CA NO. CWE/HILLS/PGH/168 OF 2025-2026 REPAIR TO ROAD/PATH, ROAD PROTECTIVE WORKS SUCH AS DRAINAGE ETC AT 7 A, 7 C AND 7 D AREA AT MIL STN PITHORAGARH

Dismantling of interlocking paver block laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and directed

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm & not exc 50 mm and n.exc 100 mm deep complete all as specified and directed.

M&L for 75mm thick (compacted thickness) WBM with coarse aggregate of grading 2 (63 to 40mm size) or of grading 3(50 to 20mm size) of granite, trap or basalt, spread, rolled and consolidated to required gradient and camber complete all as specified and directed.

M&L for preparing unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc , sweeping with brooms and finally fanning the cleaned surfaces with mechanical blower and gunny bags to remove all loose dirt etc and applying evenly tack coat with bituminious primer using paving bitumen (VG-10) grade @ 10 kg/10 Sqm complete all as specified and directed.

M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for providing premix bituminious macadam laid rolled and compacted to required gradient and camber in any thickness using paving bitumen (VG-30) grade @ 4% by weight of total mix complete all as specified and directed.

M&L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly tack coat with bituminious primer using paving bitumen (VG-10) grade @ 5 kg/10 Sqm all as specified and as directed.

M&L for providing 30 mm thick (consolidated thickness) premixed bituminious carpet with 0.41 Cum of stone chipping (0.28 cum of 12.5mm size and 0.13 cum of 10mm size) mixed with 21.90 kg of binder paving bitumen (VG-30) rolled and compacted with vibratory roller and 8 to 10 tonne power roller to required camber and gradient and applying Premixed sand seal coat using 0.06 Cum of coarse sand mixed with 6.80 Kg bitumin (VG-30) per 10Sqm, applied and rolled to a uniform and smooth surfaces all as specified and as directed.

M&L for laying hot applied thermoplastic compound ( paint) 2.5 mm thick including reflecting glass bead incl cost of all materials labour machinery T&P etc required for proper completion of work incl all other charges .The finished surfaces to be level uniform and free from streaks and holes as per MORTH specification No 803 as per IRC Painting lines dashes arrows letters etc on road pavements and the like exec 10 cm wide and road making paint white or golden yellow complete all as specified and directed.

Supply and fixing in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed.

S&F in repairs solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed.

S&F in repairs metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B-1 complete all as specified and directed.

Demolition of precast concrete block walling, dressed stone work built in cement mortar complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L precast cement concrete Block Masonary with soilid blocks type C-1 1:3:6 (20mm graded stone aggregate) exc 10cm in width and setting in mortar1:6 complete all as specified and directed .

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 finished even and smooth (w/o using extra cement) incl liquid water proofing compound as per manufacturer's instruction complete all as specified and directed.

M&L for applying two coat of cement base paint over a coat of alkali resistant primer on new plastered surfaces of wall all as specified incl preparation of surface complete all as specified and directed.

M&L for providing cement concrete Type C-2, 1:3:6 (using 40mm graded aggregate)as in Surface channels and drains complete all as specified & directed.

M&L PCC type B-1,1:2:4 (20mm graded stone aggregate) as in coping etc complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl forms, moulds, mitred stopped ends etc.

S&F in repairs speed bumps, made of heavy duty tough rubber of size 500 mm x 365 mm x 50 mm, black and yellow in colour, Make- Dark eye model no DA 1008 or equivalent in 3M/STP Ltd, complete all as specified and as directed.

Providing and laying 60mm thick factory made chamfered edge cement concrete paver block/cobble stone of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; Complete all as specified and directed.

M & L for 50 mm thick PCC 1:3:6 type C-1 using 20mm gradd stone aggregate as in floors for levelling course on existing cleaned surface etc for laying paver blocks, chequered tiles etc finished rough to receive floor finishes complete all as specified and directed.

M & L for precast concrete Kerb Stones factory made of type B1, 1 : 2 : 4 (20mm graded stone aggregate) 10 to 15 cm thick and and setting in CM 1 : 6 including taking out existing broken stone with necessary excavation etc complete all as specified and directed.

M&L for applying two coat of synthetic enamel paint of kerb stone after prepearing new surface and applying one coat of primer of approved colour and design all as specified and directed.

Please Enable Macros to View BoQ information