SR to E-1 type revenue quarter Ta. Valsad Dist. Valsad (Shed work and other misc. Works)

Name of work :-

SR to E-1 type revenue quarter Ta.Valsad Dist.Valsad ( Shed work and other misce.works)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Steel work, welded in built up sections framed work including cutting, 7292.00 Kg 90.48

hoisting, fixing in position and applying a priming coat of read lead paint

& two coat oil paint. (A)In beams and joists, channels angles Tees, flats,

with connecting plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters and the like.

2 Providing and fixing of Ridge flashing for roof panel shall be made out of 190.00 Sqm 858.67

0.5 mm thick pre coated GI sheet . The Precoated sheet shall be of

minimum 240 mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per IS:277:1992 , 5-7 microns

epoxy primer on both side of the sheet and polyester top coat 15-18

micron. The PPGI Sheet shall have plastic protective guard film of

minimum 25 microns to avoid scratches during transportation. The ridge

shall be fixed to the steel members by pop rivet or self drilling/self

stitching fastners @ maximum 450 mm c/c along length of

capping/flashing etc complete.

3 Finishing wall with weather proof exterior emulsion paint on wall surface 2742.00 Sqm 114.53

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

4 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) 57.00 Sqm 1397.83

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised

with flush pointing & cleaning the surface etc. complete for antiskit

5 Removing dry or oil bound distemper by a washing and scraping and sand 2168.00 Sqm 11.30

papering the wall surface smooth including necessary repairs to scratches

6 Applying two coats of putty & two coats of primer of approved brand and 517.00 Sqm 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

7 Wall painting (two coats) with plastic emulsion paint of approved brand 517.00 Sqm 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

8 Providing & laying Synroof Hi Build 1mm thick ecetrometric, premium 190.00 Sqm 579.74

quality acrylic coating as a water proofing membrane finished which

consists a coat of bitumat primer & 80 CSM membrane on terrace with

ultra violet resistance working upto any height with 5 years guarantee

against any leakage etc. complete per detail specification & as directed by

Engineer-in-charge.

9 Wall painting (two coats) with plastic emulsion paint of approved brand 548.00 Sqm 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

10 6 KG ABC FIRE EXTINGUISHERS REFILLING OF 10.00 Nos 1262.50

VALVE,NOZAL,POWDER/GAS/WATER, STICKER,SAFTY HOOK TIE CABLE

AND COMPLETE ACCESSORIES WITH SUPPLY AND INSTALLATION

11 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe 30.00 Rmt. 148.12

( SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings

etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

12 Removing, Repairing and Refixing Old existing wooden door shutter 14.00 Nos 1324.11

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer inRepairing

13 Removing, charge etcand

Refixing existing Alluminium window frame with 15.00 Nos 875.67

glass of all size shutter/frame, replacing all old Mosquite Net fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the window,

all materials, transport cost, taxes etc.and as directed by engineer in

charge etc complete.

14 Removing, Repairing and Refixing existing Alluminium fix ventilation 18.00 Nos 348.45

frame with glass of all size shutter/frame, replacing all old fixtures with

new locks, screws etc. including repairing the shutter/frame with Rates

includes all labour charges for removing, repairing & refixing the

Ventilation, all materials, transport cost, taxes etc.and as directed by

engineer in charge etc complete.

15 Provoding and fixing flush door shutters, solid core construction with 31.00 Sqm 1797.77

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core anodised

alluminium butt hinges in flush door shutters (2) 35 mm thick.

16 20mm thick sand faced cement plaster on walls upto height 10 metres 165 Nos 300.66

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

Rupees Sixteen Lakh Twenty One Thousand Thirty Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the estimated

rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1621030.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with detailed

specification and details of work and amount Involved at site without any payment as directed by Engineer-In-Charge.

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor under

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work under all

condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government Resolution

T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the work order.

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by Executive

Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to Tender.

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other Construction works

walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated 9/12/2005 notification Of Labour

& Employment department dt.03/01/2005 & Labou & Employment Department Letter no GWA/2004-841M(B) Dt 14/12/2005 &

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of Cement

Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and drainage &

water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his risk and cost.

11 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender Document

of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division