Deposit work of TVM CorporationLaying new pipe line at Panchami line, Pappadu and Manjanpara area in Vazhottukonam ward under Thirumala section-Pipeline Work

Amount

Pipe laying

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

15.2.2:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:4:8 leaner mix ( including equivalent design mix)

100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil.

100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals.

100.9.9:Laying uPVC pipes of class 2 to class 6 and specials, lowering to the trenches already made, placing in position aligning the pipeline to the lines and levels and jointing the pipes and specials with solvent cement and testing the pipeline with water to the required test pressure (excluding cost of pipes and specials): 110 mm nominal outside diameter pipes.

OD105837/2022-2023:Supplying 20mm ASTM Pipe(excluding GST)

OD105838/2022-2023:110 mm End cap

OD105839/2022-2023:Supplying and fixing 100 mm CID Joint

OD105840/2022-2023:110 mm PVC Bend

OD105841/2022-2023:Supply of CIR JOINTS-110mm

OD105842/2022-2023:Supply of 110mm PVC TEE 10Kg/cm2

OD105843/2022-2023:Supplying and fixing PVC Reducer 110x90 / 110x75/110x63 mm as per site condition

OD105845/2022-2023:Conveying CI MH cover with frame from the deptl store to site and placing in position etc. complete

OD105846/2022-2023:Taking connection from the existing main(single boring) including earthwork excavation,supplying and fitting 25mm saddle piece,boring the main,supplying and fitting 25mm brass ferrule 1no,25mm GM full way wheel valve 1no,bend1no,union 1no,etc and connecting the newly laid main,testing the joints etc complete.

OD105847/2022-2023:Taking connection from the the existing main (double boring ) including earth work excavation ,boring the main Supplying and fitting saddle piece 2 Nos ,25 mm brass ferrule 2 Nos , 25 mm GM Full way wheel valve 2 nos ,bend 02 Nos ,union 2 Nos.32 mm PVC adopler 2 Nos ,110 X 32 mm PVC Reducer 2 Nos and connecting the newly laid main testing the joint etc.complete.rate as per item No 100.1.1 of SH KWA approved data

100.98.505:Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

100.98.506:Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 100mm.

100.98.510:Supply of CI Plain End Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 250mm.

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

100.31.1.2:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 100mm diameter, Class I.

100.31.1.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class I.

4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

OD105850/2022-2023:Providing Alteration of house connection from the existing main including earth work excavation, supplying and fitting suitable saddle piece, supplying and fitting 20 mm brass ferrule 1 no, 20 mm GM full way wheel valve 1no, bend 1no,union 1no etc. and connecting the newly laid main, testing the joints etc.complete but excluding cost of pipe.

CONSTRUCTION OF VALVE CHAMBER

15.43.2:Dismantling manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in-Charge:Bituminous road

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.2.2:Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.22.4:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelHot rolled deformed bars

OD105851/2022-2023:Conveying and Fixing CI MH cover with frame from the deptl store to site and placing in position etc. complete

Supply of material

100.98.237:Supply of PVC Pipe, 10kg/cm2, 110mm Dia.

SUDHARMAN V

K AJITH KUMAR

CHANDRAN K

Bidder Name

SUDHARMAN V

K AJITH KUMAR

SASIDHARAN NAIR V

CHANDRAN K