Providing Water Supplying to MJPAPBCWR School at Srisailam Dam East in Nandyal District

Supplying and fixing 65 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 in ground or on wall with GI fittings such as elbows tees couplings, nipples, plugs including excavation for trenches and refilling the trenches ,chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work except for GI bends union and GI connectors with checkout and socket Tata or Zenith make or equivalent

Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS778 Iclass heavy duty 50 mm NB size

Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work.80mm Nominal bore

Manufacture, Supply and delivery of Air Cushion valves / Quick Released damped Air Valves (QRDA) as per AWWA, Ex-factory excluding transportation and all taxes.100mm dia 10 Kgs/cm2 (MAT-07983)

Plain Cement Concrete (1:2:4) using 20mm size graded machine crushed hard granite metal (coarse aggregate - as per IS 383 - 1970 and IS 2386 Part 1 to Part 8) from approved quarry using concrete Mixer 10 / 7 cft (0.2 / 0.8 cum) capacity including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site including all charges for machine mixing, hire charges of concrete mixer, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for finished item of work. (APSS No. 402)

Drilling of bore well by down the hole hammer drilling to a finished dia of 165mm in all formations suitable for down the hole hammer drilling such as medium rock formation to hard rock formation, all consolidated formation and drilling in over burden to a dia of not less than 200mm etc., and reaming the bore well to suit insertion of casing pipe with couplings, caps and any other relavant materials up to required depth as directed by the Department including transportation of drilling rig and supporting vehicles and including bore development (Flushing of bore well at an average pressure of 150 PSI), conducting yileld test, consumable charges, crew charges required in fixation of pipe assembly completely done to the satisfaction of the Department and including all labour charges, overheads and contractor profit but excluding cost of casing pipe, couplings, cap etc., The entire work shall be done as per IS - 2800 Part I & II 1979 and amended from time to time up to 90m depth

Drilling of bore well by down the hole hammer drilling to a finished dia of 165mm in all formations suitable for down the hole hammer drilling such as medium rock formation to hard rock formation, all consolidated formation and drilling in over burden to a dia of not less than 200mm etc., and reaming the bore well to suit insertion of casing pipe with couplings, caps and any other relavant materials up to required depth as directed by the Department including transportation of drilling rig and supporting vehicles and including bore development (Flushing of bore well at an average pressure of 150 PSI), conducting yileld test, consumable charges, crew charges required in fixation of pipe assembly completely done to the satisfaction of the Department and including all labour charges, overheads and contractor profit but excluding cost of casing pipe, couplings, cap etc., The entire work shall be done as per IS - 2800 Part I & II 1979 and amended from time to time 90m to 150m depth

Drilling of bore well by down the hole hammer drilling to a finished dia of 165mm in all formations suitable for down the hole hammer drilling such as medium rock formation to hard rock formation, all consolidated formation and drilling in over burden to a dia of not less than 200mm etc., and reaming the bore well to suit insertion of casing pipe with couplings, caps and any other relavant materials up to required depth as directed by the Department including transportation of drilling rig and supporting vehicles and including bore development (Flushing of bore well at an average pressure of 150 PSI), conducting yileld test, consumable charges, crew charges required in fixation of pipe assembly completely done to the satisfaction of the Department and including all labour charges, overheads and contractor profit but excluding cost of casing pipe, couplings, cap etc., The entire work shall be done as per IS - 2800 Part I & II 1979 and amended from time to time 150m to 250m depth

Supply and fixing of 180mm dia 6 kgs/sqm PVC casing pipe including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work

Supply and fixing of 180mm dia PVC bore cap including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work

Geological survey charges for finalisation of location of bore well including cost, transportation of all euipment, incidental charges, labour charges, overheads and contractor profit etc., complete for finished item of work.

Supply and Transportation of 7.50HP 4/5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with waterproof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10%, Three Phase 50 Hz AC supply etc complete for 6" Bore well. Makes: As per list of recommended brands as category I.ELEC-5.4.5 d MAT-03658

Supply of 3 Cor 6.00sqmm ISI marked Flat Copper cable of ISI for Submersible Motors conforming to IS 694:2010. Makes: As per list of recommended brands as category I ELEC-1.6.3 d MAT-02797

Fabrication ,transportation and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated , painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using LAURITZ KNUDSEN (FORMERLY L&T) / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc. complete for 3 phase motor pump sets. Makes: As per list of recommended brands.Up to 7.5 HP with DOL Starter of.ELEC-5.4.17 a MAT-03713