REPAIR TO ARREST SEEPAGE, LEAKAGE, EXTERNAL PLASTER TO PARAPET WALLS AND REPAIR TO RAIN WATER PIPES, JOINERY, FALSE CEILING ETC IN DOMESTIC AREA AT AF STATION, BAREILLY

Amount

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below or above ground level) complete all as specified and directed.

Demolition of reinforced cement concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

M & L for brick work with fly-ash old size bricks having designation 75 conforming to IS-12894 (2002), straight or curved on plan exc. 6.00 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M & L for taking out existing roof treatment and roughening existing roof surface and providing plain cement concrete, (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in levelling course over roof slab and the like complete all as specified and directed.

Taking down cement or cement lime plaster from brick or stone walls etc. including raking out joints, hacking for keys, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls with cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick cement plaster on fair faces of brick work or concrete surfaces of walls with cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10 mm thick cement plaster on concrete surfaces of ceiling with cement mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M & L for applying Smart Care Damp Proof Ultra fibre reinforced elastometric liquid applied water proofing membrane as in roof treatment @ 1 Litre per 10 Sqft inclusive of all three coats as per following application process: - (a) Prepare the surface by cleaning with high pressure water jet / wire brushes to ensure that it is free of dust, oil, grease, grime and loose particles. (b) Damaged portion if any to be repaired before application of roof treatment as per manufacturer's instructions. (c) Applying self priming coat of Smart Care Damp Proof Ultra duly dialuted with water in 3:1 ratio by volume. Allow the primed surface to dry for at least 3-4 hours prior to application of subsequent coat. (d) Applying 2 perpendicular coats of Smart Care Damp Proof Ultra without any dialution to achieve a forced system coverage. Allow it to dry for at least 4-6 hours between two coats. NOTE: - WORK SHALL BE CARRIED OUT BY THE AUTHORISED APPLICATORS OF THE MANUFACTURER IN CLOSE SUPERVISION OF EXECUTIVE STAFF UPTO ENGINEER-IN-CHARGE LEVEL. MAKE- ASIAN PAINTS, STP LTD.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and directed.

M & L for preparing newly plastered or previously untreated wall surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M & L for preparing newly plastered or previously untreated ceiling surfaces and applying three coats of white wash complete all as specified and directed.

Taking down eaves gutters and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan necks etc. complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed.

S & F of 110 mm bore PVC (SWR) bend any radius complete all as specified and directed.

M & L for 75 mm thick cement concrete (1:2:4) type B-1, (using 20 mm graded stone aggregate) as in plinth protection / hardstanding laid in bays not exc. 1.50 m each, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed complete all as specified and directed.

M & L for 25 mm thick cement concrete (1:2:4) type B-0, (using 12.5 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L for 15 mm thick screed bed or bedding layer in cement mortar (1:6) for laying floor finishes, finished even and rough complete all as specified and directed.

M & L for rendering 10 mm thick cement plaster on fair faces of brick work or concrete surfaces with cement mortar (1:4) finished even and rough as in backing of tiles complete all as specified and directed.

M & L for glazed ceramic coloured tiles of size (450 X 300)mm X 7mm thick as on vertical surface of wall such as skirting, dado, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

M & L for non skid ceramic coloured tiles 7 to 8 mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 sqm, as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tile complete all as specified and directed.

Taking up or down 15 mm bore steel water tubing and connection complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connection complete all as specified and directed.

S&F 15 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S&F 20 mm bore steel water tubing medium grade galvanized with and including all fittings and fixed to walls and ceilings or laid under floors complete all as specified and directed.

S&F 20 mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 210 gram) complete all as specified and directed.

S&F 500 Litre capacity rotational moulded polythene water storage tanks three layered (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part-I and hoisted, fixed in position with and including dismantling of old unserviceable water tank exc. 250 Litre but not exc. 500 Litre capacity complete all as specified and directed.

Disconnecting existing tank exc. 500 Litre but not exc. 1000 Litre capacity, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.

S & F in repair vitreous china white flat back wash hand basin 550 X 440 mm size including 32 mm size chromium plated brass waste coupling alongwith fly nut fully threaded and PVC waste pipe 32 mm dia of suitable length, CI / MS brackets including cutting for and pinning in brackets or fixed with brass screws complete all as specified and directed.

S & F in repairs water closet vitreous china squatting pan ‘Orissa’ pattern size 580 X 440 mm white with and including integral foot rests, cast iron 'P' or 'S' trap, PVC flush pipe of suitable size but excluding flushing cistern and making connections to trap and flushing cistern, anti-syphonic pipe etc. with and including setting the trap and pan in lean cement concrete bedding including making good floor finishes complete all as specified and directed.

S & F in repairs, PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc and S & F of 32 mm dia PVC flush pipe of suitable length, 450 mm long 15 mm size PVC connection, making all connections and making good disturbed surface complete all as specified and directed.

S & F in repairs 15 mm bore long body cast copper alloy chromium plated bib tap, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F in repairs 15 mm bore cast copper alloy chromium plated pillar taps, cast copper alloy, with capstan heads, screwed down, high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nut screwed for iron pipe or brass ferrule complete all as specified and as directed.

S & F in repairs 15 mm bore cast copper alloy chromium plated stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F of 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

M & L for as in replacement of 100 mm dia cast iron floor trap long neck type, without grating including jointing to waste pipe fixed in cement concrete (1:2:4), type B-1 (using 20 mm graded stone aggregate) complete all as specified and directed.

S & F as in repairs 100 mm bore cast iron soil, waste and vent pipe, sand cast, in any length, with or without ears, with cement joints in cement sand mortar (1:1) with spun yarn laid in trenches or under floors complete all as specified and directed.

S & F of 125 mm dia grating doom with waste hole of PTMT (minimum weight 40 gram) complete all as specified and directed.

Taking down chowkhats or frames with shutter (without taking off shutter from the frame) area n exc 1.5 sqm each complete all as specified and as directed.

S & F factory made PVC door frame of size (50 x 47)mm with a wall thickness of 5mm grid PVC sheet mitered at corner and pinned with two members 150mm long brackets of (15 x 15)mm MS Square tube 19 gauge EPDM rubber gasket weathered sheet to be provided through the frame, door frame to be fixed to the wall suing MS screw of 65/100mm size complete as per manufacturer specification.

S&F 30mm thick factory made solid panel PVC door shutter conforming as per IS-4020 made from MS tube of 19 Gauge thickness of size 19 x 19mm style and 15 x 15mm for rail covered with heat moulded PVC channel of 5mm thick and 75mm, 125mm, 125mm wide for top rail, lock rail and bottom rail on either side at 5mm thick 20mm wide cross PVC sheet of gap inserted for top rail and bottom rail, paneling of 5mm PVC sheet fitted in MS frame welded/sealed to the style at rail with 30mm wide, 5mm thick PVC sheet beading sides and jointed together with solvent cement adhesive etc including aluminimum mongry complete all as specified and as directed.

S&F 100mm long stainless steel butt hinges with stainless steel hinge pin ISI marked complete all as specified and as directed.

S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodized, ISI marked complete all as specified and as directed.

S & F 150 mm long aluminium, anodised, barrel tower bolts of extruded section ISI marked complete all as specified and as directed.

Dismantling of ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets and frame work complete all as specified and as directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre for false ceiling size of grid (605 x 605)mm and providing perforated paticle board for insulation and accoustic purposes (600 x 600)mm x 12mm thick in size fixed with staple on snap grid with GI hangers adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat (40 x 3)mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

M&L for complete removal of existing sunken treatment material from sunken floor of any depth in WC and bath complete all as specified and as directed.

M&L for PCC (1:5:10) type E-2 (using 40mm graded brick aggregates) as in filling of sunken floors complete all as specified and as directed.

M&L for applying hot blown grade bitumen in two coats to plastered / concrete surfaces @1.5 kg per sqm per coat complete all as specified and as directed.

M&L for loose filling with aggregates of gauge 40 to 80mm broken bricks in soakage wells, sunken floor of toilets complete all as specified and as directed.

S.K.Enterprises

VINOD TRADING CORPORATION

M/s M Aali construction co