Construction of control Room building for 1x10 MVA Receiving Station at Zawoora (Zewan )

Amount

A. Civil Work

Earthwork in excavation by manual means in trenches for foundations, drains,pipes,cables etc. ( not exceeding 1.5m in width ) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5m , including getting out excavated earth and disposal of surplus excavated earth as directed (All kinds of soil).

Providing & laying of stone soling in level in foundations etc. (as per the directions of site incharge Engineer)

Providing & laying in position cement conc. of specified grade including curing but excluding the Cost of centering & shuttering. All work upto plinth level with : b) 1:4:8 (1 cement :4 coarse sand :8 graded stone agg. 40 mm nominal size

Providing & laying in position cement conc. of specified grade including curing but excluding the Cost of centering & shuttering. All work upto plinth level with : a) 1:2:4 (1 cement :2 coarse sand :4 graded stone agg.) 40 mm nominal size

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth & string courses, fillets, columns, pillars, piers, abutments, posts & struts upto five level including curing but excluding the cost of centering , shuttering , finishing and reinforcement with 1:1½:3 (1 cement :1½coarse sand :3 graded stone agg. 20 mm nominal size

Reinforcement for RCC work incld. straightening, cutting, bending, placing in position and binding all complete including cost of reinforced TMT steel and binding wire.

Centering & shuttering incld. strutting, propping etc. & removal of form work . Form work/centering and shuttering of steel plates not less than 3.00mm thick M.S sheets of specified size/ply sheets stiffened with suitable structural frame work true to plane prop. height upto desired height in foundations, footings, bases for columns etc.

Centering & shuttering incld. strutting, propping etc. & removal of form work . Form work/centering and shuttering of steel plates not less than 3.00mm thick M.S sheets of specified size/ply sheets stiffened with suitable structural frame work true to plane prop. height upto desired height in lintel beams, all types of suspended floors, soffits of beam ribs, stepped, spiral stair cases etc upto desired height and thickness complete

Brick work with common burnt clay (non modular) bricks of class designation 7.5 in foundation and plinth inluding curing in cement mortar 1:6 (1 cement : 6 coarse sand) Including extra for brick work with common burnt clay bricks/ cement concrete bricks in superstructure above plinth level upto floor five level.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with holdfast lugs or with dash fasteners of required dia and length ( hold fast lugs and dash fasteners shall be paid for separately):-First class deodar wood.

Providing and fixing of glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. (Ist class Kail Wood)

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows, and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). panelling for panelled or panelled and glazed shutters 25mm to 40mm thick:-first class kail wood.

Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S presseed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge:- First class kail wood.

Providing and laying of Ceramic glazed floor tiles 300x300mm (thickness to be specified by the manufacturers) of Ist quality conforming of IS:15622 of approved make, laid on 20mm thick bed of cement mortar 1:4 (1 cement:4 coarse sand) including pointing the joints with White cement and matching pigment etc complete. in colour such as White, Ivory, Grey, Fume Red brown

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

15 mm thick cement plaster on the rough side of single or half brick wall of mix:1:6 (1: cement :6 fine sand)

12 mm thick cement plaster finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand).

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing 75mm wide Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete (Cornice Work)

Cement conc. flooring 1:2:4(1 cement :2 coarse sand :4 graded stone agg.) finished with a floating coat of neat cement incld. cement slurry & curing complete but excluding the cost of nosing of steps etc. complete, 50 mm thick with 20 mm nominal size, stone agg.

Finishing walls with water proofing cement paint of required shade on new work. (two or more coats applied @ 3.84 Kg/10 Sqm)

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture for doors & windows

Providing and fixing water closet squatting pan (indian type W.C. pan ) with 100mm sand cast iron P or trap, 10 liter low level white P.V.C flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS : 7231 with all fittings and fixitures complete including cutting and making good the walls and floors where ever required- white viterous china Orrisa pattern W.C. pan size 580x440mm with integral type foot rests

Providing and fixing wash basin with C.I brackets, 15mm C.P brass pillar taps, 32mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls where ever required. White Vitreous China Wash Basin size 630mmx450mm with a pair of 15mm C.P brass pillar taps

Providing and fixing white viterous china pedestal for wash basin cpmpletely recessed at the back for the reception of pipes and fittings.

Providing and fixing stainless steel grating on waste water pipe fitted on suitable frame including all carriages upto site of work complete job.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete flexible pipe 40mm dia

Providing and fixing PVC flexible type soil, waste and vent pipes for disposal system from Bathroom & Kitchen upto septic tank & soakage pit with all necessary accessories(complete job)

Construction of brick masonary manhole in cement mortar 1:4(1 cement : 4coarse sand) RCC top slab with 1:2:4 foundation concrete 1:4:8 inside plastering 12mm thick in cement mortar 1:3 Mix Size of manhole 90x80x 45 cm inside

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge: Internal work concealed with clamps at 1.00 meter spacing including cutting the chases and making good the wall etc. 1216 (16mm OD) pipe

Providing and fixing Polyethylene- Aluminum- Polyethylene (PE-ALPE) Composite Pressure Pipes conforming to IS: 15450, U.V. stabilized with carbon black having thermal stability for hot and cold water supply, capable to withstand temperature upto 80ºC, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. Elbows, tees, reducers, couplers and connectors etc. This includes testing of joints complete as per direction of the Engineer-in-charge: External work including trenching and refilling etc complete 1620 (20mm OD) pipe

Providing and fixing salem stainless steel KITCHEN SINK ISI :304(18/8) as per IS: 13983 with CP brackets & stainless plug 40 mm including painting of all necessary accessories & making good the wall where ever required ( size 510x1040x225mm)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ( 1000 litre capacity) ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing pipe specials 15 mm dia reputed make (RESP, Jaquar, Parko, NIKE or equivalent make) ISI mark including all carriages upto site of work (complete job).

CP bib cock

CP bib cock long nose

CP angle valve

gate/ball /stop valve

Wall Mixer

Sink Mixer

Providing and fixing toilet paper holder CP brass

Providing and fixing towel rail CP brass

Providing and fixing soap case CP brass

Providing and fixing water heater reputed make (Venus, Racold or equivalent make) ISI mark including all necessary fittings including making good the wall after installation in all respects. 50 litre capacity

Dry random rubble masonary with hard stone in foundation and plinth with bond stone

Structural steel work in built up sections, trusses/ purlins and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Welded)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete Cable trench top angle and cable racks(L65x65x6mm/50x50x6/100x50x6 channel iron)

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required

Supply & Fixing of 300 mm in width Eaves Boarding of 0.50 mm thick coloured GI Sheets incl. cost of J or L hooks or 8mm nuts & bolts (complete)

Providing CGI sheet coloured for ridges,hips and valleys fixed with polymer coated J or L hooks, bolts and nuts 8mm dia with bitumen & G.I limplet washers complete (0.50mm thick 600mm wide)

Providing & Fixing Stainless Steel Fittings for doors & Windows comprising of handles,tower bolts,stays, hinges,Al drops with locks etc. complete job

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Providing, boring and fixing of bore well with submersible pump 3 hP including laboratory testing of water complete job (300Ft Deep)

Carriage of all materials required for construction of Control Room from various sources upto site of work both mechanical as well as head load if any

B. Electric Work

Supply and Fixing of multistranded flexible copper wire 1 mm of any reputed make as per relevant IS

Supply and Fixing of multistranded flexible copper wire 1.5 mm of any reputed make as per relevant IS

Supply and Fixing of multistranded flexible copper wire 2.5 mm of any reputed make as per relevant IS

Supply and Fixing of multistranded flexible copper wire 4 mm of any reputed make as per relevant IS

Supply and Fixing of multistranded flexible copper wire 16 mm of any reputed make as per relevant IS

Supply and Fixing of MCB Box 16 Way of any reputed make as per relevant IS

Supply and Fixing of MCB 63 Amp 2-pole of any reputed make as per relevant IS

Supply and Fixing of MCB 40 Amp of any reputed make as per relevant IS

Supply and Fixing of MCB 32 Amp of any reputed make as per relevant IS

Supply and Fixing of MCB 25 Amp of any reputed make as per relevant IS

Supply and Fixing of MCB 10 Ampof any reputed make as per relevant IS

Supply and Fixing of Switches of any reputed make as per relevant IS

Supply and Fixing of3 Pin Switches of any reputed make as per relevant IS

Supply and Fixing of Fan Dimmer of any reputed make as per relevant IS

Supply and Fixing of 16 Amp Socket of any reputed make as per relevant IS

Supply and Fixing of 16 Amp Switches of any reputed make as per relevant IS

Supply and Fixing of Conceal Light LED 15 Watt of any reputed make as per relevant IS

Supply and Fixing of Angle Holder of any reputed make as per relevant IS

Supply and Fixing of LED bulb 15 Watt of any reputed make as per relevant IS

Supply and Fixing of Roundplate 8'' of any reputed make as per relevant IS

Supply and Fixing of Blanker of any reputed make as per relevant IS

Supply and Fixing of Panel Indicator of any reputed make as per relevant IS

Supply and Fixing of Plate 16 Modular of any reputed make as per relevant IS

Supply and Fixing of Plate 12 Modular of any reputed make as per relevant IS

Supply and Fixing of Plate 06 Modular of any reputed make as per relevant IS

Supply and Fixing of Plate 04 Modular of any reputed make as per relevant IS

Supply and Fixing of Royal Plug of any reputed make as per relevant IS

Supply and Fixing of Steel Screw 1'' of any reputed make as per relevant IS

Supply and Fixing of Exhaust Fan 12'' of any reputed make as per relevant IS

Supply and Fixing of Ceiling Fan 48'' of any reputed make as per relevant IS

Supply and Fixing of Steel Routing Wire of any reputed make as per relevant IS

Supply and Fixing of Tape Roll of any reputed make as per relevant IS

Supply and Fixing of Ceiling Rose of any reputed make as per relevant IS

Supply and Fixing of Bulk Head of any reputed make as per relevant IS

Providing and laying electric conduit and gi boxes for slab of any reputed make as per relevant IS

Supply and Fixing of PVC Pipe of any reputed make as per relevant IS

Supply and Fixing of PVC Bend of any reputed make as per relevant IS

Supply and Fixing of Gang Box of any reputed make as per relevant IS

Supply and Fixing of GI Box of any reputed make as per relevant IS

Matta Construction Company

F M INFRASTRUCTURE BUILDERS PRIVATE LIMITED

IMTIYAZ AHMAD FAFOO

GHULAM RASOOL BATKALOO