REPAIR MAINTS OF CENTRAL FACILITIES TRAINING SHEDS OF SOUTH COMPLEX UNDER AGE BR I AT IMA DEHRADUN

Amount

Taking down cement plaster on brick or stone walling built in CM including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Brick work with sub class 'B' bricks (old size) straight or curved on plan exc 6.00m mean radius built in CM (1:6) including demolition of brick work/stone masonry built in cement mortar complete all as specified and directed.

Brick work with sub class ‘B’ bricks (old size), straight or curved on plan to any radius in half brick thick walls built in CM 1:4 including demolition of brick work/stone masonary built in cement mortar complete all as specified and directed.

Rendering 15mm thick plaster on fair faces of brick work or concrete surface in CM 1:4 finished even and smooth without using extra cement and mixed with water proofing compound as per manufactures instructions, complete all as specified and directed Note- WPC will be measured paid as supply only under respective items separetely.

Rendering 15mm thick plaster on other than fair faces of brick work or concrete surface in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5mm thick plaster in CM (1:3) on concrete surface of ceiling finished even & smooth without using extra cement complete all as specifiied and directed.

Supply only liquid water proofing compound complete all as specified & directed.

PCC 1: 3 : 6 type C1 using 20 mm graded crushed stone aggregate as in surface channels and drains including necessary use & waste of formwork and demolition of existing old cement concrete of any description complete all as specified and directed.

Extra for forming fair finished drain or channel n. exc 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs, etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc including demolition of existing cement concrete complete all as directed.

PCC 1;4;8 type D-2, using 40 mm graded crushed stone aggregate as in foundation, filling, mass concrete and sub base of floor including demolition of existing old concrete complete all as specified and directed.

50mm thick PCC type B1 1:2:4 (20mm graded crushed stone aggregate) as in floors and finishing the concrete even and smooth using extra cement including demolition of existing old cement concrete floors etc complete all as directed.

75 mm thick PCC 1;3:6 type C-2 using 40mm graded stone aggregate as in plinth protection or similar places and finishing the surface even & smooth with out using extra cement including making joints 12mm wide to the full depth of PCC at every 3 meter and every change of direction and filling the same with mixture of bitumen & sand in ratio (1:1) by weight including necessary form work etc and including demolition of existing old cement concrete, complete all as specified and directed.

Rubberised polished chequered cement concrete coloured tiles 30 cm X 30cm X 25 mm thick, set, jointed & pointed in neat cement slurry in floor with grey cement & pigment to match the surface of tiles over & including 15 mm thick screed bed in CM 1:6 complete including dismantling of existing tiles with screed bed of any description and in any position complete all as specified and directed.

80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; including dismantling of existing damaged flooring etc complete, all as specified and directed.

60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; including dismantling of existing damaged flooring etc complete, all as specified and directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified & directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frames) area n.exc 1.50 Sqm each complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm and n.exc 2 Sqm each complete all as specified & directed

Pressed steel frame of 105x60 mm section for doors with one or more rebates including necessary fixing lugs, hinges, lock strikes plates etc including PCC 1:3:6 type C-0 using 12.5mm graded crushed stone aggregate as in back filling complete all as directed.

30 mm thick flush shutter, ISI marked, solid core construction, with block board core and ply wood face panel commercial type on both side as approved complete all as specified & directed.

2nd class hard wood, plain straight chowkats & frame wrought rounded or chamfered put together with glue pinned at joints and fixed complete all as specified and directed.

Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top & bottom rails ms frame shall be covered with heat moulded plain colour PVC "C" channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2010 etc complete all as directed

Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube & edges will be painted to match with printed sheets complete all as specified and directed.

Butt hinges, 100mm long, medium weight, cold rolled, mild steel complete all as directed

150mm long aluminium anodized handle cast complete all as directed.

200mm long aluminium anodized barrel tower bolt of extruded section complete all as directed.

250mm long aluminium anosized sliding door bolt with hasp staple (bolt type) and fixing clips to sheet cast or extruded section of cast aluminium complete all as directed.

200mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed in repair.

300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed in repair complete all as directed.

150mm size Brass handles, cast type polished bright fixed in repair complete all as directed.

Glazed ceramic coloured tiles of size350x 250x 7 mm/ 450X 350X 7mm thick, as in vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 10 mm thick rendering in cement mortar 1:4 finished rough surface to receive tiles including dismantling of existing wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in CM 1:4 complete including dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises all as directed.

Vitrified ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Vitrified ceramic tiles dark shade 10mm thick (square/rectangular), area of each tiles not exceeding 0.36 sqm, laid in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15 mm thick screed bed or bedding layer in CM 1:4 complete and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick laid over and including 20mm thick cement sand screed CM 1:6 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Machine cut kota stone slab flooring 18-20mm thick laid over and including 10mm thick rendering in CM 1:4 as base on vertical surface laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and rubbing and polishing including dismantling of existing tiling and cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Granite stone of any colour (of any type) 20mm thick machine cut (table rubbed & polished), as in floors, cooking platforms and like bedded with and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry, and pointed with white with admixture of pigment to match with shade of granite stone including dismantling of existing stone slabs including cement mortar bedding (but not backing) and rubbish off the premises complete all as directed.

Cutting and grinding of existing terrazzo/Kota/marble stone floor surfaces (2 cut) on horizontal & vertical surface and finally finishing the surfaces uniformally by applying floor polish complete all as directed.

1.25mm thick Mild steel, plain, black sheet in water troughs ducts; urinal trough and funnels, etc. cut to size edges beaded if directed, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required in roof gutters of PT sheds including taking down existing gutter complete all as specified & directed. Note :- Rate of scaffolding and other support material deemed to be included in the rate.

160mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall with PVC clamp including taking down old unserviceable pipe of any description complete all as specified & directed..

160mm dia PVC (SWR) bends any radius, fixed in repair complete all as specified & directed.

A coat of cold applied bituminous primer over cleaned surface @ 0.30 Kg/Sqm and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm followed by APP modified five layer polymeric membrane 3mm thick, minimum weight 3.60 kg/sqm reinforced with polyester non-woven fabric (weighing not less than 150 gms/sqm) manufactured by authorised manufacturer specified in particular spicification, laid as per the manufacturer instruction with side over lap of 75mm & end over lap of 100mm & tucked into the chases on vertical surfaces and applying one coat of hot blown bitumen 85/25 grade @ 1.20 Kg/Sqm finally finished with bituminous aluminum paint @ 0.20 Kg/Sqm complete including taking down existing roof treatment the RCC slab, cleaning off all foreign material by wire brushing, cleaning off surface and removal of spoil to a distance n.exc 500m complete all as directed. Note:- The work shall be executed through authorised applicator approved by GE. Note :- Work to be executed on folder roof of somnath stadium at a height of 15 mters above Ground level.

15mm thick screed bed in CM 1:4 on roof surface finished even and smooth mixed with water proofing compound as per manufecturer's instructions with and including brushing neat cement sluri @ 3Kg per sqm over old RCC roof including taking down existing cement plaster including racking out joints,hacking for key, scrubbing down with water etc.complete all as directed. Note : WPC will be measured and paid separately as supply only.

Cleaning of roof slab, chajja including picking sweeping cleaning and washing with water to remove dust including taking down of existing roof treatment and providing water proofing treatment under:- (a) Applying a coat of STAR PROOF MB-602 with help of brushes on the cleaned RCC slab/Chajja after necessary repair with repair mortar. (b) Laying a layer of fiber cloth on wet MB-602 coating and applying another cost of MB-602 (c) After drying of surface finaly applying two coat of STAR PROOF SP-600 of any colour as per manufacturers instruction. NOTE:- The work of above water proofing treatment sall be got executed as per manufacture instructions through expert team or authorised applicator of manufacturing MS STAR SS PL Make:- APURVA INDIA/ STP/ apply treatment by using DAMPGUARD treatment of Dr Fixit as per manufacturer instructions and approved by GE.

15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.

Frosted toughened glass urinal partitions size 400mmx1000mmx6mm thick fixed with SS U clip, screw & other hardware fixed in repair complete all as specified & directed.

Chromium plated Urinal spreader for urinals fixed in repair complete all as directed. Make : Cera Cat No. F8070201 or equivalent or equivalent of make Hindware/Essco (Jaquar)

Self closing angle cock pressmatic for urinals with wall flange and 200mm connecting pipe fixed in repair complete all as specified & directed. Make : Cera Cat No. F9020203 or equivalent make of Hindware/Essco ( Jaquar).

15mm dia basin inlet connection (angle cock) fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No.SQT-526KN or equivalent of Make cera/Hindware

15mm dia pillar cock, super delux with aerator, screwed for iron pipe and fixed in repair complete all as directed. Make- ESSCO (Jaquar) SQT-508KN or equivalent make of cera/Hindware

Chromium plated brass hot & cold basin mixer swan neck tap with Left/right Hand operating knob with Aerator mixer fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No SQT-510KN/510AKN or equivalent of Make cera/Hindware

15mm bore long body bib tap cast copper alloy chromium plated fancy type fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No. SQT-512KN or equivalent of Makecera/Hindware

15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar ESSCO cat part No SQT-511KN or equivalent of Cera/Hindware

15mm bore 2-way long body bib tap cast copper alloy chromium plated fancy type fixed in repair complete all as directed. Make: ESSCO (Jaquar) cat No. SQT-512AKN or equivalent of Make cera/Hindware

15mm bore stainless steel jet spray with 1.00meter PVC tube fixed in repair complete all as directed. Make: ESSCO (Jaquar) Cat No. ALE-547 or equivalent of make Cera/Hindware

Bottle Trap with Fully Casted Body 32 mm with 190 mm and 125 mm Long Connecting Pipes & Wall Flange fixed in repair complete all as directed Make: ESSCO (Jaquar) Cat No. ALE-773AL190X125 or equivalent of make Cera/Hindware

Brass chromium plated towel rail 600mm size fixed in repair complete all as directed. Make : ESSCO (Jaquar) Cat No. AEC-1111 or equivalent of make Cera/Hindware

Vitreous china EWC star white colour, wall mounted size 54.5x34.5x36 Cm with concealed cistern size 46x45x8 cm with flush plate, seat cover, fixed in repair complete all as specified & directed. Make: ENIGMA COMBO of Hindware Cat. No.: 518887 or equivalent of make Cera/ Parryware.

Vitreous china EWC “ star white colour”, floor mounted size 72.5 x 38.5 x 76 cm with Cistern with Lid (With Fittings), seat cover fixed in repair complete all as specified & directed. Make: F LORENC E of Hindware Cat. No.:92058 (S-22) or equivalent of make Cera/ Parryware.

Vitreous china Urinal star white colour, Size 37 x 39 x 61 cm including sensor, waste coupling fixed in repair complete all as specified & directed. Make: SENSO ARTof Hindware Cat. No.: 60018 or equivalent of make Cera/ Parryware.

Vitreous china Urinal “Star white” colour, flat back large Size 37.5 x 39 x 59 cm including waste coupling fixed in repair complete all as specified & directed. Make:Hindware Cat. No 60002 or equivalent of make Cera/ Parryware.

Vitreous china WHB Star white oval type counter top WHB 63 x 50 cm fixed in repair complete all as directed. Make : Hindware Cat. No.: 10017 or equivalent in Cera, Parryware

CP Health faucet 8 mm dia for EWC 1.20 mtr long flexible pipe and two steel check nuts complete all as specified and directed. Make:- Jaquar- Cat part No ALD-573 or equivalent to Hindware/Cera

Plastic water closet seat cover, white, closed pattern with flat bottom cover and mild steel chromium plated or aluminised hinging device fixed in repair complete all as specified and directed.

Soap Dish (Polycarbonate) complete all as specified and directed, Make : Jaquar- Cat part No AQN-7733 or equivalent to Hindware/Cera

100mm dia chromium plated grating with/without hole fixed in repair complete all as directed.

Vitreous china squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including replacement of 'P' or 'S' CI, concrete bedding and making good existing floor fixed in repair complete all as specified and directed.

PVC low level flushing cistern 10 Ltr capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repair complete all as specified and directed.

PVC conections 15mm size with PTMT nuts of 450 mm long fixed in repair complete all as specified and directed

PVC conections 15mm size with PTMT nuts of 600 mm long fixed in repair complete all as specified and directed

100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including taking down existing pipe complete all as specified and directed

75mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors including taking down existing pipe complete all as specified and directed

Cast iron 75mm diameter of outlet floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregate) fixed in repair complete all as specified and directed

Ball valve 20mm dia high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball min weight 210 gms fixed in repair complete all as directed. Make: Prayag

Hacking out old broken glass pane of any thickness and size from wooden/metal frame/aluminium frame including punching or drilling and glazing pins etc complete all as directed

4mm thick sheet glass ordinary quality type & glazing with oil putty wooden beads in squares not exc 0.5 Sqm in each pan, etc complete all as directed

5.5mm thick frosted glass fixed in aluminium door/window/partition fixed with rubber gasket and aluminium beading complete all as directed.

Stainless steel drapery rod 25 mm dia with supporting brackets all as directed and approved fixed in repair complete all as directed.

Stainless steel decorative finale suitable for 25mm dia stainless steel drapery rod all as directed and approved fixed in repair complete all as specified & directed.

Preparing surfaces, holding the members in true position and welding in reparis n. exc 2.5 cm in length, thickness of metal to be welded exc 6 mm but n. exc 9 mm complete all as directed.

2nd class hard wood as in wooden scantling clean swan fixed with nails complete including dismantling existing timber scantlings 40 sqcm and over in section in any position etc complete all as specified and directed.

Dismantling wall & ceiling boards of any description including frame work complete all as directed.

Non anodised aluminium rectangular hollow sections of size 50.8x 25.4mm x 1.16mm thick for panelling grid, to be placed at 600mm apart in both vertical and horizontal directions. Extra members at corners/junctions are also to be provided. The frame shall be fabricated & installed in position firmly with the help of suitable aluminium cleats, screws, clamps, rawl plugs complete all as specified and directed.

12mm thick plywood grade BWR, type BB, fixed with screws to aluminium frame work as in wall panelling complete all as specified and directed.

4mm thick Veneered decorative plywood grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work complete all as specified and directed

Preparation of new or previously untreated wooden surfaces of any description, over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of pink primer complete all as directed.

Preparation of new wooden surfaces over 10 cm width or girth including rubbing with sand paper of different sizes, filler coat, including filling thinner with fine cloth and spirit lak dana polishing up to desired finishing complete all as specified and directed.

MS work as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade on training sheds, PT sheds sports ground poles/structure and any type of training structure (obstacles) of any height complete all as specified and directed. Note :- Rate of scaffolding support material and all safety meausures of workers required to complete the work deemed to be included in the quoted rate.

Preparation of old painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint with approved shade complete all as specified and directed

Preparation of old plastered/un-plastered surfaces of ceiling by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices etc and applying one coat of white wash on ceiling complete all as specified and directed.

Preparation of old plastered/un-plastered surfaces of wall by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cornices, pillar etc and applying one coat of white wash on walls complete all as specified and directed.

Complete removing of existing treatment from wall / ceiling complete all as specified and directed. (work to be carried upto a height of 7.50m high)

Preparation of scrapped surface of wall / ceiling and applying Asian acrylic damp proof wall care putty 2mm thick in two coats as per manufacturer instruction complete all as specified and directed. (work to be carried upto a height of 7.50m high)

Preparation of puttyied surfaces of wall/ceiling and applying one coat of primer complete all as specified and directed.

Preparation of puttied surfaces and applying apex allura duracast venezio by means of steel trowel upto firm thickness of 1.00mm all as per manufacturers instruction and all as specified & directed. Make :- Asian Product code 1062 or equivalent of Nerolac/Berger. (work to be carried upto a height of 10.50m high)

Light buffing of trowelled surface to ensure that no trowel marks are obsrved over the surface and to be left for drying as per manufacturers instruction all as specified and directed. (work to be carried upto a height of 10.50m high)

Applying two coats of Apex ultima on the dried buffed surface to creat the surface so as to maintain texture finish to walls as per manufacturers instruction all as specified and directed. Make : Asian or equivalent of Nerolac/Berger (work to be carried upto a height of 10.50m high)

Preparation of primed surfaces of wall / ceiling and applying two coats of plastic emulsion paint (light/dark shade) through normal roller application as per manufacturer instruction complete all as specified and directed. .

Preparation of primed surfaces of wall / ceiling and applying two coats of oil bound distemper through normal roller application as per manufacturer instruction complete all as specified and directed.

Preparation of old plastered surfaces of walls by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil emulsion distemper on walls complete all as specified and directed.

Preparation of new plastered surfaces of wall and applying two coats of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger)) complete all as directed

Preparation of new plastered surfaces of wall and applying three coats of white wash etc complete all as directed.

Preparation of new plastered surfaces of wall and applying two coats of oil bound emulsion over a coat of chalk whitening complete all as directed

Preparation of new plastered surfaces of ceiling and applying three coats of white wash etc complete all as directed.

Preparation of old plastered/unplastered surfaces of wall and applying one coat of weather exterior emulsion paint (Apex paint of Asian Paint / Weather proof of berger) on walls complete all as directed. Note :- Work to be carried out upto 10.50mtr height.

Meher enterprises

Aron Water Proofing and Pest Control