REPAIRS REPLACEMENT OF INTERNAL WIRING FOR MES INSTALLATIONS AND VARIOUS SUB STATIONS INCLUDING ALLIED WORKS UNDER GE UTILITY AMBALA CANTT

Amount

Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators, switch socket outlet, bulk head fittings, tube light fittings, calling bell etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed.

Material and labour for Point wiring with 2 Run of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor drawn through and including medium grade, ISI marked, PVC conduit medium grade not less than 20 mm dia with accessories, concealed/surface type on wall/ceiling and including provision of 1.50 Sqmm single core PVC insulated, unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including sunken pressed steel terminal boxes (modular type, size/modules as required at site) with and including screws, modular cover plate over sunken box for housing the modular switches, socket outlets & fan regulators etc and making good the disturbed surfaces as per existing for:- One light point/bell/fan point controlled by one switch Note:-1. Modular metal flush/sunken Box, and for modular switch/socket cover plate & sheet are inclusive in the item rate quoted. 2. Switch, socket and fan regulators to be measured and paid separately.

All as per Item No. 02 here-in-before but One 3 pin socket point 5 Amps on independent board

All as per Item No. 02 here-in-before but One 3 pin socket point 5 Amps on same board

All as per srl item No 2 here-in-before but for one socket point 15 Amp with 2.5 sq mm PVC unsheathed FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.5 sq mm green colour FRLS-H, 1100 volt grade ISI marked copper wire as earth continuity conductor connected to common earth dolly complete all as specified & as directed.

All as per srl item No 2 here-in-before but for one socket point 15 Amp/AC box with 4 sq mm PVC unsheathed FRLS-H, 1100 volt grade ISI marked, multi stranded copper conductor along with 4 sq mm green colour FRLS-H, 1100 volt grade ISI marked copper wire as earth continuity conductor connected to common earth dolly complete all as specified & as directed.

S&F modular switch 6 Amp 1 way 1 module 230 volts complete all as specified & directed.

S&F switch modular 16 Amp 1 way 1 module 230 volts complete all as specified & directed.

S&F socket modular 2/3 pin 5 Amp 2 module 230 volts complete all as specified & directed.

S&F socket modular 2/3 pin 6/16 Amp 2 module 230 volts complete all as specified & directed.

S&F of electronic Fan regulator modular 100 watt 2 module complete all as specified & directed.

S&F modular bell push 6 Amp 1 way 1 module 230 volts complete all as specified & directed.

S & F Calling bell ding dong type SP AC supply, 230 volts complete all as specified & directed.

Supply and fix ceiling rose surface type 2/3 terminal complete all as specified and directed.

Supply and fix lamp holder, insulated body, with back plate for angular batten fittings complete all as specified and directed.

S&F switch 6 Amp 1 way 230 volts complete all as specified & directed.

S&F switch 16 Amp 1 way 230 volts complete all as specified & directed.

S&F socket 2/3 pin 5 Amp 230 volts complete all as specified & directed.

S&F socket 2/3 pin 6/16 Amp 230 volts complete all as specified & directed.

S&F of electronic Fan regulator 100 watt complete all as specified & directed.

S&F bell push 6 Amp 1 way 230 volts complete all as specified & directed.

S&F LED lamp 9 watt threaded/pin end, warm/cool lamp type as per site requirement suitable for fixing on existing batten/angular holders complete all as specified and directed.

S&F LED lamp 12 watt threaded/pin end, warm/cool lamp type as per site requirement suitable for fixing on existing batten/angular holders complete all as specified and directed.

Supply and fixing Lumiline Plus LED batten tube light fitting 20 watt, 4 feet long, wall mounted box type, opal diffuser, high efficient aluminum housing body, high efficient, AC 220-240 volts, 50 Hz and including 20 W LED tube rod (luminaries) environment friendly, high efficient, T8 with aluminium extrusion heat sink connecting with copper conductor flexible cable from ceiling rose to connector of the light, Make Havells cat part No LUMILINE+BS20WLED865SPCSS or equivalent of make mentioned in Appendix 'B' complete all as specified and directed by the Engineer-in-Charge.

Supply and fixing Lumiline Plus LED batten fitting 10-12 watt, 2 feet, aluminium body including driver, tube rod cool/warm type industrial model complete connecting with copper conductor flexible cable from ceiling rose to connector of the light. Make Havells cat part No LUMILINE+BS10WLED865SPCSS or equivalent of make mentioned in Appendix 'B' complete all as specified and directed.

Supply and fixing LED surface mounted bulk head luminaries 8-10 W with min 800 lumen, industrial model, IP 65, Aluminum housing, surge protection including driver & LED etc complete with all accessories connecting with copper conductor flexible cable from ceiling rose to connector of the light. Make Havells cat part No HEXAFT10WLED857SSYMBOPC or equivalent of make mentioned in Appendix 'B' complete all as specified and directed.

Supply and fixing decorative wall light, stainless steel , rust free fixture with white glass diffuser suitable for 7.5/9 watt LED filament lamp E27 base , model No FLORETTE WL recess mounting LED 15/18 Watt circular down lighter/Spot LS E27 GLD, 240 volt, 50HZ, AC supply complete with all accessories internally pre wired including connecting with 3 core flexible copper conductor from ceiling rose to connector of the light. Make Havells cat part No LHFOAID1TZ1I040 or equivalent of make mentioned in Appendix 'B' complete all as specified and directed.

S&F LED Bldg Security Light Fittings Endura sundown type of capacity 40 -45 watt made up of die cast aluminium housing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including service bracket of GI pipe 32 mm bore medium grade of length 0.9 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fitting to GI pipe as required at site and making electrical connection. Make Havells cat part No ENDURASUNDOWNSL45WLED765PASYBOPC or equivalent of make mentioned in Appendix 'B' complete all as specified and directed.

Supply & fixing LED Flood light Luminaries 150 Watts consisting of suitable number of LEDs and mounted on MCPCB high pressure die cast aluminium housing with sealed toughened glass cover, IP 66 protection suitable for mast light mounting, 5700K, LED efficiency >130 lm/Watt with PC lens and system efficiency 110 lm/W , 240 Volts AC, 50 Hz, CRI>70% operating voltage range 160 V-270 V, Power factor> 0.95, working temperature range -10ºC to 50ºC,built in surge protection of more than 10 kV , Confirm the tests from auth labs : LM79 & LM 80, incl proper fixing and testing of flood lights on 9/11 mtr long steel tubular pole and provide facility of power supply shall be provide as suitable for maint work of light fittings incl make proper connection of new and existing light fittings complete with cutting , welding , drilling holes, nut bolts, washer including connecting with flexible copper conductor to connector of the light with necessary fixing arrangements. Make Havells cat part No JETAIRISFL150WLED757ARNBLTG or equivalent of make mentioned in Appendix 'B' complete all as directed by Engineer-in-Charge.

Supply and fixing Venus neo LED flat panel 2' x 2' size surface/ recess mounted (grid/ gypsum type) 36-40 watt , warm/cool white with provision of PVC flexible copper conductor cable to light fitting. Make Havells cat part No VENUSNEO2X2PLR36WLED865ST or equivalent of make mentioned in Appendix 'B' complete all as specified and directed.

S & F UFO LED Bollard 8-10 W, IP-65 luminaire made of pressure die-cast aluminium housing, 240 volt, 50HZ, AC supply , complete with all accessories internally pre wired including connecting with flexible copper conductor from Electric Supply Source to connector of the light. Make Havells cat part No UFOBLS10WLED830PSYMTOPCN or equivalent of make mentioned in Appendix 'B' including PCC 1:3:6 of size 400x400x400 mm complete all as specified and directed.

S & F LED post top luminaire 30-35W IP-65 made of pressure die-cast aluminium housing & clear glass 240 volt, 50HZ, AC supply complete with all accessories internally pre wired including connecting with fitting and including fitting & provision of 3 core PVC flexible copper conductor from Electric Supply Source to connector of the light. Make Havells cat part No CORALPT35WLED757PSYMTOPC or equivalent of make mentioned in Appendix 'B' complete all as specified and directed.

S&F single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB. 20 Amp including removing old Unserviceable enclosure complete all as specified and directed.

Supply and fix sheet metal MCB DBs 4 way with 200 Amps rated bus bar single pole and neutral, IP-43, double door fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth disturbed surface after removing old Unserviceable MCB DB complete all as specified and directed.

Supply and fix sheet metal MCB DBs 8 way with 200 Amps rated bus bar single pole and neutral IP-43, doubel door fixed on wall duly grouted in solid block wall or on wooden board, including copper lugs/thimbles duly crimped for connection, including making smooth disturbed surface after removing old Unserviceable MCB DB complete all as specified and directed.

Supply and fix sheet metal enclosure Vertical triple pole & neutral(VTPN) with MCCB TPN 125 Amp for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door duly grouted in solid block wall or on wooden board in and including lugs/thimbles duly crimped for connection including making smooth the disturbed surface complete all as specified and directed.

Supply and fix MCB SP 6-32 Amps, 240 volt,10 KA 'C' curve including removing old Unserviceable MCB complete all as specified and directed.

Supply and fix MCB SPN 32/40 Amps, 240 volt,10 KA 'C' curve including removing old Unserviceable MCB complete all as specified and directed.

S&F sub main wiring with two run of 6 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volt grade ISI marked multi stranded copper conductor with one run of 6 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI marked multi stranded copper conductor connected to common earth dolly including capping & casing or concealed on wall/ceiling in PVC conduit medium grade not less than 25 mm dia ISI marked of adequate size for housing the wires complete all as specified including taking out of old U/s sub main wiring of any size . Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB (ii) For the purpose of payment two runs of 6 sqmm conductors and one run of 6 sqmm conductor with conduit shall be measured as one length.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 6 sq mm cable with PVC insulated, multi stranded aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable complete all as specified and directed.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty 2 core, 10 sq mm cable with PVC insulated, multi stranded aluminium conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection, including disconnecting and taking down old U/S existing cable complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable 10 sqmm 4 core with multi stranded aluminium conductor, 1100 volts grade, including disconnecting and taking down old U/S existing cable complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable 16 sqmm 4 core with multi stranded aluminium conductor, 1100 volts grade, including disconnecting and taking down old U/S existing cable complete all as specified and directed.

Supply and laying XLPE insulated, armoured heavy duty electric cable 25 sqmm 3.5 core with multi stranded aluminium conductor, 1100 volts grade, including disconnecting and taking down old U/S existing cable complete all as specified and directed.

S&F light grade GI Tubing of size 40 mm dia for cable protection and fixed with clamp to pole and wall with nut bolts, including disconnecting and taking down existing pipe and removing complete all as specified and directed by the Engineer-in-Charge.

Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine including HDPE pipe of 50mm to 150 mm dia suitable for 0.4 mpa working pressure complete all as directed.

Excavation in trenches not exceeding 1.5 meter wide and not exceeding 1.5 meter deep and getting out in any type of soil complete all as specified and directed by the Engr-in-Charge.

Returning, Filling in excavated soils including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M & L dry sand cushioning to cable 8 cm before laying cable in trenches and 15 cm after laying the cable and compacting, complete all as specified and directed.

Supply and laying well burnt bricks Sub Class-B laid flat to cover the cable width equal to the length of cable and abutting each other for protection of cables all as specified and directed.

Material and labour cement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in coping of pole and strut, stay around the pole, hard standing etc complete including necessary form work all as specified and directed.

Material and labour for earthing complete with galvanised earth plate electrode 600mm x 600mmx 6.00mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 25x4 mm GI strip earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire protected by galvanized steel pipe 40mm bore (light grade) and connected to main switch or main control board all as shown in electrical plate No.3 of SSR Part-I & including necessary excavation and earth work. The rate also include charcoal & salt in alternate layers, 20mm bore GI pipe (light grade) for watering and 40mm bore GI protection pipe, funnel, wire mesh, cast iron cover and frame etc, complete, all as specified or indicated and as directed including testing on completion including dismantling and taking down old earthing complete all as specified and directed. Note : The quoted rate shall include the cost of earth work, GI pipe for watering, GI protection pipe, funnel, wire mesh, RCC cover, RCC cover shall be 50mm thick in PCC 1:2:4 type B-1 using 8mm TMT bars @10cm c/c both way.

Earthing and material & labour earthing complete with galvanized steel earth electrode plate of size 60x60x6mm thick buried directly in ground/earth pit not less than 2.25 mtr deep below normal ground level and top edge of earth electrode not less than 1.5 mtr below normal ground level and connected with GI earth wire of size 4 mm by means of nut, bolts, washers etc to eqpt/machinery all as shown in electric plate No 3 of SSR Pt I including PCC (1:3:6) pit, pit cover 50mm thick RCC 1:2:4 type B-1 using 8mm tor steel bars @10cm C/C both ways, 20 mm bore medium grade GI protection pipe, watering pipe 20mm bore medium grade, funnel, wire mesh, also including earth work, common salt, charcoal dust including dismantling and taking down complete all as specified and directed by Engineer-in-Charge.

S&F LED 22 watt integrated batten with inbuilt lithium ion battery with minimum 4 hour back up including removing of unservicable light fitting complete all as specified and as directed by the Engineer-in-Charge.

S&F LED lamp Invertor technology 9 watt with 4 hour power back up with efficiency more than 100 lumen per watt,Lithium ion battery including removing of unservicable lamp complete all as specified and as directed by the Engineer-in-Charge.

Refixing only existing serviceable LED light fittings of any description after cleaning complete all as directed.

Taking down carefully unserviceable exhaust fans/ceiling fans of any size from its position, dismanteling blades, opening the fan motor, removing the burnt grease, applying new bearing grease, removing of defective parts such as ball bearing, bush bearing, burnt winding, shaft, split pin, condensor, condensor holder, shackle, reassembling after replacement of defective parts including replacements of 3 core, 0.75sqmm (24/0.2mm) flexible copper cable from ceiling rose to connector, hanging on its position properly all as specified and directed. Note:- Defective parts like ball bearing, bush bearing and motor rewinding, shaft, condensor, rubber shackle will be measured and paid separately.

S&F in replacement of ball /bush bearing suitable for exhaust fan of same size as that of existing defective one (ISI Marked) all as specified and directed. Make: SKF/TATA/Universal/polar

S&F in replacement of condenser capacity 4/3.15/2 MFD all as specified and directed. Make: Usha/Universal/ Keltran

Cleaning and preparing the surfaces of exhaust fans/ceiling fana any size, removing the grease, carbon dust over the fans and painting with one coat of synthetic enamel paint of approved colour with brush painting and writing MES number on the fan all as specified and directed.

M&L rewinding exhaust fans/ceiling fans with super enamelled bare copper conductor with the same size and number of turns as that of the old one, insulating, varnishing and pre heating for exhaust fan 280 to 450 mm sweep and ceiling fans 1200/1400 mm sweep all as specified and directed.

S&F in replecement of blade suitable for exhaust fan 280/300/450mm, size as that of existing defective one all as specified and directed. (ISI Marked)

S&F in replecement of blade suitable for ceiling fans 1200/1400mm, size as that of existing defective one all as specified and directed. (ISI Marked)

Taking down/dismantling of defective/rusted storage type hot water Geyser of 50/35/25 litre capacity from different locations by disconnecting inlet/outlet connections and taking out unserviceable parts by unscrewing bolts and nuts, descaling/cleaning inner shell, servicing etc. checking defects, re-assembling and re-installing the Geyser in position, connecting and testing all as specified & directed

S&F PVC flexible pipes 15mm dia (heavy duty) both end socketed with washer 450/600 mm long for hot/cold water (ISI marked) all as specified & directed.

Supply and fix in replacement of stop valve fancy type cast copper alloy screwed down high pressure with crutch or butter fly handle, chromium plated screwed both ends of size 15 mm bore, for geyser connection all as specified and directed.

S&F in replacement of thermal Auto cut of range 0-90 degree centigrade (ISI marked) complete all as specified and directed.

S&F in replacement of gyser heating element 1.5/2 KW (ISI marked) round type/thread/triangle base type with the provision of thermal cut out all as specified and directed.

S&F in replacement of inner tank 6/9 holes suitable for Gyser 25/35/50 litres capacity (Apparatus assembly) made copper duly prewired. Make: Usha/Havells/Lexus/Crompton

S&F in replacement of Gyser assembly 6/9 holes suitable for 25/35/50 litres gyser capacity (ISI Marked) complete all as specified and directed

Supply and installing, testing & commissioning in replacement of factory fabricated outdoor type feeder pillar board of size 700X600X500 mm , outer shell made out of 3.15 mm thick CRCA sheet and inner shell made out of 2 mm thick CRCA sheet and MS angle section 50x50x6 mm mounted on PCC 1:2:4 type B-1 platform 60 cm above and 45 cm below the ground level, frame factory fabricated with front openable double door system and cable alloy (Each door hinged with body at 3 places with body and hinges should be welded with body and door) lockable/open able with arrangement of pad locking on door 01 no of pad lock of three keys shall be used to make the outer shell completely vermin proof suitable for 3 phase 4 wire 415 Volt, 50 Hz, tested at factory approved from CPRI factory fabricated having modern fabrication and testing process followed by powder coated painting after 7-tank pre treatement control & power wiring with suitable size of copper conductor along with suitable gasket to make it dust/vermin proof and general construction confirming to IS:61439/2011 Part-1 and part -2 type test certificate with not less than IP-56 and breaking capacity 65 KA comprising of the following :- (a) MCCB 125 Amps TPN, 25 KA -01 No (b) Aluminium busbar of capacity 200 Amps with colour coated heat shrinkable sleeve and suitable hole for out going connection - Set of four. (c) Misc items like screws, cable tie, copper cable 1.5/2.5 Sqmm, cabe lugs, sleeves, glands etc complete are included in quoted rates.

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radiusbuilt in CM 1:6 complete all as specified and directed.

M&L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finishing the surface fair and even without using extra cement all as specified directed.

M&L preparation and applying three coats of white wash on new plastered surface of wall complete all as specified and directed.

S&F in replacement of metal flush mounting box with cover plate 1-3 module for day to day complaint including all accessories and making good the disturbed surfaces as per existing complete all as specified & directed.

S&F in replacement of metal flush mounting box with cover plate 4-8 module for day to day complaint including all accessories and making good the disturbed surfaces as per existing complete all as specified & directed.

S&F in replacement of metal flush mounting box with bakalit sheet of suitable existing size for day to day complaint including all accessories and making good the disturbed surfaces as per existing complete all as specified & directed.

S&F modular switch 6 Amp 1 way 1 module 230 volts for day to day complaint including disconnecting and taking down existing old U/S complete all as specified & directed.

S&F switch modular 16 Amp 1 way 1 module 230 volts for day to day complaint including disconnecting and taking down existing old U/S complete all as specified & directed.

S&F socket modular 2/3 pin 5 Amp 2 module 230 volts for day to day complaint including disconnecting and taking down existing old U/S complete all as specified & directed.

S&F socket modular 2/3 pin 6/16 Amp 2 module 230 volts for day to day complaint including disconnecting and taking down existing old U/S complete all as specified & directed.

S&F switch 6 Amp 1 way 230 volts for day to day complaint including disconnecting and taking down existing old U/S complete all as specified & directed.

S&F switch 16 Amp 1 way 230 volts for day to day complaint including disconnecting and taking down existing old U/S complete all as specified & directed.

S&F socket 2/3 pin 5 Amp 230 volts for day to day complaint including disconnecting and taking down existing old U/S complete all as specified & directed.

S&F socket 2/3 pin 6/16 Amp 230 volts for day to day complaint including disconnecting and taking down existing old U/S complete all as specified & directed.

S & F in replacement of SSC 15 Amp including PVC gang box and fixing screw ISI marked.

S&F in replacement of SSC 5 Amp including PVC gang box and fixing screw ISI marked.

M&L in replacement of 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked all as specified and directed.

M&L in replacement of 2.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked all as specified and directed.

Supply and fixing of LED pendant/hanging office type table decorative lights with LED Bulb 8-12 Watt made of die-cast aluminum having & clear glass 240 Volt 50 HZ, AC supply complete with all accessories internally pre-wired including connection with copper conductor flexible heavy duty insulation tension type from connecting ceiling rose to fittings complete all as specified and directed by Engineer-in-Charge.

Note:- Amount of credit of Rs. 77255.00 for retrieved materials is mentioned in Schedule of Credit attached in tender documents in pdf form which will be deducted offline while acceptance of tender.

M/S Sonu Traders

JS CONSTRUCTION COMPANY

kapil enterprises

BAL SINGH & SONS