Loading
Loading…
Loading…
Tender Value
₹2.8 Cr
EMD Value
₹5.6 L
Closing Date
26 May 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Revenue
WORKS
16 conditions · 4 needing a document upload
Financial Eligibility Criteria:- The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB , along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
All rates are inclusive of GST and bidders should be registered in GST.
Technical Eligibility Criteria: (a) The tenderer must have successfully completed or substantially completed (Which should have been issued not prior to 60 days of date of invitation of present tender) any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited:(i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Note for Item 10.1: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Similar Nature of work:- " Any Track Work. "
12 conditions · 8 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case may be.(Para 14.1 (see Page-17 of GCC, April-2022) & Tenderer shall submit the documents in support of their constitution of the firm as per Para 14 of GCC, April-2022 (See Page-17 to 19).
As per instructions please attach proforma of ANNEXURE V-A this certificate is to be given by attorney/authorized signatory/each member of partnership firm / Joint Venture (JV)/ Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.) Non submission of above certificate (s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent up on the tenderer to identify, state and submit the supporting documents duly self-attested / digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document. Proforma is available in uploaded documents.
Certificate of Information regarding Employment/Partnership etc. of Retired Railway Employees with the tender as per the attached Performa. As per clause No 16 (a) and (b) of GCC Part-I April 2022 corrected up to date. (As per Para 16 of GCC, April2022 (See Page-19 to 20).
Restrictions on the Employment of Retired Engineers of Railway Services Within One Year of their Retirement: As per Para 59.9, of GCC, April-2022 (see Page-91).
Certificate of NO Relative being an employee of Western Railway as per attached Performa.
The tenderer should upload the scan copy of EPFO and ESI registration number. However EPFO and ESI registration would be mandatory and documents towards EPFO and ESI registration must be submitted before execution of the agreement.
In case of Bid Security in the form of Bank Guarantee, the same should be in favor of Sr. DFM Vadodara with the tender for due performance with the stipulation to keep the offer open till such date as specified in the tender, under condition of tender. (GCC April 2022 Part I Instructions to tenderers (ITT) para 5 Bid Security (1) (a,b,c),(2) (3)(i-viii). As per ACS 2 issued vide Rly. Board letter No.2022/CEI/ CT/GCC-2022/Policy date 13.12.2022: (ii) The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days before closing date for submission of bids. As pr ACS 5 RB No. 2022/CE-I/CT/GCC-2022/Policy date 20.10.2023:- Para 5(3) II The original bank guarantee should be delivered in person to the official nominated as indicated in the tender document before closing date for submission of bid.(i.e. excluding the last date of submission of bids).
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. As par Para 15 of GCC, April-2022 (see Page-19).
Maintenance period for the work is "NIL CALENDAR" from the certified date of the completion.
MYGL-DB Section :-Outsourcing of track maintenance activities under SSE(P.way) MYG in the jurisdiction of Sr.DEN/South/BRC for 02 years.
DRM-BRC-033-OF-2026-27
DRM-BRC-033-OF-2026-27
Open
Works - General
24 Months
Vadodara, Gujarat
₹0
₹5.6 L
26 May 2026
4 May 2026
12 May 2026
109 items across 8 schedules · ₹3,37,26,313.47 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Up to 40 m long rail panel | RM | 500.00 | 9.8 | 4,900 |
| 2 | Extra to Item no. 061011 for working on bridge | RM | 200.00 | 4.29 | 858 |
| 3 | For Casual/Scattered Rail Renewal work | RM | 500.00 | 38 | 19,000 |
| 4 | For Casual/Scattered Rail Renewal work | RM | 500.00 | 40.24 | 20,120 |
| 5 | For location of work not involving deep screening | Each | 200.00 | 365.06 | 73,012 |
| 6 | Locations other than Ballasted Deck Bridge | Each | 200.00 | 507.15 | 1,01,430 |
| 7 | Fish plates with 4 fish bolts. | Joint | 50.00 | 223.01 | 11,150.5 |
| 8 | Fish plates of 6 bolts. | Joint | 50.00 | 319.18 | 15,959 |
| 9 | Through Fitting Renewal (TFR) on PSC track, comprising of renewal of Grooved Rubber Pads, Liners and ERCs without damaging PSC sleepers. Scope includes removal of all fittings, cleaning of rail seat, rail flange at liner seats, and eye of Inserts with wire brushes and applying Grease Graphite Grade "O" (IS:408) to eye of insert and central leg of ERC with contractor's grease of Railway's specification, fixing all fittings in correct position and sealing liner edges with grease all complete including collection and stacking of released materials at nominated locations within SSE Jurisdiction as directed by Engineer-in- Charge. Note: All the fittings will be supplied at SSE/Stores/Depot. | Sleeper | 3000.00 | 35.3 | 1,05,900 |
| 10 | For 1.00m long fishplates | Joint | 100.00 | 129.19 | 12,919 |
| 11 | For 610 mm long fish plates. | Joint | 100.00 | 89.9 | 8,990 |
| 12 | Opening and refixing of Joggled fish plates provided to weld joints/rail of any rail section under traffic to enable examination of weld/rail by departmental official nominated by Engineer In charge and lubrication of fishplates by applying departmental Grease graphite grade 'O' (IS:408) to fishing planes and bolts by departmental black oil as per procedure laid down in latest version of IRPWM, including all tools required and as directed by Engineer-in-charge. Note: 1. Grease Graphite, black oil, fish bolts, K.Oil, wire brush, required for work shall be given by department and issued at concerned SSE/PW Stores. 2.Jammed fish bolts shall be cut using chisel and hammer and replaced with new bolt. | Set | 100.00 | 56.16 | 5,616 |
| 13 | Lubrication of ERCs and its liner contact area by removal of ERCs and Metal / GFN liners in rail panel, cleaning of rust / scale of ERC, Metal / GFN liners & SGCI insert by using wire brush, scrapper / sand emery paper etc supply and application of graphite grease, as prescribed by Railway for under side of liners & corresponding area of rail foot & SGCI insert with ERCs and re-fixing the same as per procedure prescribed in latest edition of IRPWM with contractors grease and all other tools & plants complete and as directed. Note: Each ERC in this item shall constitute 1 ERC and its Liner Contact area. | ERC | 250000.00 | 5.91 | 14,77,500 |
| 14 | Removing seized ERC from SGCI inserts of existing track by using suitable approved chemicals and re-fixing after greasing of insert eye and ERC with Contractor's grease of specified quality as per provisions of IRPWM, as directed by Engineer in-charge. Note: 1.List of Seized ERC along with location shall be prepared after inspection of SSE/P.Way and marked prior to execution of this item. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if SGCI insert is broken or sleeper gets cracked in the process. | ERC | 500.00 | 54.22 | 27,110 |
| 15 | Lubrication of gauge face of rail on curves, cross overs, points & crossings, turn-in curves and at locations as required with contractor's grease graphite grade "O" IS 408 and as directed. | RM | 5000.00 | 5.45 | 27,250 |
| 16 | By using Contractor's Grease Graphite | Each | 5000.00 | 40.38 | 2,01,900 |
| 17 | GRSP | Each | 1000.00 | 22.26 | 22,260 |
| 18 | ERCs | Each | 2000.00 | 7.43 | 14,860 |
| 19 | Metal/GFN Liners | Each | 2000.00 | 4.95 | 9,900 |
| 20 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw with specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 100.00 | 434.73 | 43,473 |
| 21 | Rail section of 52Kg and above | Each | 200.00 | 108.38 | 21,676 |
| 22 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 5.00 | 9,223.09 | 46,115.45 |
| 23 | 1 in 12 Turnout (Under Traffic Block) | Set | 3.00 | 41,060.82 | 1,23,182.46 |
| 24 | 1 in 8½ Turnouts | Set | 1.00 | 66,633.26 | 66,633.26 |
| 25 | 1 in 12 Turnouts | Set | 2.00 | 76,893.24 | 1,53,786.48 |
| 26 | Sleepers up to 2.85 m length | Each | 50.00 | 651.53 | 32,576.5 |
| 27 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 100.00 | 898.16 | 89,816 |
| 28 | Sleepers of more than 4.20 m length | Each | 50.00 | 1,416.3 | 70,815 |
| 29 | 1 in 12 Turnout | Set | 3.00 | 4,464.56 | 13,393.68 |
| 30 | 1 in 12 Switch Assembly | Set | 3.00 | 16,058.35 | 48,175.05 |
| 31 | For 1 in 12 Turnouts | Set | 3.00 | 32,825.5 | 98,476.5 |
| 32 | For 1 in 12 Turnouts | Set | 3.00 | 7,206.37 | 21,619.11 |
| 33 | For 1 in 8.5 Turnouts | Set | 2.00 | 5,765.1 | 11,530.2 |
| 34 | Renewal of corroded slide chairs duly removing the old slide chairs by heating using contractors gas and equipments or by any approved methods and inserting Railways new slide chairs and plate screws including crossing of tracks, leading all required materials to site, stacking all released materials, with all contractor's tools, consumables, labour, lead, lift and incidental charges etc complete as directed by the Engineer in charge. Note: 1. All the fittings will be supplied at nearest SSE/Stores. 2. In case of damage of PSC sleeper, penalty at the rate of 25% of the current cost of sleeper shall be levied. | Each | 50.00 | 389.32 | 19,466 |
| 35 | Turnout sleepers of length up to 2.85 m | Each | 100.00 | 147.2 | 14,720 |
| 36 | Sleepers of length more than 2.85 m and up to 4.20 m | Each | 200.00 | 176.64 | 35,328 |
| 37 | Sleepers of length more than 4.20 m | Each | 100.00 | 191.36 | 19,136 |
| 38 | Depth of 300 mm below bottom of sleeper of Plain Track | TRM | 300.00 | 488.11 | 1,46,433 |
| 39 | Extra to item nos. from 081011 to 081018 and from 081021 to 081028 for disposal of muck at a distance beyond 50m for every additional lead of 50 metres or part thereof up to 500 metres for 1 TRM in station yard / cutting. | Each | 100.00 | 5.94 | 594 |
| 40 | Boxing and profiling of ballast as per procedure prescribed in latest edition of IRPWM including cess dressing on both sides of track. The work will include removing excess ballast from track and putting the same in crib and shoulder by leading to a maximum of 50m including crossing of track, deweeding on ballast section etc and as directed by Engineer- In charge. | TRM | 120000.00 | 28.14 | 33,76,800 |
| 41 | Under Traffic Block Conditions: | cum | 3000.00 | 56.2 | 1,68,600 |
| 42 | For one shift ( 12 Hrs) | Each | 1500.00 | 1,281.08 | 19,21,620 |
| 43 | For PSC sleeper Track with Sleeper Density of 1540 Sleepers/Km or more | TRM | 7000.00 | 111.67 | 7,81,690 |
| 44 | For PSC Sleeper | TRM | 250.00 | 95.71 | 23,927.5 |
| 45 | Packing of isolated loose PSC sleepers on plain track below the bottom of the sleepers and surrounding through out its length duly opening two galas on either side of the renewed sleepers and packing the sleeper to bring the track to normal speed including gauging, aligning, squaring of sleepers and sectioning of ballast to the required profile with all contractor's labour, tools and plant etc. including all lead and lift and crossing of tracks where ever necessary complete and as directed by the Engineer-in- charge. | Sleeper | 500.00 | 86.43 | 43,215 |
| 46 | For PSC sleeper Track with Sleeper Density of 1540 sleepers/Km or more | TRM | 15000.00 | 190.47 | 28,57,050 |
| 47 | With Contractor's Hydraulic Rail tensor | TRM | 10000.00 | 52.13 | 5,21,300 |
| 48 | Without Rail tensor | TRM | 40000.00 | 47.35 | 18,94,000 |
| 49 | With Clamps | Set | 50.00 | 166.97 | 8,348.5 |
| 50 | With Contractor's hard wood block. | Each | 50.00 | 1,309.31 | 65,465.5 |
| 51 | Drilling holes of 16mm to 22mm dia. on all types of PSC sleepers and fixing the dowels with adhesive of RDSO approved quality for fixing check rails & guard rails, as directed by Engineer in-charge. | Each | 50.00 | 402.37 | 20,118.5 |
| 52 | Cleaning of side drains along the track including disposing of muck beyond Railway boundary as per instructions of Engineer in-charge to keep drains clean and clear in cuttings etc. | RM | 1000.00 | 34.63 | 34,630 |
| 53 | Removing weeds & bushes in ballast section and cess up to 3.95m from centre line of track in mid section & station yard, as specified by Engineer in-charge including disposal of branches, bushes outside cess/yard. | TRM | 400000.00 | 15.94 | 63,76,000 |
| 54 | 1 in 12 Turnout | Set | 20.00 | 1,497.63 | 29,952.6 |
| 55 | Derailing Switch | Set | 2.00 | 491.08 | 982.16 |
| 56 | Kilometre & Gradient post | Each | 50.00 | 110.67 | 5,533.5 |
| 57 | Curve details, SE, Versine, Station Nos. etc. per station. | Each | 1000.00 | 63.61 | 63,610 |
| 58 | HFL, FSL & DL on Bridge Pier / Abutment | Each | 50.00 | 805.99 | 40,299.5 |
| 59 | For day time block working | TRM | 120000.00 | 20.3 | 24,36,000 |
| 60 | Removing and refixing of guard Rails over slab bridges during machine packing with all contractor's men and materials duly removing fittings, leading guard rails to bridge approaches, lifting, dragging, positioning and crossing of track etc, and as directed by Engineer In charge. | TRM | 50.00 | 112.28 | 5,614 |
| 61 | 1 in 8½ Turnouts (Under Traffic Block Conditions) | Set | 5.00 | 9,996.74 | 49,983.7 |
| 62 | 1 in 12 Turnouts (Under Traffic Block Conditions) | Set | 25.00 | 11,639.19 | 2,90,979.75 |
| 63 | Derailing Switch (Under Traffic Block Conditions) | Set | 2.00 | 3,655.41 | 7,310.82 |
| 64 | 60 Kg - 110/90 UTS - Outside Track | Each | 50.00 | 242.54 | 12,127 |
| 65 | 60 Kg - 110/90 UTS - On Running Line | Each | 150.00 | 310.82 | 46,623 |
| 66 | Outside Track | Each | 50.00 | 61.48 | 3,074 |
| 67 | On Running Line | Each | 150.00 | 78.7 | 11,805 |
| 68 | Drilling holes of specified size for bond holes with 7.2mm dia drill twist to correct spacing and location on 60kg/52kg rails on cess or under traffic block with contractor's tools and plant, equipment, consumable, labour etc complete as directed by the Engineer in charge at site. | Each | 30.00 | 44.75 | 1,342.5 |
| 69 | Sleeper Spacing, Re-spacing / Squaring of sleeper by Hydraulic Sleeper Spacer with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in- charge. Hydraulic Sleeper Spacer shall be as per RDSO's Specification No. TM/SM/17, dated 31.03.1992. | Each | 1000.00 | 75.84 | 75,840 |
| 70 | Measuring of Toe Load of ERC during service in field by Electronic Toe Load Measuring Device with contractor's tools & plants, equipment, consumable with all lead & lift etc. complete, as directed by Engineer in-charge. Electronic Toe Load Measuring Device will be as per RDSO's Specification No.TM/SM/ETLMD/218 dated 13.9.2012. | Each | 1000.00 | 4.69 | 4,690 |
| 71 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 50.00 | 216.82 | 10,841 |
| 72 | I n Wagon where mechanical handling is possible and traffic block is not required or in Truck/trailer. | MT | 50.00 | 206.4 | 10,320 |
| 73 | For lead up to 500 metre. | MT | 50.00 | 410.32 | 20,516 |
| 74 | For lead beyond 500 metre and up to 1 Km. | MT | 50.00 | 529.6 | 26,480 |
| 75 | Extra to Item no. 171031 and 171032 with contractor's Rail Dolly / Dip Lorry | MT | 50.00 | 39.79 | 1,989.5 |
| 76 | For lead up to 500 metres | MT | 50.00 | 319.49 | 15,974.5 |
| 77 | For lead beyond 500 metre and up to 1 Km | MT | 50.00 | 474.19 | 23,709.5 |
| 78 | Extra to Item no. 172031 and 172032 with contractor's Rail Dolly/Dip Lorry. | MT | 50.00 | 42.49 | 2,124.5 |
| 79 | Rails, switches, crossings, SEJ, Glued Joints, Check Rails etc. | MT | 50.00 | 478.8 | 23,940 |
| 80 | All type of PSC sleepers | MT | 100.00 | 516.47 | 51,647 |
| 81 | P.Way fittings of all types and other similar loose items | MT | 25.00 | 414.33 | 10,358.25 |
| 82 | Renewal of existing running rail and guard rails of all sections on bridge portion over Steel Channel sleepers/PSC sleepers under traffic block including leading of new rails, fittings, refixing all the fastenings as per approved drawings including cutting of rails, drilling of holes to running and guard rails as required as per drawing and leading back the released rails and fittings and stacking at nominated place clear of infringements with all leads & lifts tools and consumables complete and as directed. | TRM | 100.00 | 784.29 | 78,429 |
| 83 | Involving Rubber Pad | Each | 200.00 | 62.55 | 12,510 |
| 84 | Not involving Rubber Pad | Each | 200.00 | 34.64 | 6,928 |
| 85 | Renewal of existing guard rails of all rail sections on bridge portion over wooden/PSC/steel channel sleepers excluding flared ends duly leading new guard rails including cutting of rails, drilling holes to the guard rails as required and as per drawings, refixing with all fastenings, and leading back the released rail, stacking at nominated place clear of infringements with all leads & lifts complete and as directed. | TRM | 50.00 | 244.94 | 12,247 |
| 86 | Clearing waterway of major & minor bridges by removing weeds / shrubs / bushes, removing silt deposit, filling scours, if any up to 10 metre from centre of bridge on either side including disposing waste and silt away from waterway. Note: Rate is for a single line and per metre of bridge span. | Metre | 800.00 | 228.69 | 1,82,952 |
| 87 | Fabrication, supplying and fixing 600mm x 450mm Bridge Board made from 16 SWG MS Sheet duly welded or riveted to back support of two 600mm long horizontal angles of size 25mm x 25mm x 3mm & two numbers 2.5 metre long vertical support of MS Angle of size 50mm x 50mm x 5mm, welded / rivetted to board. Vertical supports shall have split ends for proper fixing in ground. Vertical supports of board shall be embedded in ground in M 20 Cement Concrete blocks of size 300mm x 300mm x 300mm, complete job including painting & writing of subject matter on bridge board, as directed by Engineer - In charge Note: Excavation & concrete work will be paid separately. | Each | 30.00 | 3,801.55 | 1,14,046.5 |
| 88 | Manufacturing and supply of circular STO P Disc of 600mm dia for fixing on emergency chains at level crossings as given in IRPWM including providing Retro reflective sheet fully covered over board confirming to type-IV of ASTM-D4956 in red back ground colour and text "STOP" of white colour over back ground. The circular board shall consists of 2mm thick Aluminium sheet fixed to 1.5mm thick MS Sheet of 600mm dia with suitable sized aluminium alloy rivets @ 20 cm c/c to back-support .Retro reflective sheet is to be pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class-2 of ASTM-D-4956-01.A vertical holding stand of 1000 mm length x15mm thick to be jointed to back side of board along with a hook for fixing emergency chain as directed by Engineer In charge. | Each | 30.00 | 4,239.71 | 1,27,191.3 |
| 89 | For erection | Each | 20.00 | 272.4 | 5,448 |
| 90 | For removal | Each | 20.00 | 223.3 | 4,466 |
| 91 | Providing and fixing Trolley Refuge of size 3.0m x3.0m on cess, placing with released unserviceable PSC sleepers and keeping them at all four sides of refuge and also placing as matting inside the refuge by keeping them in upside down position with a minimum of 14 sleepers including levelling with earth, excavation, all lead and lift, crossing of tracks, leading the sleepers with in a free lead and lift, handling etc., with all contractor's men material complete and as directed by the Engineer-in-charge. Note: Earth-work will to be paid separately under relevant item. | Each | 10.00 | 4,788.41 | 47,884.1 |
| 92 | JCB Backhoe Loaders 3DX Plus or similar with minimum 1.10 cum bucket capacity | Hour | 600.00 | 846.09 | 5,07,654 |
| 93 | Hydra or similar tyre mounted Pick-n- Carry crane of 12T capacity for misc. works of handling of material | Hour | 50.00 | 2,118.4 | 1,05,920 |
| 94 | Tractor with Trolley for local transportation or other misc. works. | Hour | 150.00 | 599.84 | 89,976 |
| Schedule total | ₹2,59,09,664.87 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Annexure-F.pdf
ATTACHMENT
JPOSTDepartment.pdf
ATTACHMENT
PCECircular88forQualityofWorks.pdf
ATTACHMENT
IRSGCCApril-2022.pdf
ATTACHMENT
AdvancecorrectionslipNo01to11GCCApril2022.pdf
ATTACHMENT
ImplementationofContractore-MB.pdf
ATTACHMENT
Annexure-VIB.pdf
ATTACHMENT
033SpecialCondition.pdf
ATTACHMENT
LETTERFORWORKSITESAFETYWITHAGENCIESLIKERVNLDFCCIL.pdf
ATTACHMENT
Dainikkaaryanishpaadananumatipatra.pdf
ATTACHMENT
DRMBRC033of2026-27C_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .