dirt, dust and

other foreign matter.(Item Code 19002 R&B SOR 2023-24

Pg No 136) 86.94 Sqmt

75 200.00 Providing and fixing stainless steel ( Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel

nuts and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel

bolts etc., of required size, on the top of the floor or the side

of waist slab with suitable arrangement as per approval of

Engineer-incharge, (for payment purpose only weight of

stainless steel members shall be considered Including fixing

accessories such as nuts, bolts, fasteners etc.).(Aproved

76 50.0 Providing and fixing in position collapsible steel shutters with

vertical channels 20x10x2 mm braced with flat iron diagonals

20x5 mm size with top & bottom rails of T-iron 40x40x6 mm

with 38 mm dia. Steel pulleys complete with bolts , nuts

locking arrangement , stoppers , handles including applying a

priming coat of red lead paint & two coats of enamel paint of

selected shade & approved make.(Item Code 11003A R&B

77 1.00 Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses.(1) 0.80 mm thick sheet..(Item Code

15001A R&B SOR 2023-24 Pg No 125)

78 1.00 Providing valleys 900 mm. overall in plain 1.6 mm. thick G.I.

sheet Class – 3 fixed with ‘J’ or ‘L’ hook bolts and nuts

galvanized from ‘J’ or ‘L’ hook bolts and bitumen washers

complete.(Item Code 15003A R&B SOR 2023-24 Pg No 125)

79 10.00 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two track

member size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

Kg/mt, vertical member of size 61.85 mm x 31.75mm x

mm @ wt.of 0.659 Kg/mt with sliding shutters of horizontal

member size 40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt,

vertical member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for window.(Item

Code 11028 R&B SOR 2023-24 Pg No 108)

80 30.00 roviding and fixing standared extruded of alluminium section

of size 63mm x 38.10mm x 1.2mm @ Wt. 0.643 Kg/mt with

colour anodized alluminium frame for ventilation with 5 mm

thick frosted glass as details etc complete for Ventilation(Item

Code11030 R&B SOR 2023-24 Pg No 108)

81 6.00 Providing and fixing standared extruded of

alluminiumsectionofsize63.50x38.10x1.95mm @Wt 1.094Kg

/ Rmt with colour anodized alluminium framewith 5mm thick

transparent bronze colour tinted float glass with colour

anodizedalluminiumframe for ventilationwith5 mm thick

frosted glass as details etc complete for.window.(Item Code

Providing and fixing ISI marked 35 mm thick flush door

shutters conforming to IS : 2202 (Part I) decorative type, core

of block board construction with frame of 1st class hard wood

and well matched teak 3 ply veneering with vertical grains or

cross bands and face veneers on both faces of shutters with

1.00 mm thick Decorative Laminated Sheet on both faces of

shutters including ISI marked Stainless Steel butt hinges,

bright /matt finished 125 mm Stainless Steel handles of

approved quality & make, ISI marked oxidised M.S. door

latches of Size 300x20x6 mm conforming to IS:5930 with

necessary screws etc. complete as per direction of Engg.

incharge. (Approved Rate)

a 50.00 Flush shutter with both side laminate 4238.5 Sq.M.

83 Providing and fixing 35 mm th. Shutters for doors windows

& clearstory windows incl. wood frames as specified 12 cm.

x 7cm. size incl. anodised alluminium fixtures and fastenings

including primer coat of approved quality and two coats of oil

paint etc. complete. (Item Code 10032A/B/C R&B SOR 2023-

a 1.00 Fully glazed 4788.50 Sq. M.

b 1.00 Fully panelled 5478.89 Sq. M.

c 1.00 Partly panelled and partly glazed 5133.69 Sq. M.

84 12.00 Providing and fixing FRP frame size 125x65 mm and 35mm

thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame is to be filed

up with injected polyurethene foam done in situ alongwith

embedded wooden pieces for stiffening & also taking hinges

& fintures. The whole FRP frame & shutter is to be water

proof weather proof, termite proof & resistance to mild

acid/alkali. Rates are to be inclusive of S.S hinges with

fastener sleeve & alluminium fixtures & fastenings. (Item

Code 10036 R&B SOR 2023-24 Pg No 90)

Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls,

floors with cement concrete 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size)

cement plastered on both sides with cement mortar 1:3 (1

cement : 3 coarse sand), finished with a floating coat of neat

cement and making necessary channels for the drain etc.

complete (Approved Rate)

85 6.00 For Pipe 100 mm to 250 mm diameter 683.70 No.

86 6.00 For Pipe 250 mm to 300 mm diameter 785.90 No.

87 10.00 For pipes 350 to 450 mm diameter 1134.65 No.

88 Making connection of G.I. distribution branch with G.I. main

of following sizes by providing and fixing tee, including cutting

and threading the pipe etc. complete : (Item Code

R&B SOR 2023-24 Pg No 163)

a 6.00 25 to 40 mm nominal bore 757.10 No.

b 6.00 50 to 80 mm nominal bore 600.08 No.

89 1000.00 Providing throating or plaster drip, grooves and moulding to

Wall , R.C.C. chajja and slab.(Approved Rate) 27.5 Rmt

90 150.00 Cementvata10cm.x10cm.sizequarterroundincement mortar

1:1 (1 cement : 1 sand including neat cement finishing) (Item

Code 15 R&B SOR 2023-24 Pg No 186) 2.55 Rmt

91 200.00 Carring out plinth treat ment to post construction/ existing

structure by spraying chemical solution for termite control

treatment including labour and material consist ment withI.S.I

specification. Using Chlordene and Chiorpur files 20EC. As

Per 6131_ paret- II Consentration Weight one percent is

recommended i.e one litre 20EC chemical emulsion with19

liter give1% concrentration inclusive of one litre chemical

emulsion appication at the rate of 5 Litre chemical/ Sqm of

surface is recommended as per I.S (Item Code 22007A R&B

SOR 2023-24 Pg No 157)

92 60.00 Carrying out wall treatment for termite control

includingsprayingwithchemicalsolutioninoilbase including

labourandmaterialUsingChlorpyriphos 20ECAsper

IS6313part- II (1%concentrationby mass) is recommended i.e

one litre chemical emulsion diluted with 19 liter oil base. Total

solution will be 20 liters inclusive of one liter

chemicalemulsionapplicationattherateof7.5litre chemical

/Sqmofsurfaceisrecommendedasper I.S..(Item Code

R&B SOR 2023-24 Pg No 157)

93 200.00 Providing and fixing pre-cast Rubber Dye / steel Dye

interlocking concrete block 60 mm thick with grade of

concrete M300 pnumatic compressed / vibrated mechanically

and as per approved design Confirming to IS 15658:2006

including 35 mm Sand layer for levelling and filling the joint

with sand in proper line and level as per guidline sof IRC : SP

632018 etc. Complete.(Item Code 14033 R&B SOR 2023-24

94 50.00 Supplying and fixing of 300 mm-L x 150 mm-B x

mm-H Kerb block for Footpath in M-20 grade using

mm nominal size black trap aggregate of Sevaliya/Timba

or equivalent quality for pre-cast blocks, reasonably

exposed finish/ formwork , mould with well equipped

with vibratory system for kerb stones of approved

design including curing, etc. complete, including the

cost of formwork etc. complete. The rate shall also

include necessary cutting of asphalt, fixing the Kerb

stones in line and level on 5 cm thick sand bedding with

necessary equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints of the

kerbstones. Filling of zari alone the sides of the kerb

stone fixed with Bituminous concrete Bituminous

concrete / C.C. mixed in proper position to flush with

the road surface as directed by Engineer in change to

form a portable mixture. a) Laying on 5 cm thick Sand

Bedding (Approved Rate) 350.89 R.mt.

95 30.00 Designing, fabricating, testing, installing and fixing in position

Curtain Wall with Aluminium Composite Panel Cladding, with

open grooves for linear as well as curvilinear portions of the

building , for all heights and all levels etc. including:

(Approved Rate) 4474.2 Sq.mt.

(a) Structural analysis & design and preparation of shop

drawings for pressure equalisation or rain screen principle as

required, proper drainage of water to make it watertight

including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of

aluminium composite panel cladding in pan shape in metalic

colour of approved shades made out of 4mm thick aluminium

composite panel material consisting of 3mm thick FR grade

mineral core sandwiched between two Aluminium sheets

(each 0.5mm thick). The aluminium composite panel cladding

sheet shall be coil coated, with Kynar 500 based PVDF /

Lumiflon based fluoropolymer resin coating of approved

colour andshade on face # 1 and polymer (Service) coating

on face # 2 as specified using stainless steel screws, nuts,

bolts, washers, cleats, weather silicone sealant, backer rods

(c) The fastening brackets of Aluminium alloy 6005 T5 / MS

with Hot Dip Galvanised with serrations and serrated

washers to arrest the wind load movement, fasteners, SS

316 Pins and anchor bolts of approved make in SS

Nylon separators to prevent bi-metallic contacts all complete

required to perform as per specification and drawing The

item includes cost of all material & labour component, the

cost of all mock ups at site, cost of all samples of the

individual components for testing in an approved laboratory,

field tests on the assembled working curtain wall with

aluminium composite panel cladding, cleaning and protection

of the curtain wall with aluminium composite panel cladding

till the handing over of the building for occupation. Base

frame work cost for ACP cladding is included in this item rate.

The Contractor shall provide curtain wall with aluminium

composite panel cladding, having all the performance

characteristics all complete , as per the Architectural

drawings, as per item description, as specified, as per the

approved shop drawings and as directed by the Engineer-in-

Charge. However, for the purpose of payment, only the

actual area on the external face of the curtain wall with

Aluminum Composite Panel Cladding (including width of

groove) shall be measured in sqm. up to two decimal places.

96 Providing and Fixing Box type metal letters forming

composite box made from 1mm thick stainless steel plate of

grade 304 having brush finish of following font size to be

fixed at Main Gate in english and or Gujrati and including

fixing charges. etc. complete as per direction of Engg.

incharge. for Payment Purpose Height of Letter will be

a 2160.00 Upto 300 mm Height (Approved Rate) 110.74 R.Inch

97 10.00 Providing and Fixing MURAL made out of 2mm thick s.s.

plate grade 304, including making necessary design as per

Architect dwg. Through laser cutting including connection to

the R.C.C./Masonary with necessary frame,anchor

fastnuts,M.S.Plate etc. complete as per direction of Engg.

incharge. (Approved Rate) 8028.8 Sq.mt.

98 1500.00 Providing and Fixing Sinage - internal and external signage

boards with Vinyle Text on ACP sheet / 2 mm th. S.S. Plate

etc. complete as per direction of Engg. incharge. (Approved

Rate) 11.07 Sq.mt.

Electrical Work

S.N. Qty Items Unit Total Amount in Rs

S.N. Qty Items Unit Total Amount in Rs

1.0 INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multi strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch / bell push &

1 accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose

/ H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for secondary light point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires, in below type of

pipe to be erected complete with earth continuity and necessary

connection with primary light with accessories erected on Metal /

PVC / wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic sheet for open / concealed wiring. with necessary Lamp

holder / ceiling rose / H.D.Connector as directed.

Note:- Maximum up to 6 mtrs length, excess will be considered

as Mains for Secondary Point.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires up to 10 mtr length, in below type of pipe

4 erected complete with Modular type switch & 5 pin Plug erected on

PVC / Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire

from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Point wiring for on board Looped Plug with 6A Modular type switch

& 5 pin socket erected on PVC / Metallic/Wooden box, single

5 100 mounting base frame covered with textured / metallic/white front 255.00 Pt

plate modules erected on / in wall / ceiling with following type

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected

6 with necessary PVC fittings & Junction boxes fixed with adhesive

solution & Clamps with following dia of pipes, in approved manner

Providing & erecting PVC Corrugated Flexible Conduit with

7 required nos. of coupling, PVC bushes, Check-nuts etc. complete of

following sizes.

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

8 unarmoured copper cable 1.1 KV grade to be

erected as directed of following size.

8.1 150 (B) 2 core 4 sq.mm 130.00 Mtr.

8.2 350 (C) 2 core 6 Sq. mm 202.00 Mtr.

8.3 250 (F) 3 core 4 Sq. mm 187.00 Mtr.

8.4 300 (G) 3 core 6 Sq. mm 290.00 Mtr.

Providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on wall/ceiling,

with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following

(A) with medium class Rigid PVC pipe and accessories

9.1 650 (a) 2 wire 1.5 sq. mm 62.00 Mtr

9.2 600 (b) 2 wire 2.5 sq. mm 82.00 Mtr

9.3 100 (f) 4 wire 2.5 sq. mm 125.00 Mtr

providing and erecting Mains with 1.1 KV grade FRLS PVC

insulated ISI marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories

900 (a) 2 wire 4 sq. mm 111.00 Mtr

2.0 MCBDBs & MCBs

providing and erecting Miniature circuit breaker single pole 6A

to 25A suitable to operate on 240 V A.C. system and having

breaking capacity 10 KA to be erected in existing box. confirming to

IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for motor &

12 inductive load (C Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following capacity

Sheets steel powder coated enclosure suitable for incorporating

One/Two nos. MCB.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with busbar,

neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC

61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The

DBs should be used of same company of MCB to be used) suitable

(A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43)

providing and erecting Approved make ELCBs / RCCBs

conforming to IS: 12640 and having sensitivity of 30 mA and Short

Circuit withstand capacity of 10 KA and suitable for operation on

single phase 240 V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed

25 (ii) 40Amps. DP 2213.00 E.a.

Follow IS code :3043 is the guideline for the earthing

Providing and erecting required size HOT deep Galvanised iron

16 250 strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, 77.00 KG

Motors etc. using proper clamp.

17 150 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 787.00 KG

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic

value surrounded by highly conductive compound with high charge

19 dissipation suitable for following type of applications with chamber

and heavy duty cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 / meter testing as per IEC

62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing compound should

be capable to retain moisture for long time Necessary test report

must be submitted.

(b)For Electrical installation up to 11 KV in normal soil.

15 Length of Pipe : 2.00 mtrs 5703.00 E.a.

Back filling Compound :1 no. Bag of 25 Kg.

Light Fixtures & Fans

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used

as a heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%, CCT 3000 K to

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Tube Light with integral driver

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet

(A) Square/ Circular shaped Surface/Recessed Mount Downlight

with provision for spring loaded mounting clips complete.IP20

20.2.1 60 (i) 5-9 watts,Surge-2 KV 218.00 No

20.2.2 30 (ii) 11-15 watts, Surge-2 KV 423.00 No

20.2.3 25 (I) Mirror Light 9 Watts, wall mounted minimum 1 feet long 309.00 No

Providing & erecting Approved make Ceiling Fan with double ball

bearing with Condenser 230 volt A.C.50 Hz. 900 mm sweep

complete having 3 Aluminium blades, canopy erected complete. [

Make shall be approved by Engineer in Charge]

Providing & erecting Approved make Power Saving 50 Watt

Ceiling Fan with double ball bearing ISI mark with Condenser

22 10 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades 1929.00 No

with aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Supplying & erecting approved make low noise decorative exhaust

23 30 fan having size 200mm with 1350 RPM with square frame ABS 1687.00 No

body with inbuilt lowers & square frame.

Supplying & erecting fan hook box of 10 mm M.S. round bar

bounded to the RCC bars up to 50mm length each side and pierced

through a 16 Gauge M.S. box / Heavy Duty PVC box complete

erected concealed in Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook

Supplying and erecting 19 / 20 mm. nominal bore Medium Class

26.0 10 M.S. Pipe down rod erected duly painted for fan complete with 107.00 Mtr

proper insulation without leakage and earthing.

EXTERNAL LIGHTING

Supply , Installation, testing and commissioning of pre-wired, LED

fitting /post top luminaries etc of all typesof external lights, complete

with all accessories and tube etc. directly on pole / pole bracket

including connection with 1.5 / 2.5 sq. mm FRLS PVC insulated,3

core flexible, copper conductor, with flexible conduits and coupler

and earthing etc. as required.

Supplying and erecting LED street light / Flood light fittings with

High power White LEDs wattage of 1Watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and

27 Polycarbonate optics/ lenses with company mark/name engraved or

embossed 120 to 300 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

100 lumens/watt . LED driver efficiency > 85 %.CREE / OSRAM /

PHILIPS Lumileds / NICHIA / SEOUL/ BridgeLux (U.S.A.) make

LED used for luminaire. ( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) Flood Light (IP-65), Surge -4KV,Light must have 440VAC

line supply protection. It should withstand 48 hours for 440VAC

20 (iv) above 90 to 120 watts 6501.00 No

Providing & laying approved make Double walled corrugated

pipes (DWC) of polyethylene(conforming to IS 14930 II )with

28.00 necessary connecting accessories of same material at required

depth in existing trench for laying of cable. below ground / road

surface for enclosing cable

525 (A)50 mm outer dia 62.00 Mtr

Supplying & erecting approved make Automatic liquid level

controller 6A. with sensor testing as per instruction of Engineer in

charge on site complete with wiring connection with existing wires

with copper conductor from pump to upper and lower tank.

Supplying and erecting Flexible PVC insulated multistrand

30.0 multicore 1.1 kv grade ISI marked copper wires of following size to

be erected as directed.

750 e) 1.50 Sq.mm 3 core round PVC sheathed 45.00 Mtr

Providing & erecting water cooler having storage capacity 150 Ltr.

& cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C.

The outlet temp. of the water should drop by 15˚C within a hour,

The water cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank surrounded by

evaporating, coil, thermostats, relay etc.complete with necessary

inlet & outlet connection. The body of water cooler will be made

from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame, prefilter housing

with 'O' ring presediment filter GAC filter, carbon filter suitable

32 6 buster DC pump capacity 80 psi, mention with 40 psi inline type 15466.00 No

post carbon filter auto low & high pressure switches with following

size of storage tank & LPH capacity & erected as directed with one

year comprehensive maintenance guarantee.

[B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank

Providing & erecting open well horizontal mono block pump set

33.0 with cast iron body, complete for three phase submersible motor

(B) 1 H.P. single phase open well motor pump set suitable for

10 LPM discharge @ 25 mtr. head, suitable for 32 mm dia. Delivery 9518.00 No

pipe with control panel.

SUB - TOTAL OF MISC.

FIRE EXTINGUISHER

1 6 Supplying & erecting D.C.P. type fire extinguisher for following 2000 No

capacity cartridge type with gun metal cap 150 gram CO2 gas

cartridge, powder and brackets confirming to IS 2171 1985 and

complete erected with necessary clamps made from 50 x 6 mm M S

Flat with nuts and bolts grouted in wall complete. [A] For 5 Kg

2 10 Supplying & erecting carbon dioxide (CO2) fire extinguisher user of 7700 No

following capacity with necessary clamps made from 50 x 6 mm

M.S. Flat with nut & bolts grouted in wall complete. [A] For 4.5 Kg

3 20 Supplying & erecting ABC powder type 'Ceasefire' type Fire 990 No

extinguisher as per IS 13849 or 1 Kg capacity with necessary clamp

for erection on wall

SUB TOTAL of FIRE EXTINGUISHER