RE ROUTING 11KV LINE WITH ABC, PEELIPAPPAN-MATTATHINANI

Errecting HT A type pole as support pole ABC stringing work -2436/-

Errection and commissioning of street light metering with timer

Stringing of 11 kV Aerial bunched cable of size 3 x 120 + 1 x 95 sqmm with bare/insulated Messenger through existing poles

Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 poles excluding loading & unloading.

Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle).

Loading HT A type pole from the stacking place and unloading the same at work site (transport by vehicle).

Erecting one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excluding transportation.

Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT & LT connections on existing DP, 3 LT fuses.

Fitting one set AB switch and giving connection

Erection of Anchor clamp / dead end clamp for 11kV ABC of any size

Erection of suspension clamp for 11KV ABC of any size

Fitting and erecting one HT DP using A type pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads.

Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all material (as per specification).

Providing Transformer fencing , using 50x50x6mm Angle iron, 40 x 6 mm MS flat and 8 mm MS rod as specified, incl cost of transportation & foundation

Providing yard metalling with 6mm & 40mm thick blue metal as specified after constructing a curb wall.

Providing one Earth using earth pipe incl. digging separate pit at standard distance away from the pole/structure & backfilling.

Providing Cable Tie

Fitting and providing one HT Stay for 11kV pole incl. digging & back filling pit.

Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole incl. digging & back filling pits.

Fitting and providing one Strut using HT PSC pole incl. digging & back filling pit.

Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/structure & backfilling.

Drilling hole of various sizes on existing Channel/Cross Arm.

Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt&nut etc.

Erecting one LT PSC Pole in position incl. digging & back filling pit.

Additional rate for refitting/redoing one Shackle set and reshackling one span while renewing any type of pole.

Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole.

Dismantling one damaged 11kV TW/RSJ/Rail pole after disconnecting stays, strut etc. and stacking the same.

Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion.

Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion.

Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one km 11kV line (3 conductors), cross arm, insulators, disc, rolling the conductor and stacking.

Stringing of 1.1 kV Aerial bunched cable of size 3 x 70 + 1 x 16+1x 50 sqmm with bare/insulated Messenger through existing poles

Providing Stay for LT poles incl. digging & back filling pit.

Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same.

Dismantling (without damage) one km LT 3ph 4 wire OH line, cross arms, insulators and stacking the conductors in rolls.

Dismantling one Transformer (upto and incl. 160kVA) from existing structure to ground.

Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole incl. conveyance of materials.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.

Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.

Additional rate for excavation of Pit for A type pole in Laterite.

Additional rate for excavation of Pit for A type pole in Hard Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Laterite.

Additional rate for excavation of one Earth Pit (2.5m depth) in Hard Laterite.

Errecting 9M PSC pole as support pole for ABC stringing work

Fiting One no MVT on existing cross arm including 2 nos end termination (for One phase) of any rating for 11 kV AB Cable

Pole numbering using printed Aluminium sheets / Painting the surface of pole with anti algal yellow paint and painting Letters with black paint as specified incl. cost of paint.

Brick work in cement mortar for superstructure as per the direction of departmental staff.

Doing straight joint on cables of sizes upto and incl. 3x185 sqmm using the cable jointing kit supplied departmentally as per specification.

Erection of suspension clamp for LT ABC of any size

Erection of Anchor clamp / dead end clamp for LT ABC of any size

Installing one DTR Meter with box on existing poles and giving the complete connections incl. conveyance of materials.

Errection and commissining of street light metering with timer