Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹18.5 L+₹1.9 L (11.5%)Rejected-AOC | L2 | Rejected-AOC Second Lowest | |
| 3 | L3₹20.0 L+₹3.4 L (20.5%)Rejected-AOC | L3 | Rejected-AOC Third Lowest | |
| 4 | L4₹20.9 L+₹4.4 L (26.3%)Rejected-Finance | L4 | Rejected-Finance Fourth Lowest |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
24 Jun 2022, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major Sameer Wadekar
Holta Cantt, Palampur
CERTAIN B AND R REPAIRS OTHER MISC REPAIRS AND REPLACEMENT TO ZONE C AND CENTRAL INSTITUTE AT ALHILAL MIL STN
2022_MES_526695_1
GEP/ - /2022-23
Open Tender
Civil Works
Item Rate
180 days
Alhilal Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Palampur
₹40,000
Yes
9 Jul 2022
27 May 2022
27 Jun 2022
27 May 2022
24 Jun 2022
10 Jun 2022
60 days
Amount
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc. 1.50 sqm each, and removing from site, complete all as specified and directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.50 sqm but n.exc. 4 sqm each and removing from site, complete all as spfd and directed.
Taking down shutters of any description exc 1sqm but n. exc 2 sqm each complete.
Refixing shutters in the same opening and of any discription exc 1sqm but n. exc 2 sqm each.
M&L pressed steel frames of size 165mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.
M&L pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed.
M&L mild steel hold fast & similar articles confirming to Fe-290 Gde E-165 complete.
M&L plain cement concrete, M-15 (Nominal mix), type B-0 (using 12.5mm graded crushed stone aggregates) as in filling of steel chowkats or frames, cills and hold fast etc.complete all as specified and as directed.
S&F 35mm thick, 2nd class hard wood factory made, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.
S&F 35mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass or gauge, etc. (whout sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) , complete all as specified and directed.
M&L preparation of new wooden surfaces of any description not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.
S&F, solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, supplying and fixing in opening as per specifications & directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat molded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement complete all as specified & directed.
S&F steel windows with side hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.
S&F Steel Ventilator with top hung shutter including hinges, steel peg stay complete all as specified.
S&F mild steel framed work such as grills , gratings etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars barred iron doors ladders framed balusters walkways railings framework of water tanks and similar work conforming to Fe 290 Grade E-165 complete all as specified and directed.
M&L preparation of new surfaces of steel of any description, over 10 cm width or girth not other wise described and appliying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer, complete all as specified and directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete.
S&F 4 mm thick figured glass pin head type and glazing with oil putty in squares n.exc. 0.50 sqm in each pane, complete all as specified and directed
S&F 100 mm size mild steel cold rolled butt hinges, medium weight,complete all as specified and directed.
S&F 150mm size (lenth of bolt) aluminium anodised barrel tower bolt of extruded section, 150mm long complete all as specified and directed.
S&F 150mm long aluminium handle, cast type, anodised complete all as specified and directed.
S&F mild steel sliding door bolts, 300 mm long, plate type, stove enamelled black, with bright bolts not less than 12mm dia with & including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate etc complete.
S&F in repairs 300mm long MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
S&F 2nd class hard wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed.
S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F in repairs stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering etc. complete all as specified and as directed.
S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an olour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified
M&L pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, facia and fixed with self tapping screws as specified.
S&F mild steel roof trusses (framed), trussed, purlins, crane gantries. rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W (Grade E-250) complete all as specified and directed.
Dismantilng wall and ceiling boards (fibre, pulp, insulation etc ) or insulation boards / slabs/ blankets any thickness, including cover fillets of any description complete all as specified and directed.
S&F false ceilling of 8mm thick gypsum board tiles of size 600mm x 600 mm fixed with anodised aluminium snap grid frame work for false ceiling including hangers 6mm dia GI adjusting level fixed to roof slab by means of ceiling cleats made out of G.I. Flat 40mm x 3mm size 60mm long and expansion hold fasterns 12.5mm dia, 40mm long complete all as specified and directed.
S&F Clip-in false ceiling system with plain steel beveled edged tile (600mm x 600mm) manufactured out of 0.70mm aluminum sheet having powder coating with 60 microns polyester paint on front side. Two sides of each tile shall be rised and piped and stopped to ensure postive engagement into the spring clip-in profile allowing for demounting of indivual tiles.The rigid suspension system consists of rows of galvanized steel 0.50 mm thick clip- in profile of size 38mm x 20mm and installed at 600 mm c/c spacing to support the tiles clip-in profiles shall be suspended and jointed form galvanized steel 'C' channels of size 10mm x 38mm x10mm with hold on clamps at spacing as specified by manufacture. Suspension angles shall be suspended from the roof structure by GI ceiling brackets as per manufacture instructions and jointed to the 'C' channels. The tiles shall be held in place by pressure clips 'C' at spacing as per manufactures instructions. GI wall angle shall be used on wall angle shall be used on wall of size 20 mm x 30 mm x 20mm and 0.5 mm thick with matching the colour with tiles all as per manufacture specifications/instructions and including necessary scaffolding all as specifed and directed by Engr-in-charge and GE.
Dismantling timber scantling 40 sq cm & over in section, any position in unframed work.
M&L for 2nd class hard wood (Kail) as in scantling and similar work, clean sawn (framed/unframed) timber fixed in position, complete all as specified and directed.
M&L 2nd class hard wood as in verandah posts and similar work, wrought framed timber fixed in position 40 Sqcm and over in section an any position framed or unframed work etc, complete all as specified and directed.
M&L water proofing treatment on RCC roof etc. comprising with the following operation & as specified herein below:- (a) Taking down existing old tarfelt, bituminous compound including cleaning & removing debris as specified and as directed (b) Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) (c) Preparation & cleaning of fully dried cement concrete surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.30 litres per sqm conforming IS-3384 (e) A layer of APP based polymeric membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric.The over lap shall be minimum 75mm in length side and 100mm with side. Application of polymeric membrane shall be by torch application as specified and as directed. (f) Apply one coat of aluminium paint on roof treatment surface complete all as specified and directed.
M&L 10mm thick plaster on fair faces of concrete surface in CM 1:3 to be finished even and smooth without using extra cement under roof treatment mixed with water proofing compound as per manufacturer's instructions complete all as specififed and directed. Note: WPC compound shall be measured and paid seperately.
M&L plain cement concrete, M-15 (Nominal Mix), type B-0, (using 12.5mm graded crushed stone aggregates) as in roof kerbs, mud stops, roof padding etc using water proofing compound as per manufacturer's instructions complete all as specififed and directed. Note: WPC compound shall be measured and paid seperately.
Supply only liquid water proofing compound.
Demolition of floor, hearth or wall tiling including cement mortar bedding or backing coat, removing rubbish off the premises, removal and depositing where directed and leaving the work clear of any plastering complete all as specified and directed.
M&L coloured glazed ceramic tiles in vertical surfaces 300 x 450x 7mm/ 300 x 600 x 7mm as in skirting/dado etc, over and including 10mm thick backing coat in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles complete all as specified and directed.
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, as on vertical surfaces cut to size as required such as skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in cement mortar 1:4, complete all as specified and directed.
M&L 25mm thick plain cement concrete, M-15 1:2:4 (Nominal Mix) type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base of floors finished rough surface to receive floor finisheds, complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using (40mm gradedcrushed stone aggregate) as in sub base of tiling complete all as specified and directed.
M&L 60mm thick, M-40 grade, machine pressed precast concrete interlocking paver block with grey cement and no pigment laid in floor, any shape and size conforming to IS-15658-2006 complete all as specified and directed.
M&L fine aggregate (sand) for cushioning of paver blocks complete all as specified and directed.
S&F anodised aluminium door shutter of Aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified
S&F anodised aluminium window shutter (Two track glass pane shutter, wire mash Shutter) of Aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprane packing, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified.
S&F powder coated anodised aluminium frame for doors, windows, ventilators 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified
S&F door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed etc. complete all as specified
S&F in repairs 25mm drapery rod of stainless steel with brackets complete all as specified and as directed.
S&F prelaminated particle board 9mm thick exterior grade decorative choice both side lamination fixed with aluminium frame work complete all as specified
Dismantling of stone slabs, paver blocks and tiles of any description or thickness in floors, laid dry and pointed, bedded and pointed in any mortar aprons etc. complete all as specified and directed.
M&L machine cut kota stone slab flooring 18 to 20mm thick laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror face) complete over and including 15 mm thick screed in CM (1:4) complete all as specified and directed.
M&L machine cut kota stone slab 18 to 20mm thick in riser of steps,skirting,dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing (mirror face) complete over and including 10 mm thick backing coat in CM (1:4) complete all as specified and directed.
M&L 18 to 20mm thick granite (of any type) tiles, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone incl grinding and polishing complete over 15mm thick screed bed in CM 1:6, complete all as specified and directed.
M&L non-skid full body coloured ceramic step riser tiles 10mm to 12mm thick (rectangular) polished of size 900mm x 300mm/ 1000mm x 300mm as in step riser etc laid over and including 10mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facing, dressed stone work precast concrete articles complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius, using old size brick, build in CM 1:6, complete all as specified and directed.
M&L walling of random rubble stone masonry uncoursed well bonded, bedded and solidly hearted, built in cement mortar 1:6, complete all as specified and directed.
Extra over stone walling for hammer dressing to face stones & dressing to face beds and joints as specified at RR walling uncoarsed or brought upto coarse, max depression on face from straight edge held against the dressed surface n.exc 20 mm granite or trap stone complete all as specified and directed.
M&L PCC M-15 (1:2:4), type B-1 using 20mm graded crushed stone aggregate as in bed plates, coping, kerbs, lintels & other similar works including weathering slightly rounded or chamferred angles and throating complete all as specified & directed.
Demolition of cement concrete unreinforced in ground floors, kota stone, granite flooring, tiles flooring and paving's not exceeding 15cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance not exceeding 100m complete all as specified & directed.
M&L PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) mass concrete of foot path hard standings etc. complete all as specified.
Extra forming fain finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds mitred/stopped end etc
M&L plain cement concrete, M-10 1:3:6 (Nominal Mix) type C-1 (using 20mm graded crushed stone aggregates) as in surface channels or drains etc, complete all as specified and directed.
M&L 75 mm thick PCC (1:3:6) type C-1 using 20 mm graded crushed stone aggregate laid in alternative bays area not exc 2 sqm each as in plinth protection laid to slope of 1 in 12 including finishing the surface even & fair & filling the joints (6 mm wide) with mastic filling i.e one part of bitumen 85/25 or VG-30 and 3 parts of sand by weight complete all as specified & directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided, complete all as specified and directed.
M&L RCC M-15 (Nominal mix), type B-1 (using 20mm stone aggre) as in slab supported on walls, beams and columns in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like, complete all as spfd and directed. Note: Reinforcement shall be measured and paid separately under relevant item.
M&L form work to sides and soffits of suspended slab, such as roof slab, floor slab, landing and similar work n.exc. 200mm thick (horizontal or sloping) for fair finished surfaces, complete all as specified and directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
M&L TMT bar 6 to 8mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for column, hooking end and binding with and incl mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and directed.
Taking down cement plaster of any description on brick or stone or cement concrete block walls etc including raking out joints, hacking for key, scrubbing down with water etc, and removal of rubbish off the premises and leave the work clear of any plastering complete all as specified and directed.
M&L 15mm thick plaster on brick/stone masonry or other than fair faces of brick wall in CM 1:6 finished even and smooth without using extra cement, complete all as specified and directed.
M&L 15mm thick plaster on fair faces of brick work / stone masonry, concrete surface in cm 1:4 to be finished even and smooth with out suing extra cement using WPC as per manufacturing instruction.
M&L 10mm thick plaster on concrete surfaces as in facia or ceiling in CM 1:3 finished even and fair without using extra cement, complete all as specified and directed.
M&L two coats of white wash on newly plastered ceiling surfaces including preparation of surfaces complete all as specified and directed.
M&L one coat of white wash on old surfaces on ceiling including preparation of old surfaces complete all as specified and directed.
M&L two coats of oil bound distemper over a coat of chalk whiting on newly plastered wall surfaces complete all as specified and as directed.
M&L two coats of oil bound distemper over a coat of chalk whiting on old plastered wall surfaces complete all as specified and as directed.
Preparation of new plastered surfaces of walls by complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paints having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004,alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additived @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on new surface complete all as specified and directed.
Preparation of old plastered surfaces of walls by complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paints having VOC content less than 50 gms/litre, and UV resistance as per IS 15489-2004,alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additived @1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.90litre/10 sqm on new surface complete all as specified and directed.
Extra over rendering or plastering for work in isolated widths or in widths not forming party of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and directed.
Dismantling of 75/100/110mm bore cast/PVC drain/sewage pipes with fittings in any location (wall, floor, trench) complete all as specified and directed.
S&F PVC (SWR) pipes 75mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore, single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.
S&F PVC (SWR) bends 75mm bore complete all as specified and directed.
S&F PVC (SWR) bends 110mm bore complete all as specified and directed.
S&F PVC (SWR) branch piece,110mm bore single (single Y) equal or unequal complete all as specified and directed.
S&F PVC SWR floor trap, plain with grating including jointing with solvent cement and making good distrubed surfaces complete all as specified and directed.
S&F PVC (SWR) 110mm bore vent cowl complete all as specified and directed.
S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball ( minimum weight 455 gms) screwed for iron pipe including dismantling of existing water tank complete all as specified and directed.
S&F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25mm size ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball ( minimum weight 455 gms) screwed for iron pipe including dismantling of existing water tank complete all as specified and directed.
Disconnecting existing tanks of capacity exc. 250 but n. exc. 500 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc. from tanks and from moulds of circulating pipe, etc complete all as specified and directed
S&F in repair vitreous china semi pedestal pattern wash down water closet pan white connection to trap 'P' or 'S' and flush pipe etc including seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one all as specified and as directed.
S&F vitreous china squatting pan water closet, orissa pattern, size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe complete including taking down old unserviceable one and making good distrubed surfaces complete all as specified and directed.
S&F vitreous china, wash hand basin with pedastral (white) of size 550mm x 400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper, PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends complete including taking down old unserviceable one complete all as specified and directed.
S&F in repairs 10 litres capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe, fixed in position and connecting complete.
S&F PVC Connections 15 mm size with PTMT nuts of length 450mm complete all as specified.
S&F in repairs brass chromium plated tubular towel rail, 20mm dia, D type 60cm long , fixed to wall with CP brass screw and PVC rawl plugs, complete all as specified and directed.
S&F in repairs, fancy type, chromium plated, bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified & directed.
M&L 15mm thick plaster in cement plaster in CM 1:4 using water proofing compound as in sunken floor complete all as specified and directed. Note: Water proofing compound shall be paid separately.
M&L applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per sqm including cleaning surfaces complete all as specified and directed.
M&L bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per sqm per coat complete all as specified and directed.
M&L polythene film, black, 50 micron laid in floors complete all as specified and directed.
S&F in repairs pillar taps 15 mm bore cast alloy with capasten head fancy type,chromium plated screwed down high pressure with without lettered 'Hot' or Cold with long screwed shanks and fly-nuts,screwed for iron pipe compete all as specified and directed.
S&F in repairs 15 mm bore stop valve/angle cock cast copper alloy fancy type,chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F in repairs 25 mm size gun- metal globe or gate valves with wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&Fin repairs swivel shower of PTMT any colour for fixing with 15mm dia pipe (Min weight 40 gms) with shower arm 15mm size 195mm long with bend of 45 degree with flange of PTMT any colour (Min weight 40 gms) complete All as specified and as directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
Taking up or down 15mm bore steel water tubing and connection, including cleaning for refixing or removal to store, complete all as specified and directed.
All as per the description of serial item No 120 above but 20mm bore pipe.
All as per the description of serial item No 120 above but 25mm bore pipe.
S&F steel water tubing, 15 mm bore, galvanised , "medium grade" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed.
All as per the description of serial item No 123 above but 20mm bore pipe.
All as per the description of serial item No 123 above but 25mm bore pipe.
M&L rendering 15mm thick plaster on fair faces of brick work or concrete surfaces of chajjas, projections etc. in cement mortar 1:3 finished even and smooth without using extra cement including taking down plaster, complete all as specified and directed.
Cutting chase, pinning in making good to faceing where required and pointing in cement mortar 1:3 to ends or edges of landing,steps, cills, sunshades, shelves,lintels,etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm in girth complete all as specified and directed.
M/S SAI ENGINEER
M/S DOGRA CONSTRUCTION CO
VIVEKA ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .