In Ward-22, road construction work using hot mix asphalt will be carried out on Sleeper Road from Rampur Road to ESI Hospital, and side paving work will be done from Rampur Road to Raju Mobile Repair Shop.

Dismantling manually/ by mechanical Bituminous road means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Disposal of surplus malwa upto 5 km

Providing,laying,spreading and compacting graded stone aggregate to wet mix macadom specification including premixing the mterials with water at O.M.C.in mechanical mix plant carriage of mixed material by tipper to site. Laying in uniform layer with paver in sub base/base course on well prepared surface and compacting with vibratory roller to achive the desired density. incluing lighting, guarding, barricating and maintance of diversion etc.

Providing and applying Primer coat on prepared surface witht Bitumen Emulsion @0.70 kg per Sqm.

Providing and applying tack coat on bituminious surface. @ 0.250 Kg/Sqm. bitumen of grade VG-10, Including heating the bitumen,spraying the bitumen with mechanical operated spray unit fitted on bitumen boiler, cleaning and preparing the the existing road surfce as per specifications

Providing and laying 50 to 100mm average compected thickness bituminous macadam using crushed stone aggregates of specified grading premixed with binder bitumen of grade VG-30 @ 3.50%(percentage by weight of total mix ) prepared in batch hot mix plant of 100-120 TPH capacity. transported to site by tippers laid over a previously surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled ,vibratory and tandem roller as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-charge.

Providing and laying 25mm average compected thickness semi - dense Bitminious concrete using crushed stone aggregates of specified grading premixed with binder bitumen of grade VG-30 @ 5.00%(percentage by weight of total mix ) and lime filler @ 2% by weight of aggregate prepared in batch hot mix plant of 100-120 TPH capacity. transported to site by tippers laid over a previously surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled ,vibratory and tandem roller as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-charge.

P/L of Hot applied Thermoplastic compound 2.5 mm thick including reflectiorising glass @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRCD : 35 the finished surface to be level, uniform and free from streaks and holes including post of all type of material, labour T&P etc. required for proper complition of the work as per MORTH specification (2001) No. 803 complete

Providing&fixing of pavement maker (cat eye ) type X- astmd - 4956-04 dellison / 3-M (usa make) consistiong of asa plastic hausing contain prismatic two glass coverd. Plastic reflective face two reflect incident light including all of tax etc.

Providing and layingConcrete with 4cm gauge brick ballast, fine sand of 1.25 fineness modulous and cement in prportion of 1:6:12 in foundation in under floor , including supply of all material labour and T&P etc rfequired of proper completetion of the work .