Renewal of existing BT road from Malaimadaipatty Village road junction (600m Length x 6m Width) towards Housing Colony at TNPL Unit II

PROVIDING AND LAYING TACK COAT OVER EXISTING BT SURFACES USING 2 KG OF BITUMEN EMULSION (RS1) PER 10 SQM AFTER THOROUGH CLEANING THE EXISTING SURFACE FOR PREPARATORY TO ANOTHER BITUMINOUS CONSTRUCTION OVER IT INCLUDING COST OF MATERIALS, LABOUR CHARGES, RENTALS OF MACHINERY, FUEL AND ALL OTHER INCIDENTAL CHARGES ETC., COMPLETE AS DIRECTED BY ENGINEER INCHARGE.

PROVIDING AND LAYING BITUMINOUS CONCRETE TO 30MM COMPACTED THICKNESS USING 0.13CUM OF 19.00-9.50MM, 0.17CUM OF 9.50- 2.36MM AND 0.26CUM OF 2.36 AND BELOW WITH 50.30KGS OF VG40 BITUMEN FOR PREMIXING PER 10SQM INCLUDING COST AND CONVEYANCE OF ALL MATERIALS TO CMP SITE, HEATING THE BITUMEN AND AGGREGATE TO REQUIRED TEMPERATURE AND MIXING THEM IN REQUIRED TEMPERATURE IN CENTRAL HOT MIX PLANT20- 30 TON CAPACITY, CONVEYING THE MIX BY TIPPER TRUCKS TO PAVER SITE, SPREADING THE MIX TO UNIFORM THICKNESS OF 40MM WITH MECHANICAL PAVER TO THE SPECIFIED GRADES AND CROSS SECTIONS AND CONSOLIDATED BY 8-10 TONE VIBRATORY ROLLER TO THE REQUIRED DENSITY ETC., INCLUDING LABOUR FOR ATTENDING TOP OVER TO SITE ETC., INCLUDING HIRE CHARGE SAND FUEL CHARGES FOR 20- 30T CMP WITH BITUMEN BOILER, TIPPER TRUCKS, PAVER FINISHER, VIBRATORY ROLLER AND ALL OTHER TOOLS AND PLANT REQUIRED, INCLUDING FUEL AND ALL OTHER INCIDENTAL CHARGES ETC., COMPLETE AS PER SPECIFICATION USING CMP AS DIRECTED BY ENGINEER INCHARGE.

PROVIDING AND LAYING OF HOT APPLIED THERMOPLASTIC COMPOUND 2.5MM THICK INCLUDING REFELECTORISING GLASS BEADS @250 GMS PER SQM AREA, THICKNESS OF 2.5MM IS EXCLUSIVE OF SURFACE APPLIED GLASS BEADS AS PER IRC 35. THE FINISHED SURFACE TO BE LEVEL, UNIFORM AND FREE FROM STREAKS AND HOLES ETC., COMPLETE AS PER MORT&H SPECIFICATION NO.803 AS DIRECTED BY ENGINEER IN CHARGE.

PREPARE THE ROAD SIDE BERM SURFACE (BOTH SIDES) AND DO EARTH CUTTING / FILLING TO LEVEL FOR A WIDTH OF 1.5 MTR AND ROLLING WITH 10 MT ROAD ROLLER.