Setting up of Digital Content Creation Lab including Infrastructure, Networking

A. Production Studios & Control room (Detailed Spec. as per Anx.5 in Tender document) Full HD PTZ Camera

4K Professional Camera

Lavalier Lapel Microphone Wireless

Handheld Wireless Microphones.

PA speakers for the Hall

Audio Mixer

Reference Monitor for Audio

Professional Headphone

Ultra Short through Projector Screen

Video Mixer

Talk Back System

High end PC for Audio Production

Fire Safety System

Rodent Repellent System

Podium

Wired Boundary Microphone

Wireless Boundary Microphone

Digital Sound Processing Unit

Monitor 32”

Writing White board

Video Recorder

Microphone and accessories

B. Area Edit Suite (Detailed Spec.as per Anx.5 in Tender document) Apple Mac without FCP

FCP editing software

Audio Capture Card & Recording Software.

Desktop Core i5

Reference Monitor for Audio

Professional Headphone

Audio Mixer

Installation Services

C. Area Faculty Conference Area (Detailed Spec.as per Anx.5 in Tender document) Monitor 32”

Installation Services

20 KV UPS for half an hour backup and SMF battery with stand(Optional)

Civil Work A.False Ceiling (Detailed Spec.as per Anx.5 in Tender document) (Absorptive ceilings )Supply and installation of Anutone Subtex Nubby, Steppe Edge, Glass fiber core fully encapsulated ceiling tile of size 595x595x15 mm having density 100-120 kg/cum weight 1.5-1.8 kg/sqm which is suspended by using 0.3mm thick and 15mm wide pre coated metal T15 grid system. Technical parameters : core- Glass fibre, fire - glass I and P, Acoustics- NRC 0..Climate (OCRH)-40,95, termite resistance light reflectance-85%, Green (RC%) -35, Hygiene (VOC, clean room)-low class 3, strength, load capacity (kg)-Antisag / AMF -Knauf Germany or its equivalent for Studio Hall

(Absorptive ceilings )Supply and installation of Anutone Subtex Nubby, Steppe Edge, Glass fiber core fully encapsulated ceiling tile of size 595x595x15 mm having density 100-120 kg/cum weight 1.5-1.8 kg/sqm which is suspended by using 0.3mm thick and 15mm wide pre coated metal T15 grid system. Technical parameters : core- Glass fibre, fire - glass I and P, Acoustics- NRC 0..Climate (OCRH)-40,95, termite resistance light reflectance-85%, Green (RC%) -35, Hygiene (VOC, clean room)-low class 3, strength, load capacity (kg)-Antisag / AMF -Knauf Germany or its equivalent for Audio Production Room

(Absorptive ceilings )Supply and installation of Anutone Subtex Nubby, Steppe Edge, Glass fibre core fully encapsulated ceiling tile of size 595x595x15 mm having density 100-120 kg/cum weight 1.5-1.8 kg/sqm which is suspended by using 0.3mm thick and 15mm wide pre coated metal T15 grid system. Technical parameters : core- Glass fibre, fire - glass I and P, Acoustics- NRC 0..Climate (OCRH)-40,95, termite resistance light reflectance-85%, Green (RC%) -35, Hygiene (VOC, clean room)-low class 3, strength, load capacity (kg)-Antisag / AMF -Knauf Germany or its equivalent for Audio Control Room & Studio Hall

Painting on the existing ceiling : With one coat primer two coat putty, two coat emulsion interior grade paint (Asian/ Berger/ Equivalent) for Editing room

Painting on the existing ceiling : With one coat primer two coat putty, two coat emulsion interior grade paint (Asian/ Berger/ Equivalent) for Visitor Room

B.Wall Finishes Work (Detailed Spec.as per Anx.5 in Tender document) Acoustic Wooden paneling: Acoustic wooden panel consist of 16 mm teak veneered MDF with acoustical groove cnc design with black perforated fabric layered structure. Fixed on the wall with necessary pine wood hook button with thermal & acoustical glass wool of 50 mm thick 24 kg/m2 density inlayed to get the proper acoustical function

Providing and fixing glass paneling with 8mm thick toughened glass on either side of wooden frames with 16mm air gap the glass should be air tightened with silicon etc complete as per the direction of Engineer in charge to get the acoustic effect

Wooden Acoustic Doors 40 mm the finishes matching to the acoustic paneling with all hard ware’s like hinges, locks door closers etc

Wooden Flush door with frame and shutter with hardware’s.

Wall Painting ; Providing and applying wall painting with one coat primer, two coat wall putty, two coat interior emulsion paint for Editing Room

Wall Painting ; Providing and applying wall painting with one coat primer, two coat wall putty, two coat interior emulsion paint for Visiting Room

C. Floor Finishes (Detailed Spec.as per Anx.5 in Tender document) Providing & Installing High raised floor for the lecture stand and students sittings area from hight vaies 100 mm to 600 mm with MS frame works with 16 mm thick IS 710. Grade plywood screwed on the top of GI Framework for receiving the carpet/vinyl.

Providing & Installing 6 mm thick Non wooven fabric

Supply and fixing 1.5 mm thick wooden texture finish vinyl planks ( 6 inch x 42 inches ) laying using pidlite make glue

D.Furniture (Detailed Spec.as per Anx.5 in Tender document) a. Production Studios and Control room Desk and benches are legs and base structure made in solid teak wood with approved melamine polish finish , Top, front side, bottom back side of desk and benches are made of approved IS Grade 710 plywood with teak veneer finish with melamine polish. Desk width 350 mm x height 800 mm, bench width 400 mm x seating height 400 mm and Bach support height 800 mm. (25 Seating) for Production Studios and Control Room

Lecture Stand/Podium for the raised lecture area made BWR grade plywood with approved 1 mm thick laminate hot pressed at factory with matching edge banding around the edges. Rate inclusive of all provisions for electrical and other required cable works, all cutout for switches etc. for Production Studios and Control Room

Working Desk made of 19 mm 710 grade plywood with 1 mm approved laminate hot pressed at factory and edges to be lipped with matching edge bands. A cabinet with storage space to be provided below the table ( one person sitting) for Production Studios and Control Room

Height adjustable chair Godrej or equivalent make for Production Studios and Control Room

Working Desk L Type made of 19 mm 710 grade plywood with 1 mm approved laminate hot pressed at factory and edges to be lipped with matching edge bands. A cabinet with storage space to be provided below the table (3 person sitting)

Height adjustable chair Godrej or equivalent make for Production Studios and Control Room

b.Edit Suite Working Desk U shape made of 19 mm 710 grade plywood with 1 mm approved laminate hot pressed at factory and edges to be lipped with matching edge bands. A cabinet with storage space to be provided below the table (6 person sitting)

Height adjustable chair Godrej or equivalent make

c. Faculty Conference Area Sofa equivalent make 2+2+2+2+1+1 with centre table

Mini conference table 1800x900x750 mm made of 19 mm IS 710 grade plywood with approved 1 mm thick laminate hot pressed finish.

Height adjustable chair Godrej or equivalent Make

Electrical A. Production Studios & Control room ,Edit Suite, Faculty Conference Area (Detailed Spec.as per Anx.5 in Tender document) Single control light point without ceiling rose

Combined plug point with 6A,5 pin plug socket cont rolled by 6 A switch in the same switch board as that of light points.

Conveyance Installation, testing and commissioning of recess mounting down light fittings of all types directly in the existing opening on the false– ceiling including giving connections with required length of 16/0.20 mm3 core round copper conduct or flex wire conforming to relevant ISS or with the extended original wiring etc as required.

Supply of 20/25W 2000 Lumens LED 6500 Krecess mounted Square/Circular type luminarie with electronic driver (Philips makes DN195BLED20S-6500PSUWH SI/Equivalent make of Bajaj/Philips/Crompton/W ipro) Market rate.

20mm dia light gauge

25mm dia light gauge

20mm dia

1.50sqmm1run

1.50sqmm3run

1.50sqmm6run

2.50sqmm2run

2.50sqmm4run

4.00sqmm2run

4.00sqmm4run

10.00sqmm2run

10.00sqmm4run

50x50mmCMS with base & lid

End Cap

100x50mm CMS with base & lid

Cable divider

End Cap

Joint Cover

1 to 3 module mounting box

8 module mounting box

6 module metal box in recess

8 module metal box in recess

3 module metal box in recess

2 module metal box in recess

2 module white/off–white

3 module White/Off-white

6 module White/Off-white

8 module White/Off-white

6A SP 1Way Switch

16A SP 1Way switch

6A 3 pin shuttered socket

6/16A socket

32A DP Switch indicator (forA/CunitsP)

25A 3Pin plug socket(ForA/Cunits)

Blankplate1M

12 way single phase double cover(IP42/43)

6way(8+18)- double cover TPN vertical DB with provision for fixing MCC Basin comer and SP/TP MCB as out going(IP42/43)

FP enclosure for independent mounting of MCB/RCCB/RCBO

DP enclosure for independent mounting of MCB

S&F Mini break isolators

40 A double pole mini break isolator

63A four pole mini break isolator

40A,2pole,30mA RCCB

63A,4pole,30mA RCCB

6-32A( Ccurve)

40A,10kA,TPMCB(Ccurve)

63A.25/35(kA.les=100%lcu).4 pole Current limiting type MCCB having thermal setting range o f80-100% with thermal magnetic release.

B. Networking (Detailed Spec.as per Anx.5 in Tender document) Cat6 UTP Cable. Box of 305 Mtrs

Cat6 Information outlet.

Face plate Single.

Cat6 patch cord. 4 Ft.

Cat6 patch cord, 7 Ft.

Cat6 Patch panel Loaded. 24 Port

3 x 3 Surface mount box

25 mm PVC conduit including accessories

Wall mount enclosure of dimension 600 x 15U x 500D, with front sheet steel glass door, top and bottom cover with cable entry provision, side wall, 1 pair of 19 angle with wall mounting provision, fan 2 Nos, power strip 6 x 5A universal socket, 2M long power cord and captive hardware pack of 20

1U Closed cable organiser with cover

C.Labour /Installation Charges UTP Cable Laying charges.

Conduit laying charges

Fixing and termination of Information outlet

Fixing and termination of Patch panel

Fixing of rack

Edge Switch (HP 5120-24G SI Switch):- 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, 4 fixed SFP ports, 104 Gbps switching capacity,77 Mpps switching throughput/ Support Stacking/Virtualization with less than 50ms failover and support distance of minimum 1Kms

D. Air Conditioning Supplying, Installation, testing and commissioning of 8.5 TR capacity microprocessor based air conditioning ductable split units with all standard fittings like HP/LP cutout, single phase preventer, overload relay, dogotal display, R 22 Gas, multi/twin circuit scroll compressor for comfort air conditioning along with first charge of refrigerant complete etc as reqd. Make M/S Daikin /Voltas etc or ss make. The air cooled condenser shall be installed on Suitable MS stands.

Copper tubing S/F copper refrigerant piping (16 gauge hard drawn copper tubes) comprising of suction Line duly insulated with i/c cutting , bending, jointing, brazing, minor civil work etc. complete as required.

150mm width x 50 mm depth x1.6mm thickness

375mm widthx50mm depthx1.6mm thickness

0.71 mm (22 gauge)

0.56mm( 24 gauge)

Supply air grill Providing & fixing extruded aluminum powder coated/ natural anodized air grill with fixed front louver to the longer dimensions, Volume control dampers in the air duct as per specifications and free area not less than 60% of grill area.

Fire Damper Providing & fixing fire dampers in supply air paths as per specifications

Providing & fixing of 9mm thick cross link polyethyiene (XLPE) insulation for ducting, main plenum and supply duct i/c cleaning of duct,cutting and pasting of (XLPE) with the help of adhesive (SR 505) and 50mm self adhesive aluminum tape for making.

S/F of double panel sandwhich insulated return air plenum/Boxing made from 50mm x 50mm 22 gauge GI sheet channel with supports at 600mm. with min 6mm Bison Board panel on both sides duly secured with hardend self tapping scews sand whiched in as reqd.

Providing duct lining with 12mm thick fiberglass rigid board density 48KG/m3 (crown300) covered with aluminum perforated sheet for accousic etc. complete as required.

Supplying and laying 25mm dia size U PVC hard pipe ( ISI Marked) with fitting like elbow, tee socket etc. as required for condensate water drain.

Supply & fixing 4x2.5 sw.mm size 1.1 KV grade PVC insulated PVC sheathed copper conductor flexible cables on the existing surface of awall /ceiling /tray /surface with saddles/ PVC ties, end terminations glands, lugs as reqd

Supplying & fixing 6x 1 sq.mm size PVC insulated, PVC sheathed copper conductor multi core unarmored cable for control wiring on existing surface of wall/ ceiling/tray, end termination glands, lugs etc. as reqd.

Supplying & fixing 4x 10 sq.mm size 1.1 KV grade PVC insulated, PVC sheathed copper conductor flexible cables on the existing surface of awall/celling/tray/surface with saddles/ PVC ties, end terminations glands, lugs as reqd.

Supplying & fixing 4x 6 sq.mm size 1.1 KV grade PVC insulated, PVC sheathed copper conductor flexible cables on the existing surface of awall/celling /tray/surface with saddles/ PVC ties, end terminations glands, lugs as reqd.

Providing and fixing 10 SWG Copper earth wire on surface / cable tray for loop earthing along with existing surface conduit / cable as required.

Supply conveyance installation testing and commissioning of 2TR 3 star inverter split Air conditioner unit with low power consumption high wall mounted suitable for operating on 230V, 50 HZ single phase AC Supply and fitted with rotary compressor operating on R22 CFC refrigerant with copper condensing coil and evaporating units capable for cooling dehumidifying air circulating, microprocessor control with cordless remote etc. including refrigent, electric cable, copper pipe and thermal insulation up to 4 M as required with two year onsite warranty , 5 year compressor warranty and one year free service. (Voltas/Blue Star /Daikan/Carrier)100% copper.

Supply of 5 KVA voltage stabilizer for split type AC unit with Voltage range of 210-240V (V –Guard)

Condenser Stand

Geeta monitors Pvt Ltd