Construction of PSI-1 & 2 Room at Virpur Police Station Dist Mahisagar (Including Electrification) [5th Attempt]

In Figure In Words

1 Demolition of Brick work and stone masonry including stacking of 11.40 Cum. 557.32 Rs. Five Hundred Fifty

serviceable materilas and disposal of unserviceable materials with all Seven & Paise Thirty Two

lead and lift.(ii) In Cement Mortar. Only

2 Demolition including stacking of serviceable materilas and disposal of 1.00 Cum. 1071.63 Rs. One Thousand

unserviceable materials with all lead and lift. (i) R.C.C. work Seventy One & Paise

Sixty Three Only

3 Dismentaling tiled of stone floors laid in mortar including stacking of 53.40 Smt. 48.63 Rs. Forty Eight & Paise

serviceable materilas and disposal of unserviceable materials with all Sixty Three Only

lead and lift.

4 Removing and scraping of old deteriorated plaster of any thickness 99.75 Smt. 19.69 Rs. Ninteen & Paise Sixty

fromm wall / R.C.C member including stacking of serviceable material Nine Only

and disposal of unserviceable from site of work with all lead and lift

5 Excavation for foundation upto 1.5 m depth including sorting out and 24.50 Cum. 121.72 Rs. One Hundred Twenty

stacking of useful materials and disposing off the excavated stuff upto One & Paise Seventy Two

any lead.(A) Loose or soft soil Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

6 Excavation for foundation upto 1.5 m depth including sorting out and 12.30 Cum. 155.60 Rs. One Hundred Fifty

stacking of useful materials and disposing off the excavated stuff upto Five & Paise Sixty Only

any lead.(B) Dense or Hard soil

7 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand 3.70 Cum 3762.67 Rs. Three Thousand

: 4- graded stone aggregates 20 mm nominal size) and curing complete Seven Hundred Sixty

excluding cost of formwork in (A) Foundation and Plinth Two & Paise Sixty Seven

8 BRICK WORK using common burnt clay building bricks having 22.00 Cum. 4172.60 Rs. Four Thousand One

crushing strength not less than 35 Kg./Sq. cm. In FOUNDATION Hundred Seventy Two &

AND PLINTH in cement mortar 1 : 6 ( 1 cement : 6 coarse sand ( Paise Sixty Only

Conventional Bricks )

9 Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand , 8 3.40 Cum 2739.28 Rs. Two Thousand Seven

graded machine broken stone aggregate 40mm nominal size ) and Hundred Thirty Nine &

curring complete excluding cost of form work in foundation and plinth. Paise Twenty Eight Only

10 Providing and laying controlled cement concrete M - 150 and finishing 4.50 Cum 4034.77 Rs. Four Thousand Thirty

smooth with curing etc. complete Including the cost of form work of Four & Paise Seventy

Plywood only with fair finish & Proping must be of steel only so as to Seven Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Foundation & Plinth. Rate are also inclusive of providing and

mixing Plasticizer of approved make in proportion as Per Mix Design .

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

11 Filling available excavated earth (excluding rock) in trenches, plinth 36.70 Cum. 135.56 Rs. One Hundred Thirty

sides of foundations etc. in layers not exceeding 20cm. In depth Five & Paise Fifty Six

consolidating each deposited layer by ramming and watering. Only

of 20cm. thickness including watering, ramming and consolidating etc. Two & Paise Twenty

complete. Three Only

13 Filling in plinth with sand under floors including watering ramming, 4.50 Cum. 475.05 Rs. Four Hundred

consolidating and dressing complete Seventy Five & Paise Five

14 Applying general insecticide pest control treatment to floors, 44.40 Smt. 45.36 Rs. Forty Five & Paise

cupboards etc including labour materials etc. complete. Using Thirty Six Only

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075% concentration by

mass) is recommended 10.5ml chemical diluted with 5 liters of water

application 0.5 litre chemical /Sqm of surface is recommended as per

15 Providing and laying controlled cement concrete M - 200 and finishing 1.10 Cum. 6118.45 Rs. Six Thousand One

smooth with curing etc. complete Including the cost of form work of Hundred Eighteen &

Plywood only with fair finish & Proping must be of steel only so as to Paise Forty Five Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in coping for any cross sectional area. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as

Per Mix Design .

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

16 Providing and laying controlled cement concrete M - 200 and finishing 2.00 Cum. 7291.44 Rs. Seven Thousand Two

smooth with curing etc. complete Including the cost of form work of Hundred Ninety One &

Plywood only with fair finish & Proping must be of steel only so as to Paise Forty Four Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in PLINTH BEAMS of any cross sectional area of beam. Rate are

also inclusive of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design .

17 Providing and laying controlled cement concrete M - 200 and finishing 2.00 Cum. 9098.23 Rs. Nine Thousand

smooth with curing etc. complete Including the cost of form work of Ninety Eight & Paise

Plywood only with fair finish & Proping must be of steel only so as to Twenty Three Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Beam for any cross sectional area at GROUND FLOOR . Rate

are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design .

18 Providing and laying controlled cement concrete M - 200 and finishing 0.75 Cum. 8807.42 Rs. Eight Thousand Eight

smooth with curing etc. complete Including the cost of form work of Hundred Seven & Paise

Plywood only with fair finish & Proping must be of steel only so as to Forty Two Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Lintel for any cross sectional area at GROUND FLOOR. Rate

are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design .

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

19 Providing and laying controlled cement concrete M - 200 and finishing 1.20 Cum. 6118.45 Rs. Six Thousand One

smooth with curing etc. complete Including the cost of form work of Hundred Eighteen &

Plywood only with fair finish & Proping must be of steel only so as to Paise Forty Five Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Lintel Band for any cross sectional area at GROUND FLOOR .

Rate are also inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

20 Providing and laying controlled cement concrete M - 200 and finishing 0.55 Cum. 9846.68 Rs. Nine Thousand Eight

smooth with curing etc. complete Including the cost of form work of Hundred Forty Six &

Plywood only with fair finish & Proping must be of steel only so as to Paise Sixty Eight Only

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in Chajjas having Any thickness up to floor two level including

finishing the exposed surface with cement mortar 1:3 ( 1 cement : 3 fine

sand) to give a smooth surface for All floor. Rate are also inclusive of

providing and mixing Plasticizer of approved make in proportion as

Per Mix Design .

21 Providing and laying controlled cement concrete M - 200 and finishing 4.10 Cum. 8054.30 Rs. Eight Thousand Fifty

smooth with curing etc. complete Including the cost of form work of Four & Paise Thirty Only

Plywood only with fair finish & Proping must be of steel only so as to

give a fair finish but excluding the cost of reinforcement for R.C.C.

work in SLAB having thickness of 10 cm and upto 13 cm thickness for

GROUND FLOOR. Rate are also inclusive of providing and mixing

Plasticizer of approved make in proportion as Per Mix Design .

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

22 BRICK WORK using common burnt clay building bricks having 18.10 Cum. 4451.53 Rs. Four Thousand Four

crushing strength not less than 35 Kg./Sq cm. In super structure above Hundred Fifty One &

plinth level upto floor two level. Conventional bricks in cement Paise Fifty Three Only

moratar 1 : 6 ( 1 cement : 6 coarse sand) for GROUND FLOOR.

23 HALF BRICK masonary in common brunt clay building bricks having 15.70 Smt. 677.49 Rs. Six Hundred Seventy

crusing strength not less than 35 kg./sq.cm.in cement mortar 1:4 (1 Seven & Paise Forty Nine

cement : 4 coarse sand ) conventional bricks for Ground Floor. Only

24 Providing 10 mm thick cement PLASTER in single coat on ceilings for 48.00 Smt. 221.63 Rs. Two Hundred Twenty

interior plastering and finished even & smooth in C.M. 1: 3 ( 1 cement : One & Paise Sixty Three

3 sand ) Including Finishing with a Floating Coat of Cement and Fine Only

Sand Mortar of Proportion 1:1 (1.5mm thick About) at GROUND

25 Provinding 15 mm thick cement PLASTER in single coat on brick or 177.80 Smt. 223.77 Rs. Two Hundred Twenty

concrete wall for interior plastering and finished even and smooth in Three & Paise Seventy

C.M. 1:4 ( 1 cement : 4 sand ) Including Finishing with a Floating Coat Seven Only

of Cement and Fine Sand Mortar of Proportion 1:1 (1.5mm thick About)

at GROUND FLOOR.

26 Provinding 20 mm thick SAND FACED cement PLASTER on walls 58.80 Smt. 342.33 Rs. Three Hundred Forty

above ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 Two & Paise Thirty Three

cement : 3 sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 cement : Only

1 sand ) etc. Complete for any height.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

27 Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush 6.00 Smt. 8399.74 Rs. Eight Thousand Three

Door Shutter with 1mm Thick Laminates on Both Side of Shutter. Hundred Ninety Nine &

Making / Construction of Flush Door is with Pine or southern Yellow Paise Seventy Four Only

Pine Filler and 2.5mm core veneer Both Side and 0.4mm Face Veneer

on Both Side with Lock rail on Center. Flush Door Provide with Teak

wood beading patti (32mm X 12mm) on Peripheries of Flush Door with

Door Frame of Non Teak Solid Wood of size 100mm x 60mm with

Chemically Treated and Seasoned Including Paint Matching with Laminates. Frame

& Flush door shutter having 5 year warranty against attack of biological agent like

termite, borers, decay, fungi and harmful insects also warranty against seasoning

related issues like crack, bending, twisting, warping. Laminates on shutter shall be

press by cold press method. Shutter shall be brought to site in packed PVC bags &

pvc coating shall be removed on completion of work in such a way that shutter &

Frame is free from nail mark & any damages etc. Rates are also Inclusive of all Labors

& Proviging 15cm. Long 8 No of Hold Fast (25mm X 5mm) & 4 No of 6 Inch S.S. but

Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame and Fixing

following S.S. Fixtures And Fastening.

(1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper 1 No, 100mm Long,

(3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X

10mm thick. Door are Fixing as per Details Drawing & Instruction of Engineer in

charge. All Materials Used Shall be as Per approved Material Make List of G.S.P.H.C.

The Required Frame is to be Obtained from Vanil Udhyog Maked Only.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

28 Providing and fixing Solid PVC Flush Door Shutters 24mm thick made 3.30 Smt. 4476.00 Rs. Four Thousand Four

fro Co- Extruded THREE LAYER RIGID PVC Foam Sheet (Single Hundred Seventy Six

extruded) with density not less than 600 Kg / cbm. Outer Layer (0.8- Only

1mm) thick should be of Rigid PVC with Density not less than

kg/cbm including Providing & Fixing WPC Door Frame Uperline Patti

of 24mm x 6mm Size. Door should be Water proof, Termite proof, Fire

Retardant & having good screw holding capacity. Providing & Fixing

100% Solid Wood Plastic Composit (WPC) Door Frame 90mm x 45mm

made from Wood Plastic Composite (Single extruded Process) material

with dencity 780kg / cbm All as per specifications & drawings etc.

complete as per direction of Engineer-in-charge.

29 Providing & Fixing Teak Wood Door Frame Patti 40mm x 10 mm 13.50 Rmt. 71.01 Rs. Seventy One & Paise

thick as per detail drawing and as directed by Engineer In charge.Rate One Only

are inclusive of all material , Labour, Taxes.

30 Providing & Fixing WPC Door Patti 26 mm x 6 mm thick as per detail 5.70 Rmt. 57.02 Rs. Fifty Seven & Paise

drawing and as directed by Engineer In charge. Rate are inclusive of all Two Only

material , Labour, Taxes.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

31 Providing and fixing window having extruded aluminum Colour 8.50 Smt. 1568.27 Rs. One Thousand Five

anodized section frame main outer size 95mm x 24mm x 1.17mm @ Hundred Sixty Eight &

wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x Paise Twenty Seven Only

31.75mm x 1.30mm,@ Wt.1.07 Kg/mt , vertical member of size 92mm x

31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt,

vertical member of size 40mm x 18mm x 1.29 mm @ wt.of 0.456Kg/mt/

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

32 Providing and fixing standared extruded of alluminium section of size 1.00 Smt. 1163.92 Rs. One Thousand One

63mm x 38.10mm x 1.2mm @ Wt. 0.643Kg/mt with colour anodized Hundred Sixty Three &

alluminium frame for ventilation with 5mm thick frosted glass as Paise Ninety Two Only

details etc complete for Ventilation

33 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm 48.00 Smt. 1649.60 Rs. One Thousand Six

thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 Hundred Forty Nine &

cement: 6 coarse sand) on new surface or fixing on existing flooring by Paise Sixty Only

adhesive including dismentaling of existing flooring and material

jointed with color cement slurry including finished with flush pointing

& cleaning the surface etc. complete. Size & Shade of tiles shall be as

per Approved Architecture drawing & as per direction of Engineer in

charge. For all Floor.material Shall be as per the Approved Make List of

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

34 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 mm 4.00 Smt. 1445.20 Rs. One Thousand Four

thick tile for skirting,risers of steps and dedo over10 mm (average) Hundred Forty Five &

base of cement mortar 1:3 ( 1 cement: 3 coarse sand) on new surface Paise Twenty Only

orfixing on existing flooring by adhesive including dismentaling of

existing flooring and material jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete. Size & Shade of tiles shall be as per Approved Architecture

drawing & as per direction of Engineer in charge. For all Floor.Shall be

as per the Approved Make List of GSPHCL.

35 Providing & Laying 24" x 24" Antiskid Vitrified 8 mm thick tile 4.00 Smt. 1453.19 Rs. One Thousand Four

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 Hundred Fifty Three &

coarse sand) on new surface or fixing on existing flooring by adhesive Paise Ninteen Only

including dismentaling of existing flooring and material jointed with

color cement slurry including finished with flush pointing & cleaning

the surface etc. complete. Size & Shade of tiles shall be as per Approved

Architecture drawing & as per direction of Engineer in charge. For all

36 Provinding & laying Printed / Coloured Glazed 8mm thick TILES in 65.60 Smt. 983.99 Rs. Nine Hundred Eighty

skirting, risers of steps and DADO on 10mm thick cement plaster 1: 3 ( Three & Paise Ninety

1 cement : 3 coarse sand ) & jointed with white cement slurry. ( Size of Nine Only

Tiles shall be 600 mm x 300mm ). Size & Shade of tiles shall be as per

Approved Architecture drawing & as per direction of Engineer in

charge. For all Floor.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

37 Providing and Fixing Granite Telephonic Black Colour 18 mm thick 10.50 Smt. 2428.00 Rs. Two Thousand Four

for jambs and sills of doors & windows using neat cement slurry laid Hundred Twenty Eight

over 20 mm average base of cement mortar 1:1(1 cement:1 Coarse Only

Sand) and jointed with grey cement slurry including racking(Tancha

Work) rubbing and polishing,scaffoldings,tools and tackles,scaffolding

etc. complete(with base of neat cement) as per direction of Engineer in

charge including full rounding the exposed edges as directed.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

38 Providing and laying integrated cement based proprietary water proofing 32.10 Smt. 595.97 Rs. Five Hundred Ninety

treatment of required thickness over the roof including providing and Five & Paise Ninety

applying two coat of Acrylic polymer of approved brand & manufactures Seven Only

and china mosaic fitting and finally finishing the surface with white cement

slurry and sloping out terrace slabs with following specification laid to

required slope not flotter than 1 : 80 (incl treating the vertical surface of the

perapet wall upto 20cms height above finished level of terracing including

finishing, curing, testing etc. comp. Rate is incl. Ten years performance of

guarantee bond to be given on stamp paper. (No extra shall be paid for

increase in thickness for proper slope). (a) Applying two coats of Acrylic

based polymer of approved brand & manufacture as per recomodation of

manufacturer over the R.C.C. Slab incl. clearing the surface before treatment.

(b) Finishing the surface with China Mosaic pieces laid on 10mm thick joint

less cement mortar of mix 1:3 (1 cement : 3 coarse sand) admixed with

proprietary water proofing compound conforming to IS :2645 and finally

finishing the surface with trowel with neat cement slurry.(c) The whole

terrace so finished shall be flooded with water for a minimum period of two

weeks for curing for final test.All above operations to be done in order and as

directed and specified by the engineer - in - charge.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

39 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on 47.70 Smt. 190.43 Rs. One Hundred Ninety

Ceilling/Slop Surface (two coats) to give an required shap even shade & Paise Forty Three Only

after throughly brushing the surface to remove all dirt and remains of

loose poweder material etc. complete. Rate are inclusive of applying

two coat of lapy (Putty) and one coat of primer on new Ceilling/Slop

Surface to give and even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter and sand

papered smooth. Fine Putty, primer, plastic Emulsion Paint Shall be

used as per approved material list by GSPHCL. (For All Floor)

40 Finishing Wall with Plastic Emulsion Paint on Wall Surface (two 156.30 Smt. 179.92 Rs. One Hundred Seventy

coats) to give an required shap even shade after throughly brushing Nine & Paise Ninety Two

the surface to remove all dirt and remains of loose poweder material Only

etc. complete. Rate are inclusive of applying two coat of lapy (Putty)

and one coat of primer on new wall surface to give and even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth. Fine Putty,

primer, plastic Emulsion Paint Shall be used as per approved material

list by GSPHCL. (For All Floor)

41 Finishing wall with weather proof exterior emulsion paint on wall 519.00 Smt. 153.35 Rs. One Hundred Fifty

surface (two coats) over and above applying One Coat Of Primer to Three & Paise Thirty Five

give an required shape even shade after thoroughly brushing the Only

surface to remove all dirt, and remains of loose powdered materials.etc

complete. primer,Exterior Emulsion Paint Shall be used as per

approved material list by GSPHCL. (For any Height)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

42 Providing & fixing Concealed Center Point to wall celing & floor 16.20 Rmt 206.73 Rs. Two Hundred Six &

CPVC (SDR-13.5) PIPE having National Sanitation Foundation (NSF) Paise Seventy Three Only

seal For Portable Water of 20 mm. dia. nominal bor tube fitting and

clamps including making good the wall, ceiling and floor etc.

Complete. The Material Shall be as per the Approved Make List of

43 Providing & fixing Concealed Center Point to wall celing & floor 13.90 Rmt 251.31 Rs. Two Hundred Fifty

CPVC (SDR-13.5) PIPE having National Sanitation Foundation (NSF) One & Paise Thirty One

seal For Portable Water of 25 mm. dia. nominal bor tube fitting and Only

clamps including making good the wall, ceiling and floor etc.

Complete. The Material Shall be as per the Approved Make List of

44 Providing & fixing Concealed Center Point to wall celing & floor 17.20 Rmt 443.29 Rs. Four Hundred Forty

CPVC (SDR-13.5) PIPE having National Sanitation Foundation (NSF) Three & Paise Twenty

seal For Portable Water of 40 mm. dia. nominal bor tube fitting and Nine Only

clamps including making good the wall, ceiling and floor etc.

Complete. The Material Shall be as per the Approved Make List of

45 Providing and fixing Gun metal check or non-return fullway wheel 1.00 Nos. 656.86 Rs. Six Hundred Fifty Six

valve.(E) 40mm dia. & Paise Eighty Six Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

46 Providing & Fixing 15mm Concealed Heavy Duty Stop Cock with 2.00 Nos. 942.54 Rs. Nine Hundred Forty

Exposed Part & Other Accessories (Sleeve, Lever, Wall Flange) . Rate Two & Paise Fifty Four

are inclusive of all matreials, Labour & Necessary Fittings etc. Only

Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model & Make of Concealed

Heavy Stop Cock Shall be as per the Approved Make List of GSPHCL.

47 Providing & fixing CONSEAL COCK 25 MM DIA Concealed Heavy 2.00 Nos. 1233.57 Rs. One Thousand Two

Duty Stop Cock with Exposed Part & Other Accessories (Sleeve, Lever, Hundred Thirty Three &

Wall Flange) . Rate are inclusive of all matreials, Labour & Necessary Paise Fifty Seven Only

Fittings etc. Complete as per Detailed Drawings, Specifications and as

per the Instruction of Engineer In charge. The Model & Make of

Concealed Heavy Stop Cock Shall be as per the Approved Make List of

48 Providing & Fixing to Wall Ceilling and Floor SWR Rain Water pipe as 8.60 Rmt. 302.54 Rs. Three Hundred Two

Per IS-13592 of 90mm Dia. Complete with Special Flings, Compressor & Paise Fifty Four Only

type Fittings like including All Labour Charges etc. complete including

making good the Ceilings, Floors and on terrace. Rain water pipe shall

be 90mm Dia. SWR horizontal pipe and vertical pipe and 90mm bend

at the end near by Ground level. Rate are Inclusive of all Necessary

Fittings required for ALL FLOORS. The Material Shall be as per the

Approved Make List of GSPHCL.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

49 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil 11.00 Rmt. 245.74 Rs. Two Hundred Forty

Waste Pipe with 'O' Ring 75 mm dia. of ISI 13592/92. Rate inclusive of Five & Paise Seventy Four

All fittings like single or double 'Y' with door, reducer, coupler single Only

'T' with door bend including All Labour Charges etc. complete and

making good the Wall, Ceiling and Floor. The Material Shall be as per

the Approved Make List of GSPHCL.

50 Providing and fixing to wall, ceiling and floor U.PVC SWR Soil 12.20 Rmt. 471.36 Rs. Four Hundred

Waste Pipe with 'O' Ring 110 mm dia. of ISI 13592/92. Rate inclusive Seventy One & Paise

of All fittings like single or double 'Y' with door, reducer, coupler Thirty Six Only

single 'T' with door bend including All Labour Charges etc. complete

and making good the Wall, Ceiling and Floor. The Material Shall be as

per the Approved Make List of GSPHCL.

51 Provinding and Fixing in position UPVC / SWR cowel vent to pipe 75 2.00 Nos. 16.47 Rs. Sixteen & Paise Forty

mm dia as directed. Seven Only

52 Provinding and Fixing in position UPVC / SWR cowel vent to pipe 110 2.00 Nos. 28.16 Rs. Twenty Eight & Paise

mm dia as directed. Sixteen Only

53 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 2.00 Nos. 580.47 Rs. Five Hundred Eighty

100mm diameter with jali of the following nominal diameter of self & Paise Forty Seven Only

cleansing design with C.I scread down or hinged grating including the

cost of cutting and making good the walls.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

54 Provinding and Fixing S.W Gully Trap without C.I. grating but brick 2.00 Nos. 1176.94 Rs. One Thousand One

masonary chamber and water tight Precast RCC cover with frame of Hundred Seventy Six &

300 x 300mm size inside with standard weight (i) Square mouth traps Paise Ninety Four Only

(B) 150 x 100mm size P or R Type.

55 Providing & Fixing Health Faucets (ABS Body).Providing & Fixing 2.00 Nos. 565.51 Rs. Five Hundred Sixty

Health Faucets (ABS Body). Rate are inclusive of all matreials, Labour Five & Paise Fifty One

& Necessary Fittings etc. Complete as per Detailed Drawings, Only

Specifications and as per the Instruction of Engineer In charge. The

Model & Make of Health Faucets Shall be as per the Approved Make

List of GSPHCL.

56 Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate 4.00 Nos. 990.61 Rs. Nine Hundred Ninety

are inclusive of all matreials, Labour & Necessary Fittings etc. & Paise Sixty One Only

Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer In charge. The Model & Make of Bib Tap Shall

be as per the Approved Make List of GSPHCL.

57 Providing & Fixing Two way Bib Tap with Wall Flange. Rate are 2.00 Nos. 1309.39 Rs. One Thousand Three

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as Hundred Nine & Paise

per Detailed Drawings, Specifications and as per the Instruction of Thirty Nine Only

Engineer In charge. The Model & Make of Two way Bib Tap Shall be as

per the Approved Make List of GSPHCL.

58 Providing & Fixing Angle tap 15mm with Wall Flange. Rate are 8.00 Nos. 665.51 Rs. Six Hundred Sixty

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as Five & Paise Fifty One

per Detailed Drawings, Specifications and as per the Instruction of Only

Engineer In charge. The Model & Make of Angle Tap Shall be as per

the Approved Make List of GSPHCL.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

59 Providing & Fixing Wall Hung with PVC Flush Tank,Soft Seat Cover & 2.00 Nos. 5470.90 Rs. Five Thousand Four

intergal "P" or "S" Trap Including Jointing the Trap with Pan and Soil Hundred Seventy & Paise

Pipe. Wall hung shall be fixed on S.S. heavy duty rack bolt having Ninety Only

16mm dia, 165mm length using Plastic Sleeve Make by Using Drill Bitt

Only.Rate are inclusive of all materials,Labour & Necessaary Fittings

etc. Complete as per Detailed Drawings, Specifications and as per the

Instruction of Engineer in charge. The Model & Make of Wall Hung &

Flush Tank Shall be as per the Approved Make list of GSPHCL.

60 Providing and fixing Single Hole Wash Basin with C.I. or M.S. brackete 2.00 Nos. 3935.33 Rs. Three Thousand Nine

& M.I. fisher union,P.V.C. water pipe with Connection from Stop Cock Hundred Thirty Five &

to Pillar Tap , PVC Bottle Trap with Connection 32mm dia. C.P. brass Paise Thirty Three Only

waste Coupling etc. Complete. Rate are inclusive of all

materials,Labour & Necessaary Fittings etc. Complete as per Detailed

Drawings, Specifications and as per the Instruction of Engineer in

charge. The Model & Make of Wash Basin Shall be as per the

Approved Make list of GSPHCL.

61 Providing & Fixing Towel Rod. Rate are inclusive of all matreials, 2.00 Nos. 1078.70 Rs. One Thousand

Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Seventy Eight & Paise

Specifications and as per the Instruction of Engineer In charge. The Seventy Only

Model & Make of Towel Rod Shall be as per the Approved Make List

of GSPHCL.

62 Providing & Fixing towel ring. Rate are inclusive of all materials, 2.00 Nos. 909.08 Rs. Nine Hundred Nine &

Labour & Necessaary Fittings etc. Complete as per Detailed Drawings, Paise Eight Only

Specifications and as per the Instruction of Engineer in charge. The

Model & Make of Towel ring Shall be as per the Approved Make list of

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

63 Provinding and fixing 600mm x 450mm bevelled edge MIRROR or 2.00 Nos. 850.90 Rs. Eight Hundred Fifty

superior glass mounted on 6mm thick A.C. sheet of plywood sheet & Paise Ninety Only

fixed to wooden plugs with C.P. brass screws & washers.

64 Providing & Fixing SHOWER WITH ARMS. make Rate are 2.00 Nos. 931.79 Rs. Nine Hundred Thirty

inclusive of all materials, Labour & Necessaary Fittings etc. Complete One & Paise Seventy Nine

as per Detailed Drawings, Specifications and as per the Instruction of Only

Engineer in charge. The Model & Make of SHOWER WITH ARMSShall

be as per the Approved Make list of GSPHCL.

65 Providing & fixing S.S. CLOTH HANGER ( 5 HOOK ) as per per 6.00 Nos. 249.85 Rs. Two Hundred Forty

Detail drawigs and as directed by Engineer in charge. Rate are Nine & Paise Eighty Five

inclusive of all material, labour, Taxes. Samrat brand as approved. Only

66 Providing a I.S.I. mark 7 levers three key brass pad lock of NAVATAL 3.00 Nos. 243.64 Rs. Two Hundred Forty

(Godrej) make 65mm dia on completion of project. Three & Paise Sixty Four

67 Providing Supplying and fixing S4 Channel System (S4Channel + 12.00 Each. 421.58 Rs. Four Hundred

Profile Bracket + U Bolt Rubber Mounted System) for Multiple Pipes Twenty One & Paise Fifty

for External Vertical Fixed line with Wall distance 3" including nuts, Eight Only

Bolts, Fastners etc. Complete as per detailed Specifications and as

directed by Engineer in Charge.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

68 Providing Supplying and fixing Single Pipe Bracket System with U 36.00 Each. 182.83 Rs. One Hundred Eighty

Bolt Rubber Mounted for Pipe Supporting Clamping System for Two & Paise Eighty Three

External Vertical Fixed line with Wall distance 3" including nuts, Bolts, Only

Fastners etc. Complete as per detailed Specifications and as directed by

Engineer in Charge.

69 Providing, Fabricating and fixing M.S. GRILL/GATE of approved 140.00 Kg. 75.06 Rs. Seventy Five & Paise

pattern fabricated from M.S. flat, square bars, round bars, c-channel, Six Only

Square/round box pipe as per detail Drawings. Rate is inclusive of

welding with grinding smooth wirh two coats of Oil paint and one coat

of yellow Zinc chromate primer coat of approved brand only. Oil paint

shall be used as per approved material list of GSPHCL. Steel must be of

ISI mark only.

70 Construction brick masonary chamber for underground C.I.inspection 2.00 Nos. 3793.18 Rs. Three Thousand

chamber and bends with brick having crushing strength not less than Seven Hundred Ninety

35 kg/cm2 in C:M 1:5 R.C.C. top slab with 1:2:4 mix (1 cement; 2 coarse Three & Paise Eighteen

sand; 4 graded stone aggregate 20mm nominal size ) with 8mm dia Only

steel at 15 cm.c/c and providing and fixing precast R.C.C. cover size

0.60 x 0.45 x 0.07 m with 40 x 40 x 5mm angle frame and foundation

concrete 1:5:10 inside plaster 15mm thick with cement with a floating

coat of neat cement walls and bed concrete etc. complete .Rates are also

inclusive of outside plaster 15mm thick in C:M 1:3 from top of chamber

and all side upto 45 cms. deep below ground level. (A) Inside

dimension 455mmx610mm and 450mm deep for Single or Multi

purpose pipe line.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

71 Construction brick masonary chamber for underground C.I.inspection 2.00 Nos. 5476.93 Rs. Five Thousand Four

chamber and bends with brick having crushing strength not less than Hundred Seventy Six &

35 kg/cm2 in C:M 1:5 R.C.C. top slab with 1:2:4 mix (1 cement; 2 coarse Paise Ninety Three Only

sand; 4 graded stone aggregate 20mm nominal size ) with 8mm dia

steel at 15 cm.c/c and providing and fixing precast R.C.C. cover size

0.60 x 0.45 x 0.07 m with 40 x 40 x 5mm angle frame and foundation

concrete 1:5:10 inside plaster 15mm thick with cement with a floating

coat of neat cement walls and bed concrete etc. complete .Rates are also

inclusive of outside plaster 15mm thick in C:M 1:3 from top of chamber

and all side upto 45 cms. deep below ground level. (A) Inside

dimension 600mmx850mm and 450mm deep for Single or Multi

purpose pipe line.

72 Extra over above item no 70 for additional depth 0.1 mt. or part thereof 2.00 Nos. 239.99 Rs. Two Hundred Thirty

beyond 450mm depth for brick masonary chamber for 455mm x Nine & Paise Ninety Nine

610mm size. Only

73 Extra over above item no 71 for additional depth 0.1 mt. or part thereof 2.00 Nos. 322.37 Rs. Three Hundred

beyond 450mm depth for brick masonary chamber for 600mm x Twenty Two & Paise

850mm size. Thirty Seven Only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

74 Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems 2.40 Rmt. 229.00 Rs. Two Hundred Twenty

(Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth Nine Only

External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-

pressure underground Sewerage & Drainage application as per EN:13476-3 including

all local and central taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores etc. complete. (100 mm ID

Dia) Including Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings

with the help of coupler ( on line / off line ) attached with one end of pipes, sliding

over the elastomeric sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the trench, laying on the lower

bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe

segments etc. complete as per drawing,specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per

direction of Engineer-in-charge.(Pipe shall be of Approved Make list of GSPHCL)

(100mm Dia.)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

75 Providing and supplying of Class SN8 Structured Wall polyethelene Piping systems 13.40 Rmt. 396.00 Rs. Three Hundred

(Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth Ninety Six Only

External Annular Corrugated and Smooth Internal Surfaces (Double Wall) for non-

pressure underground Sewerage & Drainage application as per EN:13476-3 including

all local and central taxes, transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores etc. complete. (150 mm ID

Dia) Including Lowering, laying and jointing of class SN 8 structured wall ( External

Annular Corrugated & Smooth Internal surface) Polyethylene Piping and fittings

with the help of coupler ( on line / off line ) attached with one end of pipes, sliding

over the elastomeric sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the trench, laying on the lower

bedding (constructed at bottom of trenches) at prescribed gradient,depth & alignment

,testing the water tightness of the joints, ensuring the continuity tests of specified pipe

segments etc. complete as per drawing,specifications & detailed engineering,

including carriage of pipes & fittings from site stacks to the place of laying etc. as per

direction of Engineer-in-charge.(Pipe shall be of Approved Make list of GSPHCL)

(150mm Dia.)

76 Providing & Fixing 3mm thick acrylic sheet with vinyl letter colour- 0.20 Smt. 7193.88 Rs. Seven Thousand One

2073-dark grey for back ground and colour -2190-white letter with Hundred Ninety Three &

required screws etc as per required sizes complete etc as per Paise Eighty Eight Only

specification & instruction of engineer in charge.

77 Providing T.M.T, FE - 500/500D Bar Reinforcement for R.C.C.work 1718.20 Kg. 76.52 Rs. Seventy Six & Paise

including cutting, bending, binding and placing in position Fifty Two Only

etc.complete for All Floor. (Brand as approved by GSPHC)

Total Sch B-1 Civil cost Rs.

Electrical Item Discription

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

78A Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 20.00 Point 461.00 RS: Four Hundred

1.5 sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) Sixty One only

copper PVC insulated FRLS wire for earth continuity in FIA approved

ISI mark medium class white colour 20/25 mm dia. embossed rigid

PVC pipe with PVC fitting fixed with adhesive solution erected on/in

Brick Wall / slab along with continuous G.I. fish wire to draw wires

and laid in approved manner zari for PVC pipe and boxes shall be

filled with cement mortar and finishing the surface to match the wall /

ceiling complete with approved make 5/6 Amp. ISI make modular

type switch and accessories mounted in 20 G. G.I. company fabricated

metallic box covered with appropriate front plate modules erected

flushed with wall / ceiling with necessary modular lamp holder /

modular ceiling rose / HD Connector 75 mm deep GI box if require (

make & model approved by EIC and matching colour with switches

accessories) as directed for concealed wiring. Light point. Cat.-II.

Necessary sheet must be erected on all box to prevent mortar going

into the box.& for ceiling light Point & Junction box use deep Junction

box of same PVC Pipe make . Length of point wiring must not increase

than 10 mtr. For that necessary switch boards and their locations must

be finalised before execution by agency otherwise payment will not be

done for extra long point. (For future extention, if required, agency has

to erect one higher size metal box and modular plate as per instruction

of EIC. Cost of blank plate shall be paid as per tender item) [Wire must

be having box packing][This item include cleaning(inside/outside) of

all GI switch boards,electric point box,fan box,MCBDB & box cutting

plaster finishing for modular plate without any gap]

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

78B For Bell Point, Cat.-II 2.00 Point 461.00 RS: Four Hundred

Sixty One only

78C For Fan Point (with 6 A. Modular type switch and two module hum 4.00 Point 648.00 RS: Six Hundred

free EME Five or more steps type electronic fan regulator both having Forty Eight only

ISI mark) Cat.-II

78D For separate Point (with 6 Amp. Switch & 3/5 pin socket both having 3.00 Point 489.00 RS: Four Hundred

ISI mark) Cat.-II Eighty Nine only

78E For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket 10.00 Point 234.00 RS: Two Hundred

both having ISI mark ) Cat.-II Thirty Four only

79 Providing and erecting Medium Class FIA approved and ISI mark 100.00 Mtr. 24.00 RS: Twenty Four

white colour (embossed) RIGID PVC PIPES of following size complete only

erected with necessary PVC fittings & Junction boxes fixed with

adhesive solution & clamps on / in wall / ceiling along with

continuous fish wire to draw mains with necessary fittings and junction

boxes for following dia.. (a) 20 mm. dia.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

80A Providing & Erecting Mains with FRLS PVC Insulated wire ISI marked 50.00 Mtr. 62.00 RS: Sixty Two

1.1 KV grade in Existing FIA approved ISI mark medium class only

20/25/32 mm dia. embossed rigid PVC pipe with PVC fitting fixed

with adhesive solution to be erected on/in brick wall / slab along with

continuous G. I. fish wire to draw mains laid in approved manner with

plastering by cement mortar & finishing the surface to match the wall /

ceiling complete with FRLS PVC insulated wire for earth continuity.

(Approved ISI make only) (Conductor resistance should be as per

IS:8130/1984 ) [a] 2 x 1.5 sq.mm. FRLS copper multi stranded

conductor mains with 1.5 sq.mm. FRLS copper multi stranded

conductor for earthing as per standard colour code. (with 20 mm dia.

PVC pipe) [Wire must be having box packing]

80B 2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 30.00 Mtr. 82.00 RS: Eighty Two

sq.mm. FRLS copper multi stranded conductor for earthing as per only

standard colour code. (with 20/25 mm dia. PVC pipe) [Wire must be

having box packing]

80C 2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 50.00 Mtr. 111.00 RS: One Hundred

sq.mm. FRLS copper multi stranded conductor for earthing as per Eleven only

standard colour code. (with 20/25 mm dia. PVC pipe) [Wire must be

having box packing]

80D 2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 40.00 Mtr. 146.00 RS: One Hundred

sq.mm. FRLS copper multi stranded conductor for earthing as per Forty Six only

standard colour code. (with 25 mm dia. PVC pipe) [Wire must be

having box packing]

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

81 Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible 20.00 Mtr. 37.00 RS: Thirty Seven

pipe with necessary socket, PVC bushes saddle, Check-nuts etc. only

complete of following sizes.

82 Providing & Erecting Plug Point wiring with 1.1 KV grade ISI marked 2.00 Point 712.00 RS: Seven Hundred

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with Twelve only

1.5 sq.mm (green) copper PVC insulated FRLS wire for earth continuity

in FIA approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution

erected in brick wall/slab along with continuous G. I. fish wire to draw

wires and laid in approved manner zari for PVC pipe & boxes shall be

filled with cement mortar & finishing the surface to match the wall /

ceiling complete with 16 Amp Modular type Swich and accessories

mounted in 20 G. GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall. (a) 16 Amp

Indicator switch & 1 No. 6/16 A universal socket white colour

suitable for 3 pin top duly both having ISI mark. (Necessary Sheet

Must Be Erected On All Box To Prevent Mortor Going In To The Box)

83A Providing following type of Modular Type Accessories mounted with 2.00 Each 139.00 RS: One Hundred

20 G company fabricated metalic box, single mounting base frame Thirty Nine only

covered with textured / metallic front plate, modules erected with

necessary connection. As desired by Engineer in charge. a) TV Co-axial

Socket outlet. Cat.-II

83B Two pin / RJ-11Telephone Socket (For One Gang) Cat II 3.00 Each 130.00 RS: One Hundred

Thirty only

83C Blank Plate Single. Cat.-II 20.00 Each 16.00 RS: Sixteen only

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

83D Modem Jack for Computer Open RJ-45 Cat II 3.00 Each 139.00 RS: One Hundred

Thirty Nine only

83E 16Amp. Universal socket. Cat.-II (For AC Points) 3.00 Each 139.00 RS: One Hundred

Thirty Nine only

83F 16Amp. Switch socket. Cat.-II (For AC Points) 3.00 Each 130.00 RS: One Hundred

Thirty only

84 Providing & erecting Switch board for Computer or electric apparatus 3.00 Each 1023.00 RS: One Thousand

consisting of following items in single board erected on 20 G. G.I. Ten Hundred Twenty

company fabricated metallic box erected with appropriate front plate Three only

modules erected flushed with wall as directed. 1 no. 6/16 Amp.

universal Socket, 1 no. 13 Amp. international socket, 2 nos. 16 Amp.

indicator switch, 2 nos. 6 Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For

Computer power Supply board. Cat.-II

85 SITC of specified make Cat - 6 voice /data cable to be done in prelaid 140.00 Mtr. 47.00 RS: Forty Seven

PVC pipe / raceway , but without the cost of raceway or pipe ( the wire only

is to be drawn from MFD/ JB to outlet point) (a) CAT - 6-Y Colour (

For Voice Cabling ) & X -Colour(For Computer Data Cable ) .

( Molex/Avaya/Systimax/Legrand make)

86 Providing & erecting Modular type accessories mounted on 20 G. G.I. 2.00 Each 502.00 RS: Five Hundred

company Fabricated Galvanised Metal box covered with appropriate Two only

front plate modules erected flushed with wall / ceiling with 1 nos of

Amp. SP switch & 3 nos. of 6 Amp. 3/5 - pin plug: Cat-II(For TV

Switch Board)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

87 Providing and Erecting following size of TV Co-axial flexible cable 80.00 Mtr. 39.00 RS: Thirty Nine

comprising inner conductor of solid bare copper insulated with Foam only

PE & Secondary conductor made of poly – Aluminium film bonded Al.

Braids @ coverage of 65% overall sheated with black PVC insulation

(FINOLEX/RRCABLE/POLYCAB/ HAVELLS)a. RG-6

88 Providing & Erecting 1.0 mtr long Earthing system by making 1.00 Each 5785.00

minimum bore of 150 mm dia in soft soil. Suitable for doing pipe-in-

pipe technology earthing.Earthing electric rod must be made from

Corrosion free Hot dip galvanizing pipes having following

specification. Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency has to

bring the earth resistance to at least 02 ohms & voltage between neutral

& Earthing upto 02 volt. Agency has to maintain earthing & its value

during defect liability. If required.

(A) Earthing Electrode Outer Pipe:- 88mm O.D, Outer Pipe wall

thickness :- 2.6mm minimum, Inner pipe:- 42mm O.D, Pipe thickness:-

2.5mm, Terminal Size:- 70 mmX100mm length, Zinc coating(Hot dip

galvanising):- 75-100 micron, Nut bolt:- 2 no. with washer suitable for

14mm dia, total minimum Weight (approx) of earth electrode with

inside conductive material 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%

(C) Back fill Compound :-Earthing compound should be capable to

retain moisture for min.1year weight(appro.) of earth electrode with

inside conductive material is 15 Kg.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

(D) Chamber and cover :-Earthing chamber should be size of

400mmX400mmX400mm depth and Cover should be heavy duty cast

iron with required size of 300mmX300mmX4mm thick.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail

& sample for approved before supplying

Water must be poured in bore before starting earthing. Earthing value

must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral &Earthingupto

02 volt. Agency has to maintain earthing& its value for one year. If

required. Earthing must be done in the presence of A.E (GSPHCL)

89 For above earthing additional charges for boring in hard rock soil (by 1.00 Each 276.00 RS: Two Hundred

breaker) & filling soft soil in earth pit (certificate for soil have to given Seventy Six only

by DEE / AE along with photographs)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

90 Supplying and erecting 8W led lamps with following wattage capacity 2.00 Each 111.00 RS: One Hundred

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in built- Eleven only

surge protection,Polycarbonate diffuser, mounting suitable for E14 /

E27 / B22 lamp holders, pf >= 0.5 LED Lamps integral type, with PC

diffuser suitable LAMP holder

91 Supplying and Erecting LED indoor fitting of approximately 4feet long 5.00 Each 370.00 RS: Three Hundred

with LED of wattage 0.2W to 0.5W assemble on single MCPCB with Seventy only

housing use as a heat sink shall be made from Aluminum extrusion

having enough strength (sample must be approved by EIC) with

polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.(B) Rated input voltage and

frequency: 220V to 240 VAC ; 50Hz.(C) Rated input wattage: max.

24w(D) Rated input current : 0.2 Amp(E) Power Factor : Min. 0.90(F)

ATHD : Max. 15%(G) Rated Luminous flux: Min. 2420 lm(H) CCT:

6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life

span: Min. 50000 Hrs @ L70(L) Over Voltage protection: Withstand up

to 440V/AC for 4 Hrs.(M) Surge protection : Min. 2KV(N) IP rating: IP

20(O) IK rating : IK 02(P) Short circuit , Open circuit & Reverse Polarity

Protection must be provided(Q) Fixing clamp design & strength should

be sufficient to hold the fitting erected on wall or ceiling.(R) 3 core

copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

specification]

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

92 SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W 10.00 Each 751.00 RS: Seven Hundred

Cool/Warm white Color LED Down lighter office Lighting Luminaire Fifty One only

with separate potted driver with single piece pressure die cast

aluminium alloy housing with corrosion resistant powder coated finish

with PMMA/PS/Injection moulded Polycarbonate diffuser with high

brightness LED complete (only from Philips Lumileds, CREE, Nichia,

Bridgelux, Seoul & Osram) CRI > 80, CCT 5600K (5400 to 5800K bin).

The LED's should be mounted on back lit metal core PCB for better

heat conduction and long life of LED. The Fixture should comply all

International Standarad third party (LM 79 for complete fixture, LM80

for individual LED). The Fixture have protection like miswiring, over

voltage, over load, wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥

90 lm/w & driver efficiency > 85%.

For 24 W fixture wide voltage range from 160 V to 270 V, 50/60 HZ @

240V application, 4 KV surge protection.The fixure must have min.

2160 lumen light output. The fixture should be provided with external

separate Potted driver, latest Valid BIS approved Luminaire and driver.

The Fixture efficiency ≥ 90 lumens/watt only for safety and

performance. (L70 @ 30,000 Hrs.) The fixture should be able to easily

mount on POP / Grid false ceiling. The Luminiare should be tested as

per IP 20 and following test reports should be submitted at the time of

approval: heat resistant test, thermal test, Ingress protection test, drop

test, Photobiological report with 3 core X 1.0 Sq.mm. flexible wire as

per site requirement [Note:-The manufacturer / authorized Channel

partner of the manufacturer has to submit 5 yrs. free replacement

Guarantee for complete Fixture

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

93 Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 4.00 Each 1929.00 RS: One Thousand

AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as Nine Hundred Twenty

per below. (1) Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Nine only

Power Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM:

minimum 330, (6) Service value:min 4.3 m3/min. (7) Class of

insulation: 'B', (8) No. of heavy duty premium quality Ball bearing:

Two, (9) Total Body: Top & Bottom should be alluminium, (10) Blade:

Aluminium approx 1.1 mm thick, (11) Colour: White high grade

powder coating, (12) Canopy: Two Nos. Heavy duty, (13) Condenser:

Min. 1.5 MFD (15% Tolerence) as per IS:1709-1984, (14) Down road: up

to 1.0 mtr as per site requirment, (15) Required fixing accessories, (16)

3 core 0.50 sq.mm ISI wire as per site requirment, (17) No vibration and

noise due to mechanical parts. (18) Safety wire provided by

manufacturer with ceiling fan. (Agency has to erect safey wire with

ceiling fan and checked with EIC) (OEM has to approved model as per

tender specification and tested at ERDA)

94 Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to 4.00 Each 125.00 RS: One Hundred

the RCC bars up to 50 mm Length each side & piereced through 16 Twenty Five only

Gauge G.I Box having 125 mm dia & depth of 75 mm complete erected

concealed in ceiling with necessary modular type Round plate

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

95 Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe 5.00 Rn. Mtr. 107.00 RS: One Hundred

/M.S. Pipe down rod erected duly painted for fan complete with Seven only

necessary 24/0.2 flat 3 core flexible cable with earthing.The Down rod

thickness,hole,locking arrangement,construction,power coating,colour

shed should be same as original down rod brought with ceiling fan.For

that agency has to give original down road sample to fabricator and

one sample down rod should be approved with EIC .After approval

given by EIC agency can use the down rod as per approved sample.If

without approval down rod will be erect on site,agency has to replace

them with own cost

96 Supplying & erecting approved make low noise Decorative exhaust 2.00 Each 1687.00 RS: One Thousand Six

fan having size 200 mm with 1350 RPM with round / square frame Hundred Eighty Seven

ABS/metalic body with Grill and inbuilt lowers. only

97 Decorative Dig Dong bell Stereo type 250 Volt complete erected on 3.00 Each 170.00 RS: One Hundred

existing polished wooden block or in M.S. box with 3mm thick white Seventy only

ISI mark laminated sheet. (Anchor, Vision, Rider make)(If Required)

98 Supplying and erecting M.S./G.I. metal box having 16 Gauge painted 100.00 Sq. Inch 5.81 RS: Five and Paise

with red oxide be concealed in wall with necessary plastering & Eighty One only

finishing with 3 mm thick laminated sheet with grooving as directed of

following depth 3" depth.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

99 Providing & erecting 240 V MCB Double pole switch for Motor and 1.00 Each 599.00 RS: Five Hundred

inductive load (C curve) having 10 KA breaking capacity & confirms to Ninty Nine only

IS:8828 with same company metal box with earthing terminal having

following capacity with necessary Numbering with oil Paint by painter.

For 40 Amp.Cat.III.

100 Providing ad erecting approved make single phase Double Door 1.00 Each 4125.00 RS: Four Thousand

metal clad D.B. as per relevant indian standards ammended upto date. One Hundred Twenty

Supplying and fixing following way single phase MCB distrubution Five only

board of company fabricated with sheet box with powder coated

inside and outside after apply seven tank chemical process of MCBDB

Door, back Side & Body must be made of 1.2 mm thick CRCA sheet

cover complete with suitable integral single piece construction tinned

copper busbar and link with all necessary interconnection and with

necessary size MS frame for mounting MCBDB. Manufacturer must be

provided (1) IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D

type PU gasket. (2) Seven tank Powder coating Certificate (3) Tinned

Copper/Brass make neutral & Earthing link with isolation &

Protecting Cover for 240 Volts on surface / recess complete with loose

wire box, terminal connectors for all incoming and outgoing circuits,

with suitable size FRLS PVC insulated copper conductor up to terminal

blocks and internal connection, tinned coppper bus bar, 1 no. tinned

copper neutral link, tinned copper earth bar, din bar, detachable gland

plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

For 8 Way MCBDB: Including 40 Amp. 30 mA double pole ELCB

(ELCB confirming to IS:12640/1988 having sensitivity of 30 mA and

breaking capacity of 10 KA), MCB 40 Amp. double pole switch (C

curve confirms to IS:8828 having breaking capacity of 10 KA) and S.P.

MCB of rating 6 to 32 Amp. with NL suitable to operate on 240 Volt

A.C. power. (6 Amp to 32Amp SP MCB:-4 Nos as per site requirement

& Instruction of EIC)

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP)

should be used as same as MCBDB) [Including Necessary numbering /

marking on box done with red colour radium sticker as per site

requirement and instructions given by EIC on site. Font / number size

given by EIC on site as per requirement

101 Supplying & erecting 12 mm thick backelite sheet of approved make 0.50 Sq. Mtr. 2289.00 RS: Two Thousand

and grade on 25 x 25 x 3 mm red oxide painted angle iron frame Two Hundred Eighty

suitable for fixing ICDP SWITCH and energy meter (contractor shall Nine only

make approved drawing of Bakelite sheet To arrange required No. of

Energy meter & ICDP switch -busbar etc. as per Actual space available

in electrical room at site)(If required)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

102 Supplying and erecting Fabricating terminal box for street light pole 6.00 Each 702.00 RS: Seven Hundred

made from 16 SWG M.S. sheet having following size complete with Two only

fixing arrangement for terminal board, with necessary hole for wire

entry and exit from the box. The box shall be provided with cover and

hinges on one side and bolting at other end The box shall be fixed by

clamps fabricated from 25mm x 6mm flat.The box shall be painted with

one coat of red oxide and two coats of paint having following box size

330 mm x 260 mm x 140 mm (depth). And Providing and fixing

Terminal board of size 5.0 x 127 x 152.4 mm. bakelite sheet with

Amp. kitkat pattern porcelain fuse unit with suitable brass studs with

nuts, washers and clamps of size 25 mm x 3 mm suitable for pole

painted with one coat of red lead paint.

103 Providing and Fixing of wall and terrace bracket consisting of ISI 6.00 Each 487.00 RS: Four Hundred

mark "B" class G.I. Pipe 4.2 cm outside diameter and length suitable for Eighty Seven only

building face for fixing the brackets and having spread of Upto

mtr. length with suitable degree angle as per site situation suggested by

EIC. vertical plane and suitable welded stiffner reducer and nipple

with check nut complete painted with one coat of red oxide and two

coats of alluminium paint with . complete with 150*150*2mm thick G.I

plate with 4no heavy duty galvanized jasti khila of required size or

Single arm bracket (pipe in pipe type) suitable for terrace as per design

given by EIC Considering parfait, height ,width and total height of

building and type of led fitting (a) For single arm bracket

(Jindal//Asian/Tata/Surya Prakash make Only) Fabricators:- Ambica /

Fab / Bajaj / Impression equipment Only) (Test certificate to be

submitted)

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

104 SITC of Outdoor aesthetically designed LED Street Light Luminaire 6.00 Each 3512.00 RS: Three Thousand

with total consumption of Max. 45 W with single piece die cast Five Hundred Twelve

aluminium housing, high power LED shall be mounted on high quality only

metal core PCB with extremely precison designed heat sink complete

with IP66 protection Class with polycarbonate / thoughened glass

cover the fixture should be suitable for pole/bracket mounting. The

fixture to comply both LM79 and LM 80 guidelines with LED module

min. 130 lumen/watt with toughen Glass L70 at 50,000 hrs, provided

with high quality polycarbonate lenses for better light distribution.

The Watt capacity of Each LED Must be > 4 Watt in Street Light

Fitting.The Fixture Should be able to be Pole Mounted and also bracket

mounted, provided with high quality driver for protection against high

and low Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias Oprating

range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total

lumens not less then 4950, CCT > 5000K, CRI > 65, beam angle 120 deg,

4kV integral & non integral surge immunity level at least 10 KV.

The Separate Potted driver should have over current, over voltage

protection, short circuit protection so that the fixture recovers once the

fault is removed. In addition to the above product should be

operational in the temperature range of 0 deg to 50 deg and humidity

range of 10% to 90% RH.(Note:- The manufacturer/authorized Channel

partner of the manufacturer has to submit 4 yrs free replcement

Guarantee for complete Fixture.

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

105 Providing & fixing double compressed heavy duty flange type brass 15.00 Each 43.00 RS: Forty Three

cable gland with rubber ring for P V C insulated armoured cable only

complete with outgoing tails, insulating tape etc. For following size

cables. For 2 to 4 core x 2.5/4.0/6.0 Sq. mm (Sigma, MCI, Comet Make

106 Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured 80.00 Mtr. 359.00 RS: Three Hundred

multistrand Copper conductor cable for 1100 volt to be laid 90 cms. Fifty Nine only

Under ground or to be laid on wall with suitable G.I.1.0 mm thick

heavy guage cable clamp every 300mm or in existing DWC pipe/

Hume pipe/ trench underground or road crossing or floors (a) For

4 core x 4 sq.mm.

107A Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte 30.00 Mtr. 87.00 RS: Eighty Seven

multi stranded, annealed copper conductor with heat resistant PVC only

insulated conforms to IS:694, IEC - 227 erected in existing pipe of

following size (Specifically for control panel, relays, power

switchgears, motor starters & control wiring) with required size of

copper lugs, nuts and bolts if required. [f] One wire 10.00 sq. mm

107B For 16.00 Sq.mm 30.00 Mtr. 134.00 RS: One Hundred

Thirty Four only

108 Solderless crimping type Copper lugs conforming to IS suitable for 50.00 Each 8.00 RS: Eight only

cable of following size evenly crimped with high pressure tool &

connected to switchgear terminals with brass/cadmium plated nut

bolts in an approved manner. [a] 1.5/2.5 to 6 Sq.mm

Item Estimated Rate [Rs. Ps.]

Description of Item Quantity Unit Rs.

In Figure In Words

109 Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 30.00 Mtr. 44.00 RS: Forty Four

kv grade ISI marked copper wires of following size to be erected as only

directed. 3 core 1.5 sq.mm. PVC insulated round copper wire ISI mark.

110 Providing & laying HDPE Double walled corrugated pipes (DWC) 10.00 Mtr. 117.00 RS: One Hundred

(conforming to IS: 16205 (part 24) 2018)) with minimum load required Seventeen only

of 450N capacity with anti rodent and ultra violet material properties

with necessary connecting accessories of same material at required

depth to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the same to

make ground as per original. (A)For Outer dia.50mm and Inner dia.

38mm (Test Certificate to be Submitted)

Total of Sch. B2 (Ele) : Rupees.

Total Tender Amount(Civil + Elect.work ) i.e. B1 + B2 Rupees.

Signature of contractor

Executive Engineer

G.S.Police Housing Corp.Ltd.