REPAIR / MAINTENANCE OF INTERNAL ELECTRIFICATION OF TECHNICAL BUILDING AT 57 ASP AND 17 TETTRA SCHOOL AT AF STN BARODA

Amount

Taking down carefully copper / Aluminium point wiring including (light, fan, socket or power complete fittings, such as switches, ceiling roses, pendant holders, Batten holders, shades conical fan regulators, light or power sockets etc) removing materials from site and making good disturbed surfaces of walls roofs etc complete all as specified and directed

Material and labour for point wiring for one light point or one fan point controlled by one switch with using 1.5 Sq mm (nominal area) stranded copper conductor single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduit (medium grade) of 20mm dia all as specified and directed with using new sunken type pressed steel box with including modular cover plate for mounting modular switch socket etc incl all accessories and using 1.5 Sq mm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. Note : (i) The quoted rates shall be deemed to be inclusive for cutting chases in brick walls/pillars etc for concealing the depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the portion of point wiring at RCC columns/ Beems/ Cielings shall be in surface conduit of suitable size fixed on surface plugs and provision of covering sunken boards/terminal boxes/junction boxes of any shape and size with 3 mm thick with suitable GI screws and cup washers. (ii) Fittings like switches sockets regulators, lamp holders light fittings shall be measured and paid for seperatly of Sch’A’. (iii) The size of conduits shall be determined on permissible No of runs of wires as specified in SSR part I (2010) However minimum size of conduits shall be 20 mm dia (medium grade).

One light point controlled by one one/way switch.

One Fan point controlled by one one/way switch complete all as specified and directed

One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size complete all as specified and directed

One bell point controlled by one way switches complete all as specified and directed

One light point controlled by two way switches complete all as specified and directed

All as per item No. 2 above but using 2.5 Sqmm PVC insulated, unsheathed cable for one 3 pin socket outlet 15 Amps on independent board complete all as specified and directed

S/F switch piano Modular type single pole one way 6 Amp 240 Volts complete all as specified and directed

S/F switch piano Modular type single pole one way 16 Amp 240 Volts complete all as specified and directed

S/F switch piano Modular type single pole two way 6 Amp 240 Volts complete all as specified and directed

S/F socket only 6 Amps 2 in 1 Socket with Shutter Modular type 240 Volt complete all as specified and directed

S/F socket only 6/16 Amps Twin Socket Modular type 240 Volt. complete all as specified and directed

S/F Bell push switch Modular type single pole one way 10 Amp 240 Volts complete all as specified and directed

S/F Fan Regulator 1/2M FSC Modular type 240 Volts complete all as specified and directed

M&L for point wiring for one light or one fan point controlled by one switch with using 1.5 Sq mm (nominal area) stranded copper conductor single core PVC insulated & unsheathed cable 1100 volts grade in and incl PVC casing and capping of suitable size fixed on surface all as directed with using new sunken type pressed steel box/terminal boxes for mounting fittings/junction boxes not less than 1.6 mm thick duly painted with two coats of black bituminous paint over a coat of red oxide primer with and incl all accessories and using 1.5 Sq mm (nominal area) stranded copper conductor single core conductor PVC insulated & unsheathed cable as in earth wire connected to commen earth dolly complete all as specified and directed. Note : (i) The quoted rates shall be deemed to be inclusive for fixing the conduits to surface with using PVC of covering sunken boards /terminal boxes/junction boxes of any shape and size with 3 mm thick suitable GI screws and cup washers. (ii) Fititngs like switches, sockets, regulators lamp holders light fittings shall be measured and paid appropriate item of schedule ‘A’ (iii) The size of conduits shall be determined on permissible No of runs of wires as specified in SSR part- I however minimum size of conduit shall be 20 mm dia (medium grade)

One light point controlled by one one/way switch complete all as specified and directed

One Fan point controlled by one one/way switch complete all as specified and directed

One 3 pin 5 Amps socket outlet on same board with other switch complete all as specified and directed

One 3 pin 5 Amps socket outlet on independent board with cable of 1.5 sqmm size complete all as specified and directed

One light point controlled by two way switches complete all as specified and directed

One bell point controlled by one way switches complete all as specified and directed

All as per item No.4 above but wiring with 2.5 sqmm multistranded copper conductor unsheathed and 1.5 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board complete all as specified and directed

S&F for piano switch flush type 5 Amps single pole, one way, 230 volts AC circuit complete all as specified & directed.

S&F for piano switch Swich piano, bell push, 6 Amps, flush type, 230/250 Volts, 50 Hz supply complete all as specified and directed

S&F for piano switch flush type 15 Amps single pole, one way 230 volts AC circuit complete all as specified and directed.

S&F for socket out let 2 in 1, 3 pin 5 Amps flush type, 230 volts Ac circuit complete all as specified and directed.

S&F for socket out let 2 in 1 multipurpose three pin, 15 Amps & three pin 5 Amps controlled by one switch, flush type 230 volts AC circuit complete all as specified & directed.

S&F Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed

S&F Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and directed

S&F for ceiling rose PVC polycarbonate isolated body 63.5x20 mm three terminal complete all as specified and directed.

S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

M & L in repair for sub main wiring using two single core 6 Sqmm fire retardant PVC insulated and unsheathed cable with copper conductor 1100 volts grade ISI marked drawing in and including PVC Casing Caping/PVC Conduit or in existing concealed conduit(as required & directed by Engr-in-Charge)accessories like bends, tee, etc fix on wall and ceiling and connecting to earth dolly and including 4 Sqmm earth wire, PVC insulated & unsheathed all as directed. Note: (i) Two runs of 6 sqmm and one run of 4 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .

All as above item No 22 but using 4 Sqmm cable for phase and neutral and 2.5 Sqmm for earth complete all as specified and directed Note: (i) Two runs of 4 sqmm and one run of 2.5 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .

All as above item No.22 but using two run single core 1.5 Sqmm cable for phase and neutral and 1.5 Sqmm single core PVC insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: (i) Two runs of 1.5 sqmm and one run of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .

All as above item No 22 but using two run single core 2.5 Sqmm cable for phase and neutral and 1.5 Sqmm single core PVC ZHFR insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete all as directed. Note: (i) Two runs of 2.5 sqmm and one run of 1.5 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted .

Taking out existing U/S hylem sheet cover plate including switches and replace the same with new plastic laminated sheet including providing housing for switch socket as per site requirement complete all as specified and directed

Taking out old sunken box and any type S/F in repair Concealed Galvanised (GI) metal flush Boxes Modular 3 module concealed and making good the disturbed surface by white cement & Existing colour of OBD distamper complete all as specified and directed

Taking out old sunken box and any type S/F in repair Concealed Galvanised (GI) metal flush Boxes Modular 4 module concealed and making good the disturbed surfaceby white cement & Existing colour of OBD distamper complete all as specified and directed

Taking out old sunken box and any type S/F in repair Concealed Galvanised (GI) metal flush Boxes Modular 6 module concealed and making good the disturbed surfaceby white cement & Existing colour of OBD distamper complete all as specified and directed

S/F in repair white cover plates with frame (white) Modular type 2 way complete all as specified and directed

S/F in repair white cover plates with frame (white) Modular type 3 way complete all as specified and directed

S/F in repair white cover plates with frame (white) Modular type 4 way complete all as specified and directed

S/F in repair white cover plates with frame (white) Modular type 6 way complete all as specified and directed

S/F in repair white cover plates with frame (white) Modular type 8 way complete all as specified and directed

S&F in repair door bell ding dong, multi tune, Chime and Buzzer. complete all as specified and directed

M & L in repair for flame proof point wiring with FRLS copper conductor cables in stove enemmeld steel conduit with steel accessories, joint boxes/ terminal boxes 60mm deep and continuous earthing and earthing connections,for One light point or one fan point controlled by one flamproof switch with PVC insulated FRLS single core sheathed multistrand copper conducter cables 2 x 1.5 sq.mm size including1x 1.5 sqmm PVC insulated multi dtranded copper conducter earth wire complete all as specified and directed

S & F in reapir LED light fitting 1x30 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable sizeand including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and directed

S & F in repair Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specifed and directed

S & F sheet metal enclosure SP with two pin and socket with one single pole MCB 25 Amps ,'B Curve 240 Volts complete all as specified and directed .

Supply and fixing LED batten 10 Watt (Mirror Light) 2 Feet with polycarbonate housing and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the same complete all as per specified and directed.

supply and fixing LED batten 20 Watt with polycarbonate housing and diffuser AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable from ceiling rose to connector of the light, fixing the same complete all as per specified and directed.

S&F Linear LED T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver suitable for LED T8 lamps , complete with all accessories internally pre-wired and including connecting to ceiling rose with three core flexible copper conductor cable of size 1Sqmm complete all as specified and directed.

S&F in repairs Linear LED T/L rode T8 tubular lamp of 20 watt with extruded aluminium body,PC diffuser and inbuilt driver including taking out existing U/S T/L complete all as specified and directed

Supply and fixing in replacement LED light fitting recess mounted/pendent mounting ultraslim LED flat panel 2x2 down light aluminium extruded housing with full opal diffuser IP 20 suitable for perfect lighting condition 36 watt 240 volt, 50 Hz AC supply.complete all as specified and directed

Supply and fixing ceiling fans complete with blades, down rods, electronic remote regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed

Supply and fixing LED security light luminaire 30 watt freedom , pressure die cast aluminum housing, heat resistant glass, IP66 protection, better optics for uniform distribtion complete with all accessories internally pre wired and including connecting up with three core 1.5 sqmm flexible copper conductor cable from ceiling rose to connector of light complete all as specified and directed.

Supply and fix in repairs MCB DB 4 way (VTPN) vertical sheet metal enclosure TPN 415 volts, 50 Hz, with IP-43 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting with one MCB as incommer complete all as specified. Note : MCB SP/TPN shall be measured and paid seperately under appropriate items of this schedule . complete all as specified and directed Note : Copper thimble shall be used for connection of cable .

S & F in repairs MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting complete all as specified complete all as specified and directed Note : Copper thimble shall be used for connection of cable .

All as per item No 48 above but 8 way . complete all as specified and directed

All as per item No 48 above but 12 way. complete all as specified and directed

Supply and fix MCB FP pole 40-63 amps 415 Volts C series. complete all as specified and directed

Supply and fix MCB, single pole 240 volts 6 to 32 Amps capacity B series fixed in DB's. complete all as specified and directed

Supply and fix MCB, single pole and neutral link 240 volts 6 to 32 Amps capacity B series fixed in DB's. complete all as specified and directed

Supply and fix MCB, single pole 240 volts 40 to 63 Amps capacity B series fixed in DB's. complete all as specified and directed

Supply and fix MCB, single pole and neutral link 240 volts 40 to 63 Amps capacity B series fixed in DB's. complete all as specified and directed

S & F in repair Flame proof single phase Exhaust Fan 300/350 mm including copper winding, bearing and other fixing accessories of suitable size complete all as specifed and directed

S & F in repair Flame proof single phase Exhaust Fan 450 mm including copper winding, bearing and other fixing accessories of suitable size complete all as specified and directed

Supply and fixing of PVC conduit size 25mm Rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends,elbows, reducers, bell mouth tube ends and fixing accessories including chase cutting such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed

Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm buried directly in the ground vertically to depth not less than 3 Mtr below the ground level with the top edge of earth plate, depth not less than 2.25 Mtr below the ground level connected to GI earth wire 4mm dia by means of bolts, nuts and washers protected by GI tubing light grade 15 mm dia uptoTest point, 20 mm dia watering pipe with funel & wire mesh, PCC pit in PCC 1:2:4 using 20 mm stone aggregates chamber 40 mm thick RCC cover slab (1:2:4) type B-1 using 20 mm graded stone aggregates complete all as specified and shown in electrical plate No.3 of SSR Part-I including earth work in any type of soil ,removal of surplus sil and providing charcol dust & salt layers all around the earth plate upto 15 cm all as required specified & directed by engr in charge ( Note:- Up to 7.5 Mtr length of pipe of 15 mm dia and GI wire shall be deemed to be included in unit rate quoted by tenderer GI pipe and GI strip beyond 7.5) will be measured separately under respective item complete all as specified and directed

M/S Badri Electicals