S. R. to (Toilet block) repairing and renovation work at Bardoli Police Station, Dist. Surat. (Incl. Elect.) (S. R. Priority - 2025-26) (Second Attempt)

No. In Figure In Words

1 Dismentalling tiled of stone floors laid in mortar including stacking of 400.00 Sqmt 50.12 Rupees Fifty And Paise Twelve Only

serviceable materilas and disposal of unserviceable materials with all

lead and lift.

2 Dismentaling door, windows, ventilatiors etc. ( wood or steel) shutters 78.00 Nos 261.29 Rupees Two Hundred Sixty One And

including chowkhats architraves, holdfasts and other attachment etc. Paise Twenty Nine Only

complete and stacking them within all lead and lift. (i) Exceeding

Sq.M. in area

3 Dismentaling sanitary fittings like wash basin . W.C. 45.00 Nos 421.71 Rupees Four Hundred Twenty One

pan Indian and European type, flushing tank etc. including stacking the And Paise Seventy One Only

materials with all lead and lift.

4 Dismentlling C.I. pipes, G.S.W.pipes and A.C. rain water pipes,UPVC 488.00 Rmt 78.06 Rupees Seventy Eight And Paise Six

pipes,CPVC pipes with fittings and clamps including stacking the Only

materials with all lead and lift ( for any dia, of pipe)

5 Brick work using common burnt clay building bricks having crushing 1.00 Cum 4458.46 Rupees Four Thousand Four Hundred

strength not less than 35 Kg/Sq.cm.in foundation and plinth in cement Fifty Eight And Paise Forty Six Only

mortar 1:6 (1-cement;6-coarse sand), Conventional bricks.Bricks with

frog only shall be used. For All Floors.

6 Providing and fixing standared extruded of alluminium section of size 16.00 Sqmt 1163.92 Rupees One Thousand One Hundred

63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt) Sixty Three And Paise Ninety Two

with colour anodized alluminium frame for ventilation with 5 mm thick Only

frosted glass as details etc complete for Ventilation.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

7 Providing and fixing solid PVC Flush Door shutter 24mm thick. made 57.00 Sqmt 4513.87 Rupees Four Thousand Five Hundred

from Co-extruded three layer rigid PVC foam sheet(single Extruded) Thirteen And Paise Eighty Seven

with density not less than 600kg/cbm outer layer (0.8-1mm)thick should Only

be rigid PVC with density of not less than 1400kg/cbm. Door should be

water proof, Termite proof, fire retardant & having good screw holding

8 Providing and Fixing WPC door patti 24mm x 6mm thick as per detail 155.00 Rmt 57.02 Rupees Fifty Seven And Paise Two

drawing and as directed by engineer in charge. Rates are inclusive of all Only

material, labour and taxes etc. Complete

9 Provinding 10mm thick cement PLASTER in single coat of interior 400.00 Sqmt 192.07 Rupees One Hundred Ninety Two

plastering and finished even and smooth in cement mortar 1:3 ( 1 And Paise Seven Only

cement : 3 sand ) and finishing with floating coat of neat cement slurry

10 Provinding CEMENT VATA (10cm x 10cm) size quarter round in 321.00 Rmt 24.04 Rupees Twenty Four And Paise Four

cement mortar (1 : 1) including neat cement finishing, watering etc. Only

11 Applying two coats of water proofing chemical (Zycosil) in proportional 119.00 Sqmt 110.70 Rupees One Hundred Ten And Paise

1:10 (one part of zycosil + 10 part of water) on the water proofing Seventy Only

plaster including preparing the surface and ponding test etc. complete

as directed by Engineer-In-charge.

12 Provinding and Filling Cinder including watering, consolidation etc. 18.00 Cum 791.68 Rupees Seven Hundred Ninety One

complete. And Paise Sixty Eight Only

13 Providing & laying ordinary CEMENT CONCRETE 1:2:4 ( 1 cement : 2 119.00 Sqmt 335.72 Rupees Three Hundred Thirty Five

coarse sand : 4 graded machine broken stone aggregate 20 mm And Paise Seventy Two Only

nominal size ) for flooring Laid in one layer finished with floating coat of

neat cement (A) 50 mm Thick.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

14 Providing & Laying 24" x 24" vitrified 8mm thick tile flooring over 20 mm 119.00 Sqmt 1453.19 Rupees One Thousand Four Hundred

(average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new Fifty Three And Paise Nineteen Only

surface or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and material jointed with color cement

slurry including finised with flush pointing & cleaning the surface

15 Provinding & laying Printed / Coloured GLAZED TILES 8 mm thick in 281.00 Sqmt 1498.30 Rupees One Thousand Four Hundred

skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 ( Ninety Eight And Paise Thirty Only

1 cement : 3 coarse sand ) & jointed with white cement slurry for ALL

FLOOR. The size,brand & make of tiles shall be as approved by

16 Providing and fixing Telephonic Black Colour Granite shelve/ partition 18.00 Sqmt 2115.40 Rupees Two Thousand One Hundred

18 mm thick embaded in to wall at support including racking and Fifteen And Paise Forty Only

finishing smooth the surface including cutting the stone as and where

required etc. complete including rounding of exposed edges etc.

complete as directed by Engineer-In-charge.

17 Providing and fixing concealed or open center point to wall ceiling & 119.00 Rmt 206.73 Rupees Two Hundred Six And Paise

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Seventy Three Only

(NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete. Pipe shall be concealed or open as mention in tender

18 Providing and fixing concealed or open center point to wall ceiling & 129.00 Rmt 251.31 Rupees Two Hundred Fifty One And

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Paise Thirty One Only

(NSF) seal for potable water of following dia. nominal bore tube fittings

and clamps including making good the wall, ceiling and floor etc.

complete. Pipe shall be concealed or open as mention in tender

description. Pipe shall be as per approved make of GSPHCL make list.

19 Providing and fixing concealed or open center point to wall ceiling & 22.00 Rmt 449.39 Rupees Four Hundred Forty Nine And

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Paise Thirty Nine Only

(NSF) seal for potable water of following dia. nominal bore tube

fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with

washer for Vertical water supply pipe. Pipe shall be concealed or open

as mention in tender description. Pipe shall be as per approved make of

GSPHCL make list [E] 40mm Dia

20 Providing and fixing concealed or open center point to wall ceiling & 54.00 Rmt 660.61 Rupees Six Hundred Sixty And Paise

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation Sixty One Only

(NSF) seal for potable water of following dia. nominal bore tube

fittingswith Z patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with

washer for Vertical water supply pipe. Pipe shall be concealed or open

as mention in tender description. Pipe shall be as per approved make of

GSPHCL make list[F] 50mm Dia

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

21 Provinding and fixing Gun Metal check or non return full way WHEEL / 10.00 Nos 656.86 Rupees Six Hundred Fifty Six And

HANDLE VALVE 40 mm dia.With All Necessory Fittings. Paise Eighty Six Only

22 Provinding and fixing water Closet Squatting (ORRISSA TYPE W.C. 12.00 Nos 1338.77 Rupees One Thousand Three

PAN ) size 580mm first quality including necessary "P" or "S" trap, Hundred Thirty Eight And Paise

including jointing the trap with pan & soil pipe in viterous chine white Seventy Seven Only

colour, Joints shall be pipe sealent.

23 Providing & Fixing Wall Hung with PVC Flush Tank, Soft Seat Cover & 3.00 Nos 5470.90 Rupees Five Thousand Four Hundred

intergal "P" or "S" Trap including Jointing the Trap with Pan and Soil Seventy And Paise Ninety Only

pipe. Wall hung shall be fixed on S.S heavy duty rack bolt having 16mm

24 dia, 165mm

Providing length Single

& Fixing using Plastic sleeveBasin

Hole Wash Makewith

C.I or Drill

M.S.Bitt Only. &

brackete 18.00 Nos 3935.33 Rupees Three Thousand Nine

M. I . fisher union, P.V.C water pipe with Connection from Stop Cock to Hundred Thirty Five And Paise Thirty

Pillar Tap,PVC Bottle Trap with connection 32mm dia. C.P. brass waste Three Only

coupling with Connection 32mm dia waste Pipe up to N.T etc.

Complete. Rate are inclusive of all matreials, Labour & Necessary

25 Provinding and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 33.00 Nos 593.70 Rupees Five Hundred Ninety Three

mm diameter with jali of the following nominal diameter of Self cleansing And Paise Seventy Only

design with C.I scread down or hinged grating including cost of cutting

and making good the walls.

26 Provinding and fixing PVC SWR MULTY NANHI TRAP IS:14735 for 24.00 Nos 1122.26 Rupees One Thousand One Hundred

drain - 100 mm dia. With jali of following nominal dia. of Self cleansing Twenty Two And Paise Twenty Six

design with C.I screwed down or Hinged grating including the cost of Only

cutting and making good the walls. Rates are inclusive of all necessary

fittings, material, labour etc. complete as per direction of Engineer In

27 Providing and fixing to Wall Ceilling and Floor SWR Rain Water pipe as 90.00 Rmt 314.52 Rupees Three Hundred Fourteen And

Per IS-13592 of 90mm Dia Complete with Special flings, Compressor Paise Fifty Two Only

type Fittings, Including making good the ceiling and floor on terrace rain

water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical pipe

and 90mm bend at the end near by Ground level rate are Inclusive of all

Necessary Fittings required.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

28 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. soil waste 30.00 Rmt 256.81 Rupees Two Hundred Fifty Six And

pipe with "O" ring of ISI13592/92-2013 (Reaffirmed 2018) or its Paise Eighty One Only

relevant & latest edition &, Pipe fixing with Z Patti (Minimum 1.6mm

thick) with 6mm Dia U Clamp with washer for Vertical Drain pipe,

etc.complete and making good the wall ceiling and floor. (A) 75mm dia

29 Providing and fixing to wall, ceiling and floor U.PVC SWR soil waste 60.00 Rmt 485.22 Rupees Four Hundred Eighty Five

pipe with ' O ' Ring 110 mm dia. of ISI13592/92-2013 (Reaffirmed And Paise Twenty Two Only

2018) or its relevant & latest edition & Pipe fixing with Z Patti (Minimum

1.6mm thick) with 6mm Dia U Clamp with washer for Vertical Drain pipe,

etc.complete and making good the wall ceiling and floor. (B) 110mm

30 Provinding and fixing in position PVC COWEL VENT to pipe 75 mm dia 2.00 Nos 16.47 Rupees Sixteen And Paise Forty

directed. Seven Only

31 Provinding and fixing in position PVC COWEL VENT to pipe 110 mm 4.00 Nos 28.16 Rupees Twenty Eight And Paise

dia directed. Sixteen Only

32 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are 66.00 Nos 990.61 Rupees Nine Hundred Ninety And

inclusive of all matreials, Labour & Necessary Fittings etc. Complet as Paise Sixty One Only

per Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. Materials used for the above items Must be list

approved by G.S.P.H.C.L.

33 Providing and fixing 600 mm x 450 mm bevelled edge mirror of superior 18.00 Nos 850.90 Rupees Eight Hundred Fifty And

glass mounted on wall with S. S. Studs (Mouthless) as directed by Paise Ninety Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

34 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, 9.00 Nos 1078.70 Rupees One Thousand Seventy Eight

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, And Paise Seventy Only

Specifications and as per the Instruction of Engineer In charge. The

Model & Make of Towel Rod Shall be as per the Approved Make List of

35 Providing & Fixing Towel Ring. Rate are inclusive of all matreials, 18.00 Nos 909.08 Rupees Nine Hundred Nine And

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Paise Eight Only

Specifications and as per the Instruction of Engineer In charge.

Materials used for the above items Must be list approved by

36 Providing & fixing S.S. CLOTH HANGER ( 5 HOOK ) as per per Detail 9.00 Nos 249.85 Rupees Two Hundred Forty Nine And

drawigs and as directed by Engineer in charge. Rate are inclusive of all Paise Eighty Five Only

material, labour, Taxes. Samrat brand as approved.

37 Providing & Fixing Shower with Arm. Rate are inclusive of all matreials, 9.00 Nos 931.79 Rupees Nine Hundred Thirty One And

Labour & Necessary Fittings etc. Complet as per Detailed Drawings, Paise Seventy Nine Only

Specifications and as per the Instruction of Engineer In charge.

Materials used for the above items Must be list approved by

38 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with 30.00 Nos 942.54 Rupees Nine Hundred Forty Two And

Exposed Part & Other Accessories (Sleeve, Lever, Wall Flange) . Rate Paise Fifty Four Only

are inclusive of all matreials, Labour & Necessary Fittings etc. Complet

as per Detailed Drawings, Specifications and as per the Instruction of

Engineer In charge. Materials used for the above items Must be list

approved by G.S.P.H.C.L.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

39 Providing & fixing CONSCEAL COCK 25 MM DIA modelflora model no 18.00 Nos 1233.57 Rupees One Thousand Two Hundred

850077with flange make hindware with all necesary fittings. Materials Thirty Three And Paise Fifty Seven

used for the above items Must be list approved by G.S.P.H.C.L. Only

40 Providing & Fixing Angle Cock with Wall Flange . Rate are inclusive of 15.00 Nos 665.51 Rupees Six Hundred Sixty Five And

all matreials, Labour & Necessary Fittings etc. Complet as per Detailed Paise Fifty One Only

Drawings, Specifications and as per the Instruction of Engineer In

charge. Materials used for the above items Must be list approved by

41 Providing & Fixing Health Faucets (ABS Body). Rate are inclusive of all 6.00 Nos 565.51 Rupees Five Hundred Sixty Five And

matreials, Labour & Necessary Fittings etc. Complet as per Detailed Paise Fifty One Only

Drawings, Specifications and as per the Instruction of Engineer In

charge. Materials used for the above items Must be list approved by

42 Constructing brick masonry chamber for under ground C.I. inspection 5.00 Nos 3793.18 Rupees Three Thousand Seven

chamber and bends with brick having crushing strength not less than 35 Hundred Ninety Three And Paise

kg./cm2 in C.M. 1.5 precast R.C.C. cover 1:1.5:3 of size 455 x 610 mm Eighteen Only

internal dimenslons. Including precast cover and frame shall be medium

43 Providing,Suppying & Fixing Precast R.C.C. Frame with Cover MD 10 5.00 Nos 1702.00 Rupees One Thousand Seven

Ton (Rubber Mould Finish) Inner Size 600 x 450mm with All Necessary Hundred Two Only

Fittings.Frame and cover shall be used approval by GSPHCL

44 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa 12.00 Nos 2098.98 Rupees Two Thousand Ninety Eight

waste coupling with Connection 32mm dia waste Pipe etc. Complete. And Paise Ninety Eight Only

Rate are inclusive of all matreials, Labour & Necessary Fittings etc.

Complete as per Detailed Drawings, Specifications and as per the

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

45 Credit value of C.I. pipes, G.S.W.pipes and A.C. rain water pipes,UPVC 488.00 Rmt -15.00 Rupees Only -7320.00

pipes,CPVC pipes with fittings and clamps including stacking the

materials with all lead and lift ( for any dia, of pipe)

46 Credit value of DOOR & window ( All dismantled materials in as is 78.00 Nos -100.00 Rupees Hundred Only -7800.00

whare its condition weather serviceble or unserviceable shall be

considered for cretdit and also taken away by the agency from the site

(Electrical Item)

47A Providing and fixing Point wiring with 1.1 KV grade ISI marked 15.00 Point 255.00 Rupees Two Hundred Fifty Five Only

approved make 2 x 1.5 sq.mm copper PVC insulated FRLS wire with

1.5 sq.mm (green) copper PVC insulated FRLS wire for earth continuity

in exiting FIA approved ISI mark white colour medium class 20/25

mm dia. embossed rigid PVC pipe erected flushed on wall/ceiling

complete with company fabricated Metal Groove PVC fitting fixed with

adhesive solution erected On wall along with continuous G. I. fish wire

to draw wires complete with approved make 5/6 Amp. tissino type

switch and accessories(Anchor(PENTA) make or Hi-Fi(ELLEY) make or

PANAMA make) (Approve make & model by EIC as per tender

specification,matching colour with Switch board /Ceiling rose/holder)

mounted On Metal / PVC/Wooden Box covered with 3 mm thick

Laminated sheet(Laminated Sheet Make:sandek, greenlam, formica,

bloom with ISI mark) with ISI Mark with necessary Lamp holder/ceiling

rose / H.D.Connector(Point Wiring Box:Make:zaral electrical, yansi,

supreme industries, electro switch gear, D’mark fabrication, sandek,

Formica, greenlam with ISI Mark) as directed as directed for future

extention , if required agency has to erect one higher size box & plate

as per instruction of EIC.cost of blank plate shall be paid as per tender

item For Light Point-In existing medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete (Conductor

resistance should be as per IS:8130/1984)

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

47B For Fan Point-In existing medium class Rigid PVC pipe and accessories 2.00 Point 255.00 Rupees Two Hundred Fifty Five Only

erected flushed on wall/ceiling complete

47C For loop on switch board (with 6 Amp. Switch & 3/5 pin socket both 5.00 Point 66.00 Rupees Sixty Six Only

having ISI Make)

48A Providing & Erecting following Shockproof tissino type accessories 50.00 Each 31.00 Rupees Thirty One Only

erected on 3 mm thick PC (Polycarbonate) sheet in PVC/

Metal/Wooden Box. erected on wall/ ceiling. For Tissino type (1) One

no Single pole 6 A Switch / Bell push

48B One no 3/5 pin 6 A Socket 5.00 Each 31.00 Rupees Thirty One Only

48C One no Single pole 16 A Switch & One no 6A/16A Universal Socket 3.00 Each 124.00 Rupees One Hundred Twenty Four

combined with indicator & fuse Only

48D Bakelite ceiling, rose 10.00 Each 18.00 Rupees Eighteen Only

48E Bakelite lamp holder 10.00 Each 22.00 Rupees Twenty Two Only

48F Electronic Hum free EME Socket Type Steps Fan Regulator 10.00 Each 217.00 Rupees Two Hundred Seventeen

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

49 Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked 3.00 Point 317.00 Rupees Three Hundred Seventeen

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with Only

1.5 sq.mm (green) copper PVC insulated FRLS wire for earth continuity

in existing FIA approved ISI mark white colour medium class 20/25

mm dia. embossed rigid PVC pipe erected flushed on wall/ceiling

complete with company fabricated Metal Groove PVC fitting fixed with

adhesive solution erected On wall along with continuous G. I. fish wire

to draw wires complete with approved make complete with

AmpTissino type Swich and accessories mounted tissino type switch

and accessories mounted On Metal /Wooden Box covered with 3 mm

thick PC(Polycarbonate) /Acrylic/Laminated sheet. with necessary Lamp

holder/ceiling rose / H.D.Connector as directed as directed for future

extention , if required agency has to erect one higher size box &

modular plate as per instruction of EIC. cost of blank plate shall be paid

as per tender item.(a) 16 Amp. tissino type Indicator switch & 1 No. 6/16

A tissino type universal socket white colour suitable for 3 pin top duly

both having ISI mark. In existing medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete (Conductor

resistance should be as per IS:8130/1984)

50 Providing & Erecting 3mm thick Laminated Sheet with grooving as 500.00 Sq. 2.00 Rupees Two Only

directed Inch.

51A Providing and erecting ISI mark Medium class RIGID PVC PIPES of 80.00 Mtr. 24.00 Rupees Twenty Four Only

following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution &

Clamps with following dia of pipes, in approved manner as directed For

20 mm dia.

51B For 25mm Dia 50.00 Mtr. 33.00 Rupees Thirty Three Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

52A Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 80.00 Mtr. 46.00 Rupees Forty Six Only

1.1 KV grade In Existing FIA approved ISI mark medium class 20/25

mm dia. embossed rigid PVC pipe with PVC fitting fixed with adhesive

solution to be erected on/in brick wall / slab along with continuous G. I.

fish wire to draw mains laid in approved manner with plastering by

cement mortar & finishing the surface to match the wall / ceiling

complete with FRLS PVC insulated wire for earth continuity. (Approved

ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded

conductor mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code.(In Existing

20/25mm Pipe) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984)

52B For 2 X 6.0 sq.mm. copper multi stranded conductor mains with 2.5 sq. 50.00 Mtr. 120.00 Rupees One Hundred Twenty Only

mm copper multi stranded conductor earthing as per standard colour

code ---(In Existing 20/25mm Pipe)[Wire must be having box packing]

53 Providing & fixing 25 mm. dia PVC corrugated Flexible pipe with 30.00 Mtr. 21.00 Rupees Twenty One Only

necessary socket, PVC bushes saddle,Check-nuts etc.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

54 Supplying and Erecting LED indoor fitting of approximately 4feet 40.00 Each 370.00 Rupees Three Hundred Seventy Only

long with LED of wattage 0.2W to 0.5W assemble on single

MCPCB with housing use as a heat sink shall be made from

Aluminum extrusion having enough strength (sample must be

approved by EIC) with polycarbonate diffuser with following

specification: (A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.

(C) Rated input wattage: max. 24w (D) Rated input current : 0.2 Amp

(E) Power Factor : Min. 0.90 (F) ATHD : Max. 15%

(G) Rated Luminous flux: Min. 2420 lm (H) CCT: 6500K

(I) CRI: Min. 80Ra (J) Driver Efficiency: Min. 80% (K) LED life span:

Min. 50000 Hrs @ L70 (L) Over Voltage protection: Withstand up to

440V/AC for 4 Hrs. (M)Surge protection : Min. 2KV

(N) IP rating: IP 20 (O) IK rating : IK 02 (P) Short circuit , Open circuit &

Reverse Polarity Protection must be provided (Q) Fixing clamp design

& strength should be sufficient to hold the fitting erected on wall or

ceiling. (R) 3 core copper wire of appropriate size with earthing

connector (Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

specification]

55 Supplying and erecting 8W led lamps with following wattage capacity of 24.00 Each 111.00 Rupees One Hundred Eleven Only

220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-

surge protection,Polycarbonate diffuser, mounting suitable for E14 / E27

/ B22 lamp holders, pf >= 0.5 LED Lamps integral type, with PC diffuser

suitable LAMP holder

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

56 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 20.00 Each 1929.00 Rupees One Thousand Nine Hundred

AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as Twenty Nine Only

per below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V,

(3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5)

RPM: minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball bearing: Two,

(9) Total Body: Top & Bottom should be alluminium, (10) Blade:

Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder

coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser: Min.

MFD (15% Tolerence) as per IS:1709-1984, (14) Down road: up to

mtr as per site requirment, (15) Required fixing accessories, (16)

core 0.50 sq.mm ISI wire as per site requirment, (17) No vibration and

noise due to mechanical parts. (18) Safety wire provided by

manufacturer with ceiling fan. (Agency has to erect safey wire with

ceiling fan and checked with EIC) (OEM has to approved model as per

tender specification and tested at ERDA)

57 Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. 5.00 Each 98.00 Rupees Ninety Eight Only

Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

58 Providing & Erecting 2.0 mtr. long Earthing system by making minimum 1.00 Each 7025.00 Rupees Seven Thousand Twenty Five

bore of 225 mm dia. in soft soil. Suitable for doing pipe-in-pipe Only

technology earthing. Earthing electric rod must be made from Corrosion

free hot dip galvanizing pipes having following specification. (A)

Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B ' Class ISI

mark of Reputed Brand, Inner pipe: - 42 mm minimum O.D., Pipe B

Class ISI mark reputed Brand. Terminal Size: 70 mm X 100 mm length,

Terminal should be made from inner pipe for that pipe must be pressed

and gave rectangular shape so its work as a terminal. The hot deep

galvanising must be done after above process. Galvanised thickness

must be minimum 75 micron anywhere. SS Nut bolt:- 2 nos. with washer

suitable for 14 mm dia. hole must be provided at terminal. Total

minimum Weight (approx.) of earth electrode with inside conductive

material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphur content:- <2% (C) Back fill Compound:- Earthing

compound should be capable to retain moisture for long time. Back

Filling Compound weight is 25 Kg. (D) Chamber and cover:- Earthing

chamber should be size of 400 mm X 400 mm X 400 mm depth and

Cover should be heavy duty cast iron with required size of 300 mm X

300 mm X 4 mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification

only] [OEM has to submit all detail & sample for approved before

supplying]

[Water must be poured in bore before starting earthing. Earthing value

must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing

upto 02 volt. Agency has to maintain earthing & its value for one year.

Earthing must be done in the presence of A.E. (GSPHCL)]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

59A Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte 40.00 Mtr. 56.00 Rupees Fifty Six Only

multi stranded, annealed copper conductor with heat resistant PVC

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, nuts

and bolts if required. [f] One wire 6.00 sq. mm

59B For One wire 16.00 sq. mm 40.00 Mtr. 141.00 Rupees One Hundred Forty One Only

60 Providing and erecting approved make single phase Double Door metal clad 3.00 Each 5869.00 Rupees Five Thousand Eight

D.B. as per relevant indian standards ammended upto date. Supplying and Hundred Sixty Nine Only

fixing following way single phase MCB distrubution board of company fabricated

with sheet box with powder coated inside and outside after apply seven tank

chemical process of CRPA sheet (MCBDB Door, Backside & Body must be

made of 1.2 mm thick CRPA sheet )cover complete with suitable integral single

piece construction tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for mounting MCBDB.

Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-

1 & 3 having D type PU gasket. (2) Seven tank Powder coating Certificate (3)

Tinned Copper/Brass make neutral & Earthing link with isolation & Protecting

Cover for 240 Volts on surface / recess complete with loose wire box, terminal

connectors for all incoming and outging circuits, with suitable size FRLS PVC

insulated copper conductor up to terminal blocks and internal connection, tinned

coppper bus bar, 1 no. tinned copper neutral link, tinned copper earth bar, din

bar, detachable gland plate, interconnections, powder painted including

earthing etc. Single phase incoming and horizontal single phase outgoing. For

16 Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking capacity

of 10 KA), MCB 40 Amp. double pole switch (C curve confirms to IS:8828

having breaking capacity of 10 KA) and S.P. MCB of rating 6 to 32 Amp. with

NL suitable to operate on 240 Volt A.C. power. (6/25 Amp sp mcb rating to be

of same company of MCB / ELCB to be used) (MCBDB must be erected in line

& level with spirit level and finish the external edge with box cutting plaster)

(Same colour MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour radium sticker as

per site requirement and instructions given by EIC on site. Font / number size

given by EIC on site as per requirement]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

61 Providing & erecting Miniature circuit breaker single pole 6 Amp. to 25 3.00 Each 111.00 Rupees One Hundred Eleven Only

Amp. suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark.

62 Providing & erecting 240 V MCB Double pole switch for Motor & 5.00 Each 327.00 Rupees Three Hundred Twenty

Inductive Load (c curve) having 10 KA breaking capacity & confirms to Seven Only

IS:8828 in Existing M.S. box having following capacity. For 40 Amp.

63 Providing and erecting 240 volt MCB double pole switch for motor 2.00 Each 502.00 Rupees Five Hundred Two Only

inductive load(C Curve) having 10 KA Breaking capacity and confirms

to IS : 8828 with same company Metal box with earthing terminal

having following capacity. with necessary quarter Numbering with oil

paint by Painter. (a) 40 Amp Capacity.

64 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load 2.00 Each 730.00 Rupees Seven Hundred Thirty Only

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity [c] 63 Amp.

65 Providing and erecting Approved make ELCBs / RCCBs conforming to 3.00 Each 2213.00 Rupees Two Thousand Two Hundred

IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand Thirteen Only

capacity of 10 KA and suitable for operation on 1 phase and neutral

V having characteristic of quick action & tripping with all advance

feature & do not incorporate any electronic component for following

Max. rating erected as directed with same company metal box with

earthing terminal.Suitable for operation on Single phase 240 Volt max.

rating of (i) For 40 Amp. DP

66 Supplying & fixing box for housing RCCB + MCB combination made of 2.00 Each 442.00 Rupees Four Hundred Forty Two Only

18 SWG sheet steel duly powder coated with gasket, dust & vermin

proof bakelite shield two earthing terminals for following type of RCCB,

RCCB + MCB [b] For 4 pole

67 Dismantling the existing light, fan, bell, independent plug point, wiring 20.00 point 1.00 Rupee One Only

with mains of all types along with accessories etc. complete and handed

over to dept.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

68 Dismantling the existing switchgears, DB and Busbar of any size 5.00 Each 7.00 Rupees Seven Only

complete with / without board or angle iron frame.

69 Dismantling the existing any type of indoor light fittings 10.00 Each 5.00 Rupees Five Only

70 Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket 5.00 Each 9.00 Rupees Nine Only

fan complete with accessories, G.I. down rod, frame etc. and making

the site clear.

Signature of Contractor Executive Engineer

GSPHCL Surat