Supply, fabrication, painting and Erection of Regulator shutter at Aayakkolli Padasekharam near to PIP Vanavathukkara Distributary canal

Amount

Supply, fabrication and erection of Embedded parts, Providing SS cladding and associated civil works

OD26181/2024-2025:Clearing grass from banks of canal and removal of silt, zoological waste and other debris from canal bed including removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

OD15888/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD15887/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD15894/2024-2025:Supply of MS round bar (12mm dia and below) including cost of conveyance charges

OD15886/2024-2025:Supply of MS Bolts and nuts.

OD15885/2024-2025:Fabrication and erection of Embedded parts for canal shutters ( Up to 2 tonne weight ) and accessories as per approved specifications, drawings and directions of dept. officer at site including cost of labour, machinery, all leads and lift, incidental and handling charges etc complete but excluding cost of material already supplied.

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

OD22105/2024-2025:Fabrication, Supply, erection and assembling in correct position and alignment by welding SS Embedded parts in 304L Grade like roller track, seal track,Seal seat etc as per approved specifications, drawings and directions of deptl officer at site including cost of all materials,labour,machinery for planing, welding,shearing, grinding etc,lead and lift, conveyance, incidental and handling etc complete

OD22109/2024-2025:RING BUND Type II Putting up ring bund with earth filled gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work etc. complete.

50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

OD26183/2024-2025:Providing temporary platform for demolishing existing civil structure, concreting and plastering including cost of all materials, labours etc. complete TEMPORARY PLATFORM [40 times usage as life period (assumed) for these materials, hence cost for 1 time used]

Supply, Fabrication, Painting & Erection of new shutters, Providing new thrust rollers etc.

OD15559/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD15562/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

OD24868/2024-2025:Supply of MS round bar including cost of conveyance charges

OD15564/2024-2025:Supply of MS Bolts and nuts.

OD15898/2024-2025:Fabrication of Structural steel canal shutters (up to 2 ton weight) and accessories etc. as per approved specifications or drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

85.114:Painting all the exposed surfaces of the gate and embedded parts with two coats of epoxy coal tar black paint confirming to IS14948 with a minimum film thickness of 150+/-5 microns per each coat over two coats of priming coat applied with zinc primer containing not less than 85% of zinc on dry film with a film thickness of 70+/-5 microns , so that the total film thickness of all coats including priming coat at any rate is not less than 350 microns after cleaning the surface using hand and power tool cleaning including cost of all materials, labour charges , cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD15897/2024-2025:Erection of the Canal Shutter ( Up to 2 Tonne weight ) and accessories safely in the grooves , assembling and aligning including cost of all machinery, labour all incidental and conveyance charges etc. complete as per direction of departmental officer at site.

OD22110/2024-2025:Supplying and fixing specified cast steel thrust roller assembly having 180mm OD, 65mm ID, 60mm tread width, SS shaft 55mm OD, 170mm L and accessories including cost of all materials, machineries, labour , all lift and lead, incidental and conveyance charges etc complete.

Supply, Fabrication, Painting & Erection of MS Hoisting structure, Providing new hoisting mechanism etc

OD15909/2024-2025:Supply of MS plates confirming to IS 2062GrB including cost of conveyance charges

OD15908/2024-2025:Supply of MS Tees, Angles, Joists, ISMB, ISMC confirming to IS2062GrA/B including cost of conveyance charges

85.103:Supply of MS checquered plates including cost of conveyance charges

OD16181/2024-2025:Supply of GI Pipe 40mm dia

OD26182/2024-2025:Supply of MS round bar including cost of conveyance charges

OD15907/2024-2025:Supply of MS Bolts and nuts.

OD15906/2024-2025:Fabrication of Structural steel Hoisting platform and accessories etc. as per approved specifications or drawings and directions of deptl officer at site including cost of labour, machinery, all leads and lifts, incidental and handling charges etc complete but excluding cost of material already supplied.

OD15903/2024-2025:Providing of Double worm and pinion having a lifting speed of around 5.00cm/min for hand operation /manual operation including cost of all materials, Iabour, hire charges and conveyance.

OD15904/2024-2025:Providing EN-8 screw rod 7.50 tonne capacity 4.00M lift screw hoist having one number of EN-8 screw shaft having a lifting speed of around 5.00 cm/min for 24 rpm of hand operation including cost of all materials, labour, hire charges and conveyance.

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

OD16205/2024-2025:Conveying manually (distance min 50m & up to 200m) the fabricated shutter (Wt of shutter less than 1 ton) and other materials from road side to site.

Providing new rubber seals, erection of hoisting unit and conducting trial run.

OD18286/2024-2025:Supplying and fixing in correct position with specified initial interface L-type/Bulb nose rubber seal confirming to IS11855 to the canal shutters including cost of MS bolts & Nuts, all labour, machinery, incidental and conveyance charges complete as per approved specification or drawing.

OD18285/2024-2025:Supplying and fixing in correct position with specified initial interface the flat type rubber seal confirming to IS 11855 to the canal gates including cost of MS bolts and nuts, all labour and machinery and incidental and conveyance charges complete as per approved specification or drawing.

OD18282/2024-2025:Erection of the Hoisting Platform and accessories including hand rails , ladder etc. for the same including alignment correction, setting, fixing etc complete including cost of all labour, machinery, incidental and conveyance , lead and lift charges etc. complete as per direction of departmental officer at site.

OD16206/2024-2025:Trial run of the new shutter with its hoisting mechanism and applying grease on screw rod including cost of labour, all lead and lift etc complete as per the direction of deptl officer at site.

Bidder Name

R K BABU