Tender for the work of fabrication for various material use for HT/LT line at Dharampur Division under jurisdiction of Dharampur Division office.

SCHEDULE- B FOR FABRICATION WORKS OF HT-LT LINE MATERIALS

Item Code Details of works Unit 2024-25

9910000049/ Fabrication of Anchor Rod from 16 SQ.mm MS Raoundbar & 65 mm x 65 mm x 6 mm /

9910000050 mm x 50 mm x 6 mm M.S. angle as per approved drawing and requirement of the company.

Fabrication of Anchor Rod from 16 SQ.mm MS Raoundbar & 50 mm x 6 mm M.S. flate as per

approved drawing and requirement of the company.

Fabrication of Eye Bolt from 16 SQ.mm MS Raoundbar with supplying of 2 (two) nuts of

suitable size as per approved drawing and requirement of the company.

9910000028/ Fabrication of Turn Buckle from 16 SQ.mm MS Raoundbar & 65 mm x 65 mm x 6 mm /

9910000016 mm x 50 mm x 6 mm M.S. angle as per approved drawing and requirement of the company.

Fabrication of 11' (feet) long Top/Bottom/D.O. angle from 65 mm x 65 mm x 6 mm M.S. angle

as per approved drawing and requirement of the company.

Fabrication of 9' (feet) long Top/Bottom/D.O. angle from 65 mm x 65 mm x 6 mm M.S. angle

as per approved drawing and requirement of the company.

Fabrication of 4'6" (feet) long Tapping / bracing angle from 65 mm x 65 mm x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of 4'6" (feet) long Tapping / bracing angle from 50 mm x 50 mm x 6 mm M.S.

angle as per approved drawing and requirement of the company.

Fabrication of 2'3" (feet) long bracing/ support angle from 65 mm x 65 mm x 6 mm M.S. angle

as per approved drawing and requirement of the company.

Fabrication of 2'3" (feet) long bracing/ support angle from 50 mm x 50 mm x 6 mm M.S. angle

as per approved drawing and requirement of the company.

Fabrication of 11KV HT 'V' Cross Arm from 65 mm x 65 mm x 6 mm M.S. angle as per

approved drawing and requirement of the company.

Fabrication of 11KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S. angle and 50mm x

mm M.S. flat as per approved drawing and requirement of the company.

Fabrication of 22KV HT Top fitting from 65 mm x 65 mm x 6 mm M.S. angle and 50mm x

mm M.S. flat as per approved drawing and requirement of the company.

Fabrication of 22KV HT 'V' Cross Arm from 65 mm x 65 mm x 6 mm M.S. angle as per

approved drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for PSC pole from 50mm x 6 mm M.S. flat as per

approved drawing and requirement of the company.

16 9910000042 Fabrication of stay clamp for 116 x100 MM GIRDER POLE PAIR

Fabrication of 'U' Clamp from 50mm x 6 mm M.S. flat as per approved drawing and

requirement of the company.

Fabrication of 'C' clamp suitable for PSC pole from 50mm x 6 mm M.S. flat as per approved

drawing and requirement of the company.

Fabrication of 'C' clamp suitable for RSJ GIRDER pole from 50mm x 6 mm M.S. flat as per

approved drawing and requirement of the company.

Fabrication of Three hole patti from 50mm x 6 mm M.S. flat as per approved drawing and

requirement of the company.

Fabrication of 11' (feet) long Top/Bottom channel from 100 mm x 50 mm x 5 mm M.S.

channel as per approved drawing and requirement of the company.

Fabrication of 9' (feet) long Top/Bottom channel from 100 mm x 50 mm x 5 mm M.S. channel

as per approved drawing and requirement of the company.

Fabrication of 11'(feet) long angle bracing from 50 mm x 50 mm x 6 mm M.S. angle as per

approved drawing and requirement of the company.

Fabrication of 9'(feet) long angle bracing from 50 mm x 50 mm x 6 mm M.S. angle as per

approved drawing and requirement of the company.

Fabrication of 11' (feet) long channel welded from assorted length of scrap channel as per

approved and requirement of the company

Fabrication of 9' (feet) long channel welded from assorted length of scrap channel as per

approved and requirement of the company

Fabrication of Guy Clamp pair suitable for 10 mtr PSC pole from 50mm x 6 mm M.S. flat as

per approved drawing and requirement of the company.

Fabrication of Guy Clamp pair suitable for 9/11mtr RSJ GIRDER pole from 50mm x 6 mm

M.S. flat as per approved drawing and requirement of the company.

Fabrication of 5' (feet) long Tapping angle from 65 mm x 65 mm x 6 mm M.S. angle as per

approved drawing and requirement of the company.

Fabrication of H.T. Ext'n suitable for 22KV system from 65 x 65 x 6 mm M.S. angle as per

approved drawing and requirement of the company.

Fabrication of H.T. Ext'n suitable for 11KV system from 65 x 65 x 6 mm M.S. angle as per

approved drawing and requirement of the company.

Fabrication of 750 mm long Channel for HT AB conductor from 100mm x 50mm x 5mm M.S.

Channel as per approved drawing and requirement of the company.

Fabrication of 22KV HT "V" Cross Arm from 100mm x 50mm x 5mm M.S. Channel as per

approved drawing and requirement of the company.

ESTIMATE COST Rs.

TOTAL In Word : Twenty Eight Lakh Rupees Only.

SIGNATURE OF CONTRACTOR EXECUTIVE ENGINEER(O&M)

DHARAMPUR DIVISION

1. All fabricated items shall be fabricated by using weilding rods confirming to the

relevant ISI specifications and as directed by Engineer In-charge.

2. All fabricated items shall be painted with good quality (ISI Marked) of red oxide paint.

3. Necessary electricity connection shall be provided by DGVCL on payment of required

charges for connection & electiricity bill of the same shall be paid by the contractor.

4. The rates are inclusive of PF & Works Contract Tax and Exclusive of Service Tax.

5. The contractor must have complete the such types of fabrication work order above Rs.20,00,000/- in last year with DGVCL.

6. 11 KV 'V' Cross Arm should be fully welded on both side as per ins. Of EIC.

7. The contractor must have PF,PAN Number .

8, The contractor must have to GST number.