Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.6 CrAccepted-AOC 472 D BLOCK MODEL TOWN EXTENSION LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L1 | Accepted-AOC Documents found are correct | |
| 2 | L2₹21.6 Cr+₹96.5 L (4.68%)Rejected-AOC REGD OFFICE 1ST FLOOR SCF 14 I BLOCK MARKET SARABHA NAGAR LUDHIANA | LUDHIANA | LUDHIANA | PUNJAB | L2 | Rejected-AOC Documents found are correct | |
| 3 | L3₹21.8 Cr+₹1.2 Cr (6.01%)Rejected-AOC BOOTH NO 53 MAIN MARKET KITCHLU NAGAR LUDHIANA 141001 | LUDHIANA | LUDHIANA | PUNJAB | 141001 | L3 | Rejected-AOC Documents found are correct | |
| 4 | L4₹22.5 Cr+₹1.9 Cr (9.04%)Rejected-AOC NEAR OLD GRAIN MARKET KAPURTHALA | KAPURTHALA | KAPURTHALA | PUNJAB | L4 | Rejected-AOC Documents found are correct | |
| 5 | L5₹22.8 Cr+₹2.2 Cr (10.8%)Rejected-AOC SCO 2 DASHMESH ENCLAVE PATIALA ROAD ZIRAKPUR | L5 | Rejected-AOC Documents found are correct |
Tender Value
₹25.6 Cr
EMD Value
₹51.2 L
Closing Date
17 May 2023, 12:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer Provincial Division PWD B and R Branch Ludhiana
Upgradation of Plan Road Khanna Samrala Machhiwara Rahon Road (MDR 53) RD 16.78 33.605 (16.825 Km) under Head NABARD 28 Scheme including Maintenance of Road for 5 Year (One year Defects Liability Period Plus Four Year Maintenance Period)
2023_CEPW_101719_1
Bid No. 01 dated 20.04.2023
Open Tender
Civil Works - Roads
Percentage
270 days
Khanna Samrala Machhiwara Rahon Road
Please refer Tender documents.
23 documents required · 23 mandatory
₹50,000
₹51.2 L
Yes
Executive Engineer Provincial Division Ludhiana
5 Jun 2023
3 May 2023
17 May 2023
3 May 2023
17 May 2023
3 May 2023
10 May 2023
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications | 3,487.5 | Per Cum | 292 | ₹10,18,350 |
| 2 | Dismantling of existing damaged Bitumen surface by Cold Milling Machine upto 30 mm depth | 90,000 | Per Sqm | 32.32 | ₹29,08,800 |
| 3 | Compaction of earth work & Preparation of sub grade including loosening, leveling of earth 225mm thick top layer, rough dressing of soil, final dressing of earth to give level, camber, watering, rolling with road roller, compacting the bed to achieve minimum dry density as given in the Table 300-2 as per Technical clause 305 of MORT&H specifications. | 16,430 | Per Sqm | 6 | ₹98,580 |
| 4 | Relaying of recovered material obtained from dismantling of road crust as construction of granular sub-base by providing coarse graded matereal grading-II spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achive the desired density, complete as per technical clause 401 of MORT&H specifications. | 2,092.5 | Per Cum | 139 | ₹2,90,857.5 |
| 5 | Construction of granular sub-base by providing material as per grading-III ( Table 400-I of MORT&H 5th revision), mixing in a mechanical mix plant at OMC, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per technical clause 401 of MORT&H specifications | 1,193.5 | Per Cum | 1,791.55 | ₹21,38,214.93 |
| 6 | Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density complete as per technical clause 406 of MORT&H specifications | 4,789.5 | Per Cum | 2,207.13 | ₹1,05,71,049.14 |
| 7 | Providing and applying primer coat with bitumen emulsion SS on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85kg/sqm complete as per technical clause 502 of MORT&H specifications | 15,500 | Per Sqm | 32.83 | ₹5,08,865 |
| 8 | Providing and applying tack coat with bitumen emulsion RS using emulsion pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface/granular surface treated with prime coat after cleaning the surface complete as per technical clause 503 of MORT&H specifications | 3,44,221.8 | Per Sqm | 10.86 | ₹37,38,248.75 |
| 9 | Providing and laying patch work with bituminous macadam 50mm to 75mm thick using crushed stone aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% in Continuous type hot mix plant, carriage of mixed material to site of work, laid after trimming the pot hole, removal of failed material, laying by suitable means and rolling with a smooth wheeled roller to match the adjoining surface complete as per technical clause 504 of MORT&H specifications
NOTES : -
I. The actual volume of the aggregate to be paid for shall be computed after deducting the specified percentage from the volume computed by stacks measurement as per MORT & H specifications (addendum to latest revision) for the purpose of secured advance."
II. The final grading for the aggregates required for bitumenious macadam course Grading 2 for 75 mm / 50 mm thickness of each layer conforming to table 500-7 of M.O.R.T. & H specifications (addendum to latest rivision) shall be determined after getting the bitumenious macadam grading-2 designed from Punjab PWD, B&R Research Laboratory Patiala after obtaining 60 % of material. The design mix so finally approved by shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set fourth in table 500-6 (addendum to latest revision).
III. The mix shall exhibit the following details:
a) Binder expressed as a percentage by weight of total mix.
b) Coarse aggregate of 26.5 mm gauge expressed as percentage by weight of total mix.
c) Crushed Bajri of 11.2 mm size expressed as percentage by weight of total mix.
d) Fine aggregates 4.75 mm below expressed as percentage by weight of total mix.
e) A single definite percentage passing each sieve for mixed aggregates.
f) Density of Bitumensious macadam (75 mm/ 50mm thick after compaction) shall be minimum 2.2 gms/C.C & nothing extra shall be payable if higher density is achieved at site.
IV) The Contractor thereafter, shall be required to complete the supply of various ingradients or Bituminous macadam as per proportions stipulated in the approved mix.
V) Rate of B.M shall be quoted by the contractor with respect to binder content percentage by weight of mix being 3.4 % if Laboratory designs a mix with different percentage then the difference shall be payable / recoverable. | 703.94 | Per Cum | 8,288.79 | ₹58,34,810.83 |
| 10 | Providing and laying dense graded bituminous macadam 60mm thick with batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG-40 @ 4.5%, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction complete as per technical clause 505 of MORT&H specifications
NOTES:-
(i) Job mix formula for the dense bituminous macadam shall be provided by the agency and shall be got approved from Punjab PWD, B&R Research Laboratory Patiala before adoption at site for execution.
(ii) The specification of this item for analytic purpose is kept with bitumen content @ 4.50% weight of mix variation as compared with job mix formula shall be paid/ deducted accordingly. The limits of variation shall be worked out with the approved formula.
TECHNICAL NOTE:-
I.) Apart from the conformity with the grading and quantity requirement of individual ingredients exhibited above the mix aggregate i.e. coarse and fine aggregate for dense bituminous concrete shall meet all requirements set forth clause 505 of MORT&H specifications.
II.) The final grading for the aggregates required for dense bituminous macadam confirming to table 500.10 of MORT&H specifications shall be determined after getting the dense bituminous macadam designed from Punjab PWD, B&R Research Laboratory Patiala after obtaining 60% of material. The design mix so finally approved shall be termed as the approved mix. The aggregates shall be hydrophobic and of low porosity. The aggregates shall satisfy the physical requirement set forth in table 500-6 (addendum to latest revision).
III.) The approved mix shall exhibit the following details source and location of all material:-
(a) Binder expressed as percentage by weight of total mix.
(b) Course expressed as percentage by weight of total mix.
(c) Crushed bajri expressed as percentage by weight of total mix.
(d) Fine aggregate expressed as percentage by weight of total mix.
(e) A single definite percentage passing each sieve for mixed aggregates.
(f) Density of dense bituminous macadam after compaction will be not less than 2.30 gm/CC | 9,238.29 | Per Cum | 10,875.99 | ₹10,04,75,549.66 |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
BOQ_210477.xls
BOQ Document • 0.35 MB
120150525.pdf
Tender Document • 23.54 MB
120150526.pdf
Tender Document • 6.78 MB
120150528.html
Tender Document • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .