Maint/repair of wooden furniture at furniture yard of BSO at Yol Cantt under GE (KH) YOL

Amount

Bed plywood Top (FD-246, FD-1102) Renewal of following old unserviceable parts of Bed plywood Top by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Long rails made out of Ist class well seasoned Ist class teak wood of size as per drawing, duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 1.01 but centre stiffner of bed plywood top.

All as per srl item No. 1.01 but complete headrest with legs and finished with veneered ply of bed plywood top.

All as per srl item No. 1.01 but complete footrest with legs and finished with veneered ply of bed plywood top.

Bed plywood 12 mm thick, 7 ply commercial BWR grade ISI marked to IS-303 type BB complete all as shown on drawing and as directed. Make:Century plywood/ Archid Ply/ Kitply

'L' type wooden bracket made of size 100x100x35mmm thick, to be fixed in the corner joints of long rail complete all as directed.

Table 900x600x760 mm with/WITHOUT drawer (FD-208, 209, 223, 224, 241, 242, 283 & 284) Removing existing worn out and unserviceable parts of the table as under and renewal of the same all as per drawings and making functional:

Legs made to the shape of 1st class teak wood duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 2.01 but long rail of table 900x600x760mm.

All as per srl item No. 2.01 but short rail of table 900x600x760mm.

All as per srl item No. 2.01 but stiffner short/long of table 900x600x760mm.

Renewal of unservicable 'L' type wooden bracket made of size 60x60x30mmm thick, to be fixed in the corner joints of table complete all as directed.

S&F New top for table 900x600x760mm made of prelaminated particle board exterior grade with one side teak faced and other white face of size 18/19mm thick including 4mm thick teak wood edging all around. complete all as shown on drawing and as directed. Make:Century ply/ Archid Ply/ Action Tesa.

Table Dining 6 Persons (FD-273, 239, 30, FD/MAP-II/03) Renewal of following old unserviceable parts of Table Dining 6 pers by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

S&F New legs made to the shape of 1st class teak wood duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 3.01 but long rail of table dining 6 pers.

All as per srl item No. 3.01 but short rail of table dining 6 pers.

'L' type wooden bracket made of size 100x100x35mmm thick, to be fixed in the corner joints of table complete all as directed.

S&F New top made out of pre-laminated particle board size 1500x900x19mm thick (OST) with teak face, made to shape with teak edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Table Dining 8 Persons (FD-273, 239, 30, FD/MAP-II/03) Renewal of following old unserviceable parts of Table Dining 8 pers by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

S&F New legs made to the shape of 1st class teak wood duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 4.01 but long rail of table dining 8 pers.

All as per srl item No. 4.01 but short rail of table dining 8 pers.

'L' type wooden bracket made of size 100x100x35mmm thick, to be fixed in the corner joints of table complete all as directed.

S&F New top made out of pre-laminated particle board size 1800x900x19mm thick (OST) with teak face, made to shape with teak edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Teapoy Wooden (FD-278, 232 & 382) Renewal of following old unserviceable parts of Teapoy Wooden by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

New legs made to the shape of 1st class teak wood duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 5.01 but long rail of teapoy wooden.

All as per srl item No. 5.01 but short rail of teapoy wooden.

All as per srl item No. 5.01 but stiffner short/long of teapoy wooden.

'L' type wooden bracket made of size 60x60x30mmm thick, to be fixed in the corner joints of table complete all as directed.

New top made out of pre-laminated particle board size 600x450x19mm thick (OST) with teak face made to shape with teak edging 4mm thick all round the top as per drawing after taking out old broken/ cracked top carefully complete all as specified and directed by Engr-in-charge.

Table Centre (FD-235, 274 & FD-375) Renewal of following old unserviceable parts of Table Centre by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

New legs made to the shape of 1st class teak wood duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 6.01 but long rail of table centre.

All as per srl item No. 6.01 but short rail of table centre

All as per srl item No. 6.01 but stiffner short/long of table centre.

'L' type wooden bracket made of size 60x60x30mmm thick, to be fixed in the corner joints of table complete all as directed.

New top made out of pre-laminated particle board size 900x450x19mm thick (OST) with teak face made to shape with teak wood edging 4mm thick all round the top complete all as specified and directed by Engr-in-charge.

Table Peg (FD-266, FD-384 & FD-277) Renewal of following old unserviceable parts of Table peg by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

New legs made to the shape of 1st class teak wood duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 7.01 but long rail of table peg.

All as per srl item No. 7.01 but short rail of table peg.

All as per srl item No. 7.01 but stiffner short/long of table peg.

'L' type wooden bracket made of size 60x60x30mm thick to be fixed in the corner joints of table complete all as directed.

New top made out of pre-laminated particle board, exterior grade of size 450x300x19mm thick (OST) with one side teak face and other side white made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Table Writing (FD-275, FD-33, 249 & FD-268) Renewal of following old unserviceable parts of Table Writing by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

New legs made to the shape of 1st class teak wood duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 8.01 but but long rail of table writing.

All as per srl item No. 8.01 but short rail of table writing.

All as per srl item No. 8.01 but stiffner short/long of table writing.

Back of table writing 6mm thick, 7 ply commercial ply wood BWR grade ISI marked to all as per drawings and as directed. Make:- Century ply/ Archid Ply/ Kitply

All as per srl item No. 8.05 but drawer of table writing.

All as per srl item No. 8.05 above side for table writing.

New top made out of pre-laminated particle board, exterior grade, one side teak face and other face white of size 1200x600x19mm thick made to shape with teak edging 4mm thick all round the top as per drawings complete all as specified and directed by Engr-in-charge.

New shelves made out of pre-laminated particle board, exterior grade, one side teak face and other face white made to shape as per drawings complete all as specified and directed by Engr-in-charge.

New shutters made out of pre-laminated particle board, exterior grade, one side teak face and other face white made to shape as per drawings complete all as specified and directed by Engr-in-charge.

Table Bed Side (FD-210, 248, 28, 276 & 1114) Renewal of following old unserviceable parts of TABLE BED SIDE/ BED SIDE (MAP) by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Back of table bed side 6mm thick, 7 ply commercial ply wood BWR grade ISI marked to all as per drawings and as directed. Make:- Century ply/ Archid Ply/ Kitply

Table shelves made out of pre-laminated particle board of size as per drawing (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Table side made out of pre-laminated particle board of size as per drawing (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Table top made out of pre-laminated particle board of size 450x350x19mm thick (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Table bottom made out of pre-laminated particle board of size as per drawing (OST) with one side teak face and other side white, made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Table dining (1200 x 900x760 MM) (FD/ MAP-II/03) Renewal of following old unserviceable parts of Table dining by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

New legs made to the shape of 1st class teak wood duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins, Screws including polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 10.01 but long rail of table dining 1200x900x760mm.

All as per srl item No. 10.01 but short rail of table dining 1200x900x760mm.

'L' type wooden bracket made of size 100x100x35mmm thick, to be fixed in the corner joints of table complete all as directed.

Table top made out of pre-laminated particle board, exterior grade of size 1200x900x19mm thick (OST) with one side teak face and other side white made to shape with teak edging 4mm thick all round the top as per drawing complete all as specified and directed by Engr-in-charge.

Chair Dining (FD-279, 203, 1105 and 228) Renewal of following old unserviceable parts of chair dining steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

M&L for removal of the existing broken/ unserviceable front leg of chair dinning and replacing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make serviceable. corners duly chamfered including provn of a PVC shoes of the new leg only, complete all as specified on drawing and as directed.

All as per srl item No. 11.01 but rear leg of chair dining.

All as per srl item No. 11.01 but back rest of chair dining.

All as per srl item No. 11.01 but front rail of chair dining.

All as per srl item No. 11.01 but back rail of chair dining.

All as per srl item No. 11.01 but side rail of chair dining.

All as per srl item No. 11.01 but bottom stiffner of chair dining.

Re-canning chair dining with plastic cane of ½ round 2.0mm wide & 0.40mm thick, woven in mat pattern and border round and back with 4mm wide of approved quality including removing of old canning, complete all as per drawing/ directed by Engineer-In–Charge.

Chair Writing (FD-280 & 250) Renewal of following old unserviceable parts of chair writing steel by replacing the same with new all as per drgs or sample kept in GE's office and making item serviceable:-

M&L for removal of the existing broken/ unserviceable front leg of chair writing and replacing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make serviceable. corners duly chamfered including provn of a PVC shoes of the new leg only, complete all as specified on drawing and as directed.

All as per srl item No. 12.01 but rear leg of chair writing.

All as per srl item No. 12.01 but back rest of chair writing.

All as per srl item No. 12.01 but front rail of chair writing.

All as per srl item No. 12.01 but back rail of chair writing.

All as per srl item No. 12.01 but side rail of chair writing.

All as per srl item No. 12.01 but bottom stiffner of chair writing.

All as per srl item No. 12.01 but arm rest of chair writing.

Recanning of chair writing with half round polythene cane 2.5mm wide 0.4mm thick for seat in Godrej pattern and border with 3.5mm wide 0.5mm thick finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing or as directed/ aproved by Engr-in-charge.

Chair Easy (FD-229, 201, 1108) Renewal of following old unserviceable parts of chair easy by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

M&L for removal of the existing broken/ unserviceable front leg of chair easy and replacing new part made out of 1st class hard wood teak duly shaped as per drawing and fixing with other member by Fevicol and bamboo pins including polishing to replaced part of wooden to match with existing part to make serviceable. corners duly chamfered including provn of a PVC shoes of the new leg only, complete all as specified on drawing and as directed.

All as per srl item No. 13.01 but rear leg of chair easy.

All as per srl item No. 13.01 but arm rest of chair easy.

All as per srl item No. 13.01 but replacing front seat frames of chair easy.

All as per srl item No. 13.01 but replacing rear seat frames of chair easy.

All as per srl item No. 13.01 but replacing any one side rail of seat frame of chair easy.

All as per srl item No. 13.01 but replacing top or bottom rail of back rest frame of chair easy.

All as per srl item No. 13.01 but replacing any one side rail of back frame of chair easy.

All as per srl item No. 13.01 but replacing front rail of seat frames of chair easy.

All as per srl item No. 13.01 but replacing rear rail of seat frames of chair easy.

Recanning of chair easy with half round polythene cane 2.5mm wide 0.4mm thick for seat in Godrej pattern and border with 3.5mm wide 0.5mm thick finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing or as directed/ aproved by Engr-in-charge.

Table dressing ladies with mirror (FD-32(M), 251, 378 & FD/MAP-II/07) Renewal of following old unserviceable parts of Table dressing ladies with mirror/ Table dressing ladies with stool by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

Mirror 1220mm H x388mm W x 5mm Thick electro copper plated mirror totally free from distortion, frame in teakwood size made of 25X20mm alround and 4mm thick BWR Grade 3 ply commercial plywood type in the back all as shown on drawings. Make:- Modigaurd/ Saint gobin/ AIS

Vertical member made of 1st class teak wood of size 35x45mmx1450mm made to shape of table dressing ladies and duly planed and wrought on all side all as per drawings.

Bottom base with legs made to shape and size of table dressing ladies. Complete all as shown on drawing and as directed.

Doors/Sides made of pre-laminated particle board exterior grade with one side teak faced and other white face of size 18/19mm thick including 4mm thick teak wood edging all around. complete all as shown on drawing and as directed. Make:- Century ply/ Archid Ply/ Action Tesa

New top of table made of prelaminated particle board exterior grade with one side teak faced and other white face of size 19mm thick including 4mm thick teak wood edging all around all as per drawings. The fixing and finishing shall be done in accordance with drawings, standard workmanship and as directed by Engr-in-Charge.

New heavy duty revolving nylon wheel superior quality in base of stool of trable dressing ladies (MAP only) complete all as shown on drawing and as directed

M&L of replacement telescopic channel for drawer of table dressing ladies (only for MAP) made of supiror quality duly fixing with screws. complete all as shown on drawing and as directed. Make:- Century ply/ Archid Ply/ Action Tesa

S&F removable cushions of stool (for table dressing map only), cushions shall be 360x310x75mm of 40 density covered with superior quality leatherite (shall not be less than RS: 250.00 per mtr) and shall be as per sample kept in BSO’s office of shade as approved by GE / Engineer in charge. Rest all as per drg. Make:- Sleepwell/ Kurlon / Featherlite

M&L of replacement of 6mm thick sliding Glass of size 300mmx290mm in 20mm 2 way aluminum channel 580mm long in two pieces fixed all as shown in drawing and as directed. The edges of glass will be grounded and rounded.

SIDE BOARD (FD-241, 242, 26 & 1112) Renewal of following old unserviceable parts of SIDE BOARD by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

M&L of replacement top of side board made of pre-laminated particle board exterior grade with one side teak faced and other white face of size 18/19mm thick including 4mm thick teak wood edging all around. complete all as shown on drawing and as directed. Make:- Century ply/ Archid Ply/ Action Tesa

All as per srl item No. 15.01 but door/shutters of side board.

All as per srl item No. 15.01 but bottom of side board.

All as per srl item No. 15.01 but shelves of side board.

All as per srl item No. 15.01 but sides of side board.

M& L of replacement of Back of side board 6mm thick, 7 ply commercial ply wood BWR grade ISI marked to all as per drawings and as directed. Make:- Century ply/ Archid Ply/ Kitply

All as per srl item No. 15.06 but drawers of side board.

S&F new steel bow handle of 100 mm long superior quality. complete all as shown in drawing and as directed.

S&F new knobs of superior quality. complete all as shown in drawing and as directed.

Replacement of existing unserviceable broken base/legs and fixed new legs/base complete all as shown in drawing and as directed.

HAT STAND WITH MIRROR (FD-233, 361 & 1110) Renewal of following old unserviceable parts of hat stand with mirror by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

S&F new Mirror of size as per drawing, electro copper plated mirror totally free from distortion, frame in teakwood size made of 25X20mm alround and 4mm thick BWR Grade 3 ply commercial plywood type in the back all as shown on drawings. Make:- Modigaurd/ Saint gobin/ AIS

M& L of replacement of Back of hat stand 6mm thick, 7 ply commercial ply wood BWR grade ISI marked to all as per drawings and as directed. Make:- Century ply/ Archid Ply/ Kitply

BOOK CASE OPEN (FD-336, 237 & 355) Renewal of following old unserviceable parts of BOOK CASE OPEN by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

M&L of replacement top of book case made of prelaminated particle board exterior grade with one side teak faced and other white face of size 18/19mm thick. complete all as shown on drawing and as directed. Make:- Century ply/ Archid Ply/ Action Tesa.

All as per srl item No. 17.01 but door/shutters of book case.

All as per srl item No. 17.01 but bottom of book case.

All as per srl item No. 17.01 but shelves of book case.

All as per srl item No. 17.01 but side of book case.

M& L of replacement of Back of book case with 6mm thick, 7 ply commercial ply wood BWR grade ISI marked to all as per drawings and as directed. Make:- Century ply/ Archid Ply/ Kitply

Replacement of existing unserviceable broken base/legs and fixed new legs/base, complete all as shown in drawing and as directed

SOFA SET THREE SEATER LONG PIECE (FD-1113, 281, 258 & FD/MAP-II/02) Renewal of following old unserviceable parts of sofa set three seater long pease by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

M&L of taking down broken/damaged leg of sofa and supply and fixing leg made of 1st class hard wood (teak) duly shaped as per drawing and fixed in position with other member by Fevicol and bamboo pins including two coats of polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 18.01 but side plank of sofa set.

All as per srl item No. 18.01 but bottom stiffner support of sofa set.

All as per srl item No. 18.01 but handle/ arm rest of sofa set.

All as per srl item No. 18.01 but centre stiffners of sofa set.

M&L of taking down broken/damaged ply of seat of sofa set and supply and fixing plywood made of 12mm thick, 7 ply commercial ply wood BWR grade ISI marked. Make:- Century plywood/ Archid Ply/ Kitply

SOFA CHAIR SINGLE SEATER (FD-1113, 281, 258 & FD/MAP-II/02) Renewal of following old unserviceable parts of sofa chair single seater by replacing the same with new all as per drawings or sample kept in GE's office and making item serviceable:-

M&L of taking down broken/damaged leg of sofa and supply and fixing leg made of 1st class hard wood (teak) duly shaped as per drawing and fixed in position with other member by Fevicol and bamboo pins including two coats of polishing to replaced part of wooden to match with existing part complete all as shown on drawing and as directed.

All as per srl item No. 19.01 but side plank of sofa set.

All as per srl item No. 19.01 but bottom stiffner support of sofa set.

All as per srl item No. 19.01 but handle/ arm rest of sofa set.

All as per srl item No. 19.01 but centre stiffners of sofa set.

M&L of taking down broken/damaged ply of seat of sofa chair single seater and supply and fixing plywood made of 12mm thick, 7 ply commercial ply wood BWR grade ISI marked. Make:- Century plywood/ Archid Ply/ Kitply

CUSHION COVER S&F removable cushions cover of sofa set, cushions shall be 21” x 22” x 4” of 40 density. The cover shall be made of superior quality tapestry cloth (with a minimum cost of RS: 300.00 per mtr). The cushion cover shall feature double-stitched seams for enhanced strength and longerity, alongwith a high quality concealed zipper for easy removed and replacement.

CUSHION OF SOFA S&F removable cushions of sofa set, cushions shall be 21” x 22” x 4” of 40 density covered with superior quality tapestry cloth (shall not be less than RS: 300.00 per mtr) and shall be as per sample kept in BSO’s office of shade as approved by GE / Engineer in charge. Rest all as per drg. Make:- Sleepwell/ Kurlon / Featherlite

POLISHING OF WOODEN ITEMS Scratching the entire wooden pallets of chair with electric grinder, filling putty to the bore holes making surface smooth by scratching it with different type of sand emery papersr, the chair shall be french polished with high gloss finish after properly cleaning and smotthing the surface, complete all as specified and as directed. for following items :-

Bed plywood top (FD-246)

Table 900x600x760mm with and without drawer (FD-208, 209, 223, 224, 241, 242, 283 & 284)

Table dining six persons (FD-273, 239, 30 & FD/MAP-II/03)

Table dining eight persons (FD-273, 239, 30 & FD/MAP-II/03)

Teapoy wooden (FD-232, 278 & 382)

Table centre (FD-235, 375 & 274)

Table peg (FD-266, 384 & 277)

Table writing (FD-249, 33, 275 & 268)

Table bed side (FD-210, 248, 28, 276 & 1114)

Table dining 1200x900x760mm (FD/MAP-II/03)

Chair dining (FD-279, 228, 203 & 1115)

Chair writing (FD-280 & 250)

Chair easy (FD-229, 201 & 1108)

Table dresing ladies with mirror (FD-32(M), 251, FD-378 & FD/MAP-II/07)

Side board (FD-241, 242, 26 & 1112)

Sofa chair single seater (FD- 1113, 281, 258 & FD/MAP-II/02)

Hat stand with mirror (FD-233, 361 & 1110)

Book case open (FD-336, 237 & 355)

Sofa set three seater long piece (FD- 1113, 281, 258 & FD/MAP-II/02)

vivek and co (BID ID -3294545)

ASHOK KUMAR JAIN (BID ID -3296698)

M/S MALHI CONSTRUCTIONS (BID ID -3296455)