Repairing & Renovation to E.I. in Judicial Class 3-4 Quarters at Taluka Court Kaprada, Tal. Kaprada, Dist. Valsad. (C1 Block - 3 units, C2 Block - 4 units, B Block - 2 units, A Block - 2 units)

Repairing & Renovation to E.I. in Judicial Class 3-4 Quarters at Taluka Court

Name of work :- Kaprada, Tal. Kaprada, Dist. Valsad. (C1 Block - 3 units, C2 Block - 4 units, B

Block - 2 units, A Block - 2 units)

Qty. Unit. Description. words Unit Amount.

129 Pt. 1 Replacing old & u/s. point wiring by Point wiring for 539.34 #NAME? Pt.

Light / Bell with 2-1.5 sq.mm & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected flushed on

wall/ceiling complete Ca-III

35 Pt. 2 For Toilet Block 269.67 #NAME? Pt.

47 Pt. 3 Replacing old & u/s. fan wiring by Point wiring for 765.58 #NAME? Pt.

FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC /

Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall/ceiling complete Ca-

36 Pt. 4 Replacing old & u/s. Separate Plug by Point wiring for 570.65 #NAME? Pt.

Individual Plug with & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe

erected with following type of accessories.[I] For 6A

Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from

nearby switchboard/mcb db board (a) with medium

class Rigid PVC pipe and accessories erected flushed

on wall/ceiling complete Cat III

62 Pt. 5 Replacing old & u/s. looped plug by Point wiring for 309.06 #NAME? Pt.

on board Looped Plug with 6A Modular type switch &

5 pin socket erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured /

metallic/white front plate modules erected on / in

wall / ceiling with following type accessories. Ca-III

1444 Mtr. 6 Replacing old & u/s. Mains by Providing and erecting 104.03 #NAME? Mtr.

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size. (A) with medium class

Rigid PVC pipe and accessories. (b) 2 wire 2.5 sq. mm

352 Mtr. 7 Replacing old & u/s.Mains by providing and erecting 140.39 #NAME? Mtr.

Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of

following size (A) with medium class Rigid PVC pipe

and accessories.(a) 2 wire 4 sq. mm

256 Mtr. 8 (b) 2 wire 6 sq. mm 184.83 #NAME? Mtr.

40 Nos. 9 Replacing old & u/s. accessories by Providing 180.79 #NAME? Ea.

following type of Modular Type Accessories mounted

with PVC / metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate , modules erected with necessary connections as

per site situation directed by Engineer In charge (9)

Amp. SP one way switch Cat.III

69 Nos. 10 (10) 6/16Amp. Universal socket Cat.III 199.98 #NAME? Ea.

18 Nos. 11 (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole 410.06 #NAME? Ea.

Modular MCB Switch. Cat.III

22 Nos. 12 Replacing old & u/s. Computer board by Providing & 1133.22 #NAME? Ea.

erecting Switch board for Computer or electric

apparatus consisting of following modular type

accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

plate,modules erected with necessary connections as

1 no. 6A/16A universal plug-switch combined.3 nos.

6A Switch 3 nos. 6A 5 pin Plug For Modular Type

Accessories Cat. III

11 Nos. 13 Decorative call bell Ting-tong box type 250 volts 71.71 #NAME? Ea.

complete erected

49 Nos. 14 Replacing old & u/s. tubelights by Supplying and 535.3 #NAME? Ea.

erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with

housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium

die cast powder coated and high U.V. & corrosion

resistance with diffuser with company mark/name

160V to 270V, Power Factor more than 0.9, THD <

15%, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt ,LED LED driver efficiency > 85 % (

fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage

capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(A) Tube Light with integral driver (v) 36-40 Watts,

Surge-2 KV, IP-20, conventional 4 feet Ca-III

35 Nos. 15 Supplying and erecting led lamps with following 112.11 #NAME? Ea.

wattage capacity of 220 to 240 voltage, minimum

15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable

for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat-III

88 Nos. 16 Replacing old & u/s. SP MCB by providing and 123.22 #NAME? Ea.

erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and

having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI

22 Nos. 17 Replacing old & u/s. DP MCB 32 A by Providing & 325.22 #NAME? Ea.

erecting 240 V MCB double pole switch for lighting

Load (B Curve) having 10 KA breaking capacity &

confirms to IS : 8828 in existing box having following

capacity (B) 40 Amp. Ca-III

22 Nos. 18 Sheets steel powder coated enclosure suitable for 176.75 #NAME? Ea.

incorporating One/Two nos. MCB

11 Nos. 19 Replacing old & u/s. DB by Providing and erecting 1492.78 #NAME? Ea.

Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link,

earth bar and DIN rail, Conforms to IS 8623-1 &

IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same

company of MCB to be used) suitable for (A) single

phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43) (iv) 12 way

11 Nos. 20 Providing and erecting Approved make RCCBs 2166.45 #NAME? Ea.

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic

component. for following Max. rating erected as

directed (i) 25 Amps.DP Ca-III

11 Nos. 21 (ii) 40Amps. DP Ca-III 2458.34 #NAME? Ea.

6 Nos. 22 Supplying & erecting earth pit of minimum bore 4591.46 #NAME? Ea.

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron

galvanising, Inner pipe dia of 25 mm having 200-250

Micron galvanising, connection terminal dia of 12mm

with constant ohmic value surrounded by highly

conductive compound with high charge dissipation

suitable for following type of applications with

chamber and heavy duty cover. (A)(approved make

OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed

by agency and officer Incharge has to ensure the value

of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical

(CCM Compound)- Resistivity:- 0.2 ohm / meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphar content:- <2%(C) Back

fill Compound :- Earthing compound should be

capable to retain moisture for long time Necessary test

report must be submitted by Agency. (a) For Electrical

Installation up to 440V in normal soil Length of pipe -

1 Mtr Back filling compound - 1 Nos Bag of 15 Kg.

47 Nos. 23 Replacing Old & U/s. Ceiling Fan by Providing and 1596.81 #NAME? Ea.

erecting Approved make Ceiling fan with double ball

bearing ISI mark with condenser A.C. 23OV.50

c/s.1200 mm. sweep complete, canopy erected on

existing hook or clamp with earthing. [Make shall be

approved by Engineer in charge]

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures

and words) at the estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 677717.07 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

Less Dismental 0.00 Less Dismental

Note 1:-The rates are inclusive ofall taxes, transport charges,storage Charges except GST and

applicable GST Will be paid.(Add GST Extra)

Note 2:-The materials covered under contractor should be got approved from the Deputy Executive

Engineer. In chargeof the work

Note 3:-The materials and work shall have to be used and carried out as specification in

Note 4:-All Works Shall be Carried Out as per Public Works Department hand book and Other

Specification Of The division or as directed

Note 5-Rate are Inclusive Of 1% Labourcess in Tender amount so 1% of total amount of bill will be

Note 5-Rate are Inclusive Of 1% Labourcess in Tender amount so 1% of total amount of bill will be

deducted from the bill

Note-6 TheMaterial to be used in this work should be approved strictly from engineer-in –charge

/Deputy Ex. Engineer as applicable.

Note-7 The Agency will have to agree to carry out the work as per brand demand of concern deptt.

Note-8 An amount of Rs.0.00 (Rs.Nill only ) towards estimated credit value of dismantled materials

shall be recovered from the 1st R.A. Bill of this work.

Signature of Bidder Deputy Executive Engineer

Electrical (R&B) Sub-Division