02 - Supply and Fixing of 101 Fit Flag Mast in Nagar Palika Dhariyawad.

fooj.k

Supply Erection Testing and Commissioning of 30.5 mtr. Flag mast system in Three Sections with arrangement for mounting flag along with head frame hot dip galvanized and suitable for wing velocity as per is 1875. Including shallow foundation with m20 grade concrete suitable for flag mast considering the safe soil bearing capacity at site as 10t/sqmtr at 2mtr depth with all materials and labor foundation bolt manufacture from special steel along with nuts washer anchor plate and templates with system for raising lowering of flag. It shell have double drum with Gmm dia galvanized wire rope. And integral power tool for the raising and lowering of flag. Suitable Control panel shall be provided for reversing operation power tool motor. The shaft shall be PU painted with coating of each primer, and PU paint. The complete work shall be supervised and certified by manufacture. Approved make surya,Aster,Utkarsh.

Supply Installation testing and commissioning of national flag mast size 20x30 ft made with shiny knitted polyester 160 GSM ©

P&F TP&N 415 side handle operated double break fuse switch unit in steel enclosure conforming to IS:139447 P-III and IS:4064 (W/o HBC fuses)Including making connections with suitable lugs, testing etc. as required 100Amp code 50.3

Providing & Laying XLPE Insulated I P.V.C sheathed cable of 1.1 KV grade with aluminum conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 Including excavation of 30cmX75cm size trench,25 em thick under layer of sand second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc.as required of size. 16 Sqmm 4 Core

Plate Earthing as per IS:3043 with copper Earth plate of size 600mm x 600mm x 3.0mm by embodying 3 to 4 mtr. Below the ground level with 20mm dia. G.I. ‘B’ class watering pipe including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and C.C, finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of Size 300mm x 300mm Complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required. code 54.3

S& laying following size earth wire/strip in horizontal or Vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required 8 swg copper wire code 54.4

S& laying following size ‘A’ class G.I. Pipe with accessories for laying earth conductor/strip in ground/surface/recess as required 20mm dia code 54.5

P & F of IP 55 protected light-controlled switch based on infrared sensing and daylight with built in over load protection, timer to switch OFF at Preselected time. Switch shall have 7-day power backup without hampering of preset time and over ride facility for maintenance purpose code 58.15 Suitable for 15 kw load (three phase) including contactor, MCB, cable glands, terminal block and locking arrangement

Supply and erection of octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15/M-20 grade (1:1,5:3) with the help of anchor bolts of grade 6.8(IS 1367 P lll). The Pole shall be made of S-355JO grade steel sheet, folded lengthwise to obtained octagonal shape, having single longitudinal seam weld and hot dipped galvanized internally & externally in accordance with IS 2629. The Pole shall have a weatherproof flush door and locking arrangements. The Complete Work Shall be supervised and certified by the for satisfactory supply erection, testing and Commission Code 58.18 7mtr