Misc Capital C E works SH Misc Minor capital works at NIPTB and associated areas of NSCBI Airport Kolkata

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar.

Dismantling steel work in single or built up sections in angles, tees, flats, channels, MS tubular section etc. including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars.

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1cement : 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size).

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing and laying half brick masonry with common burnt clay FPS (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level .Cement Mortar 1:3

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately).

Providing and fixing Flush anchor HKD M8x30 of Make- Hilti on R.C.C. surface backing including drilling necessary holes and making good the surface etc. The Flush anchor is fixed with one no. of Threaded rod of dia 10 mm of suitable length as per site requirement along with one no. of Carbon Steel - Electro galvanized post manufacture Universal clamp for hanging G.I. pipes of dia 50 to 32 mm with G.I. fittings all complete as per direction and satisfaction of E-I-C.(Note: The providing and fixing of G.I pipe along with its fittings is paid in seperate item.)

Providing and fixing Flush anchor HKD M12x50 of Make- Hilti on R.C.C. surface backing including drilling necessary holes and making good the surface etc. The Flush anchor is fixed with one no. of Threaded rod of dia 10 mm of suitable length as per site requirement along with one no. of Carbon Steel - Electro galvanized post manufacture Universal clamp for hanging C.I. pipes of dia 100 mm with C.I. fittings all complete as per direction and satisfaction of E-I-C.(Note: The providing and fixing of C.I pipe along with its fittings is paid in seperate item.)

Providing and fixing soil, waste and vent pipes : 100 mm dia. Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989.

Providing and fixing plain bend of required degree: Sand cast iron S&S as per IS : 3989.

Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100x100x100 mm. Sand cast iron S&S as per IS - 3989

Providing and fixing single equal plain junction of required degree : 100x100x100 mm. Sand cast iron S&S as per IS - 3989

Providing and fixing terminal guard :Sand cast iron S&S as per IS - 3989

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :100 mm inlet and 100 mm outlet. Sand cast iron S&S as per IS: 3989.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 32 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 40 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 50 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 65 mm nominal dia Pipes Note: Pipes of schedule 80 to be provided. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes Note: Standard Dimensional Ratio of Pipes should be 11. Heavy solvent cement to be used for jointing of pipes as per standards.

Providing and fixing Unplasticised Chlorinated Polyvinyl Chloride (UPVC) pipes including all UPVC fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with apropiate solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work etc. 40 mm nominal outer dia .Pipes.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting,risers of steps and dados ,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Note: Shade of tiles - Kajaria Alexis Light, Eon Marfil or equivalent

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 1200 mm Note: Shade of tiles - Kajaria Glacier White Matt finished, Gres Tough, Messina or equivalent

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Providing and fixing the MS steel framework at all height made out of MS tubular Hollow sections, plates,etc. conforming to IS 1161/4923, Grade Yst 310 and Make-TATA including cutting, hoisting, welding, fixing the frame to floor and ceiling with fasteners, etc. and applying priming coat of epoxy primer all complete as per direction of Engineer-in-charge. (Providing and fixing of fasteners will be paid in seperate items. Cost of Scaffoldings is included in the item and Nothing Extra shall be paid.)

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately). 12 mm thick.

Providing and fixing Wash Room basin & vanity counters with 12 mm thick 100% bendable Acrylic solid surface of Dupont or Merino Hyundai Hanex or equivalent of approved make, shade, and design , with properties like bacteria resistance,antifungal, heavy duty scratch resistant & stain resistant, impact resistant, insulative & non conductive, Green Guard gold certified, fire rating as per standard EN 13501-1 for Euroclass reaction to fire, density at 23 degree celsius 1.81gm/cm3, thermal expansion 3.5x10^(-5)/degree celsius,etc over 12mm thick WPC board with underneath RCC slab of minimum 75mm thick or any other surface including all moulded wash basins,finishing of joints,silicon sealants etc to give joint less smooth surface. Acrylic solid surface sheets to be cut, pasted and finished in approved shade, as per approved design by the Engineer in charge. The vanity counters will be seamlessly integrated with Acrylic sold surfaces made washbasin in approved color with minimum size 600 mm (L)x 400mm(W) x 200 mm(D) and back splash of minimum 100mm to complete the profile.The spacing between two wash basin shall be minimum of 100 mm or specified other wise, should be placed symmetrically in the vanity counters.The finished counter height shall be 850 to 950 mm from finished floor level. The front storage facia will also be made with the solid surface with the opanable system with necessary hardware & accesorries.Skirtng height from floor will be 200mm & below the basin will be 200mm. This counter should be fixed over 12mm WPC supporting structure with all mechanical fixtures as per the specification, drawings and guideline as approved by the EIC. The quoted rates shall include material cost with wastages, fabrication & installation of counter at site, cost of silicon & approved adhesives, chamfering of edges, flushing of joints and final finishing as per directions of Engineer-/in-charge. The visible surface area will be taken into consideration for measurement.(WPC supporting structures will be paid seperately). Note: Shade of Acrylic solid surface - Cascade Ice or Cascade Cream or Equivalent.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work.

Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work : 100 mm diameter pipe

Painting with poly uretherin High gloss enamel paint one or more coats over existing surface after cleaning of old surface by mechanical means at all height all complete as per direction of EIC. (Cost of Scaffoldings is included in the item and Nothing Extra shall be paid.)

Painting with Polyurethane paint to give smooth & even surface paint of approved brand and manufacture to give an even shade on MS framework at all height: a) Two or more coats on new work. (Cost of Scaffoldings is included in the item and Nothing Extra shall be paid.)

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts &bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum plain board confirming to IS 2095 Part-I

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.a)1.5 mm thick

Providing and fixing toilet paper holder : C.P. brass

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing Pressmatic Pillar cock auto closing system (make Jaquar, model PRS-031) or equivalent all fitings and accessories complete as per direction of Engineer-in-charge.

Providing and fixing Pillar cock for PRM passengers washbasin (make Jaquar, model OPP-CHR-15001PM) or equivalent all fitings and accessories complete as per direction of Engineer-in-charge.

Providing and fixing CP Brass Bottle trap Jaquar cat. No.ALD-769L. (250x190) or equivalent etc. complete as per the direction of Engineer-in-charge.

Providing and fixing first quality white vitreous china Folio Half-Ped Lav wash basin of KOHLER made , model - K11341IN-1-0 or equivalent with M.S. or CI brackets, 32 mm CP brass waste of standard pattern and other ancillary fittings including painting of fittings and brackets, cutting and making good the walls wherever required.

Providing and fixing first quality white vitreous china wall hung P trap water closet (European type) with C.P. bolts, nuts, solid plastic seat cover with lid, hinges and rubber buffers, Chair Brackets, CP brass, screws and washers all complete including cutting and making good the walls and floors wherever required.Wall hung WC (Code 75708IN-SS-0 of Kohler with white seat cover or equivalent)

Providing and fixing Health Faucet (Hand Shower) Jaquar code ALD-563(New) or equivalent - with 1.2 m long flexible tube and wall hook as per direction of EIC.

Providing and fixing of Windows Paper Towel Dispenser of size 272x90x220 mm Make- Euronics, Model No. EP 23 or equivalent all complete as per direction and satisfaction of Engg.-In-Charge.

Providing and fixing of Double coat hook Jaquar cat. No. ACN-CHR-1161 N or equivalent etc complete, as per direction of Engineer-in-charge.

Providing and fixing of S. STEEL SOAP DISPENSER-(SATIN FINISH) Euronics Model No. ES 04 or equivalent (Vol-800ml) all complete per direction and satisfaction of Engg.-In-Charge.

Providing & fixing Metropole Flush Valve Regular 32 mm size Jaquar FLV-1095N or equivalent etc. complete as per the direction of Engineer-in-charge.

Providing and Fixing Waste Coupling 32mm Size half thread with 77 mm height Jaguar (ALD-CHR-727) or equivalent all complete as per the direction of Engineer-in-charge.

Providing and fixing Stainless steel grab bar 600mm long of Jaquar make Cat. No. AHS-1507 or equivalent with stainless steel screws complete .

Providing and fixing Height adjustable Lift up Toilet Support-240mm height adjustable-730mm of Make- Pressalit Denmark, Code-PRPR 37047 or equivalent with stainless steel screws all complete as per the direction of Engineer-in-charge.

Providing and fixing white vitreous china Urinal of Make-Kohler Code 16321IN-SS-0 or equivalent suitable for wall mounted sensor operated touchless automatic flushing system to ensure flushing only when in use, comprising of all plumbing, electronic and electrical items inlcuding infrared photo cell eyes, electronically operated solenoid valve, box, Urinal spreader concealed copper piping, bottle trap, waste coupling, Z brackets etc. and any other items as required to provide satisfactory functioning complete in all respects with 230 Volts AC Power Source, including painting of fittings and brackets, cutting and making good the walls and floors wherever required:

Providing and fixing Stainless steel grating of make -Chilly code-GC-RFC-127 or equivalent having overall size of 127 mm to the inlet mouth of waste water/clean out points of CI pipe lines of 100 mm dia for sanitary work as per direction and satisfaction of E-I-C.

Providing & fixing of Urinal modesty panels made of 12 mm thick composite laminate in approval colour of size 450mm x 900 mm with 4 nos. of SS right angle brackets and necessary SS screws of grade 304 all complete as per direction and satisfaction of Engg.-In-Charge.

Supplying and installing modular toilet cubicles of Make - Merino, Model Type - Titan SS series or Make- Greenlam, Model Type- Sturdo Classique-Invincible with Box Toprail or equivalent of size 1000 mm x 1550 mm x 2100 mm (W x D xH ), (Height is including 150 mm gap from bottom ) and a door of width 600 mm. all panels, pilasters, doors shall be made up of 12 mm thick solid compact laminate (Phenolic Core Board as per IS 2046 based on thermosetting resins, homogeneously reinforced with cellulose fibers making cubicles impervious to Water resistance to fire, etc. Compact laminate should be Greenguard and IGBC certified. All accessories shall be of stainless steel of grade SS 304 including all hardware/fittings. The pilasters are anchored to the flooring using adjustable SS legs. The SS top rail shall be fixed on the top of the pilasters. Accessories include SS Hings, SS Door knob, SS legs, SS thumb turn indicator, SS coat hook, SS top rail and SS channels. All complete as per direction of Engineer-in-charge.

Providing and fixing 6mm thick Clear mirror by suitable adhesive on 12mm plywood surafce which is fixed on the wall with necessary screws, in required size and shape, at all levels as per direction of E-I-C.

Providing and fixing Pressure Reducing Valve ( make - Honeywell or equivalent) with in built water filter and manual adjustable outlet pressure setting arrangement from 1-6 bar : 40mm .

Providing and fixing Pressure Reducing Valve ( make - Honeywell or equivalent) with in built water filter and manual adjustable outlet pressure setting arrangement from 1-6 bar : 32mm .

Providing & fixing of Forged Brass Controlling Ball Valve of dia 40mm (make-Honeywell or equivalent) all complete as per direction of Engg.-in-charge.

Providing & fixing of Forged Brass controlling Ball Valve of dia 50mm (make-Honeywell or equivalent) all complete as per direction of Engg.-in-charge.

Providing and fixing 11.52mm Heat soaked clear toughened laminated glass (5mm heat soaked toughened clear float glass +1.52mm P.V.B. Lamination +5mm heat soaked toughened clear glass) at all heights. Glass panels of required size and shape of approved make confirming to relevant specifications as per the direction of Engineer-In-Charge. Float glass conforming to IS 14900 (2000): Transparent Float Glass shall be used for processing toughened glass. Toughening, which shall be carried out horizontally (without tong -marks), shall conform to IS 2553 (Part 1) : 2018. Nothing extra shall be paid for scaffoldings, odd size and making holes etc as per site conditions.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required includingcleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing stainless steel 4 Leg spider fittings of grade SS-316 along with articulated bolt and Fixed Bolt holder on existing M.S. structural framework for fixing frameless Glass Cladding around Glass Lifts all complete as per drawings and design. (Cost of providing and fixing glass cladding will be paid seperately).

Providing and fixing stainless steel 2 Leg spider fittings of grade SS-316 along with articulated bolt and Fixed Bolt holder on existing M.S. structural framework for fixing frameless Glass Cladding around Glass Lifts all complete as per drawings and design. (Cost of providing and fixing glass cladding will be paid seperately).

Providing and fixing stainless steel 1 Leg spider fittings of grade SS-316 along with articulated bolt and Fixed Bolt holder on existing M.S. structural framework for fixing frameless Glass Cladding around Glass Lifts all complete as per drawings and design. (Cost of providing and fixing glass cladding will be paid seperately).

Providing and fixing of mechanical anchor fasteners named Std Stud Anchor HSV M16x150mm(Make- Hilti) on C.C. /R.C.C. surface backing including drilling necessary holes as per direction of Engineering -in- charge.

Providing and fixing chemical Fastener named Anchor rod HAS-U 5.8 M16x165mm(Make- Hilti) along with Injectable Mortar HY-200-R V3 500/2 (1 anchor rod requires 25ml of the chemical) on C.C. /R.C.C. surface backing including drilling necessary holes as per direction of Engineering -in- charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Kiln seasoned and chemically treated hollock wood

Providing and fixing ISI marked, IS : 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete :a) 100x75x3.50 mm

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1stclass hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 250x10 mm

Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

Providing and fixing chromium plated brass handles with necessary screws etc complete:125mm

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.

Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-incharge.( Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment). Overhead informatory road signage

Providing and applying 2.5 mm thick road marking strips (retroreflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry uarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.

Providing and applying crystalline mortar by mixing in the ratio of 4.5 : 1 (4.5 parts crystalline mortar : 1 part water) for the treatment of faulty construction joints, cracks, tie rod holes and spalled & honeycombed surface of RCC underground structures like basement, water tanks, bridge deck etc. to ensure water tightness. The crystallie mortar shall conform to the EN 1504-3 having compressive strength Class R4 ?45 MPa and adhesive bond strength Class R3 ?1.5 MPa. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. For sealing cracks and faulty construction joints, routed out/making U-shape groove size 25x25mm and then primed the area with integral crystalline slurry @0.05kg/ running metre and while the surface is tacky filled the groove upto surface with crystalline mortar @1.50kg/ running metre. Once crystalline mortar is touch dry then finally applied two coats of integral crystalline slurry @0.05kg/running metre per coat.

Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge 50mm average thickness

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge. Bars upto 12 mm diameter

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/ masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in- Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make

Providing and inserting 12mm dia galvanised steel injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20mm to 30mm) up to depth from 30mm to 80mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer-In-Charge

Providing check in counter of required size for airport operations at NSCBI Airport. The counter is to be fabricated with 19 mm ply (Confirming to IS 710) as per detailed drawings. The counter is to be finished with 12 mm thick acrylic polymer sheet and 1mm thick laminate sheet as per detailed drawings. The work includes fabrication and providing counters at desried location completely finished with as per drawing i/c draweres,cabinets, slides and pedestals. The rate shall include cost for all materials i/c wastages,screws,nails, adhesives, primers etc and accesories like handles, slides, locks et for cabinet and drawers etc. all complete as per direction of E-I-C.

Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by Engineer-in-charge consisting of:(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug. (b) Stringers system in all steel construction hot dipped galvanized of rectangular size 570x20x30x0.80mm thick having holes at both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge. (c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product. 300 mm Finished Floor Height (FFH)

Providing and fixing of 3M Sun Control Window Film Night Vision NV 15 at all height as per satisfaction of Engineer-in-charge. (Cost of Scaffoldings is included in the item and Nothing Extra shall be paid.)

Polishing of existing surface of granite starting from the first cut to the final finishthrough following steps: 1st step – Polishing has to be done with 30, 100, 200, 400 no. Diamond adhesive pad and AKEMI or equivalent crystallizer for regain of smoothness. (Wet process) 2nd step- Polishing has to be done with 800, 1500, 2000, 3000, 5000, 8000 no. Diamond adhesive pad and AKEMI or equivalent crystallizer for glowing and shining. (Wet process) 3rd step- Buffing has to be done with 3M pad with buffing chemical. (Dry process) all complete as per direction and satisfaction of Engineer-in-charge and nothing extra shall be payable

Core cutting with diamond core cutting system of 150 mm dia for 300 mm depth of RCC slab.

Providing and fixing wall paneling with 19mm thick marine ply (Confirming to IS 710) of approved make with decorative laminates of 1 mm thick of approved make. The panelling should be fabricated with necessary coves and the centre portion of the panel will be decorated with artificial premium quality grass as per approved design. The job should be completed in all respect as per direction and satisfaction of E-I-C and nothing extra shall be payable.

Providing and fixing wall paneling with 19mm thick marine ply (Confirming to IS 710) of approved make with decorative laminates of 1mm thick of approved make. The panelling should be fabricated with necessary coves if required and 6mm thick mirror of approved brand shall be placed at centre portion of the panel. The job should be completed in all respect as per approved design and direction and satisfaction of E-I-C and nothing extra shall be payable.

Providing and fixing wall paneling with 19mm thick marine ply (Confirming to IS 710) of approved make with decorative metal finished laminates of 1mm thick of approved make, texture and colour. The job should be completed in all respect as per direction and satisfaction of E-I-C and nothing extra shall be payable.

Providing and fixing wall paneling with 19mm thick marine ply (Confirming to IS 710) of approved make with decorative laminates of 1mm thick of approved make. The panelling should be fabricated with necessary coves and the centre portion of the panel will be decorated with artificial premium quality grass and metallic finished Semi gloss synthetic board of TREE look considering shape and size as per approved design. The job should be completed in all respect as per direction and satisfaction of E-I-C and nothing extra shall be payable.

Providing and fixing Gents/ Ladies Signage of required shape and size of 3ft x 1.5 ft. Round head fabricated with powder coated (Min. 50 micron) 2mm thick MS sheet, and lower part with illuminated (LED strip having minimum system Lumen output of 400 lumen or more, CCT 4000K ± 5%, CRI >80, IP20 very easy to bend & install and operating input voltage 24 V DC suitable for commercial LED lighting) acrylic housing considering shade as per approved design. The job should be completed in all respect as per direction and satisfaction of E-I-C and nothing extra shall be payable.

Providing and fixing wall hung fabricated structure of size 3ft x 6ft with 40* 40 *2 MS hollow section of required shape with premium quality MS powder coated (Min. 50 micron) structure of required shade with golden highlighter as per approved design. The job should be completed in all respect as per direction and satisfaction of E-I-C and nothing extra shall be payable.

Providing and fixing premium quality Asian Paints Linda Nilaya wallpaper of Model no. W112WL10B75 or equivalent at all height with necessary glue or adhesive. The job should be completed in all respect as per direction and satisfaction of E-I-C and nothing extra shall be payable.

Providing and fixing premium quality premium quality 8 mm thick wooden flooring of Merbau Oak texture or equivalent of approved brand with necessary glue or adhesive. The job should be completed in all respect as per direction and satisfaction of E-I-C and nothing extra shall be payable.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Supply of 24W ±5% RECESS MOUNTING DOWNLIGHTER having minimum Lumen efficacy 120 lumen/Watt, CCT 5700K ± 5%, CRI ≥80, White powder coated, backlit LED, elegantly designed pressure die-cast aluminium heat sink for efficient heat dissipation opal diffuser for uniform light distribution, High efficiency long life SMD LED module, Powered by integral SMPS based constant current electronic driver with lower THD, Output Short Circuit Protection, Surge Protection 4KV or more and other safety tests as latest IS specification suitable for fixing into false ceiling by 2 nos. SS springs / clips etc. complete as required as per technical specification of the item.

Supply of High quality LED flexible strip of 5W/meter having minimum system Lumen output of 400 lumen or more, CCT 4000K ± 5%, CRI ≥80, IP20 very easy to bend & install and operating input voltage 24 V DC suitable for comercial LED lighting.

Supply of 25W LED strip light driver with min. build in surge protection of 2.5kV & neccesary protections suitable for BOQ item no. 2 LED strip light.

Installation, testing and commissioning of RECESS MOUNTING type LED DOWNLIGHTER complete with all accessories like Electronic driver etc. including connections with single core 1.5 sq. mm FRLS PVC insulated flexible copper cable in G.I. flexible and earthing etc. as required.

Installation, testing and commissioning of LED strip light with 3M make 12 mm. width double sided adhesive tape and other necessary accessories for mounting the strip light with good finishing as per satisfaction of AAI at instructed locations inside T2 and making connection with drivers, power circuit as complete as required to illuminate the LED strip.

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed steel conduit as required.

(a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

(b) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

(c) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit / submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed G.I. flexible conduit as required.

(a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for light point/ fan point/ exhaust fan point / call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

(a) Group A

(b) Group B

(c) Group C

Supply, fixing, testing and balancing of G.S.S square / rectangular site fabricated ducting complete with gaskets, elbows, splitters, vanes, canvas, supports etc. as per drawings and as required for air distribution.

(a) 24 gauge

Supply, fixing, testing and balancing of of powder coated extruded aluminium section return air grills with louvers but without volume control dampers complete as required. (Size of each grill should not be less than 200 mm x 200 mm)

Supply of Cabinet direct drive inline fan with 20G Galvanised Steel Sheet cabinet complete with inlet and outlet spigots, mounting brackets, access panel, filter fixing arrangements suitable for inline mounting comprising of forward curved DIDW impeller complete with single phase squirrel cage induction motor, metal clad MCB (20 Amp, 10 KA) and starter, suitable length cable, earthing all complete as required , suitable for single phase 230 Volts 50 HZ AC supply as per specifications of following capacities:- 3000 CMH Inline Fan.

ITC of Cabinet direct drive inline fan with 20G Galvanised Steel Sheet cabinet complete with inlet and outlet spigots, mounting brackets, access panel, filter fixing arrangements suitable for inline mounting comprising of forward curved DIDW impeller complete with single phase squirrel cage induction motor, metal clad MCB (20 Amp, 10 KA) and starter, suitable length cable, earthing all complete as required , suitable for single phase 230 Volts 50 HZ AC supply as per specifications of following capacities:- 3000 CMH Inline Fan.

Saha Building Centre Pvt Ltd