PROVN OF TWO TOILETS AT SUC AND CMIR ONE TOILET AND TWO URINAL POINT WB NEAR COY GARAGE AND CERTAIN OTHER SANCTIONED WORKS AT PALAMPUR AND ALHILAL MIL STN

Surface Excavation not exceeding 30 cm deep and averaging 15 cm getting out in soft/loose soil, complete all as specified and directed.

Excavation in trenches n exc 1.5mtr wide and n exc 1.5mtr in depth for foundation etc in any type of soil and getting out soil, complete all as specified and directed.

M&L 150 mm th hardcore of gauge n exc 63 mm ,deposited ,spread and levelled in layers ,watered and rammed to a true surface. complete all as specified.

M&L Plain cement concrete, M- 10 (Nominal Mix), type C-2 (using 40mm graded crushed stone aggregates) as in foundation filling and mass concrete, complete all as specified and directed.

M&L Walling of random rubble stone masonry uncoursed, brought up to course with best quality locally available harder stones such as granite, trap, basalt stone etc, well bonded, bedded and solidly hearted , built in cement mortar 1:6 etc, complete all as specified

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6, complete all as specified and directed.

Returning filling in (soil) incl spreading, levelling , watering and well ramming in layers n exc 25cm thick, complete all as specified and directed.

Removing of surplus soil to a distance n exc 50 mtr and depositing where directed at a level n exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L 15 mm thick plastering in cement mortar 1:4 on brick surfaces or concrete surface,as on internal surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Rendering 10 mm thick on stone masonry or other than fair faces of brick wall in cement mortar 1:6 finished even and fair without using extra cement,complete all as specified and directed.

M&L for Peparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted, complete all as specified and directed.

M&L for Peparation of new plastered or unplastered surfaces of walls and applying two coats of Oil bound distemper, white or tinted, complete all as specified and directed.

M&L 75mm thick, PCC M-10 (Nominal Mix), type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection/ foot path finished even and smooth without using extra cement, complete all as specified and directed.

M&L for Glazed ceramic tiles coloured in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or Lolour cement to match 7mm as in skirting / dado etc laid over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Non skid coloured/ digital ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile 300 x 300 mm / 400 x 400 mm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for Fair finished surfaces.

M&L for RCC M-20 Nominal mix (1:1.5:3) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for RCC M-20 Nominal mix (1:1.5:3) using 20 mm graded stone aggregate as in roof slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

S&F Solid PVC door frame of size 50x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, S&F in opening as per specification & drawing shown in SSR Part-II, complete all as spfd and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rails and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to in stiles & rails with suitable PVC sheet beading and joinned together with solvent cement S&F in frames at site as per specification and drawing shown in SSR Part-II, complete all as specified and directed.

S&F Aluminium butt hinges, 100mm long, B-21 A complete all as specified and directed.

S&F Aluminium anodised barrel tower bolt of extruded section, 200mm long complete all as specified and directed.

S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.

S&F Steel ventilator with top hung shutter incl hinges, steel peg stay, complete with glazing bars dove tailed or welded, complete all as specified and directed.

S&F 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each panes.

S&F PVC (SWR) pipes 75 mm bore dia, single socketed, in any length with rubber ring joints fixed to walls/ laid in trenches or in floors etc, complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints fixed to walls/ laid in trenches etc including taking down and removal from site, complete all as specified and directed.

S & F 75 mm bore PVC Bends (SWR)

S & F 75 mm bore PVC (SWR) T- Junction with ovel acces door

S & F 75 mm bore PVC (SWR) Bend with ovel acces door

S & F 110 mm bore PVC Bends (SWR)

S & F 110 mm bore PVC (SWR) T-Junction with ovel acces door

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement

S&F PVC (SWR) vent cowl 110 mm dia

S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

S&F Vitreous China wash down water closet pan Europian type (pedestal pattern), connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one all as specified and as directed.

S&F 10 Ltr capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete.

S&F PVC Connections 15 mm size with PTMT nuts of length 450mm complete all as specified.

S&F oval (colour as directed) counter wash basin of size 560 x 470 x205mm incl CP coupling and waste pipe complete all as specified and directed by Engineer-in-Charge.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Vitreous China urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brassscrews, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F Aluminium anodised Tubular towel rail, 20mm dia, 60 cm long, CP with a pair of brackets, fixed to wall with CP screw and PVC rowl plugs ,complete all as spfd and directed.

S&F soap dish any type fixed to plugs with chromium plated brass screws.

S&F CP bib taps 15mm bore cast copper alloy fancy type with crutch or butterfly, handle, screwed down, screwed for iron pipe.

S&F CP Swan Neck type Pillar taps fancy type 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nutsscrewed complete all as spfd and directed

S&F 15mm bore Angle valves, CP fancy type (ISI marked) two way screwed down, high pressure with crutch or butterfly handle, screwed both ends (externally threaded) complete all as specified and directed by EIC

S&F 20 mm Gun metal Gate valves fitted for iron pipe complete all as specified.

S&F 15mm dia GI water tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors all as specfied and as directed

S&F 20mm dia GI water tubes medium grade with all fittings and fixed complete to walls and ceilling or laid in floors all as specfied and as directed

M & L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size andpattern, finishing and sweeping extra sand; complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m in soft/loose soil and making good surface complete all as specified and directed

S&F Pre-painted galvatume aluminum zinc coating GI based corrugated stee sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, facia and fixed with self tapping screws as specified.

S&F mild steel work as in roof trusses(framed),trussed,purlins,crane gantries,rails and fastenings and heavy brackets (Beams,tee,angle,channel or flat section) including distance pieces,cleats etc conforming to fe-290-w,Gde-E-165,quality 'A' , complete all as specified and directed.

S & F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed

M&L Preparing new surface of steel of any description, over 10cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.

M&L TMT bars 10mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed.

M&L TMT bars bars 6 to 8mm dia and over, cut to length, bent to shape reqd, incl cranking, bending spirally for hooping for column, hooking end and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as spfd and directed.

S&F Providing and fixing tiled false ceiling of size 595 x 595mm in true horizontal level suspended on interlocking gypric metal grid of hot dipped galvanised steel section (galvanized @ 120 gsm/sqm, both side inclusive) consisting of 3600mm long main 'T' runner size 24x38mm and 0.30mm thick,1200mm long cross 'T' of size 24 x 25mm and 0.30mm thick, 600mm secondary cross 'T' of size 24 x 25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main 'T' runners are then suspended from ceiling using GI sloted cleats of size 27x37x25x1.6m fixed to ceiling with 8mm dia and 45mm long dashfasteners, 4mm GI adjustable rods with galvanised buttrtfly level clips of size 85x30x0.8mm spaced at max 1200mm centre to centre along main 'T' and not more than 150mm from spliced joints.The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross 'T' is interlocked between the main 'T' at 600mm center to center to form a grid of 1200x600mm and then secondary cross 'T of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm. Cross tees at the ends having length more than 600mm are to be supported independently. Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on backside & PVC paper on front side wrapped around edges to be placedin grid complete all as specified and directed.

M&L 75 mm Thick PCC 1:4:8 Type D-2 using 40 mm graded crushed stone aggregate as in sub base complete all as specified and as directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm.

M&L hardcore of guage exc 63mm but not exc 100mm, deposited, spread and levelled in layer not exc 15cm thick, watered and rolled/rammed to a true surface complete all as specified and directed.

Excavation over areas not exc 1.5m depth and getting out in any type of soil complete all as specified and directedd.

Excavation over areas exc 1.5m but not exc 3.0m depth depth and getting out in any type of soil complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:4 for septic tank, complete all as specified and directed.

M&L for 20mm thick rendering in CM 1:3 on internal surfaces of wall for septic tank

M&L for 200mm thick PCC 1:2:4 type B2 using 40mm graded stone aggregate as in flooring of septic tank complete all as specified and directed.

S&F PVC (SWR) pipes 110 mm bore dia, single socketed in any length with rubber ring joints etc, complete all as specified and directed.

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

M&L for RCC (Nominal mix) Type (1:2:

4) using 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L for RCC 1:2:4 type B-1(using 20mm graded stone aggregate) as in cover slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like

M&L for broken bricks loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells .

M&L 50mm thick, PCC M-10 (Nominal Mix), type C-2 (using 40mm graded crushed stone aggregates) as in plinth protection/ foot path finished even and smooth without using extra cement, complete all as specified and directed.

S & F 75 mm bore PVC (SWR) T- Junction

S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate and finished with even and smooth using extra cement for septic tank complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exc. 50 m in soft/loose soil and making good surface complete all as specified and directed

S&F CP 15 mm bore stop valve/angle cock cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions but fancy type, chromium plated with long shank and cup (concealed type) complete.

S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc conforming to fe-290-w,Gde-E-165,quality 'A' , complete all as specified and directed.

Rough excavation not exc 1.5m deep and getting out in any type of soil.

Cutting upto a depth of 7.50 cm into concrete walls and trimming surface as required, girth exc. 30 cm where with or without reinforcement complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L RCC M-30 (using 20mm graded crushed stone aggregate) design mix for foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; complete all as specified and directedd.

M&L RCC M-30 design mix (using 20mm graded stone aggregate) walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings, including attached pilaster and buttresses complete all as specified and directed.

Use and waste of formwork to sides of concrete foundation, footing, bases of columns, rafts and rafts beams and similar work, vertical or to batter for rough finished surfaces of concrete complete all as specified and directed.

Use and waste of steel form work to fair face of wall retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses etc like for flat fair finished surface all as specified.

TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M&L PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) in surface channels and drains etc including necessary formwork, complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends

Per Point

One light controlled by one switch 5 Amp , SP , one way 240 volts

One Ceiling /Exhaust fan point controlled by one switch SP , one way, 5 Amp , 240 volts.

One multi pin socket outlet 5 amp same board .

S&F Socket, 6A - 2/3 pin combined 2 module, 240 volts ISI marked complete all as specified and directed.

S&F Modular Switch one way 6 Amp, one module 240 volts ISI marked complete all as specified and directed.

S&F ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings non ISI Marked complete.

S&F LED Bulb 09/10 watt with provision of fixed in Lamp holder complete.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt, 6500K fitting, incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed.

S & F in repairs factory made DB SPN 4 way double door with 200 Amps rated bus bar concealed in wall IP 42/43 protection, 240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash color/surfaces complete all as specified and directed.Note: Distribution board and MCB's should be same make.

S&F in replacement 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity SP 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

S &F in replacement of SPN 40 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

M&L for PCC 1:3:6 type C1 using 20mm graded stone aggreagate as in coping complete all as specified and directed.

Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 6 sq. mm 2 core in service connections complete all as specified and directed.

5 mm MS Flat in 'D' shape 500 mm legth grouted in wall complete 01 x 6 Sqmm multistrand PVC insulated copper conductor ( Green Colour) to be provided from test point to DB through 20 mm dia concealed non metallic conduit complete all as specified and directed.

Each Set

S&F LED 'T' Type Mirror light fitting 09/10 watt with provision of fixed in Lamp holder complete.

S&F Bulk head fitting 10W a compact and efficient lighting solution designed outdoor use and also features a sturdy, weather-resistant casing complete all as specified and directed.

S & F factory made DB SPN 4 way double door with 200 Amps rated bus bar concealed in wall IP 42/43 protection, 240V for fixing MCB & making good to disturbed surfaces as well as matching with existing whitewash color/surfaces complete all as specified and directed.Note: Distribution board and MCB's should be same make.

S&F tube medium grade galvanised with all fitting laid in trenches, of 25 mm dia complete all as specified and directed.

M&L construction of valve pit of inner sizes up to 60 cmx 60cm x 60cm brick masonry construction complete All internal surface and external surface upto 15 cm below normal ground level of brick masonry shall be plastered 15mm thick in cement mortar 1:4, finish even and smooth including necessary excavation and earth work in any type of soil and PCC work all as per TD drg complete all as specified and directed.