Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.6 LAccepted-AOC | ₹1.6 L Quoted ₹2.6 L | L1 | Accepted-AOC Award |
| 2 | L2₹2.9 L+₹29,508 (11.4%)Rejected-Finance R O VILLAGE AND PO DIYAR TEHSIL BHUNTAR DISTT KULLU H P | ₹2.9 L+₹29,508 (11.4%) | L2 | Rejected-Finance In Eligible |
| 3 | L3₹3.0 L+₹36,260 (14.0%)Rejected-Finance | ₹3.0 L+₹36,260 (14.0%) | L3 | Rejected-Finance In Eligible |
| Sl No | Description | Qty | Unit | Nikhil Sharma L2 | Shivashish L3 | Shyam Lal Sharma L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost as per direction of Engineer-in-charge with in all leads and lifts. | 25.2 | Cum | 590 ₹14,868 | 600 ₹15,120 | 550 ₹13,860 Lowest |
| 2.00Laying, jointing (by way of circumferntial butt welding joints by electric arc welding ) and testing of Galvanised mild steel tubes ( GI pipe) of following diameter confirming to IS:1239-1990( latest with up to date ammendments) having minimum wall thickness as per IS code with bevelled/ plain ends in a random lengtth of 4 to 7 meters , including manufacturing reducers/ tapers, all short pices bends etc and class of pipes specified below, provided and jointe as per site requirement made from parent tubes. including lowering and laying in excavated trenches to ensure required level including flushing , cleaning and hydraulic testing complete in all respect to the satisfaction of engineer in charge . the fabricated bends shall have three or four cuts having its radius not less then five times the dia of pipe . the damaged portion of the pipes and specials made from the parant tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bitumenous paint over a primming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts. | ||||||
| 2.01 | 100mm dia | 400 | Rmt | 340 ₹1,36,000 | 350 ₹1,40,000 | 300 ₹1,20,000 Lowest |
| 3.00Providing spot welding of joint ( by way of circumfrential butt welded joints by electrical arc welding) to (GI pipes) of following dia meters confirming to BIS 1239-2001 (latest with upto date amendments) having wall thickness as per code with bevelled/plain ends in a random length of 4 to 7 meters, including manufacturing reducers/tapers, all short pieces, bends etc. as per site requirement made from parent tubes. The welding electrodes shall be as per IS 814 of Advani Oerlikon/L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be meashured and paid for separately) | ||||||
| 3.01 | 100mm dia | 50 | Joints | 2,750 ₹1,37,500 | 2,800 ₹1,40,000 | 2,500 ₹1,25,000 Lowest |
Tender Value
₹2.0 L
EMD Value
₹4,000
Closing Date
15 May 2025, 5:00 pmClosed
Executive Engineer
Jal shakti Division Kullu
SH Laying Jointing welding and testing of GI pipe 100 mm dia at various RDs
2025_HPIPH_104971_1
1141-90 WSS Kasol
Open Tender
Civil Works
Item Rate
60 days
WSS Kasol
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹4,000
22 Jul 2026
8 May 2025
16 May 2025
8 May 2025
15 May 2025
8 May 2025
Amount
Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost as per direction of Engineer-in-charge with in all leads and lifts.
Laying, jointing (by way of circumferntial butt welding joints by electric arc welding ) and testing of Galvanised mild steel tubes ( GI pipe) of following diameter confirming to IS:1239-1990( latest with up to date ammendments) having minimum wall thickness as per IS code with bevelled/ plain ends in a random lengtth of 4 to 7 meters , including manufacturing reducers/ tapers, all short pices bends etc and class of pipes specified below, provided and jointe as per site requirement made from parent tubes. including lowering and laying in excavated trenches to ensure required level including flushing , cleaning and hydraulic testing complete in all respect to the satisfaction of engineer in charge . the fabricated bends shall have three or four cuts having its radius not less then five times the dia of pipe . the damaged portion of the pipes and specials made from the parant tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bitumenous paint over a primming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts.
100mm dia
Providing spot welding of joint ( by way of circumfrential butt welded joints by electrical arc welding) to (GI pipes) of following dia meters confirming to BIS 1239-2001 (latest with upto date amendments) having wall thickness as per code with bevelled/plain ends in a random length of 4 to 7 meters, including manufacturing reducers/tapers, all short pieces, bends etc. as per site requirement made from parent tubes. The welding electrodes shall be as per IS 814 of Advani Oerlikon/L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & direction of Engineer in charge with in all leads and lifts. (Earth work in trenches will be meashured and paid for separately)
100mm dia
Nikhil Sharma (BID ID -516533)
Shivashish (BID ID -516525)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .