Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Ta. Dharampur, Kaprada and Nanapondha (Only those villages that were previously included in Kaprada Taluka) of Valsad District.

: Name Of Work :

Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance,

Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with

latest amendment and 32 mm NB ISI marked medium duty GI Pipe in for ONE Year Ta.

Dharampur, Kaprada and Nanapondha (Only those villages that were previously included

in Kaprada Taluka) of Valsad District.

Office of the Executive Engineer,

Public Health Mechanical Division,

Gujarat Water Supply & Sewerage Board, Valsad.

First Floor, Jal Bhavan,

In front Kusum Vidhyalay

Tithal Road, Bhagdawada, Valsad –

Volume III: Price bid Page

NAME OF WORK:Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in Ta. Dharampur, Kaprada and Nanapondha

(Only those villages that were previously included in Kaprada Taluka) of Valsad District.

Schedule showing the materialtobe supplied from the store of GWSSB for the

workcontracted to be executed at the rates at which they are to be charged.

Sr. Particulars Qty. RateRs. UnitDeliv Place of

No. ery Delivery

(1) The persons of firm submitting the Tender should see that rates in the above schedule are

filled up by the Executive Engineer, on the issue of formpriorto the submission of the

(2) Materials which are not included in Schedule 'A' but required for the work shall be brought

by the Contractor at his own cost.

(3) Carting of above materials should be done by contractor at his own cost.

(4) Contractor should return the balance materials, otherwise recovery at the double rates will

be affected in view of Clause 12.4.

(5) Contractor should return all the old dismantled materials other than concrete to dept. store

at his own cost, otherwise recovery will be made for non-return of old dismantled materials

atthe rate of current SORfrom contractor bill.

Signature of Contractor. Executive Engineer,

P.H.Mech. Division.

Volume III: Price bid Page

NAME OF WORK:- Repairing of India Mark-II Hand Pump installed at various villages with providing

of manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in Ta. Dharampur, Kaprada and Nanapondha (Only

those villages that were previously included in Kaprada Taluka) of Valsad District for One Year.

Particulars Qty. Rate Unit Amount Rs.

Providing light commercial (medium) four wheeler Diesel vehicle

on rental basis for one day (particularly for H.P repairing works)

1 with Driver & POL(Per day) (The vehicle shall be fully insured with 18 100490 Team

fitness certificate & PUC) with 01 Semi skilled Labour (Per day) &

03 Unskilled Labour (Per day) for year.

2 Handpump Spares

(A) SPARES FOR PUMP HEAD

Hexa. Bolts M-12x1.75x40mm long with Hexa.Nut M-

12x1.75 & Washer 4mm thick

Hex. Bolt M10x1.50x40 mm long

Nylock Nut M10x1.50

Handle Axle(Stainless Steel)

Washer (4 mm thick) for Handle Axle

Bearing (No.6204-Z)

Spacer(for pump Head)

Chain with Coupling

Bolt for front cover M-12x20 mm long

A- Pump Head Assly.Consi.of Item No.(1) to (7) as per Fig.3.1

(B) SPARES FOR CYLINDER

Upper Valve Assly comp. consi.of item as per fig 3.6 A (Part

Lower Valve Asslycomp.consi.of item as per fig 3.6 B (Part

Volume III: Price bid Page

WATER TANK consi.of item as per fig 3.6 B (1 to 6)

Cylinder With Brass Liner consi.of item (a) & (b)

Spares for Conne. Rods

Hexagonal Coupler M-12 x 1.75 x 50mm

UPPER VALVE ASSEMBLY SPARES

Upper Valve Seating

Plunger Yoke Body

Plunger Rod (S & S)

Upper Valve (Guide)

(H) LOWER VALVE ASSEMBLY SPARES

Check Valve Seat

Check Valve Seating

Rubber Seat Retainer

Handle Bar consisting of Item no (1) & (3) as per Fig 4.6

Cylinder Assly Comp.consisting of Item no (1) to (7) as per

Conn. Rod Electro Galva.consisting of Item no (1) to (3) as

Special Tool Kit for I. M.-II HandpumpConsi. Item (1) to (11)

(L) as per IS 15500 Part-8 with tool box 0 6249.60 Set

Standerd Tool Kit for I. M.-II HandpumpConsi. Item(1) to

(M) (16) as per IS 15500Part-8 with tool box 0 6340.32 Set

(N) Third plate consisting of Item (1) & (2) as per fig 4.5 0 129.03 Set

(O) Spares for deep well Hand pump-Extra Deep

Cylinder Body with Brass Liner consisting of Item no (1) for

O-1 body fig 5.2 & (2) for brass linear Fig 6.1 B 0 525.60 Set

O-2 Handle Bar consisting of Item no (1) to (3) as per Fig 4.7 0 1187.20 Set

Upper Valve Assembly complete consisting of Item no (1)

to (11) as per Fig

Volume III: Price bid Page

O-4 Follower as per Fig 6.7 0 161.25 No

O-5 Bucket Spacer-Lower as per Fig 6.5 0 75.21 No

(P) Padestal of Telescopic stand 0 1613.76 Nos

Manufacture Supply & Delivery of ISI Marked 32 mm dia medium

quality galvanized mild steel tubes (Continuously welded electric

resistance welded (ERW)/high frequency induction weled (HFIW)

/Hot finished welded (HFW) type screwed at both ends to IS:554/

3 1985 for pipe suitable for water and gas application, socket on 3330 211.86 Mtr.

one end and other end protected with plastic thread protector in

approximate length of 3 mtrs conforming to IS:1239 (Part-I)

With latest amendment and socket to conforming to IS:1239

(Part-II) 1992 With latest amendment

Total Cost for one year (Rs.)

1. Contractor has to keep Repairing Teams as per the Para no. 9 of the Information of Tender of the Volume I (GCC).

2. Contractor has to keep number of manpower for each repairing team as per the condition no. 1 of the Special

Condition of the Volume II (Technical Bid).

3. Payment will be made as per the deduction conditions mentioned in the Volume I (General Commercial Terms

I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words )

above / below the tendered estimated rates as mentioned above

Offer for Above Offer for Below

1. Estimate cost Rs: 29,91,978.61 1. Estimate cost Rs:

2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________

3.Net amount Rs:_______________ 3.Net amount Rs:_______________

in words( in words(

Executive Engineer,

Signature of Contractor P.H. Mech. Division.

Volume III: Price bid Page

NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with providing of

manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness

certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment

and 32 mm NB ISI marked medium duty GI Pipe in Ta. Dharampur, Kaprada and Nanapondha (Only

those villages that were previously included in Kaprada Taluka) of Valsad District for One Year.

Payment Schedule for Spare and GI Pipe

Payment should be made as per actual consumption of material at the end of the month

after steps followed as per clause

Payment Schedule for Vehicle with Team

Payment should be made as per actual team with vehicle deployed by contractor per

month as per requirement or as per instructed Engineer in charge at the end of the month

after steps followed as per clause

Note: Penalty of 5% of bill amount will be imposed if agency fails to submit bill with necessary

documents by 10th of every month.

Signature of Contractor

Executive Engineer,

P.H. Mech. Division.

Volume III: Price bid Page