Renovation and Maintenance of Existing Control Room Building, Compound Wall, Chain-Link Fencing repair, Construction of Cable Trench and misc. civil works at various 66KV and 132KV SS under Khambhalia AM Division under Jamnagar Circle.

Name of Work :- "Renovation and Maintenance of Existing Control Room Building, Compound Wall, Chain-Link

Fencing repair, Construction of Cable Trench and misc. civil works at various 66KV & 132KV SS under Khambhalia

AM Division under Jamnagar Circle."

SR. DESCRIPTION APROX.

RATE UNIT AMOUNT

[A] DEMOLITION & DISMANTLING

1 Demolition of brick/Bella work and stone masonry

including stacking of serviceable materials and disposal

of unserviceable materials with all lead lift. (ii) In 124.00 557.00 CMT

2 Demolition including stacking serviceable material and

disposal of unserviceable materials with all lead and lift

(i) RCC/CC Work.

3 Cutting out cracks of roof terrace/wall to V section,

cleaning out, wetting, grouting with cement and sand

slurry 1:3 (1 cement, 3 sand).

4 Removing dry or oil bound Distemper/Scraping Acid

Alkali Paint by a washing and scraping and sand

papering the wall surface smooth including necessary 4483.00 13.00 SMT

repairs to scratches complete.

5 Scraping oil Paint from steel and other metal surface

and making the surface even(with Hand Scraping).

6 Removing & Scraping of old deteriorated plaster of any

thickness from wall / R.C.C. member including stacking

of serviceable material and disposal of unserviceable

from site of work with all lead and lift.

7 Dismantling tiles or stone floors laid in mortar including

stacking of serviceable materials and disposal of under 117.00 49.00 SMT

serviceable materials with all lead and lift.

8 Dismantling sanitary fittings like wash basin . WC pan

Indian and European type, flushing tank etc. including 22.00 410.00 NO

stacking the materials with all lead and lift.

9 Dismantling CI pipes GSW pipes and AC rain water

pipes with fittings and clamps including stacking the 16.00 76.00 RMT

materials with all lead and lift ( for any dia, of pipe)

10 Repairing aluminium/FRP Door by removing of old

floor spring & Providing new, removing of old rubber

lining, cleaning the edge of glass with cleaning material

properly, with out damage the glass and providing &

fixing new neoprence black rubber gasket lining to all

edges of glass for entire building doors at Control room. 103.00 1009.00 SMT

This item including all labours, materials, scaffolding

etc. Rate is inclusive of filling of gaps with approved

make & quality of silicon sealant around window frame

surface i. e. gap between frame & wall, giving water

tight test with sprinkling of water etc., complete.

11 Repairing aluminium window/Ventilator by removing

of old rubber lining, cleaning the edge of glass with

cleaning material properly, with out damage the glass

and providing & fixing new neoprence black rubber

gasket lining to all edges of glass for entire building

windows at Control room. This item including all 154.00 513.00 SMT

labours, materials, scaffolding etc. Rate is inclusive of

filling of gaps with approved make & quality of silicon

sealant around window frame surface i. e. gap between

frame & wall, giving water tight test with sprinkling of

water etc., complete.

12 Dismantling Chain-Link Fencing/ Rolling Shutter etc.

(Wood or steel shutters including chowkhars,

Architraves, Holdfasts and other attachment etc. 1.00 255.00 NO

complete and stacking them within all lead and lift.

Exceeding 3 Sq. Mt in area.

13 Removing, repairing and refixing of old gate by

Providing & fixing sliding gate of 40mm. Dia Mild Steel

Pipe `B' class all round and 20mm. dia. Mild Steel

Pipe at 200mm. C/C and 12mm. Mild Steel Square bars

at 200mm.C/C alternatively (i.e. ONE BETWEEN TWO

PIPES)vertically welded to 40mm. dia. pipe frame as

per drawing and design with necessary brackets,

hold fasts, locking arrangement on top & aldrop on

both the sides including base rail for sliding the gate 121.00 580.00 SMT

having ball bearing rollers & guide track of 50X6mm.

M.S. Flat with hold fast, fabrication of side supports

including fixing `G.E.T.C.O.‘letters on front side etc.,

complete with three coats of approved oil painting &

one coat of red oxide primer as directed by E.I.C. (THE

COST DOES NOT INCLUDE THE COST OF

REINFORCEMENT, COLUMN SUPPORT, JOISTS,

CONCRETE, MASONRY WORK.)

14 Removing, repairing by supplying necessary inside

panel jali, angle, cleats, flats,nuts and bolts etc

supplied by contractor and welding works completed &

refixing fabricated chain link fencing panel to vertical

angle posts by means of nuts & bolts as per drawing

drawing and design including 1 coat of red lead paint

primer & 2 coats of aluminium or any shade of synthetic

enamel paint/oil paint to the entire panel, brushing to

give an even shade including cleaning the surface of all

dirt, dust and other foreign matter etc., complete as

directed by E.I.C. [All required panel jali, angle, cleats,

flats, nuts and bolts etc supplied by contractor and

welding work completed by the contractor at his own

cost)- Chain-link Fencing Panel.

15 Providing and applying of anticorrosive treatment to

exposed thoroughly cleaned structural reinforcement

and steel section by applying GEOLITE or equivalent

chemical powder from 2mm to 40mm thickness by

hand using trowel or a mortar spray machine. Removal

of loose concrete, races of shoots, grease oil etc. from

beams column, chajjas, projection, lintel etc using

impact high frequency hammer/chisels, using

compressed air without damaging the existing concrete.

The application shall be done by wire brush or spray /

sand blasting after cleaning existing reinforcement with

wire/rotary to make the surface free from loose

materials, dirt etc. Providing and applying of

anticorrosive treatment to exposed thoroughly cleaned

structural reinforcement and steel section by two coat

of alkaline rust converting primer FEOVERT or

equivalent confirming to ASTM - 117 at an interval of

hours between two coats. Apply bipolar migratory

corrosion inhibitor EPCO-KP 100 or equivalent @

M/Ltr over entire surface to be repaired to prevent

corrosion in embedded concrete. Apply two coats of

interpenetrating polymer network system IPNET RB or

equivalent over reinforcement to protect and make up

the lost steel sections manufacturer under CBRI

technology. Patching of damaged concrete surface

including building up of surface profile structural

elements by using polymer concrete/mortar/epoxy-

latex modified air cured concrete/mortar system

confirming to ASTM-C1059-86 type II 91 cement; 3 well

graded clean pre-packed river sand with 10%epoxy

latex by weight of cement & water cement ratio (w/c)

as per 0.3) or recommended by manufacturer of

average of 25mm thickness in damaged areas including

applying structural grade epoxy/latex bond coat

confirming to ASTM-C882 91 prior to application of

polymer modified mortar/spray to ensure bond

between old concrete & new system by brush

application, levelling, profiling etc inclusive of all labour

material, equipment complete as per instruction of EIC.

16 Removing & Re- fixing existing pre-cast coloured

Rubber Dye inter locking Paver block filling in plinth

with available earth in layers not exceeding 200 mm,

thick layers including watering, ramming, consolidating 30.00 148.00 SMT

etc. including adding 75 mm sand layer for levelling

and filling the joint with sand in proper line and level

etc complete as directed by EIC.

17 Cleaning of under ground sump, Over Head R.C.C. Tank

( independent staging) including disposal of slit and

rubbish, all as per direction of Engineer-in-Charge. The

cleaning shall consist following operations:-(i)Tank shall

be emptied of water by pumping & bottom shall be

cleaned of silt and other deposits.(ii) Entire surface area

of the sump shall then scrubbed thoroughly with wire

brush etc. and pressure washed with water.(iii)

Chlorination of RCC internal surface by liquid 190.00 72.00 Smt

chlorine.(iv) The treated surface shall be dried using air

jetting and all loose particles shall be removal from the

surface.(v) Finally the surface shall be treated with

ultraviolet radiation etc. as per direction of Engineer-in-

Charge.Note: during cleaning any GI fittings or ball

cock is damaged that is to be repaired by contractor at

his own cost and nothing extra will be paid on this

18 Cleaning the manhole inspection chambers of any size

and or depth up to 20’ including removing and re fixing

the cover in good condition collecting and taking out

the sludge, debris, water etc. by means of labours or

sludge pump as per the inst. of Engineer in charge with 19.00 92.00 NO

throwing the sludge and debris up to lead of 2 KM away

as directed on quarterly base. (Note:- All required

materials will have be brought by Contractor at his own

[B] EXCAVATION, FILLING AND EARTH WORK

19 Excavation for foundation up to 1.5m depth including

refilling the trenches, sorting out and stacking of useful

materials and disposing of the excavated stuff up to any

lead, dressing, rolling watering & lift. No extra payment

shall be made for disposing of extra excavated earth

from s/s premises or switch yard etc as per directive of 352.00 525.00 CMT

EIC - including De-watering if required - For Any type of

soil/ Murrum/Soft rock / Hard rock. - Executed with

manual labour.Backfilling Consolidation shall be done

by spring vibratory earth compaction machine of 5 ton

20 Excavation for foundation above 1.5m depth including

refilling the trenches, sorting out and stacking of useful

materials and disposing of the excavated stuff up to any

lead, dressing, rolling watering & lift. No extra payment

shall be made for disposing of extra excavated earth

from s/s premises or switch yard etc as per directive of 48.00 743.00 CMT

EIC - including De-watering if required - For Any type of

soil/ Murrum/Soft rock / Hard rock. - Executed with

Backfilling Consolidation shall be done by spring

vibratory earth compaction machine of 5 ton capacity.

[C] CONSTRUCTION

(1)MASONRY WORK

21 Providing & laying White stone Bela masonry

(including quoin blocks, jamb blocks closer etc.) of

approved size in Cement Mortar (1:6) (1-Cement : 6-

Fine Sand) including racking out joints up to 12mm

depth, scaffolding, curing, filling up the gaps between

the joints complete as directed by E.I.C. - in foundation

and plinth.Note:1. Testing certificate requires to be

submitted. (Stones must be hard, tough, and free from

cracks or soft patches)2. Wetting of White stone Bela

requires for 03 to 24 hours before laying.3. Curing shall

commenced from 12 hours of laying and shall be done

22 Providing & laying White stone Bela masonry

(including quoin blocks, jamb blocks closer etc.) of

approved size in Cement Mortar (1:6) (1-Cement : 6-

Fine Sand) including racking out joints up to 12mm

depth, scaffolding, curing, filling up the gaps between

the joints complete as directed by E.I.C. - in Super

Structure G.F+F.F+Stair Cabin.

1. Testing certificate requires to be submitted. (Stones

must be hard, tough, and free from cracks or soft

2. Wetting of White stone Bela requires for 03 to

hours before laying.

3. Curing shall commenced from 12 hours of laying and

shall be done till 7 days.

(2) CONCRETE WORK

23 Providing and laying cement concrete 1:4:8 (1 Cement :

4 Coarse sand : 8 black crushed stone aggregate 40mm

Nominal size) and curing complete- excluding cost of

formwork Foundation and plinth.

24 Providing form work of ply wood shuttering so as to

give a smooth exposed finish including centering

(adjustable tubular steel supports). Shuttering strutting

and propping etc. for any height of propping and

centering below supporting floor to ceiling , and

removal of the same for reinforced concrete and plain

concrete. for Footings , foundations and pedestal.Note:

1. The plywood is so fixed on to the timber or steel

framework that it gives a flush surface on the inside.

Ensure all joints are sealed tight with tap or PU foam.

25 Providing & laying control cement concrete M-20 as

per mix design exposed work with curing etc. complete

excluding the cost of ply wood form work & adjustable

tubular steel supports / Props. and the cost of

reinforcement. For Footing base of col., foundation &

mass concrete. 78.00 4049.00 CMT

1. Date of casting shall be mentioned and curing with

Jute bag shall be done for 10 days.

2. Ensure concrete or PVC cover blocks are placed on

all sides and bottom.

26 Providing & laying control cement concrete M-20 as

per mix design exposed work with curing etc. complete

Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of

reinforcement G.F+ FF & Staircase - For Column etc.

1. Date of casting shall be mentioned and curing with

Jute bag shall be done for 10 days.

2. Ensure concrete or PVC cover blocks are placed on

27 Providing & laying control cement concrete M-20 as

per mix design exposed work with curing etc. complete

Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of

reinforcement. G.F+ FF & Staircase. - For Beam.Note:

Date of casting shall be mentioned and curing with

Jute bag shall be done for 10 days for slab beam curing

shall be done with water spray 3-4 times a day till

days.2. Ensure concrete or PVC cover blocks are placed

on all sides and bottom.

28 Providing & laying control cement concrete M-20 as per

mix design exposed work with curing etc. complete

Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of

reinforcement G.F+ FF & Staircase - For sill, Lintel,

Chajja, Slab, Coping, staircase other cantilever portion

1. Date of casting shall be mentioned and curing with

Jute bag shall be done for 10 days. For slab, pond

curing shall be done for 10 days.

2. Ensure concrete or PVC cover blocks are placed on

all sides and bottom.

29 Providing & laying control cement concrete M-25 as

per mix design exposed work with curing etc. complete

excluding the cost of ply wood form work & adjustable

tubular steel supports / Props. and the cost of

reinforcement. For Footing base of col., foundation &

mass concrete. 2.00 4330.00 CMT

1. Date of casting shall be mentioned and curing with

Jute bag shall be done for 10 days.

2. Ensure concrete or PVC cover blocks are placed on

all sides and bottom.

30 Providing & laying control cement concrete M-25 as

per mix design exposed work with curing etc. complete

Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of

reinforcement G.F+ FF & Staircase - For Column 2.00 10164.00 CMT

etc.Note: 1. Date of casting shall be mentioned and

curing with Jute bag shall be done for 10 days.2.

Ensure concrete or PVC cover blocks are placed on all

31 Providing & laying control cement concrete M-25 as

per mix design exposed work with curing etc. complete

Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of

reinforcement. G.F+ FF & Staircase. - For Beam.

1. Date of casting shall be mentioned and curing with

Jute bag shall be done for 10 days for slab beam curing

shall be done with water spray 3-4 times a day till

2. Ensure concrete or PVC cover blocks are placed on

all sides and bottom.

32 Providing & laying control cement concrete M-25 as per

mix design exposed work with curing etc. complete

Including the cost of ply wood form work & adjustable

tubular steel supports / Props. but excluding the cost of

reinforcement G.F+ FF & Staircase - For sill, Lintel,

Chajja, Slab, Coping, staircase other cantilever portion

1. Date of casting shall be mentioned and curing with

Jute bag shall be done for 10 days. For slab, pond

curing shall be done for 10 days.

2. Ensure concrete or PVC cover blocks are placed on

all sides and bottom.

33 Providing & Fixing in position as per approved drawing

TMT steel FE 500/500D/550/550D reinforcement bars

confirming to IS 1786 in RCC work including Cutting,

bending, binding with 16 gauge annealed wire, of bars 7002.00 76.52 KG

as per IS requirement If necessary and placing in

position etc. completed for RCC work. etc. completed as

directed by EIC. for G.F+ F.F + Stair Cabin.

(3) PLASTER WORK

34 Providing 15mm thick cement plaster single coat on

masonry/Bela/concrete wall/ceiling for plastering up to

any floor level finished even and smooth in cement

mortar 1:3 (1 Cement: 3 sand) for G.F+ F.F + Stair

1. Curing for minimum 7days shall be carried out with

minimum 3 times a day.

35 Providing 20mm thick sand face cement plaster on wall

up to height 10 meters above ground level consisting of

12mm thick backing coat of C.M. 1:3 (1 cement : 3 sand)

and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. complete.

1. Curing for minimum 7days shall be carried out with

minimum 3 times a day.

36 Providing 20mm thick cement plaster in single coat up

to floor two level and finished even and smooth in C.M.

1:3 (1 cement : 3 sand) and including scaffolding curing

etc. complete. 656.00 232.00 SMT

1. Curing for minimum 7days shall be carried out with

minimum 3 times a day.

37 Providing & fixing 18 gauge wire mesh jali having width

200 to 300 mm with nails before finishing the surface

with plaster. The item includes providing necessary

scaffolding also).

38 Supplying & Fixing 600 mm dia hot dip galvanising

cross spiral type razor edge concertina coil on wall up

to 3.0 m height with providing and fixing G.I. angle

50x50x6 mm PLUS '+' shaped as per drawing placed at

approx. 3.00 m apart having 80 circles, 200 clips with

optimum openable stretch of 6 m length using a central

core wire high carbon spring steel (High tensile wire)

made up of 2.6mm dia as per IS:4454, Part-1, grade-1-II

having minimum galvanising of 230-250 gsm per mm2

around which a edge of razor sharp barbs strip of 5mm

thick & 19mm width confirming to IS:513DD quality

having minimum galvanizing coating of 12 microns with

series of barbs punched along the length at regular

interval support / tied with two rows of barbered

runner wires to newly proposed MS / GI angle brackets

at top and one runner wire at the bottom with U nails &

clips etc complete as per manufacturers specification

and directed by EIC. (The item rate include the rate of

GI angles.)Note:1. Testing certificate of galvanized

coating shall be submitted to EIC.

39 Providing & applying Two coats of Acrylic Wall Putty of

Asian Paint 1354, Birla or its Equivalent and two Coats

of primer of approved brand and manufacture on new

wall/ceiling surface to give an even shade including 194.00 40.00 SMT

thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

40 Providing and applying (two coats) with plastic

emulsion paint of approved brand and manufacture like

Asian paints Apocolite premium emulsion, Dulex velvet

touch on undecorated wall surface to give an even

shade including thoroughly brushing the surface free

from mortar droppings and other foreign matter and 4193.00 84.00 SMT

sand papered smooth. Minimum 05 year warranty

certificate to be taken from paint brand. (Note: Before

making final payment to agency warranty certificate

from the original manufacture for specific project on

the name of agency must be collected.).

41 Providing and applying priming coat of approved brand

and manufacture and GETCO Approved Shade on wall

surface to give an even shade. The work included

thoroughly brushing/cleaning the surface free from 606.00 23.00 SMT

mortar droppings and other foreign matter and also

including preparing the surface even and smooth by sand

paper or any other approved method.

42 Providing and Applying 2(two) coats of APOCOLITE

APEX weather proof exterior emulsion paint of

approved brand and manufacture like Asian paints

Apocolite premium emulsion, Dulex velvet touch and

GETCO Approved Shade on undercoated wall surface to

give an even shade. The work included thoroughly

brushing/cleaning the surface free from mortar

droppings and other foreign matter and also including

preparing the surface even and smooth by sand paper or

any other approved method. Minimum 05 year

warranty certificate to be taken from paint brand.

(Note: Before making final payment to agency warranty

certificate from the original manufacture for specific

project on the name of agency must be collected.).

43 Providing & applying 3 coats of ACID / ALKALI resisting

paint of approved shade & make to wall, ceiling including

filling putty smoothing the surfaces scaffolding etc.,

complete as directed by E.I.C.Minimum 05 year

warranty certificate to be taken from paint brand. 321.00 74.00 SMT

(Note: Before making final payment to agency warranty

certificate from the original manufacture for specific

project on the name of agency must be collected.).

44 Providing and applying priming coat & Painting two

coats on previously painted steel and other metal

surface with enamel paint, brushing to give an even 991.00 127.00 SMT

shade including cleaning the surface of all dirt, dust and

other foreign matter.

45 Providing and laying polished Kota stone slab 25 mm th.

in risers of steps, Dedo and sills laid on 10 mm thick CM

1:3 & jointed with grey cement slurry including rubbing

and polishing etc. complete.

46 Providing and laying colour glazed tiles- JOHNSON /

KAJARIA / NITTCO / Somany / Simpolo / AGL / Varmora

Granito / Cera Sanitaryware make 8mm thick in flooring

& Dedo laid on bed of 12mm thick cement mortar 1:3 (1

cement : 3 course sand) & fixing the same in cement with

providing 12mm thick back coating of cement plaster in

CM 1:3 for base, filling the joints with white/colour

cement neatly finishing the joints curing etc. complete.

47 Providing and laying Vitrified tiles - JOHNSON / KAJARIA

/ NITTCO / Somany / Simpolo / AGL / Varmora Granito

/ Cera Sanitaryware make 8 to 10 mm thick tiles

(600mm x 600mm) or (300mm x 300mm) flooring over

20mm (Average) base of Cement Mortar 1:6 (1-Cement :

6 Coarse Sand) on new surface or fixing on existing 64.00 1109.00 SMT

flooring by adhesive materials and also for skirting and

dedo on 10mm thick cement plaster in 1:3 including

dismantling of existing flooring and jointed with colour

cement slurry including finished with flush pointing &

cleaning the surface etc complete for light shade.

48 Providing & laying 50mm th. IPS flooring in CC 1:2:4

including finishing the floor with smooth cement slurry 180.00 336.00 SMT

marking diagonal lines etc. complete.

(6) DOORS AND WINDOWS

Providing and fixing window having extruded 20 micron

thick colour anodized frame main outer size

63.50x38.10x19.5mm (of Jindal Section no:4605, @ wt

1.094Kg/Rmt), horizontal two track member size

61.85mm x 31.75mm x 1.20mm(of Jindal Section mo:

8687 @ wt of 0.695 Kg/mt), vertical member of size

61.85mm x 31.75mm x1.30mm(of Jindal section no:

8758 @ wt of 0.659 Kg /mt) with Sliding Shutters of

horizontal member Size 40mm x 18mm x 1.29mm(of

Jindal section no: 8949 @ wt of 0.456Kf/mt), vertical

member of size 40mm x 18mm x 1.29mm (of Jindal

Section: 8947 @ wt 0.457 Kg/mt, section 8948 @

0.457kG/mt) with 5 mm thick transparent bronze

colour/white tinted float glass with aluminium fittings

and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for Window.

Providing & fixing approved quality FRP door having

FRP frame of size 100x50mm & 28mm thick FRP shutter

50 with Depressed Panel shutter having extra 2.00 2354.00 SMT

reinforcement on side and edges and in Gel coat finish.

The core of the shutter is to be filled up with injected

fibre extinguishing grade polyurethane foam done in situ

along with embedded wooden pieces for stiffening and

also for fixing hinges and fixtures. The whole FRP frame

and shutter is to be water proof, weather proof, termite

proof and resistance to mild acid/Alkali resistance

including SS hinges with necessary s.s screws and

aluminium fixture and fastenings etc complete as

directed by EIC. 28mm th. shutter & 100x50mm frame.

(7) FABRICATION ITEMS

Providing and fixing approved quality rolling shutters of

approved make and made with gear operated type with

crane handle as per IS 6248-1979 having 18 gauge sheet

thickness and 80mm wide M.S. Laths interlocked

together at the ends by end locks mounted on specially

designed pipe shaft with bracket plates guide channels

51 and arrangements for inside locking with push pull 4.00 5324.00 SMT

operation complete including the cost of hood cover &

spring with one coat of red oxide primer followed by

coats of oil painting of approved shade & tint etc

complete as directed by E.I.C( The measurement shall be

paid for wall opening plus drum only) (A) Shutter having

width below 3.5 meter.

Providing and fabricating and erecting GI work Welded

angle posts, racks & trays for cable trench using

structural steel angels and flats, sheets etc. of approved

steel manufacturer as per drawing & design including

cutting, welding & fixing hold fast in wall with C.C. & with

hot deep galvanized as per IS-2633/72 and 209 of

or latest amendment etc& make etc. completed as

directed by EIC.(All materials required for the work to be

brought by the contractor).

1. Testing certificate of galvanized coating shall be

submitted to EIC.

Providing & applying water proofing treatment by on

terrace area of building Smart Care damp proof ultra of

Asian paints or equivalent by (1) cleaning the terrace,

parapet wall etc. complete by means brush, water etc. &

make it complete dust free (2) Applying crack seal on

cracks of terrace roof, parapet etc (3) providing first coat

of self priming smart care damp proof ultra of asian

paints or equivalent using brush & by adding 33% thinner

(water) & kept surface free for 4-6 hours for making dry

(4) applying first coat of water proofing smart care damp

proof ultra of asian paints or equivalent using roller

without adding any thinner & kept surface free for 4-6

hours for making it dry (5) joints of parapet & slab

packing work by smart care joint tap of asian paints or

equivalent (6) applying second coat of water proofing

smart care damp proof ultra of asian paints or equivalent

utilizing roller without adding any thinner & kept surface

free for 4-6 hours for making it dry. The contractor shall

submit performance guarantee in the form of BG / DD

for the waterproofing item at the rate of 20% of cost of

executed quantity of item of work order for a period of

5 years from actual date of completion of work on

stamp paper of appropriate value in approved format

of GETCO. . (Note: Before making final payment to

agency warranty certificate from the original

manufacture for specific project on the name of agency

must be collected.)

Providing & applying water proofing treatment on wall

area of building by Smart Care damp proof ultra of Asian

paints or equivalent by (1) cleaning the terrace, parapet

wall etc. complete by means brush, water etc. & make it

complete dust free (2) Applying crack seal on cracks of

terrace roof, parapet etc (3) providing first coat of self

priming smart care damp proof ultra of asian paints or

equivalent using brush & by adding 33% thinner (water)

& kept surface free for 4-6 hours for making dry (4)

applying first coat of water proofing smart care damp

proof ultra of asian paints or equivalent using roller

without adding any thinner & kept surface free for 4-6

hours for making it dry (5) joints of parapet & slab

54 packing work by smart care joint tap of asian paints or 2782.00 252.00 SMT

equivalent (6) applying second coat of water proofing

smart care damp proof ultra of asian paints or equivalent

utilizing roller without adding any thinner & kept surface

free for 4-6 hours for making it dry. The contractor shall

submit performance guarantee in the form of BG / DD

for the waterproofing item at the rate of 20% of cost of

executed quantity of item of work order for a period of

5 years from actual date of completion of work on

stamp paper of appropriate value in approved format

of GETCO. (Note: Before making final payment to

agency warranty certificate from the original

manufacture for specific project on the name of agency

must be collected.)

Providing & placing 50mm thick & 300mm wide

Prestressed Concrete Cover (for clear span of up to

meter in proportion (1:1:5:3) or M-20 necessary

reinforcement or 4mm dia HT steel wire-4 Nos. bars and

4mm dia. distribution bars at 150 mm C/C as per drawing

& design including vibrating with vibrators. Finishing all

the surfaces, curing by placing in water pond for ten days

etc. complete as directed by E.I.C. ( The rate includes

cost of all material required, labour charges,

transportation, loading, unloading etc.

Providing and fixing Sign Board made out of 2 mm

Aluminium/ ACP sheet of size 200 x 120 cms as per

design given by EIC, pre treated with phospheting

process and acid etching, coated with one coat of epoxy

primer and two coats of best quality epoxy paint,

56 reflectorised with retro reflective sheeting as per lattes 6.00 12920.00 NO

M.O.S.T specifications. Letters and numerals should be

as per IRC 30-1968, 3.1m long stand post and frame may

be erected from 50 x 50 x 5mm as required and painted

with best quality epoxy coatings. The details of symbols

or inscription / numerals for board shall be as per

instruction of EIC. The fixing at site shall be in 1:2:4 CC

block of size 45 x 45 x 60 cm for each leg including

excavation concreting curing etc complete under

supervision of EIC.

[D] WATER SUPPLY AND DRAINAGE & MISC.

57 Providing laying and joining in true line and level UPVC

pipe (SCH-40) including fittings of PRINCE/ SUPRIME/

ASTRAL/ FINOLEX / ASHIRVAD / DUTRON or as approved

by EIC. Pipe shall be fixed on the wall with the help of

clamp at every 1200mm c/c or shall be concealed or

necessary excavation in trenches as directed including

necessary fittings including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of

all materials and necessary refilling the trenches,

dressing etc complete for 15mm dia pipe.

58 Providing laying and joining in true line and level UPVC

pipe (SCH-40) including fittings of PRINCE/ SUPRIME/

ASTRAL/ FINOLEX / ASHIRVAD / DUTRON or as approved

by EIC. Pipe shall be fixed on the wall with the help of

clamp at every 1200mm c/c or shall be concealed or

necessary excavation in trenches as directed including

necessary fittings including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of

all materials and necessary refilling the trenches,

dressing etc complete for 25mm dia pipe.

59 Providing laying and joining in true line and level UPVC

pipe (SCH-40) including fittings of PRINCE/ SUPRIME/

ASTRAL/ FINOLEX / ASHIRVAD/DUTRON or as approved

by EIC. Pipe shall be fixed on the wall with the help of

clamp at every 1200mm c/c or shall be concealed or

necessary excavation in trenches as directed including

necessary fittings including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of

all materials and necessary refilling the trenches,

dressing etc complete for 40mm dia pipe.

60 Providing & fixing to all ceiling and floor 6.00 Kg/Sqcm

PRINCE/ SUPRIME/ ASTRAL/ FINOLEX/

ASHIRVAD/DUTRON make rigid PVC pipes of the

following out side diameter, wall cleaps, etc including

necessary fittings like bend,shoes,Y,Tee,etc including

testing of pipes and jointed with adhesive solvent

cement including cost of all materials making good wall

celling and floor. For 75mm O.D.

61 Providing & fixing to all ceiling and floor 4.00 Kg/Sqcm

PRINCE/ SUPRIME/ ASTRAL/ FINOLEX/

ASHIRVAD/DUTRON or as approved by EIC rigid PVC

pipes of the following out side diameter, wall cleaps, etc

including necessary fittings like bend, shoes, Y, Tee, etc 50.00 149.00 RMT

including testing of pipes and jointed with adhesive

solvent cement including cost of all materials making

good wall ceiling and floor. For 90 mm Dia.

62 Providing & fixing to all ceiling and floor 6.00 Kg/Sqcm

PRINCE/ SUPRIME/ ASTRAL/ FINOLEX/

ASHIRVAD/DUTRON make rigid PVC pipes of the

following out side diameter, wall cleaps, etc including

necessary fittings like bend,shoes,Y,Tee,etc including 60.00 292.00 RMT

testing of pipes and jointed with adhesive solvent

cement including cost of all materials making good wall

celling and floor. For 110mm O.D.

63 Providing and fixing PVC SWR Nahani Trap IS 14735 for

drain with jali of the following nominal diameter of self

cleansing design with C.I. screed down or hinged grating

including the cost of cutting and making good the walls.

64 Providing and fixing approved quality S.W. gully trap

with C.I. Grating, brick masonry chamber and water tight

C.I. cover with frame of 300 mm x 300 mm size (inside)

with standard weight. (a) 150 mm x 100mm size P or R

65 Providing & fixing approved quality light type 450X600

mm size FRP Manhole covers with water tight FRP Frame

& having weight 41 KG/Sq.mtr with up to 5.0 MT

Capacity and fixing the same in concrete etc. complete

as directed by E.I.C.

66 Providing & fixing approved quality non-return full way

wheel valve 40MM DIA UPVC make PRINCE/ SUPRIME/

ASTRAL/ FINOLEX/ ASHIRVAD/DUTRON Make as 5.00 300.00 NO

approved by Engineer in charge.

67 Providing & fixing approved quality non-return full way

wheel valve 25 MM DIA UPVC make PRINCE/ SUPRIME/

ASTRAL/ FINOLEX/ ASHIRVAD/DUTRON Make as 5.00 150.00 NO

approved by Engineer in charge.

68 Providing and fixing approved quality screw down bib

tapes of following size: (A) Brass screw down bib tap

polished bright 15mm dia.

69 Providing & Fixing approved quality a set of 6 Nos. of

stainless steel coat racks of approved quality fixed on

mm. thick teak wood batten including 3 coats of oil 10.00 481.00 NO

painting etc., complete as directed by E.I.C

70 Providing & fixing approved quality light type 600X600

mm size FRP Manhole covers with water tight FRP Frame

& having weight 41 KG/Sq.mtr with up to 5.0 MT

Capacity and fixing the same in concrete etc. complete

as directed by E.I.C.

71 Providing and fixing approved quality C.P. Brass towel

rod complete with C.P. Brass brackets fixed to wooden

plugs with C.P. Brass screws. 600mmx20mm size

72 Providing and fixing approved quality 600mm x 450mm

bevelled edge mirror of superior glass mounted on PVC

moulded frame and fixed to wooden plugs with C.P. 10.00 851.00 NO

brass screws and washers.

73 Providing & fixing approved quality stainless steel sink

of size 600 X 450 mm including all necessary water

supply & drainage fitting as per instruction of E.I.C.

Waste water pipe shall be concealed only or otherwise

no payment shall be made.

(3) BORE AND WATER SUPPLY

74 Providing & fixing approved quality readymade P.V.C.

water tight storage tank of 1000 liters capacity made

from linear low density polythene & low density

polythene LDPF product confirming to I.S. : 10146-1982

with cover including providing & fixing one 20mm dia, 3.00 4099.00 NO

float valve ball-cock, one 20mm dia G.I. over flow pipe of

length up to 0.30 Mt. including making all connection for

inlet/outlet etc. complete as directed by E.I.C.

75 Providing and fixing approved quality wash basin of size

550x400mm flat back with single hold pillar tap with C.I.

or M.S. brackets painted white / colour including cutting

holes and making good the hole including Chromium

plated pillar tap, stop cock, PVC connection and GI waste

pipe to be concealed with Chromium bottle trap, stop

cock, fisher union, Brass waste pipe etc complete. Waste

water pipe(40mm dia) shall be concealed only or

otherwise no payment shall be made.

76 Providing and fixing wash down water closet (European

type, W.C. Pan) with integral P or S trap including

jointing the trap with soil pipe in Cement Mortar 1:1 (1-

Cement : 1-fine sand) (A) vitreous China Pattern :(i) in

white colour, with Providing and fixing 12.5 Litres low

level flushing cistern with a pair of C.I. or Mild brackets

complete with fittings Including Providing and fixing in

position with clamps etc. 32mm nominal internal

diameter galvanised steel tube flush pipe for high level

flushing cistern Including Providing and fixing plastic

seat and cover for wash down water closer with C.P.

brass hinges and rubber buffers.

77 Providing and fixing urinal of approved quality including

connection with trap and with integral longitudinal flush

pipe concealed outlet with S.S.bottle trap (A) squaring

plate pattern white earthenware 550mm x

300mm.Waste water pipe connection shall be

concealed only or otherwise no payment shall be made.

78 Providing B.B. Masonry inspection chamber for

underground CI inspection chamber and bends with

bricks heavy crushing strength not less than 35 kg/cm2

in CM (1:5), CI cover with frame (light duty) 455mm x

mm internal dimensions, total weight of cover with

frame to be not less than 38 kgs (weight of cover 23 kg

and weight of frame 15 kg). RCC top slab with 1:2:4 mix 12.00 3984.00 NO

(1cement: 2Coarse sand : 4 graded stone aggregate

mm size). Foundation concrete 1:5:10, inside plaster

mm thick with cement mortar 1:3 finished smooth with

floating coat of neat cement on walls and bed concrete

etc. complete. Inside dimensions 455mm x 610 mm up

to 900 mm deep.

TOTAL ESTIMATED COST

SCRAP RECOVERY AGAINST THE RS including all taxes

In Words :- One crore Three Lacs Three Thousand Five Hundred Fourty Nine Rupees and Sixety Three Paisa only.

NOTE: (1) Please note that change in commercial terms & conditions in (i) Section-A ”Instruction to Bidders” , (ii)

Section-C (Conditions of Contract), Caluse No.3 (Compensation for the delay) and clause No.6 (Action on default

by contractor) and (iii) Section-D (General Condition of Contract), Clause-37 (Rights of Owner), Clause-38

(Relationship with employee) and clause-39 (Conflict of Interest among Bidder/Agents)

Supt Engineer (TR),

GETCO: Circle Office, Jamnagar.

I/We have read and clearly understood the terms, conditions, Schedule ‘B’ and Technical specifications put by

GETCO on WEB site.

I/We hereby accept all the conditions and specifications of this tender document, and accordingly, I/We am/are

willing to carry out the work at _________________% (in words ______________percentage) above/below the

estimated cost. Accordingly the total amount of my/our tender works out to Rs.____________________

estimated cost. Accordingly the total amount of my/our tender works out to Rs.____________________

SIGNATURE OF CONTRACTOR.

(With rubber stamp/seal of the company)