SPECIAL REPAIRES TO INTERNAL ROAD AT ARUN VIHAR COLONEY AND DWARKA VIHAR IN GANDHINAGAR MIL STN

Amount

M&L for preparing black top surfaces by brushing with wire brushes for removing caked, mud etc, sweeping with brooms and finally fnning the cleaned surface with gunny bags or with compressor air blower to remove all loose dust, dirt etc and applying evenly a tack coat of paving bitumen of VG-10 @ 5 Kg per 10 Sqm using mechanical sprayer complete all as specified and directed.

M&L open graded premixed carpeting 40mm thick using waste plastic (8% by weight of bitumen) quoted aggregate and bituminous binder of grade VG-30 as per IRC SP 98 2013 premixed bituminous carpet 40mm thick open graded composed of 13.2 mm graded size @ 0.36 cum per sqm and 11.2 mm graded aggregate size and 0.18 cum per 10 sqm, preheating aggregates to the required temperature and mixing with 2.336 Kg shredded plastic (8% waste processed plastic by weight shall be used for coating aggregate after heating) and finally mixing with bituminous binder @26.864 per 10 sqm i.e. 92% standard bitumen and all as per IRC SP 98 2013 , laying to required camber and gradient and rolling finishing complete all as specified and as directed.

M&L for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% (paving bitumen VG-30 grade) binder content by weight by total mix, rolled and compacted to required camber and gradient complete using Hot mix plant and mechanical paver and 8 to 10 tonne power road roller complete all as specified

M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc and the like not exceeding 15 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS-3262-1989 with special applicator machine all as per manufacturer's instructions complete all as specified and directed.

M&L Premix bituminous,macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 50mm ) to reqd gradient using paving bitumen any penetration of binder content of 4% (VG-30) by Wt of total mix all as specified and directed.

M&L for premiix sand seal coat with 0.06 cum of sand mixed with 6.8 Kg of bitumen applied and rolled to a uniform smooth surface with 8 to 10 tonne power roller ,complete all as specified and as directed.

Repair to potholes any depth not exc 1 sqm each including sweeping free form dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in deepth, making good by filling in screenes & graded road matel, watering and well ramming (including supply of road matel)

Shree Builders