Construction of Government Senior Secondary School building at Panjalag Tehsil Lad-Bharol District Mandi (H.P.)

Amount

Excavation in foundation, trenches, etcetra in earth work in all kinds of classification, of soils such as pick work, jumper work blasting work saturated soils including chiseling or any other mixed variety of soils, dewatering and / or removal of slush and other incidentals, lift up to any height stacking excavated soil up to all leads and lifts clear from the edge of excavation and then returning the stacked soil in fifteen centimetre thick layer when required into plinths, sides of foundation etcetra consolidating each deposited layers by ramming and watering and then disposing of all surplus excavated earth to the disposal point within all leads and lifts complete in all respect.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including with in all leads, lifts, carriage of material and other incidental charges complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation, footings bases of columns etcetera and mass concrete including carriage of materials within all leads and lifts and other incidentals complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surface such as soffits of suspended floors, roofs, landings and the like upto any thickness including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square, rectangular, polygonal in plan including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beam, cantilever, girders and lintels, sides and soffits of beams beams haunching below supporting cantilevers girders bressumers and lintels of any depth including carriage of materials within all leads and lifts complete in all respect.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetra with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with slopping or stepped soffits, excluding landing but including carriage of material within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing form work with steel plates 3.15mm (Three point one five millimetre) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimetre) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls of any width including carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.

Providing and laying cement concrete 1:4:8 (One cement : Four sand : Eight graded/crushed crushed stone aggregate 40mm (Forty millimetre) nominal size) mechanically mixed, vibrated and curing complete excluding cost of form work in foundation and plinth including carriage of materials within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation footings bases of coloumns and the like and mass concrete including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in columan pillar posts and sturts upto all floor level including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in lintels beams girders bressumer and cantilevers upto all floor level including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in suspended floors roofs landing and shelves and their supports balconies,beams girders bressumer and cantilevers upto all floor level including carriage of material within all leads and lifts complete in all respect.

Providing and laying cement concrete 1:1.5:3 (one cement : one and half sand : three graded/crushed stone aggregate 20mm (twenty millimetre) nominal size and curing complete excluding cost of form work and reinforcement for reinforced concrete work in stair case including landing etcetera upto any floor level including carriage of material within all leads and lifts complete in all respect.

Providing and laying M-20 grade of cement concrete mechanically mixed and vibrated with minimum cement content 320 Kg. (Three hundred twenty kilogram) per cubic metre with graded/crushed, crushed stone aggregate 20mm (Twenty millimetre) nominal size to give a smooth and even surface including centering and shuttering etcetera but excluding cost of reinforcement in mouldings cornices windows sill etc not exceeding 15cm (fifteen centremetre) in girth including curing complete and carriage of material within all leads, lifts and other incidental charges complete in all respect.

Providing and laying damp proof course 50mm (fifty millimetre) thick cement concrete 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate 20mm (twenty millimetre) nominal size) and curing complete including carriage of materials within all leads and lifts in all respect.

Applying a coat of hot bitumen (maxphalt 80/100 (eighty upon one hundred) equivalent) using 1.70 kg (one point seven zero kilogram) per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosine oil including carriage of materials within all leads and lifts in all respect.

Providing Tor steel reinforcement for RCC work including bending binding and placing in position including cost of binding wire complete in all floors including carriage of materials within all leads and lifts complete in all respect.

Square rubble masonry coursed with hard stone of approved quality/quarry in foundation and plinth including racking out joints in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads and lifts complete in all respect.

Second class brick work using common burnt clay building bricks of approved kiln in super structure upto all height and depth in cement mortar 1:6 (one cement : six sand) including curing complete and carriage of materials within all leads and lifts complete in all respect.

Second class half brick masonry in common burnt clay building bricks of approved kiln in super structure above plinth level upto floor all level in cement mortar 1:4 (One cement : four sand) and curing complete including carriage of materials within all leads and lifts complete in all respect.

6mm (six millimeter) thick cement plaster to ceiling with cement mortar 1:4 (one cement : four sand) including curing and carriage of materials within all leads and lifts complete in all respect.

15mm (fifteen millimetre) cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect.

15mm (fifteen millimetre) cement plaster in single coat on the fair side of brick/concrete/stone walls for interior/exterior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth in cement mortar 1:6 (one cement : six sand) including curing and carriage of materials within all leads and lifts complete in all respect.

25mm (twenty five millimeter) thick kota stone slab flooring 20mm (twenty millimeter) thick base of cement mortar 1:4 (one cement : four sand) laid over and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and carriage of material within all leads and lifts complete in all respect.

Kota stone slab 25mm (twenty five millimeter) thick in risers of steps, skirting dado and pillars laid on 12mm (twelve millimeter) (average) thick cement mortar 1:3 (one cement : three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing including carriage of material within all leads and lifts complete in all respect.

Providing and laying marble works (table rubbed and polished) in flooring 20mm (twenty millimetre) thick base in cement mortar 1:3 (one cement : three sand) including jointing with cement mortar 1:2 (one white cement : two marble dust) with an admixture of pigment to match the shade of the marble 20mm (Twenty millimetre) thick white makrana marble as per design and drawing as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Clip- in wooden flooring/cement concrete base with polythine sheet and thermo sheet cushion below complete including carriage of materials within all leads and lifts in all respect..

Providing and laying viterified tiles in flooring treads of steps laid on a bed of 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement as per satisfaction of Engineer-In-Charge upto floor all level including carriage of materials within all leads and lifts complete in all respect.

White glazed tiles 6mm (six millimetre) thick in skirting riser of steps and dado 12mm (twelve millimetre) thick cement mortar 1:3 (one cement : three sand) and jointed with cement slurry complete upto all floor level in all respect including carriage of materials within all leads and lifts.

Steel work welded in built up sections trusses and framed work including cutting, hoisting, fixing and launching in position and applying a priming coat of red lead paint in trusses and trussed purlins in buildings including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 85cm (eighty five centimetre) height railing with MS rectangular hollow pipe 75x50mm (seventy five into fifty millimetre) of 14 (fourteen) gauge M.S.black sheet make hand rail and M.S. square bars 20mm (twenty millimetre) size ballusters at 30cm (thirty centimetre) centre to centre duly welded with to 2Nos. (two numbers) MS flate 40x6mm (forty into six millimetre) size and 20mm (twenty millimetre) M.S. square bars lugs 10cm. (ten centimetre) long at lower end of ballusters embeded in RCC steps or waist slab including priming coat of steel primer and painting with steel enamal paint other than white as per design and instruction of Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing M.S. railing for stair case having bulluster of 20mmx20mm (twenty millimetre into twenty millimetre) and 12mm ( twelve millimetre ) M.S. flat/M.S. solid squar bar with a clear height of 85cm (eighty five centimetre) @ (at the rate) 60cm (sixty centimetre) centre to centre jointing in cement concrete steps and jointing with electrical/ gas welding at top along with hand rail of 75mmx65mm (seventy five millimetre into sixty five millimetre) vertical balluster welded/jointed with each other with 2Nos( two number) M.S. flat of 40x6mm( forty into six millimetre) complete with a applying priming coat of red lead paint as per specification and as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing M.S. angle iron door, window,clerestory window manufactured fromM.S. angle iron section of 40x40x6mm (forth into forty into six millimetre) thickness including hinges jambs, lock jambs beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by machanical means, lugs with split end tails to each jambs including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing standard steel section of ISMC and flat iron doors, windows and clerestory window manufactured from ISMC iron section 75x40mm (seventy five into forty millimetre) with MS flat iron section of 75x4mm (seventy five into four millimetre) thick including hinges, jambs, lock jamb,beed and if required angle thrashold of mild steel angle 50x25mm (fifty into twenty five millimetre) welded or rigidly fixed by machanical means, lugs with split end tails to each jambs including steel butt hinges 2.5mm (two point five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pre treatment of the surface as directed by Engineer-In-Charge including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing steel glazed doors, windows, and ventilators of standard rolled steel sections, joints mitred and welded with (Manufactured to relevant I.S. standard specifications) 16x3.15mm (Sixteen into three point one five millimetre)lugs 10cm (ten centimetre) long embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimetre)size of 1:3:6 (One cement :three sand :six graded/crushed crushed stone aggregate twenty millimetre nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of projecting hinges, handles pegstays bolting device locking arrangement spring catch etcetra and providing and fixing of 4mm (four millimetre) thick glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.Fixed steel windows.

Providing and fixing steel glazed doors, windows, and ventilators of standard rolled steel sections, joints mitred and welded with (Manufactured to relevant I.S. standard specifications) 16x3.15mm (Sixteen into three point one five millimetre)lugs 10cm (ten centimetre) long embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimetre)size of 1:3:6 (One cement :three sand :six graded/crushed crushed stone aggregate twenty millimetre nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of projecting hinges, handles pegstays bolting device locking arrangement spring catch etcetra and providing and fixing of 4mm (four millimetre) thick glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.Side hung window.

Providing and fixing steel glazed doors, windows, and ventilators of standard rolled steel sections, joints mitred and welded with (Manufactured to relevant I.S. standard specifications) 16x3.15mm (Sixteen into three point one five millimetre)lugs 10cm (ten centimetre) long embedded in cement concrete blocks 15x10x10cm (fifteen into ten into ten centimetre)size of 1:3:6 (One cement :three sand :six graded/crushed crushed stone aggregate twenty millimetre nominal size) or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of projecting hinges, handles pegstays bolting device locking arrangement spring catch etcetra and providing and fixing of 4mm (four millimetre) thick glass panes with glazing clips and special metal sash putty of approved make complete including applying a priming coat of red lead paint and carriage of materials within all leads and lifts complete in all respect as per direction of Engineer in Charge.Top hung ventilator.

Providing and fixing steel wire guage shutter in Z- section using galvainsed MS wire gauge of IS gauge designation 85g (eighty five gauge) with wire of diametre 0.56mm (zero point five six millimetre) for doors, windows and clearestory windows including metal beading of approved quality and shape section with necessary steel screws inluding applying a priming coat of red lead paint complete as per approved specification/design including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing steel glazed framed shutter of Z-section with 4mm (four millimetre) thick glass panes with putty for doors, windows and clearestory windows required shape and section with fitting and necessary screws etcetera including fixing iron hinges with necessary screws inluding applying a priming coat of red lead paint complete as per approved specification/design including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster 5 (five) microns over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns primer coating icluding fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre with prepainted GI limpet and bitumen washers complete with all accesoriees as required as per the direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Prividing and fixing flushing 38cm (thirty eight centimetre) overall with 0.60mm (zero point six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) mircorns primer coating plus back coat of polyster of 5 (five) microsn over 5 (five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm (six millimetre) diametre & prepainted GI limpet & bitumen washers complete with all accessories as required as per direction of Engineer-In-Charge including carriage of material within all leads and lifts complete in all respect.

Providing and fixing MS BP sheet 1.66mm to 2mm (one point six six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-In-Charge (Base members of steel work shall be measured & paid separately) including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing 150mm (one hundred fifty millimetre) diametre pipes on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5kg/sqm (four point five kilogram per square metre) including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing PVC plain bend 150mm (one hundred fifty millimetre) diametre on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing PVC shoe 150mm (one hundred fifty millimetre) diametre diametre on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing 150mm (one hundred fifty millimetre) diametre pipes MS holder bat clamps of approved design to PVC rain water pipe embeded including cement concrete blocks 10x10x20cm (ten into ten into twenty centimetre) of 1:2:4 (one cement : two sand : four graded/crushed/crushed stone aggregate 20mm (twenty millimetre) nominal size) and cost of cutting holes and making good the wall etcetra including carriage of material within all leads lifts and other incidental charges complete in all respect.

Providing and fixing 12mm (twelve millimetre) thick prelaminated board both side bwp phenol bounded exterior/interior grade panelled shutters with 40mm (forty millimetre) thick frame styles and rails of first class deodar wood for doors including bright finished/black enameled iron butt hings with necessary screws as per architectural drawing and approved specification including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 2nd class deodar wood in plain square edged cover fillets (beading) 40 mm x 12 mm (Forty milimetre into twelve milimetre) section with wood screws in ceiling and lining including mitring at junction including with in all leads, lifts, carriage of material and other incidental charges complete in all respect.

Providing second class deodar wood work in frames of doors, windows, clere story windows and other frames wrought framed and fixed in position including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 19mm (nineteen millimetre) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails and screw etcetra complete in all respect within all leads, lifts, carriage of material and other incidental charges.

Providing and fixing 19mm (nineteen millimetre) thick commercial board water proof shutters for cup-boards and box including shelves, back side of the box shall be of 6mm (six millimetre) thck ply and all cut portion of the shelves shall be finished with 6mm (six millimetre) hard wood edging etcetra including fixing with nickle plated piano hinges with screws etcetra including carriage of material within all leads lifts and other incidental charges complete in all respect.

Providing and fixing 6mm (six millimetre) thick ply wood lining with but jointing and nails (frame work and cover fillets to be measured and paid for separately including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 4 mm thick water prrof kit ply of standrad quality ISI mark and approved shade and colour in wall linning including mitring and junctions, butt jointing and nails complete (frame work for base to be measured and paid for seperately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 300x16mm (Three hundred into sixteen millimeter) anodized heavy duty aluminum sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 250x16mm (Two hundred fifty into sixteen millimeter) anodized heavy duty aluminum sliding door bolt anodized transparent or died to required colour and shade with bolts and nuts screws etcetra as approved by the Engineer-In-Charge complete including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 150x10mm (One hundred fifty into ten millimeter) heavy duty aluminum tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 125mm (One hundred twenty five millimetre) mat finish aluminum heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (One hundred millimetre) mat finish aluminum heavy duty handles anodized transparent or dyed to required shade and colour with necessary screws etcetra as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100x10mm (One hundred into ten millimeter)M.S. bright finished nickle plated tower bolts (Barrel type) anodized transparent or dyed to required shade and colour with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) oxidized M.S. handles with the necessary screws etcetra approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) oxidized MS hooks and eyes approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100x10mm (One hundred into ten millimeter) M.S. bright finished door closer with screws etcetra as approved by the Engineer-In-Charge complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100x10mm (One hundred into ten millimeter) bright finished brass tower bolts (barrel type) with screws etcetra complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 100mm (one hundred millimetre) bright finished brass handles with necessary screws etcetra complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 150mm (one hundred fifty millimetre) bright finished brass hasp and stapples (safety type) with necessary screw etcetera complete as approved by the Engineer-In-Charge including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 65x35mm (sixty five into thirty five millimetre) special quality bright finished brass cup board locks or wardrobe locks with six levers including necessary screws etcetra complete (Indian make of approved quality) in all respect within all leads, lifts, carriage of material and other incidental charges.

Providing and fixing 100mm (one hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete in all respect including carriage of materials within all leads, lifts and other incidental charges.

Providing and fixing first class deodar wood 12mm (twelve millimetre) thick and 100mm (one hundred millimetre) wide pelmet with 25mm (twenty five millimetre) diametre wooden curtain rod and brackets including fixing with 25x3mm (twenty five into three millimetre) M.S flats 10Cm (ten centimetre) long and plugs etcetra complete including carriage of material within all leads lifts and other incidental charges complete in all respect.

Applying priming coat on new concrete/masnory/Asbestos/ cement plaster surface after and including preparing the surface by thorughly cleaning oil, grease,dirt and other foreign matter and sand perparing as required with ready mixed primer including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Applying Birla White wall care putty over plaster surface after throughly brushing the suface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the suface including carriage of materials within all leads and lifts complete in all respect.

Distempering (Two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after throughly brushing the surface free from mortar droopings and other foreign matter and also including preparing the surface even and sand papered smooth on walls including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Painting one coat (excluding priming coat) on new concrete/masnory/plaster surfaced with ready mixed paint other than white brushing for use on all floors to give an even shade including cleaning the surface of all dirt, dist and other foreign matter and sand papering smooth as required including carriage of material with in all leads, lifts and other incidentals complete in all respect.

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt and other foreign matter etcetera including sand paper smooth complete including carriage of materials within all leads and lifts complete in all respect.

Wall painting (two coats) with acrylic emulstion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free form mortar dropings and other foreign matter sand papered smooth including applying of putty a required for making the surface including carriage of materials within all leads and lifts complete in all respect.

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter, sand papering and knotting with ready mixed paint brushing wood primer pink complete including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new wood and wood based surfaces, with enamel paint other than white to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, sand papering and stopping including carriage of materials within all leads and lifts complete in all respect.

Applying priming coat over new steel and other metal surface after and including preparing the suface by thourly cleaning the oil, grease, dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete with ready mixed priming paint brushing red lead, redoxide/zinc oxide chrome including carriage of materials within all leads and lifts complete in all respect.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint other than white brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including carriage of materials within all leads and lifts complete in all respect.

Providing under layer for plinth protection of 75mm (seventy five millimeter) thick (unconsolidated) bed of dry brick/stone aggregate 40mm (forty millimeter) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground including carriage of materials within all leads and lifts complete in all respect.

Providing plinth protection 50mm (fifty millimeter) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed crushed stone aggregate 20mm (twenty millimeter) nominal size including finishing the top surface of concrete smooth including curing complete and carriage of materials within all leads and lifts complete in all respect.

Constructing course rubble hammer dressed U-Shape open surface drain with side wall 15x22cm (fifteen into twenty two centimetre) in cement mortar 1:6 (one cement : six sand) and inside plastering with cement mortar 1:3 (one cement : three sand) including earth work and laying 10cm (ten centimetre) cement concrete in 1:5:10 (one cement : five sand : ten graded/crushed crushed stone aggregate of 40mm (forty millimetre) nominal size) and 7.5cm (seven point five centimetre) cement concrete 1:2:4 (one cement : two sand : four graded/crushed crushed stone aggregate of twenty millimetre nominal size) and finished with a floating coat of neat cement complete as per standard design including curing and carriage of material with in all leads, lifts complete in all respect as per direction of Engineer in Charge

Providing and fixing 15mm (fifteen millimeter) nominal bore to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 20mm (twenty millimeter) nominal bore to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 25mm (twenty five millimeter) nominal bore to wall, ceiling and floor galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the walls, ceiling and floor complete in all respect including carriage of materials within all leads and lifts complete in all respect.

Providing and laying 32mm (thirty two millimetre) nominal bore in trenches galvanized mild steel tube (medium grade) tube fitting (earth work in trenches to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts.

Providing and laying 40mm (forty millimetre) nominal bore in trenches galvanized mild steel tube (medium grade) tube fitting (earth work in trenches to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts.

Making connection of galvanized steel distribution branch with galvanized mild steel main 20mm to 40mm (twenty millimetre to forty millimeter) nominal bore by providing and fixing tee including cutting and threading the pipes complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing PVC 1000 ltr. (one thousand litre) water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all height above ground level including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing110mm (one hundred ten millimeter) nominal size high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etcetra complete including carriage of materials within all leads and lifts.

Providing and fixing150mm (one hundred fifty millimeter) nominal size high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etcetra complete including carriage of materials within all leads and lifts.

Providing and fixing 110mm (one hundred ten millimeter) nominal size PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 150mm (one hundred fifty millimeter) nominal size PVC single equal branch with oval access door, ISI marked insertion rubber washer 3mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 150 mm dia (one hundred fifty millimetre diametre) PVC door bend with oval access door, ISI marked insertion rubber washer 3 mm (three millimetre) thick bolts and nuts complete including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC single equal branch plain ISI marked including fixing with approved adhesive complete in all respect including carriage of material with in all leads, lifts and other incidentals.

providing and fixing 150 mm dia (one hundred fifty millimetre diametre) PVC single equal branch plain ISI marked including fixing with approved adhesive complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110 mm dia (one hundred ten millimetre diametre) PVC collars ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 150 mm dia (one hundred fifty millimetre diametre) PVC collars ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing PVC Plain bend 110mm (one hundred ten millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing PVC Plain bend 150mm (one hundred fifty millimetre) diametres ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hundred ten millimetre) PVC offset 450 ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) PVC offset 450 ISI marked including fixing with approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hundred ten millimetre) PVC plain double equal branch ISI marked of approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) PVC plain double equal branch ISI marked of approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm (one hundred ten millimetre) PVC clamps ISI marked of approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) PVC clamps ISI marked of approved adhesive etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 110mm x 90 mm (one hundred into ninety millimetre) diametre PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etcetra complete in all respect including carriage of material with in all leads, lifts and other incidentals.

Providing and fixing 150mm (one hundred fifty millimetre) PVC “P” or “S” trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 610 x 460 x 200 mm ( six hundred ten into four hundred sixty ten into two hundred millimetre) stainless steel kitchen sink of approved standrad ISI make with drain board and CP waste with C.I. or M.S. brackets, painted white including cutting hole and making good the same but excluding fitting including carriage of material within all leads and lifts complete in all respect.

Providing and fixing Orrisa pattern vitreous China wash down water closet squatting pan (Indian type W.C.pan)size 580mm (five hundred eighty millimetre) (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing anglo Indian (Universal closet) veterious China wash down water closet (European type W.C. pan) with integral “P” or “S” trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement :one sand) (seat and cover to be measured and paid for separately) complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 10 (ten) litres net capacity PTMT Coloured /White automatic flushing cistern with a pair of P.V.C/ C.I. or M.S. brackets complete with fittings including PVC syphonic apparatus, mosquito proof lid , PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing G.I. inlet connection for flush pipe with W.C. pan including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing plastic seat (sold/hollow type) and cover for wash down water closet with CP brass hinges and rubber buffers hollow type black or white plastic seat and cover including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing viteous china bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp (wast pipe to be measured and paid separately) flat back type of size 430mmx260mmx350mm (four hundred thirty into two hundred sixty into three hundred fifty millimeter ) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing vitreous china division plate for urinal 600x300mm (six hundred into three hundred millimetre) complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 5 (five) litres net capacity PTMT Coloured /White automatic low level flushing cistern with a pair of P.V.C/ C.I. or M.S. brackets complete with fittings including PVC syphonic apparatus, mosquito proof lid , PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing32mm ( thirty two millimetre) nominal bore PTMT urinal waste coupling of approved qualitty and colour complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimeter) nominal bore CP brass flush pipe/speraders for urinal with fitting such as union ,clamps etcetera(all in CP brass) including cutting holes and making good the same including carriage of materials within all leads and lifts.

Providing and fixing circular 460mm (four hundred sixty millimetre) daimetre (counter top) vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing flat back 550x400mm (five hundred fifty into four hundred millimeter) vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre flexible waste pipe for wash basin or sink including brass check nut complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing rubber plug for wash basin or sink 32mm dia (thirty two millimeter)complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre CP brass waste heavy duty for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 32mm (thirty two millimetre) diametre MI union for wash basin or sink complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 100mm dia (one hundred millimetre)diametre CP grating for gully Nahani traps complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600x450mm (six hundred into four hundred fifty millimetre) bavelled edge mirror of superior glass mounted on 6mm (six millimetre) thick AC sheet or ply wood sheet and fixed to wooden plugs with CP brass screws and washers complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 600 x 20mm (six hundred into twenty millimetre) CP brass towel rail complete with CP Brass brackets fixed to wooden plugs with CP brass including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 600x120mm (six hundred into one hundred twenty millimetre) glass self with CP brass brackets and guard rail complete fixed to wooden plugs with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing CP brass toilet paper holder complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing chromium plated brass soap dish with CP brass brackets fixed to wooden cleats with CP brass screws complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube complete in all respect including carriage of material with in all leads lifts and other incidentials.

Providing and fixing PVC connection pipe with brass unions 45cm (forty five centimeter) long 15mm (fifteen millimeter) nominal bore complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 40mm (forty milimeter) dia steel pipe grab bars at 78cm ( seventy eight centimeter ) height with M.S. plate as th eposition of seat and wash basin in toilet for disabled positions complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimetre) diametre C.P.brass bib tap heavy duty with capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing CP brass angle valve 15mm (fifteen millimetre) without nut and pipes complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimetre) diameter CP stop cock including carriage of materials within all leads, lifts and other incidental charges complete in all respect.

Providing and fixing 15mm (fifteen millimetre) diametre C.P. brass pillars tap heavy duty capstan head including carriage of materials within all leads and lifts complete in all respect.

Providing and fixing 15mm (fifteen millimeter) nominal bore brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 20mm (twenty millimeter) nominal bore brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 25mm (twenty five millimeter) nominal bore brass full way valve with wheel complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 15mm (fifteen millimetre) nominal bore brass ball valve (horizontal plunger type) high pressure with copper floats complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 20mm (twenty millimetre) nominal bore brass ball valve (horizontal plunger type) high pressure with copper floats complete in all respect including carriage of materials within all leads and lifts.

Providing and fixing 25mm (twenty five millimetre) nominal bore brass ball valve (horizontal plunger type) high pressure with copper floats complete in all respect including carriage of materials within all leads and lifts.

Constructing man hole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) in side plastering 15mm (fifteen millimetre ) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800x800mm (eight hundred into eight hundred millimetre) and 500mm(five hundred millimetre) deep including CI cover with frame (light duty single seal pattern-I) 455x610mm (four hundred fifty five into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38Kg. (Thirty eight kilogrmme) (weight of cover 23Kg. (twenty three kilogramme) and weight of frame 15Kg. (fifteen Kilogramme)) with 300mm (Three hundred millimetre) thick wall of square rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) as per HP.PWD. specification and as directed by the Engineer-In-Charge complete in all respect including curing and carriage of materials within all leads and lifts.

Constructing man hole with RCC top slab in 1:2:4 mix (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded crushed stone aggregate 40mm (forty millimetre) nominal size) in side plastering 15mm (fifteen millimetre ) thick with cement mortar 1:3 (one cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two sand : four graded crushed stone aggregate 20mm (twenty millimetre) nominal size) finished smooth complete including curing and testing inside size 800x800mm (eight hundred into eight hundred millimetre) and 500mm(five hundred millimetre) deep including CI cover with frame (light duty single seal pattern-I) 450x610mm (four hundred fifty into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38Kg. (Thirty eight kilogrmme) (weight of cover 23Kg. (twenty three kilogramme) and weight of frame 15Kg. (fifteen Kilogramme)) with 300mm (Three hundred millimetre) thick wall of square rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement : three sand) as per HP.PWD. specification and as directed by the Engineer-In-Charge complete in all respect including curing and carriage of materials within all leads and lifts.

Providing and laying 110 mm ( one hundred ten millimetre) dia cement concrete 1:5:10 ( one cement :five sand:ten graded stone aggregate 40mm ( forty millimetres) nominal size bedding for stoneware pipes of the following internal diametres, necessary from work and curing complete in all respect including curing and carriage of materials within all leads and lifts.

Providing and laying 150 mm ( one hundred fifty millimetre) dia cement concrete 1:5:10 ( one cement :five sand:ten graded stone aggregate 40mm ( forty millimetres) nominal size bedding for stoneware pipes of the following internal diametres, necessary from work and curing complete in all respect including curing and carriage of materials within all leads and lifts.

Vivek Prasher

Navneet Singh Rathore

Gopal Singh Thakur