Special Repair to Town Police Station at Balasinor Dist Mahisagar (Including Electrification) [2nd Attempt]

Name Of Work :- Special Repairs to Town Police Station at Balasinor,Dist-Mahisagar. (Incl. Electrification.)

Statement showing the approximate quantities for the items of the above work to be carried out and approximate cost put to tender for

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings and clamps

Rupees Seventy Five And

1 including stacking the materials with all lead and lift ( for any dia, of pipe) 101.00 Rmt. 75.92

Paise Ninety Two Only

Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas and

Rupees Forty Eight And

2 disposal of unserviceable materials with all lead and lift. 422.00 Smt. 48.63

Paise Sixty Three Only

Removing and scraping of old deteriorated plaster of any thickness fromm wall /

R.C.C member including stacking of serviceable material and disposal of unserviceable Rupees Nineteen And Paise

from site of work with all lead and lift. Sixty Nine Only

Removing and refixing after repairing door,window,cup board,ventilator shutter & repair frame Rupees Three Hundred

4 with providing necessary wood corner M.S. plate support,hinges etc.complete. 22.30 Smt. 321.78 Twenty One And Paise

Seventy Eight Only

Removing dry or oil bound distemper by a washing and scraping and sand papering the

Ceiling or Sloping roofs surface smooth including necessary repairs to scratches complete. Rupees Thirteen And Paise

Removing dry or oil bound distemper by a washing and scraping and sand papering the

Wall surface smooth including necessary repairs to scratches complete. Rupees Eleven And Paise

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials Rupees One Hundred Twenty

7 and disposing off the excavated stuff upto any lead.(A) Loose or soft soil 19.80 Cum. 121.72 One And Paise Seventy Two

Provinding and fixing M.S. GRILL/GATE fabricated from MS Flat, Square bars , Round bars,

plates as per details including welding and two coats of oil paints on a primer coat of approved Rupees Seventy Five And

shade and quality etc. complete.(M.S. Shall be ISI Mark Only.) Paise Six Only

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering

Rupees Two Hundred

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) Including Finishing with a Floating

9 5.50 Smt. 221.63 Twenty One And Paise Sixty

Coat of Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at GROUND

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing 10 mm thick cement PLASTER in single coat on ceilings for interior plastering

and finished even & smooth in C.M. 1: 3 ( 1 cement : 3 sand ) Including Finishing with a Floating Rupees Two Hundred Forty

Coat of Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About) at FIRST FLOOR. Eight And Paise Eleven Only

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for

Rupees Two Hundred

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Including

11 24.50 Sqm. 223.77 Twenty Three And Paise

Finishing with a Floating Coat of Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick

Seventy Seven Only

About) at GROUND FLOOR.

Provinding 15 mm thick cement PLASTER in single coat on brick or concrete wall for

Rupees Two Hundred Fifty

interior plastering and finished even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Including

12 26.10 Sqm. 252.24 Two And Paise Twenty Four

Finishing with a Floating Coat of Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick

About) at FIRST FLOOR.

Provinding 20 mm thick SAND FACED cement PLASTER on walls above ground level consisting Rupees Three Hundred Forty

13 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thock finishing coat of C.M. 16.00 Sqm. 342.33 Two And Paise Thirty Three

1:1 ( 1 cement : 1 sand ) etc. Complete for any height. Only

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive including dismentaling of existing flooring and Rupees One Thousand Six

14 material jointed with color cement slurry including finished with flush pointing & cleaning the 48.00 Smt. 1649.60 Hundred Forty Nine And

surface etc. complete. Size & Shade of tiles shall be as per Approved Architecture Paise Sixty Only

drawing & as per direction of Engineer in charge.

Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile for

skirting,risers of steps and dedo over10 mm (average) base of cement mortar 1:3 (

cement: 3 coarse sand) on new surface orfixing on existing flooring by adhesive including Rupees One Thousand Four

15 dismentaling of existing flooring and material jointed with color cement slurry including finised 3.05 Smt. 1445.20 Hundred Forty Five And

with flush pointing & cleaning the surface etc. complete. Size & Shade of tiles shall be as Paise Twenty Only

per Approved Architecture drawing & as per direction of Engineer in charge.

Providing & Laying 24" x 24" Antiskid Vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing

Rupees One Thousand Four

flooring by adhesive including dismentaling of existing flooring and material jointed with

16 3.25 Smt. 1453.19 Hundred Fifty Three And

color cement slurry including finished with flush pointing & cleaning the surface etc. complete.

Paise Nineteen Only

Size & Shade of tiles shall be as per Approved Architecture drawing & as per direction of

Engineer in charge.

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Provinding & laying Printed / Coloured Glazed 8mm thick TILES in skirting, risers of

steps and DADO on 10mm thick cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed Rupees One Thousand Four

17 with white cement slurry. ( Size of Tiles shall be 600 mm x 300mm ). Size & Shade of tiles 29.00 Smt. 1473.50 Hundred Seventy Three And

shall be as per Approved Architecture drawing & as per direction of Engineer in charge. Paise Fifty Only

Providing and laying integrated cement based proprietary water proofing treatment of

required thickness over the roof including providing and applying two coat of Acrylic polymer of

approved brand & manufactures and china mosaic fitting and finally finishing the surface with

white cement slurry and sloping out terrace slabs with following specification laid to required

slope not flotter than 1 : 80 (incl treating the vertical surface of the perapet wall upto 20cms height

above finished level of terracing including finishing, curing, testing etc. comp. Rate is incl. Ten

years performance of guarantee bond to be given on stamp paper. (No extra shall be paid for

increase in thickness for proper slope). (a) Applying two coats of Acrylic based polymer of Rupees Five Hundred Ninety

18 approved brand & manufacture as per recomodation of manufacturer over the R.C.C. Slab 344.00 Smt. 595.97 Five And Paise Ninety Seven

incl. clearing the surface before treatment. (b) Finishing the surface with China Mosaic pieces Only

laid on 10mm thick joint less cement mortar of mix 1:3 (1 cement : 3 coarse sand) admixed with

proprietary water proofing compound conforming to IS :2645 and finally finishing the surface with

trowel with neat cement slurry. (c) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing for final test.All above operations to be done in

order and as directed and specified by the engineer - in - charge.

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having

Rupees Two Hundred Six

National Sanitation Foundation (NSF) seal For Portable Water of

19 20.50 Rmt. 206.73 And Paise Seventy Three

mm. dia. nominal bor tube fitting and clamps including making good the wall, ceiling and

floor etc. Complete

Providing & fixing Concealed Center Point to wall celing & floor CPVC (SDR-13.5) PIPE having

Rupees Two Hundred Fifty

National Sanitation Foundation (NSF) seal For Portable Water of

20 55.00 Rmt. 251.31 One And Paise Thirty One

mm. dia. nominal bor tube fitting and clamps including making good the wall, ceiling and

floor etc. Complete

Providing & fixing Concealed center point to wall celing & floor CPVC (SDR-13.5) Pipe having

National Sanitation Foundation (NSF) seal for potable water of 40mm dia. Nominal bore Tube

fittings & clamps with All as per required fittings such as reducing coupler, union, band plug, Rupees Four Hundred Forty

21 end cap, tee, hex niple, elbow, coupler including All Labour Charges etc. complete with using 99.50 Rmt. 443.29 Three And Paise Twenty

bonding materials. Rates are including of making good the wall ceiling & floor etc. complete. Nine Only

(excavation of earth in trenches and filling will be paid separately).

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia Rupees Four Hundred

22 5.00 Nos. 416.47 Sixteen And Paise Forty

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Rupees Six Hundred Fifty

23 3.00 Nos. 656.86 Six And Paise Eighty Six

Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe with 'O' ring 110mm

dia of ISI 13592/92. Rate inclusive of all fittings like single or double "Y" with door,

Rupees Four Hundred Ninety

reducer, coupler single T with door bend, Including G I slotted Z Patti (1.6 mm

24 36.50 Rmt. 495.91 Five And Paise Ninety One

thick) with 6 mm dia U clamp with washer for vertical drain etc. complete and

making good the wall,ceiling and floor.ISI make only joints shall be sealed by pipe

Providing and fixing to wall,ceiling and floor U.PVC/SWR soil waste pipe with 'O' ring 75mm

dia of ISI 13592/92. Rate inclusive of all fittings like single or double "Y" with door, reducer,

Rupees Two Hundred Sixty

coupler single T with door bend, Including G I slotted Z Patti (1.6 mm thick) with 6 mm dia

25 36.50 Rmt. 264.97 Four And Paise Ninety Seven

U clamp with washer for vertical drain etc.complete and making good the wall,ceiling and

floor.ISI make only joints shall be sealed by pipe sealant

P & F to Wall Ceilling and Floor SWR Rain Water pipe as Per IS-13592 of 90mm Dia

Complete with Special flings, Compressor type Fittings, Including G I slotted Z Patti (1.6 mm

Rupees Three Hundred

thick) with 6 mm dia U clamp with washer for vertical drain etc. including making good the

26 66.50 Rmt. 323.15 Twenty Three And Paise

ceiling and floor on terrace rain water pipe shall be 90 mm Dia. SWR horizontal pipe and vertical

pipe and 90mm bend at the end near by Ground level rate are Inclusive of all Necessary Fittings

Provinding and Fixing in position UPVC / SWR cowel vent to pipe 75 mm dia as directed. Rupees Sixteen And Paise

Forty Seven Only

Provinding and Fixing in position UPVC / SWR cowel vent to pipe 110 mm dia Rupees Twenty Eight And

as directed. Paise Sixteen Only

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100mm diameter with jali of the

Rupees Five Hundred Eighty

29 following nominal diameter of self cleansing design with C.I scread down or hinged grating 2.00 No. 580.47

And Paise Forty Seven Only

including the cost of cutting and making good the walls.

Provinding and fixing 600mm x 450mm bevelled edge MIRROR or superior glass mounted on

Rupees Eight Hundred Fifty

30 6mm thick A.C. sheet of plywood sheet fixed to wooden plugs with 4.00 No. 850.90

And Paise Ninety Only

C.P. brass screws & washers.

Providing & Fixing Towel Ring. Rate are inclusive of all matreials, Labour & Necessary

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Rupees Nine Hundred Nine

Engineer In charge. The Model & Make of Towel Ring Shall be as per the Approved Make List of And Paise Eight Only

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing & Fixing Towel Rod. Rate are inclusive of all matreials, Labour & Necessary

Rupees One Thousand

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of

32 3.00 No. 1078.70 Seventy Eight And Paise

Engineer In charge. The Model & Make of Towel Rod Shall be as per the Approved Make List of

Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. C.P. brassa waste coupling

with Connection 32mm dia waste Pipe etc. Complete. Rate are inclusive of all matreials, Labour Rupees Two Thousand

33 & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the 1.00 No. 2098.98 Ninety Eight And Paise

Instruction of Engineer In charge. The Model & Make of Urinal Shall be as per the Approved Ninety Eight Only

Make List of GSPHCL.

Providing & Fixing Pillar Cock. Rate are inclusive of all matreials, Labour & Necessary

Rupees Nine Hundred

Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of

34 4.00 No. 976.73 Seventy Six And Paise

Engineer In charge. The Model & Make of Pillar Cock Shall be as per the Approved Make List of

Seventy Three Only

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are inclusive of all

matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Rupees Nine Hundred Ninety

Specifications and as per the Instruction of Engineer In charge. The Model & Make of Bib And Paise Sixty One Only

Tap Shall be as per the Approved Make List of GSPHCL.

Providing & Fixing Angle Cock with Wall Flange . Rate are inclusive of all matreials,

Rupees Six Hundred Sixty

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per

36 5.00 No. 665.51 Five And Paise Fifty One

the Instruction of Engineer In charge. The Model & Make of Angle Cock Shall be as per the

Approved Make List of GSPHCL.

Providing and fixing chromium plated brass half trun flush cock of approved quality

Rupees Two Hundred Sixty

37 including fixing in pipe line etc. complete.(ii) 25mm dia. 6.00 No. 261.16

One And Paise Sixteen Only

Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop Surface (two

coats) to give an required shap even shade after throughly brushing the surface to

remove all dirt and remains of loose poweder material etc. complete. Rate are inclusive of

applying two coat of lapy (Putty) and one coat of primer on new Ceilling/Slop Surface to Rupees One Hundred Ninety

give and even shade including thoroughly brushing the surface free from mortar dropping And Paise Forty Three Only

and other foreign matter and sand papered smooth. Fine Putty, primer, plastic

Emulsion Paint Shall be used as per approved material list by GSPHCL. (For All

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to give an

required shap even shade after throughly brushing the surface to remove all dirt and remains

of loose poweder material etc. complete. Rate are inclusive of applying two coat of lapy (Putty) Rupees One Hundred

39 and one coat of primer on new wall surface to give and even shade including thoroughly 1,065.00 Sqm. 179.92 Seventy Nine And Paise

brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. Ninety Two Only

Fine Putty, primer, plastic Emulsion Paint Shall be used as per approved material list

by GSPHCL. (For All Floor)

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) over and

above applying One Coat Of Primer to give an required shape even shade after thoroughly

Rupees One Hundred Fifty

brushing the surface to remove all dirt, and remains of loose powdered

40 799.00 Sqm. 153.35 Three And Paise Thirty Five

materials.etc complete. primer,Exterior Emulsion Paint Shall be used as per

approved material list by GSPHCL. (For any Height)

Painting Two coats (excluding priming coat) on previously painted wood and wood based surface

with enamel paint, to give an even shade including cleaning the of all dirt, dust and other foreign Rupees One Hundred Fifteen

matter. Oil Paint Shall be used as per approved material list by GSPHCL. (For any Height) And Paise Fifty Six Only

Painting Two coats (excluding priming coat) on previously printed steel and other metal surface

with synthetic enamel paint, brushing to give an even shade including cleaning the surface of Rupees Ninety Eight And

all dirt, dust and other foreign matter. Oil Paint Shall be used as per approved material list by Paise Fifty Nine Only

GSPHCL. (For any Height)

Provinding and fixing SW gully trap with out CI grating brick masonary chamber and water tight

Rupees One Thousand One

CI cover with frame of 300*300mm size inside with standard weight (I) Square mouth traps

43 6.00 No. 1176.94 Hundred Seventy Six And

©150*100mm size P or R type

Paise Ninety Four Only

Construction brick masonary chamber for underground C.I.inspection chamber and

bends with brick having crushing strength not less than 35 kg/cm2 in C:M 1:5 R.C.C.

top slab with 1:2:4 mix (1 cement; 2 coarse sand; 4 graded stone aggregate 20mm nominal

size ) with 8mm dia steel at 15 cm.c/c and providing and fixing precast MD-10 Ton R.C.C.

Rupees Three Thousand

cover size 0.60 x 0.45 x 0.07 m with frame and foundation concrete 1:5:10 inside plaster

44 7.00 No 3793.18 Seven Hundred Ninety Three

15mm thick with cement with a floating coat of neat cement walls and bed concrete

And Paise Eighteen Only

etc. complete .Rates are also inclusive of outside plaster 15mm thick in C:M 1:3 from top of

chamber and all side upto 45 cms. deep below ground level. (A) Inside dimension

455mmx610mm and 450mm deep for Single or Multi purpose pipe line.

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Construction brick masonary chamber for underground C.I.inspection chamber and

bends with brick having crushing strength not less than 35 kg/cm2 in C:M 1:5 R.C.C.

top slab with 1:2:4 mix (1 cement; 2 coarse sand; 4 graded stone aggregate 20mm nominal

size ) with 8mm dia steel at 15 cm.c/c and providing and fixing precast MD-10 Ton R.C.C.

Rupees Five Thousand Four

cover size 0.60 x 0.45 x 0.07 m with frame and foundation concrete 1:5:10 inside plaster

45 7.00 No 5476.93 Hundred Seventy Six And

15mm thick with cement with a floating coat of neat cement walls and bed concrete

Paise Ninety Three Only

etc. complete .Rates are also inclusive of outside plaster 15mm thick in C:M 1:3 from top of

chamber and all side upto 45 cms. deep below ground level. (A) Inside dimension

600mmx850mm and 450mm deep for Single or Multi purpose pipe line.

Extra over above item 44 for additional depth 0.1 mt. or part thereof beyond 450mm depth Rupees Two Hundred Thirty

46 for brick masonary chamber for 455mm x 610mm size. 3.00 No 239.99 Nine And Paise Ninety Nine

Extra over above item 45 for additional depth 0.1 mt. or part thereof beyond 450mm depth Rupees Three Hundred

47 for brick masonary chamber for 600mm x 850mm size. 5.00 No 322.37 Twenty Two And Paise

Thirty Seven Only

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe

with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage &

Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to the departmental

stores etc. complete. (100 mm ID Dia) Including Lowering, laying and jointing of class SN

structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with one end of pipes, sliding Rupees Two Hundred

48 over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the 6.00 Rmt. 229.00 Twenty Nine And Paise Zero

spigot end, lowering the same into the trench, laying on the lower bedding (constructed at Only

bottom of trenches) at prescribed gradient,depth & alignment ,testing the water tightness of

the joints, ensuring the continuity tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes & fittings from site

stacks to the place of laying etc. as per direction of Engineer-in-charge.(Pipe shall be of Approved

Make list of GSPHCL) (100mm Dia.)

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems (Pipe

with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure underground Sewerage &

Drainage application as per EN:13476-3 including all local and central taxes, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance to the departmental

stores etc. complete. (150 mm ID Dia) Including Lowering, laying and jointing of class SN

structured wall ( External Annular Corrugated & Smooth Internal surface) Polyethylene Piping and

fittings with the help of coupler ( on line / off line ) attached with one end of pipes, sliding Rupees Three Hundred

49 over the elastomeric sealing rubber ring placed on the specified valley of the corrugation at the 64.00 Rmt. 396.00 Ninety Six And Paise Zero

spigot end, lowering the same into the trench, laying on the lower bedding (constructed at Only

bottom of trenches) at prescribed gradient,depth & alignment ,testing the water tightness of

the joints, ensuring the continuity tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes & fittings from site

stacks to the place of laying etc. as per direction of Engineer-in-charge.(Pipe shall be of

Approved Make list of GSPHCL) (150mm Dia.)

Providing and fixing PVC waste water pipe with waste coupling for w.b. and kitchen sink. Rupees Fifty Two And Paise

For 32mm dia Fifty Four Only

Providing and Fixing 3mm thick FRP fiber sheet with net multi wall roofing sheet fixed with Rupees Six Hundred Sixty

51 hooks, bolts,nuts,rubber silicon sealer and fixing any height etc complete as per approved 10.50 Smt. 669.44 Nine And Paise Forty Four

drawing a direction given by Engineer in Charge. Only

Job work for cleaning of Existing Septic Tank with Vaccum Cleaning M/C. with all slug removing Rupees Seven Thousand And

Credit value for old partly pannelled & partly glazed window shutter and removed from site and

(Rupees One Hundred Fifty

Credit value for old G.I. Pipe of any dia meter and removed from site and clean site. (Rupees Ten And Paise

Thirty Four Only)

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing and fixing Point wiring with 1.1 KV grade ISI marked approved make 2 x 1.5 sq.mm

copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire for

earth continuity in FIA approved ISI mark white colour medium class 20/25 mm dia. embossed

rigid PVC pipe erected flushed on wall/ceiling complete with company fabricated Metal Groove

PVC fitting fixed with adhesive solution erected On wall along with continuous G. I. fish wire to

draw wires complete with approved make 5/6 Amp. tissino type switch and accessories mounted RS: Three Hundred

On Metal / PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated Fifty One only

sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directed as directed for future

extention , if required agency has to erect one higher size box & plate as per instruction of EIC. cost

of blank plate shall be paid as per tender itemFor Light Point-In medium class Rigid PVC pipe and

accessories erected on wall/ceiling complete

For Bell Point . RS: Three Hundred

For Fan Point-- in medium class Rigid PVC pipe and accessories erected on wall/ceiling complete RS: Three Hundred

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI Make)--In medium class RS: Three Hundred Ten

Rigid PVC pipe and accessories erected on wall/ceiling complete only

For loop on switch board (with 6 Amp. Switch & 3/5 pin socket both having ISI Make)

55E 21.00 Point 66.00 RS: Sixty Six only

For 16 Amp. on switch board (with 16 Amp. Switch & 3/5 pin socket both having ISI Make) RS: One Hundred Sixty

Point wiring for independent PLUG with following size mains earth wire of 1.5 sq.mm (green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires upto 10 mt length,

in following below of pipe erected complete with ISI marked 3 / 5 Pin socket and tissino type

RS: Four Hundred

56 switch erected with earth continuity connection erected on Metal / PVC/Wooden box covered with 14.00 point 489.00

Eighty Nine only

3 mm thick PC(Polycarbonate) / Acrylic/Laminated sheet. [B] 6/16A Plug and 16 amp switch with

2-2.5 sq. mm Cu. Mains from mcb d b boards.

Providing & erecting Modular type accessories mounted on 20G. company Fabricated Galvanised

RS: One Hundred Fifty

57A Metal box covered with appropriate front plate modules erected flushed with wall / ceiling with : 1.00 Each 159.00

TV Co-axial Socket Outlet.Cat-III

Modem Jack for Computer Open RJ-45 . RS: One Hundred Fifty

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing and Erecting following size of TV Co-axial flexible cable comprising inner conductor of

solid bare copper insulated with Foam PE & Secondary conductor made of poly – Aluminium film

bonded Al. Braids @ coverage of 65% overall sheated with black PVC insulation. JOINT NOT RS: Thirty Nine

ALLOWED (FINOLEX/RRCABLE/POLYCAB/ HAVELLS)a. RG-6 only

Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 1.1 KV grade In Existing

FIA approved ISI mark medium class 20/25/32 mm dia. embossed rigid PVC pipe with PVC

fitting fixed with adhesive solution to be erected on/in brick wall / slab along with continuous G. I.

fish wire to draw mains laid in approved manner with plastering by cement mortar & finishing the

59A surface to match the wall / ceiling complete with FRLS PVC insulated wire for earth continuity. 800.00 Mtr. 46.00 RS: Forty Six only

(Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded conductor mains with

sq.mm. FRLS copper multi stranded conductor for earthing as per standard colour code.In

Existing Pipe/casing capping [Wire must be having box packing]

[b] 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS copper

59B multi stranded conductor for earthing as per standard colour code.In Existing Pipe/casing capping 340.00 Mtr. 62.00

[Wire must be having box packing]

For 2 X 6.0 sq.mm. copper multi stranded conductor mains with 2.5 sq. mm copper multi stranded

RS: One Hundred

59C conductor earthing as per standard colour code In ExistingIn Existing Pipe/casing capping [Wire 330.00 Mtr. 120.00

must be having box packing]

For 4 X 6.0 sq.mm. copper multi stranded conductor mains with 2.5 sq. mm copper multi stranded

conductor earthing as per standard colour code In ExistingIn Existing Pipe/casing capping [Wire RS: Two Hundred

must be having box packing] (For Three phase DB /GEB meter to DB) Thirty Eight only

Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible pipe with necessary socket, RS: Thirty Seven

PVC bushes saddle, Check-nuts etc. complete of following sizes. only

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing & Erecting 2.0 mtr long Earthing system by making minimum bore of 225 mm dia in

soft soil. Suitable for doing pipe-in-pipe technology earthing.Earthing electric rod must be made

from Corrosion free Hot dip galvanizing pipes having following specification.

(A)(A) Earthing Electrode: outerpipe:- 88mm minimum O.D ,ISI 'B ' Class ISI mark of Reputed

Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class ISI mark reputed Brand Terminal Size:

70mm X 100mm length, Terminal Should be made from inner pipe for that pipe must be pressed

and gave rectangular shape so its work as a terminal.The hot deep galvanising must be done after

above process.Galvanised thickness must be minimum 75 micron any where. SS Nut bolt:-

no.with washer suitable for 14mm dia. hole must be provided at terminal. total minimum RS: Seven Thousand

Weight(approx.) of earth electrodewith inside conductive material minimum should be 26kg. Twenty Five only

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter testing as per IEC 62561-2017,

Voltage drop:- < 1 volt at no load & dry form, Sulphar content:- <2%

(C) Back fill Compound :-Earthing compound should be capable to retain moisture for long time

Back Filling Compound weight is 25 Kg. Necessary test report must be submitted.

(D) Chamber and cover :-Earthing chamber should be size of 400mmX400mmX400mm depth and

Cover should be heavy duty cast iron with required size of 300mmX300mmX4mm thick.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail & sample for approved

before supplying

Water must be poured in bore before starting earthing. Earthing value must be measured with earth

tester. Agency has to bring the earth resistance to at least 02 ohms & voltage between neutral

&Earthingupto 02 volt. Agency has to maintain earthing& its value for one year. If required.

Earthing must be done in the presence of A.E (GSPHCL)

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms to IS:694, IEC - 227 erected in

RS: One Hundred Forty

62 existing pipe of following size (Specifically for control panel, relays, power switchgears, motor 50.00 Mtr. 141.00

starters & control wiring) with required size of copper lugs, nuts and bolts if required. [f] One

wire 16.00 sq. mm

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Supplying and Erecting LED indoor fitting of approximately 4feet long with LED of wattage 0.2W

to 0.5W assemble on single MCPCB with housing use as a heat sink shall be made from Aluminum

extrusion having enough strength (sample must be approved by EIC)with polycarbonate diffuser

with following specification:

(A) Company mark/name on the fitting.(B) Rated input voltage and frequency: 220V to 240 VAC ;

50Hz.(C) Rated input wattage: max. 24w(D) Rated input current : 0.2 Amp(E) Power Factor : Min.

0.90(F) ATHD :Max. 15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT: 6500K(I) CRI: Min.

80Ra(J) Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @ L70(L) Over Voltage

RS: Three Hundred

63 protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge protection : Min. 2KV(N) IP rating: IP 30.00 Each 370.00

20(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be provided(Q) Fixing clamp

design & strength should be sufficient to hold the fitting erected on wall or ceiling.(R) 3 core copper

wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture As Anne-T) [Approval will be given strictly

subject to item specification]

Supplying and erecting 8 W LED lamps with following wattage capacity of 220 to 240 voltage,

minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, RS: One Hundred

mounting suitable for E14 / E27 / B22 lamp holders, pf >= 0.5 (A) LED Lamps integral type, with Eleven only

PC diffuser suitable LAMP holder

Providing and erecting Decorative musical call bell Stereo type 250 Volt complete erected on

RS: One Hundred

65 existing polished wooden block or in M.S. box with 3mm thick white ISI mark laminated sheet. 1.00 Each 170.00

Providing and erecting Polycarbonate body surface mounting LED Bulk head type 9/10 watt

Lighting Fitting with electronic driver having THD < 15%, CRI>80, P.F.0.95 And lumen

output from luminaire 720 lm, input voltage range 160-270 V AC, 50 Hz cool white (3000 RS: Seven Hundred

to 6500 k), inbuilt driver having efficiency >=80lm/w, -20 deg C to + 60 deg C working Eighty only

temperature, AL frame with Beam Angle 120 deg.( Helonix make and model No. HLBH-

Providing and erecting METALIC DANGER NOTICE BOARD for medium voltage installation to RS: Sixty Nine

be erected as per IS. only

Providing and erecting Medium Class FIA approved and ISI mark white colour (embossed) RIGID

PVC PIPES of following size complete erected with necessary PVC fittings & Junction boxes fixed

RS: Twenty Four

68 with adhesive solution & clamps on / in wall / ceiling along with continuous fish wire to draw mains 850.00 Mtr. 24.00

with necessary fittings and junction boxes for following dia. (a) 20 mm. dia.

For 25MM RS: Thirty Three

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked approved make 2 x

sq.mm copper PVC insulated FRLS wire with 1.5 sq.mm (green) copper PVC insulated FRLS wire

for earth continuity in Existing FIA approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected On brick wall

along with continuous G. I. fish wire to draw wires complete with 16 Amp Modular type Swich and

accessories mounted in 20 G. GI company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall. (a) 16 Amp Indicator switch & 1 No. 6/16 A RS: Five Hundred

universal socket white colour suitable for 3 pin top duly both having ISI mark. Twenty Six only

(Necessary Sheet Must Be Erected On All Box To Prevent Mortor Going In To The Box)

Cat.-III in existing In Existing Pipe/casing capping erected flushed on wall/ceiling

Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv grade 2 x 4.0 sq.mm

copper PVC insulated FRLS wire with 2.5 sq.mm (green) copper PVC insulated FRLS wire for

earth continuity in Existing FIA approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution erected On brick wall along

with continuous G.I. fish wire to draw wires complete with approved make 16 Amp. Modular type

switch and accessories mounted in 20 SWG GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall / ceiling. (a) 16 Amp Indicator switch RS: Six Hundred Sixty

& 1 No. 6/16 A universal socket white colour suitable for 3 pin top duly both having Two only

ISI mark. (A.C POINT ONLY) (Necessary Sheet Must Be Erected On All Box To

Prevent Mortor Going Into The Box) CAT III In Existing Pipe/casing cappingerected

flushed on wall/ceiling complete

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing, erecting, testing ceiling Fan confirming to IS: 374/1979 AMDT No. 1 to 6 Class-I,

Hz. Specification of Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2) Operating Voltage:

180 to 230 V, (3) Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM:

minimum 330, (6)Service value:min 4.3 m3/mtr, (7) Class of insulation: 'B', (8) No. of heavy duty

premium quality Ball bearing: Two, (9) Total Body: Top & Bottom should be alluminium, (10)

Blade: Aluminium approx 1.1 mm thick, (11) Colour: White high grade powder coating, (12)

RS: One Thousand Nine

Canopy: Two Nos. Heavy duty, (13) Condenser: Min. 1.5 MFD (15% tolerance) as per IS 1709-

72 20.00 Each 1929.00 Hundred Twenty Nine

1984 AL body Branded make,(14) Down road: up to 1.0 mtr as per site tequirment, (15) Required

fixing accessories, (16) 3 core 0.75sq.mm wire as per site requirment,(17) no vibration and noise

due to mechanical parts.(18) Necessary saftey wire should be erected with fan for safety & checked

with EIC (OEM has to approved model as per tender specification and tested at ERDA)

Supplying and erecting approved make oscillating type bracket fan A.C. 230 V. 50 cy/s 400/450

mm sweep wall mounted with height adjustment and rotary tilting device complete with guard, RS: Two Thousand Five

flexible Core plug top complete erected with lead wires as directed. Hundred Nine only

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with RS: Ninty Eight

necessary hook of 10 mm M.S. Round Bar. only

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing and erecting Approved make 16 Way single Door metal clad D.B. company

having Incoming MCB DP 40 Amp. 30 mA double pole ELCB (ELCB confirming to

IS:12640/1988 having sensitivity of 30 mA and breaking capacity of 10 KA), 40 Amp. DP

MCB (C curve) and 12 Nos. S.P. MCB of rating 6 to 32 Amp. with NL suitable to operate

on 230 Volt A.C. power and having overload and short circuit tripping element breaking

capacity 10KA to be erected in flush type and company fabricated 16 G.M.S./IK

Certificate sheet box with powder coated inside and outside after apply seven tank

chemical process of M.S. sheet cover complete with suitable integral single piece

construction tinned copper busbar- and link with all necessary interconnection.and with

necessary size wooden board for mounting MCBDB. Manufacturer must be Provided. (1)

IP 43 protection Certificate (2) Seven tank Power Coating. (3) Coppper/Brass make

Neutral & Earthing link with isolation and Protecting Cover. For 16 Way MCBDB with RS: Four Thousand Nine

I/c:-40 Amp. DP 30 mA, 10 KA ELCB - 01 no. & 40 Amp. DP MCB (C curve) - 01 no. & Hundred One only

O/G:- 6 Amp. SP MCB:- 4 Nos., 16 Amp. SP MCB:- 4 Nos., 25 Amp. SP MCB:- 4 Nos. Cat.-

III( MCBDB must be erected in line & level with spirit level and finish the external edge

with box cutting plaster ) (Same colour MCB(SP/DP) should be used as same as

MCBDB)(Incl.necessary numbering/marking on box done with red colour radium sticker

as per site requirement & instruction given by EIC on site.Font/number size given by EIC

on site as per requirement)

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted

fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986

without MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of

MCB to be used) (n) Three phase 6 way SS Double door for horizontal single phase RS: Two Thousand Eight

76 outgoing (If Required)( MCBDB must be erected in line & level with spirit level and 1.00 Each 2885.00 Hundred Eighty Five

finish the external edge with box cutting plaster ) (Same colour MCB(SP/DP) should only

be used as same as MCBDB)

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing and erecting Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on

phase and neutral 240 V having characteristic of quick action & tripping with all advance feature &

RS: Two Thousand Two

77 do not incorporate any electronic component (mounted in Box) for following Max. rating erected 3.00 Each 2213.00

Hundred Thirteen only

as directed with same company metal box with earthing terminal.Suitable for operation on Single

phase 240 Volt max. rating of (i) For 40 Amp. DP (In three phase DB)

Providing & erecting 240 V MCB Double pole switch for Motor and inductive load (C curve)

having 10 KA breaking capacity & confirms to IS:8828 in Existing M.S. box having following RS: Three Hundred

capacity. For 40 Amp DP. (In three phase DB ) Twenty Seven only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS :8828 with same company metal box with RS: One Thousand One

79 earthing terminal having following capacity with necessary Numbering with oil Paint by 2.00 Each 1172.00 Hundred Seventy Two

painter. [c] 63 Amp. (For GEB Cut out) only

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) having

10KA breaking capacity & confirms to IS :8828 in existing MS box having following RS: Seven Hundred

80 capacity with necessary Numbering with oil Paint by painter. [b] 63 Amp. (In three 1.00 Each 730.00

phase DB Main I/C)

Supplying & erecting 12 mm thick backelite sheet of approved make and grade

on25x25x3mm red oxide painted angle iron frame suitable for fixing ICDP SWITCH

and energy meter (contractor shall make approved drawing of Bakelite sheet To arrange RS: Two Thousand Two

81 required NO of Energy meter& ICDPswitch -busbar etc as per Actual space available in 2.00 Sq.Mtr. 2289.00 Hundred Eighty Nine

electrical room at site) only

Providing And Erecting Approved make Triple Pole Metal Clad Switch Fuse Unit 415/500 V.

RS: Five Thousand Seven

82 with HRC fuse of suitable load and neutral link confirming to IS.125 A (If required) 1.00 Nos. 5755.00

Hundred Fifty Five only

Providing and erecting busbar chamber confirming to IS-375 fabricated from 16 GMS sheet dust &

vermin proof having hinged door with rubber gasket and necessary busbar supports with copper

busbar having current density not more than 1.6 amp/sqmm (Rated current per Cross Section area)

RS: Five Thousand Six

duly wired with colour insulating tape for phase sequence, three phase & neutral Each equal & one

83 0.70 Rn. Mtr. 5675.00 Hundred Seventy Five

meter long suitable for following current capacity with necessary painting mounted on wall or

pedestal frame of required size with necessary incoming and outgoing connections with proper size

of copper strip/wire with lugs as directed. Suitable for 200 Amp.

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

Providing & laying HDPE Double walled corrugated pipes (DWC) of polyethylene (conforming to

IS: 14930 Part II) with minimum load required of 450N capacity with anti rodent and ultra violet

material properties with necessary connecting accessories of same material at required depth to be

laid 90 cms. under ground for laying of cable below ground / road surface for enclosing cable and RS: One Hundred

back filling the same to make ground as per original.For Outer dia. 50 mm and Inner dia. 38 Seventeen only

mm (Test Certificate to be Submitted)

Providing & Erecting 3 core 1.5 sq.mm. PVC insulated round copper wire ISI mark.

85 35.00 Mtr. 46.00 RS: Forty Six only

SITC of Outdoor aesthetically designed LED Street Light Luminaire with total consumption of

Max. 45 W with broad single piece die cast aluminium housing of broad size for better thermal

managment (Appr.by EIC) , LED's mounted on high quality metal core PCB with extremely

precison designed heat sink complete with IP66 protection Class with polycarbonate / Toughned

glass cover. the fixture should be suitable for pole/bracket mounting. The fixture to comply both

LM79 and LM 80 guidelines with high power LED module min. 130lumen/watt with toughen

RS: Three Thousand Five

86 Glass L70 at 50,000 hrs, provided with individual high quality polycarbonate lenses for better light 6.00 Each 3512.00

Hundred Twelve only

distribution. The watt capacity of each LED must be 4> watt in street light fitting The Fixture

Should be able to be Pole Mounted and also bracket mounted, provided with high quality driver for

protection against mis Wiring,over voltage high and low Voltage cut Off, opertional for high

amibient and high humid envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias Oprating range Voltage 160 to 270 V,

system efficiency > 110 lm/w,Operation current 700ma, and Lumen Output of mini. 4950 Lumes,

CCT > 5000K, CRI > 65, seperate high quality lense,beam angle 120 deg, surge immunity level at

least 10 KV non integral & 4 KV intrgral The Sperate Potted driver should have over current,

short circuit protection so that the fixture recovers once the fault is removed, over voltage

protection. In addition to the above product should be operational in the temperature range of 0 deg

to 50 deg and humidity range of 10% to 90% RH. [Note:-The manufacturer / authorised Channel

partner of the manufacturer has to submit 5 yrs free replcement Guarantee for complete Fixture]

Model approved by Engineer in Charge subject to above Specification.[Approval will be given

strictly subject to item specification]

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

For Street light Pole Bracket:Supplying and erecting street light pole bracket bracket consisting of

ISI mark "B" class G.I. Pipe 4.2 cm outside diameter complete with suitable B class G.I. Sleeve

tubing of 2 mm. thick and required size and approx. 45 Cms length suitable for 76.5 / 80 mm.

required size of pole top having nuts and bolts for fixing the brackets and having spread of Upto

0.70 mtr. length with 110 deg. with vertical plane and suitable welded stiffner reducer and nipple RS: Four Hundred

87 with check nut complete painted with one coat of red oxide and two coats of alluminium paint.(Zinc 6.00 Each 487.00

Eighty Seven only

Coating before alluminium Paint is mandatory) (a) For single arm bracket. (Jindal / Asian /

Tata / Surya Prakash make Only) (Fabricators:- Ambica / Fab / Bajaj / Impression

equipment Only) (Test certificate to be submitted)

Supplying and erecting Fabricating terminal box for street light pole made from 16 SWG M.S. sheet

having following size complete with fixing arrangement for terminal board, with necessary hole for

wire entry and exit from the box. The box shall be provided with cover and hinges on one side and

bolting at other end The box shall be fixed by clamps fabricated from 25mm x 6mm flat.The box

shall be painted with one coat of red oxide and two coats of paint having following box size 330 RS: Seven Hundred

mm x 260 mm x 140 mm (depth). And Providing and fixing Terminal board of size 5.0 x 127 x Two only

152.4 mm. bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit with suitable brass studs

with nuts, washers and clamps of size 25 mm x 3 mm suitable for pole painted with one coat of red

Providing & fixing double compressed heavy duty flange type brass cable gland with

rubber ring for P V C insulated armoured cable complete with outgoing tails, insulating RS: Forty Three

89A tape etc. For following size cables. For 2 to 4 core x 2.5/4.0/6.0 Sq. mm (Sigma, MCI, 12.00 Each 43.00

Comet Make Only)

For (D) 2 to 4 core 16 Sq. mm (Sigma, MCI, Comet Make Only) RS: Fifty Seven

For (C) 2 to 4 core 10 Sq. mm (Sigma, MCI, Comet Make Only) RS: Forty Eight

Providing And Erecting Solderless crimping type Copper lugs conforming to IS suitable for

cable of following size evenly crimped with high pressure tool & connected to switchgear

90 terminals with brass/cadmium plated nut bolts in an approved manner. For 1.5/2.5 to 6 20.00 Each 8.00 RS: Eight only

Solderiess crimping type Aluminium Lugs conforming to IS suitable for cable of following size

evenly crimping with high pressure tool & connected to switchgear terminals with brass/ cadmium

91A plate nut bolts in an approved manner.For 16/25 Sq.mm. Allumium Cable 16.00 Each 15.00 RS: Fifteen only

Item Description of Item Estimated Rate [Rs. Ps.] Amount

No. Quantity Unit Rs.

In Figure In Words

.For 10.00 Sq.mm. Allumium Cable

91B 40.00 Each 13.00 RS: Thirteen only

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium conductor

cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall with suitable G.I. RS: One Hundred Fifty

92A heavy guage cable clamp or in existing DWC pipe underground or road crossing or 40.00 Mtr. 152.00

floor.(a) For 4 core x 16 Sq. mm (For Stabi.)

(a) For 4 core x 10 Sq. mm (For Streetlight.) RS: One Hundred

Thirty Nine only

Providing & Erecting Univesal Astro interlligent Street light Control System insu with weather

RS: Twelve Thousand

proof box for indoor allplication 5KVA ( as Per atteched Specification)

93 1.00 Each 12895.00 Eight Hundred Ninty Five

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer,

RS: Seven Hundred

94 LT panel board, Motors etc. using copper clamp.With min 80 micron as per IS.Test Certificate must 10.00 Kg 787.00

Eighty Seven only

be submitted by agency.

Dismantling the existing light, fan, bell, independent plug point, wiring with mains of all types

95 40.00 point 1.00 RS: One only

along with accessories etc. complete and handed over to dept.

Dismantling the existing switchgears, DB and Busbar of any size complete with / without board or

96 13.00 Each 7.00 RS: Seven only

angle iron frame.

97 Dismantling the existing any type of indoor light fittings 20.00 Each 5.00 RS: Five only

Dismantling the existing ceiling fan / exhaust fan / cabin fan / bracket fan complete with

98 13.00 Each 9.00 RS: Nine only

accessories, G.I. down rod, frame etc. and making the site clear.

Total Electrical Amount (A)

Total Electrical Amount (A)

Total Schedule B Amount