REPAIR TO STEEL FURNITURES AT AF STATION BARRACKPORE, JAFFARPORE AND KANCHRAPARA UNDER GE (AF) BARRACKPORE

Amount

Removal of following existing unserviceable components of various MES FD/DB/TP furniture items or similar items carefully without disturbing the adjoining parts and supply and fix new components in lieu of dismantled components including tightening the joints, welding, pinning, screwing, nailing, glueing, providing hinges, placing every part in-tact and polishing/ painting the disturbed portion, as applicable s per drawings of item No 2.00 to 7.02 here in below. Note:- Work will be executed in different User units of GE (AF) Barrackpore including BSO's Furniture Yard as directed by Engineer-in-Charge.

Almirah Large Steel with shelves/ Almirah steel small with shelves FD-67(M), FD-1031, FD-1032

3-Way locking system for Almirah Large Steel with shelves as per drawing

3-Way locking system for Almirah small Steel with shelves as per drawing

Handle as per drawing

Leg as per drawing

Door for Almirah Large Steel with shelves as per drawing

Door for Almirah small Steel with shelves as per drawing

Shelf as per drawing

MS Lock as per drawing

Clamp for fixing and adjustment of shelves as per drawing

Door hinges as per drawing

Chair Steel Tubular with Arms FD-75

Seat frame duly canned with cane of size 2mm wide and 0.4mm thick gola type weighing not less than 6gms per 10 RM as per drawing

Back frame duly canned with cane of size 2mm wide and 0.4mm thick gola type weighing not less than 6gms per 10 RM as per drawing

Arm rest as per drawing

Hard rubber shoes as per drawing

Rubber cap for conduit pipe as per drawing

Flat iron strips for seat/back as per drawing

Chair Steel Tubular without Arms FD-75

Seat frame duly canned with cane of size 2mm wide and 0.4mm thick gola type weighing not less than 6gms per 10 RM as per drawing

Back frame duly canned with cane of size 2mm wide and 0.4mm thick gola type weighing not less than 6gms per 10 RM as per drawing

Hard rubber shoes as per drawing

Rubber cap for conduit pipe as per drawing

Flat iron strips for seat/back as per drawing

Chair CBA special steel with hand rest FD-120(M)

Writing pad as per drawing

Rear/Front leg as per drawing

Seat frame duly canned with cane of size 2mm wide and 0.4mm thick gola type weighing not less than 6gms per 10 RM as per drawing

Back frame duly canned with cane of size 2mm wide and 0.4mm thick gola type weighing not less than 6gms per 10 RM as per drawing

Hard rubber shoe as per drawing

Charpoy GI Pipe FD-220

Long rail as per drawing

Short rail as per drawing

Legs as per drawing

MS Check nut as per drawing

Three-way elbow as per drawing

Conversion of long rail into one short rail and one leg in repair from dismantling of charpoy GI pipe here in before and fixing the same as required and directed by Engr-in-Charge. Note:- Long rail obtained after dismantling from item No 6.01 shall be used under this item.

Conversion of short rail into one leg in repair from dismantling of charpoy GI pipe here in before and fixing the same as requied and directed by the Engr-in-Charge. Note:- Short rail obtained after dismantling from item No 6.02 shall be used under this item.

12mm thick BWR grade plywood for top of charpoy GI pipe as required and directed by Engr-in-Charge

MS flat size 40x6x900mm in between the existing long rails to support ply top

Chair Verandah FD-19(M), FD-259, FD-359

Removal of existing old unserviceable plastic cane from the chair and and recanning the same with cane of size 2mm wide and 0.4mm thick gola type weighing not less than 6gms per 10 RM as specified in drawing and as directed by Engr-in-Charge

Hard rubber shoe for leg as per drawing

Chair Steel Tubular with / without Arms- FD-75, Chair CBA special steel with hand rest FD-120(M), Chair Verandah FD-19(M), FD-259, FD-359

Removing the existing unserviceable cane and recaning the same with new plastic cane of size 2mm wide and 0.4mm thick gola type weighing not less than 6gms per 10 RM complete all as per specified and directed by Engineer-in-charge.

Material and labour for painting of two coat of paint OG/black/white or whichever is reqd to the following furniture articles of item No 9.01 to 9.07 including applying putty for depressed surface before painting all as specified, shown on drawings and directed by Engineer-in-Charge. Work will be executed where the furniture exist in different User Units at OTM/Md Accn under the jurisdiction of GE(AF) Barrackpore including BSO's Furniture Yard as directed by Engineer-in-Charge. Note:- Painting shall be done by spray machine.

Almirah Large Steel with shelves FD-67(M), FD-1031

Almirah steel small with shelves FD-67(M), FD-1032

Chair Steel Tubular with Arms FD-75

Chair Steel Tubular without Arms FD-75

Chair CBA special steel with hand rest FD-120(M)

Chair Verandah FD-19(M), FD-259, FD-359

Table dining ORs FD-165(M)

BANERJEE CONSTRUCTION

PIONEER

M/S NEHAL ENTERPRISES

M/S CHANDER SHEKHAR