Building Work

SR to Rest House Bilimora,Dist.:-Navsari (Repairs to Providing Ground Floor's slab in

Fabrication work,First Floor Ceiling work and False Ceiling)

BILL OF QUANTITIES

Percentage Rate Tender

Item Description of Item Quantity Unit Rate In Amount

1 Providing and fixing wooden planks ceiling with 108.75 Sqmt 1833.38

tounged and grooved jointing and wood screws

(frame work and cover fillings to be measured and

laid for separately) (A) Indian Teak wood (iii) 25mm

2 Steel work, welded in built up sections framed work 142.81 Qt 9108.48

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint. (A)In

beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross

beams. Hip and jack rafters, purlins conneted to

common rafters and

3 The provision and installation of a Cement 318.01 Sqmt 1111.00

Sheet(90% Area) + veneer(10% Area)-based false

ceiling involve using 1220 x 2440 x 6mm thick

Cement Sheet (M1) combined with 4mm thick veneer

sheets (M23). The framing can be either a teak wood

frame with cross runners tongued and grooved or a

50x50mm GI section frame, featuring vertical

support and horizontal grid at 450mm c/c spacing,

anchored securely to the RCC ceiling. Joints must be

treated to ensure they are not easily visible, meeting

the satisfaction of the Architect. Finishing involves

applying a Matt Melamine Polish (M29), with

additional paint or patterns as required by the

design. Necessary hardware includes SDST screws

for fixing the sheets onto the framing, PVC wall plugs,

and pipe clamps for hanging the framework, along

with all essential fixtures and fasteners (M14). Rates

encompass the provision of necessary cutouts for

fittings such as lights, speakers, or AC outlets, and

cover installation at various heights and levels on

both ceiling and walls, inclusive of all associated

hardware. Completion must adhere strictly to

provided drawings or instructions from the Architect

and Engineer-in-Charge, with reference to the False

Ceiling Detail Drawings.

4 Providing corrugated G.I. sheet of class-3 roofing 249.60 Sqmt 734.19

fixed with glavanished iron J or L Hooks, Bolts and

nuts 8mm diameter with bitumen and G.I. limpet

washer or G.I. limpet washer. filled with white lead

complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in

Item Description of Item Quantity Unit Rate In Amount

figures and words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

In words In words

The Contractor shall exhibit a board with detailed specification and details of work as directed by the

1 Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.:

PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C.

4 items where there is a change as per actual mix design the cost of difference of cement consumption

have been deducted from the rate of original item at the rate of input rate i.e. 6176/- per mt.

mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

Navsari ( R & B ) Sub Division Navsari ( R & B ) Division

Navsari Navsari