SPECIAL REPAIRS TO BLDG NO P-102 OF 442(I) SUP PL ASC AND PROVN OF URINAL POINT WITH WASH BASIN OF 811 ENGR REGT AT LANCER LINE UNDER GE (ARMY) BARODA

Amount

Taking down chowkhats of frame with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc. 4 Sqm each

Ditto as per item no 1.00 above but area n.exc 1.5 Sqm each

M&L Pressed steel frames of section 125X60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strick plate etc completed all as specified.

Supply & fix flush shutter of 30 mm thick solid core construction, with block board core and ply core and ply wood with commerical type both side and bothside face is cobered with deco rative face vaneer with lipping/frame to match complete all as specified and directed.

M & L 35 mm thick 2nd calss hard wood (factory made) glazed and skeleton shutters, open rebated and prerpared to receive glass, gauge, etc edges of trimming plain chamfered of rounded fitted with cut and metered beads for securing/gauge etc sizes of members of shutters as specified in SSR Part-I section 8.20 (a) and all as specified.

S&F 300 mm aluminium alloy, anodised sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and staples.

S&F aluminium alloy handle 150 mm cast type anodised all as specified.

S&F 150 mm aluminium anodised barrel tower bolts of extruded section and fixed.

M&L for preparation of newly wooden surface of any description not otherwise descsribed over 10 cm width of girth with two coats of synthenic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of newly steel surface of nay description not otherwise described over 10 cm width or girth with two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with tinned tacks of galvanized wire staples and wooden bedding.

M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate as in coping bed plate for hold fast etc including necessary from work etc complete all as specified and directed.

S &F in repairs 15 mm bore CP stop cock/Angle cook cast copper alloy, fency type screwed down high pressure with capston head screwed for iron pipe.

S& F in repairs CP bib tap fancy type 15 mm bore cast copper alloy with round operatin knob screw down screwed for iron pipe and fixed in repairs completed all as specified.

Taking down 15 mm dia steel tubing and connection including cleaning for refixing the same in new of old position all as directed of following size on wall and ceilling.

S&F galvanised iron tubing of 15 mm dia (ISI marked) medium grade including all necessary fitting and fixed to wall/ celling or laid in floor jointed with necessary fitting and fixed to wall / ceilling or laid in floor jointed with tuflon tape all as specified.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperature 1.40mm dia and fixed with tinned tacks of galvanized wire staples and wooden bedding and fixed .

Demolition of stone slab of any description of thickness in floor, aprons etc. Laid bedded and pointed in any mortor complete.

M&L machine cut kota stone slabe flooring 18-20mm thick size not less than 550x 550 mm over 20mm thick screed in CM 1:6 base laid and jointed in grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.

All as per item No 19.00 but as in skirtig/dado, dteps of stairs etc on 15mm thick plastering in CM 1:6 and all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (But no caking) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for glazed ceramic coloured wall tiles in vertical surface 300x200/350x250/450/350mm & 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down cement plaster form brick/concrete surface including racking out joint hacking for key scrubbing down with water etc complete all as specified and directed.

M &L for 15 mm thick rendering in cement mortor 1:6 or birck work or concrete surface on wall finished even and smooth without using extra cement complete.

M&L for preparation new plastered surface of walls and applying two coats of oil emulsion distemper over 1-1.5 mm thick wall care putty on wall complete all as specified and as directed.

M & L for complete removal of exisiting treatment on wall surface and apply two coat of oil bond distemper over 1-1.50 mm thick wall care putty and priming coat complete as specified.

M&L for prepartion of newly plastered surface of wall and applying two coat of cement base paint over a coat of alkaline resistant primer complete all as specified.

M&L for 16-18 mm thick green marble in one piece machine cut as in cooking plate from, steps window cills and like set and jointed in grey cement slurry and pointed in coloured cement (1:2) using marble dust with admixture of pigment of make with marble shade, laid over and including 15mm thick screed bed in cement mortor 1:4 complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15 cm thick (Above of below GL) comlteted all as specified.

Demolition of birck work built in cement morter including all quoins, arches, pillars etc, complete.

Demolation reinforced cement concrete of any description and in any position not otherwise specifically provided for.

Material & labour for birck work with bricks built in Cm (1:6) straight or curved exceeding 6 mtr mean radius complete all as specified and directed.

M&L cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregate 75 mm thick for laying of floor etc complete all as specified and directed.

Supply & fixing mild steel framed work such as grills, grating etc with end of bars shouldered and or riveted welded forged into spikes, framed gaurd bars, MS flats, railings and similar work complete conforming to Fe-290 Gde E-165 complete all as specified & directed.

M&L for reinforced cement concrete type B1 1:2:4 (20 mm graded stone aggregate) nominal mix as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the and all as directed by Engr-in-Charge

Formwork to sides and soffits of floor beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc,. Also splays between floors and beams, etc

Supply and fix in repairs PVC (SWR) floor/gully trap of size 125/110mm setting and jointing with solvent cement.

Taking down eaves gutters and rainwater pipes (any size or pattern) including all fittings and accessories all specified.

S&F 110mm bore PVC(SWR) pipes singles socketed in any length with rubber ring joints fixed to wall.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall.

S&F 110mm bore PVC(SWR) pipes T equal or unequal with over acces doors with rubber ring joints fixed to wall.

S&F 75 mm bore PVC(SWR) bends with ovel acces doors with rubber ring joints fixed to wall.

S&F 75mm bore PVC(SWR) pipes T equal or unequal with over acces doors with rubber ring joints fixed to wall.

M&L 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement.

M&L 110 mm dia PVC (SWR) vent cowl including jointing with solvent cement.

Provion and application by brushing of treatment of reinforcement by application of corrosion resisting coat in two coats, suitabel time to be provided between coats according to manfactures instructions to resist further deteroriation of reinforcement etc complete according to instruction of Engr-in-charge. Make Fosroc/piditlite of equivalent.

Provsion and application of approved epoxy based bond coat on concrete surface or sound bounding of cold and new concrete surfaces according to instructions of engineer in chagre make Fosroc/piditlite or equivalent.

Marking of profile of structral memebers with polymer modified mortar in damage area 1:3 (Cement : Sand) mortal with 5-10 percentage addition of latex polymer, w/c ratio of 0.35 in 20 mm thk layers/including leveling etc complete. Make Fosroc/Pidilite or equivalemt.

Material and labour for complete removal of loose/cracked concrete including reinforcement if required from RCC roof projection, chajja, fins facia etc and making good with PCC (1:1 5:3) type A0 using 12.5mm graded aggregate in any slab and in any position finsihed the surface even and smooth with out using extra cement including necessary formwork and weldign/binding of reinforcement (including reinforcement) if required complete and applying 3 coats of white wash/2 coasts base paint to match with existing surfaxes as directed by Engineer in chagre complete note reinforcement will be measured and pai seperately under respective items)

Material and labour MS TMT bars 8-10 mm dia, cut to length bent to shape required including cranking/binding/hooping of coloumns/hooking ends and binding with and including MS wire (annealed) not less then 0.9 m dia or securing with clips complete.

Supply only water proofing compound.

Complete removal of exising water proofing treatement including plaster and concrete pedding roughening of concrete surface cleaing and washing down the surface with water removing/rubbish out side MD land complex.

M & L for 50 mm average thick padding with cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate finished even and smooth without using extra cement.

M & L for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops rounded or chamfered on edge including necessary form work complete.

M & L for water proofing treatment to roof slab by appling one coat of bituminous/poly merized primer confirming ot IS-3384 i.e 0.30 litre/sqm and laying actetic poly propylene (APP) modified membrane pre febricated reainforced with non wovan ployester of minimum 3.50 kg/sqm 3 mm thick(minimum) with minimum 75 mm side overlap and minimum 100mm end overlaps and applying one coat of bituminous aluminium paint over APP membrance complete all as specified and directed.

Excavating in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation etc n.exc 10 sqm on plan and n.exc 1.5 m in depth and & getting out in soft/loose type of soil.

Excavation over area in soft/loose soil n.exc 1.50mt deep and getting out in soft/loose soil complete all as specified

M&L PCC (1:4:8 ) type D2 using 40mm graded stone aggregate in foundation filling and mass concrete

M&L reinforcement cement concrete M-20(20mm graded stone aggregate) as in foundation ,footings and plinth beams etc as directed.

M&L reinforcement cement concrete M-20(20mm graded stone aggregate) as in columns ,pillars,posts etc as directed.

M&L reinforcement cement concrete M-20(20mm graded stone aggregate) as in ,beam, lintel , seismic and other similar works etc.

M&L reinforcement cement concrete M-20 (20mm graded stone aggregate) as in roof beams ,roof slabs roof facia etc as directed.

M&L form work to sides of concrete foudation, base of columns, and raft beams.plinth beametc. on flat faces as directed

M&L form work to sides of columns, of rough finished surface of concrete flat faces as directed

M&L form work to sides and soffits of floor or roof beam hauchings , lintels, cantilevers,etc. of rough finished surface of concrete flat faces as directed

M&L form work to soffits of suspended such as roof slabs, floor slabs, landings and similars works for flat rough surfaces as directed

Use and waste of form work to edges of concrete exc 10cm but n. exc.20cm wide

S&F MS steel TMT bars 10mm dia and over cut to length ,bent to shaprequired including cranking bending for hooping for column ,hooking ends and bindings with and including mild steel wire (annealel)not less than 0.9mm dia.

S&F MS steel TMT bars 6mm dia and over cut including 10mm dia as in stirrups cut to length ,bent to shaprequired including cranking bending for hooping for column ,hooking ends and bindings with and including mild steel wire (annealel)not less than 0.9mm dia.

Returning filling in including spreading, leveling, watering and well ramming in layer n exc 25cm

Removing excavated material/soil n exc 250M and n. exc 500M and depositing where directed at a level n exc 1.5M above the starting point

M&L for rendering 15mm thick on the fair faces of brick work or concrete surfaces in CM (1:4) finished even and smooth without using extra cement

M&L for rendering 10mm thick on ceiling in cm (1:3) finished even and smooth without using extra cement

Supply and filling of approved earth from out side of MD land filling floors or paving laid in layer n.exc 15 cm thick , spread, levelled and rammed including watering complete all as specified

M&L 150 mm micron polythene film complete all as specified and directed.

M&L sand filling under floor or in foundation including watering and consolidation in layer n.exc 25cm thick complete all as specified

M&L for Hard core of gauge n. exc.63 mm of Broken stone or boulders, deposited spread and levelled in layer n.exc 15cm thick,watered and rammedto a true surface complete all as specified.

M&L for 75mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base as directed.

M&L for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in leveling coarse to receive floor finished etc.

M&L for non skid ceramic coloured tiles 300mm x 300mm x 7mm thick in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface

M&L for 20mm thick screed bed in CM (1:4) to receive floor finishes

M&L for ceramic tiles 375 mm x 300mm x 6mm thick in dado, skirting etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface

M&L for rendering 10mm thick on the fair faces of brick work or concrete surfaces in CM (1:4) on vertical surface

S&F steel ventilator with top hung shutters including projecting type hinges with steel handle and steel peg stay, complete with glazing bars dovetailed or welded

S&F 3 mm thick figure glass pin head type and glazing with oil putty in square n.exc 0.5sqm in each pane.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheets, reinforced with MS square tube, supplying and fixing in opening as per specification and drawiing. The door frame shall be fixed to the wall using 75/100mm long MS screws complete.

Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat rounded plain colour PVC :C: channel having a PVC sheet strip & 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert to top rail & bottom rail. Paneling of plain colour sheet to be fitted in the MS frame welded/sealed to athe satiles & rails with suitbale PVC sheet beadding and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawings.

S&F stainlees steel butt hinges 100mm medium weight

S&F aluminum alloy anodized sliding door bolt with hasp, staple and fixing clip of sheet cast or extruded section and fixing bolts etc complete 200mm long

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/PVC door frame with screw complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type D2 (using 40mm graded stone aggregate) as in plinth protection etc

S & F galvanised steel water tubing of 20mm dia medium grade with all necessary fitting; and fixed to wall /ceiling or in floors of size:-

S&F vitreous china urinal bowel type (Back type) complete including providing and fixing plugs. Bedding urinal against wall in cement mortar 1:2 securing urinal to plug with and including 60mm long brass screw pointing around urinal back in cement fixing automatic flushing cistern with brocket. Flush pipe grating and for discharge pipe.

S&F vitreous china Wash hand basin, white , flat back size 550x400 mm incl brackets and CP waste coupling complete.

S&F pillar tap cast copper alloy with capstan heads screwed down high pressure, with lettered "Hot or Cold" with long screwed shanks and fly nuts screwed for 15 mm bore pipe complete all as specified.

S&F Rotational moulded polythylene water storage tanks (double layered,cylinderical vertical with close top) 500 ltr capacity hoisted and fixed in position complete all as specified.

S&F ball brass valve high pressure with polythene float and flynut screwed for iron pipe or brass pipe or ferrule and fixed for 20mm bore dia of pipe complete all as specified.

S&F CP bib taps cast copper alloy with crutch or butter fly handle screwd for 15mm bore dia iron pipe or for brass ferrule and fixed complete all as specified.

S&F CP15 mm stop/angle valve cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends of iron pipe or for unions and fixed complete all as specified.

S&F brass chromium plated tubular towel rail 20mm dia ''D'' Type 60cm long between flanges complete all as specified.

S&F PTMT grating suitable for size 150mm x 150mm

S&F 32mm bore PVC waste coupling with pipe for WHB complete all as specified

M&L preparing newly plastered surface of ceiling and applying three coat of white wash complete all as specified.

S&F 100mm dia cast iron soil, waste and vent pipe with or without airs, with cement joints fixed to wall complete all as specified

S&F 75mm dia cast iron soil, waste and vent pipe with or without airs, with cement joints fixed to wall complete all as specified

S&F 75mm dia CI band (any radius) with oval access door complete all as specified

S&F Salt glazed stone were gully traps squire of size 150mm x 150mm

OM Engineering

Parul Enterprise

CENTAUR ENGINEERS